Staging: rt3070: remove dead UCOS code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/rt3070/common/ba_action.c b/drivers/staging/rt3070/common/ba_action.c
index 43b5ac1..2ad68cb 100644 (file)
--- a/drivers/staging/rt3070/common/ba_action.c
+++ b/drivers/staging/rt3070/common/ba_action.c
@@ -1562,9 +1562,6 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
 #ifdef LINUX
                        NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
 #endif
-#ifdef UCOS
-                       NdisMoveMemory(net_pkt_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
-#endif
                }
 #endif // CONFIG_STA_SUPPORT //
        }

diff --git a/drivers/staging/rt3070/common/cmm_info.c b/drivers/staging/rt3070/common/cmm_info.c
index 767c9db..c514c90 100644 (file)
--- a/drivers/staging/rt3070/common/cmm_info.c
+++ b/drivers/staging/rt3070/common/cmm_info.c
@@ -1833,7 +1833,6 @@ CHAR *GetAuthMode(CHAR auth)
        return "UNKNOW";
 }
 
-#if 1 //#ifndef UCOS
 /*
     ==========================================================================
     Description:
@@ -2048,7 +2047,6 @@ VOID RTMPIoctlGetMacTable(
 
        kfree(msg);
 }
-#endif // UCOS //
 
 #ifdef DOT11_N_SUPPORT
 INT    Set_BASetup_Proc(

diff --git a/drivers/staging/rt3070/rt_ate.c b/drivers/staging/rt3070/rt_ate.c
index 245792f..b636015 100644 (file)
--- a/drivers/staging/rt3070/rt_ate.c
+++ b/drivers/staging/rt3070/rt_ate.c
@@ -27,10 +27,6 @@
 
 #include "rt_config.h"
 
-#ifdef UCOS
-INT IoctlResponse(PUCHAR payload, PUCHAR msg, INT len);
-#endif // UCOS //
-
 #define ATE_BBP_REG_NUM        168
 UCHAR restore_BBP[ATE_BBP_REG_NUM]={0};
 
@@ -51,11 +47,6 @@ extern UCHAR NUM_OF_3020_CHNL;
 //2008/07/10:KH adds to support 3070 ATE-->
 #endif // RT30xx //
 
-#ifdef UCOS
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-#endif // UCOS //
-
 static CHAR CCKRateTable[] = {0, 1, 2, 3, 8, 9, 10, 11, -1}; /* CCK Mode. */
 static CHAR OFDMRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, -1}; /* OFDM Mode. */
 static CHAR HTMIXRateTable[] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}; /* HT Mix Mode. */
@@ -2444,7 +2435,6 @@ INT       SET_ATE_3070RF_Proc(
                TRUE if all parameters are OK, FALSE otherwise
     ==========================================================================
 */
-#ifndef UCOS
 INT Set_ATE_Load_E2P_Proc(
        IN      PRTMP_ADAPTER   pAd,
        IN      PUCHAR                  arg)
@@ -2539,44 +2529,6 @@ INT Set_ATE_Load_E2P_Proc(
     return ret;
 
 }
-#else
-INT Set_ATE_Load_E2P_Proc(
-       IN      PRTMP_ADAPTER   pAd,
-       IN      PUCHAR                  arg)
-{
-       USHORT                  WriteEEPROM[(EEPROM_SIZE/2)];
-       struct iwreq    *wrq = (struct iwreq *)arg;
-
-       ATEDBGPRINT(RT_DEBUG_TRACE, ("===> %s (wrq->u.data.length = %d)\n\n", __func__, wrq->u.data.length));
-
-       if (wrq->u.data.length != EEPROM_SIZE)
-       {
-               ate_print("%s: error length (=%d) from host\n",
-                          __func__, wrq->u.data.length);
-               return FALSE;
-       }
-       else/* (wrq->u.data.length == EEPROM_SIZE) */
-       {
-               /* zero the e2p buffer */
-               NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE);
-
-               /* fill the local buffer */
-               NdisMoveMemory((PUCHAR)WriteEEPROM, wrq->u.data.pointer, wrq->u.data.length);
-
-               do
-               {
-                               /* write the content of .bin file to EEPROM */
-                               rt_ee_write_all(pAd, WriteEEPROM);
-
-               } while(FALSE);
-               }
-
-    ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== %s\n", __func__));
-
-    return TRUE;
-
-}
-#endif // !UCOS //
 
 INT Set_ATE_Read_E2P_Proc(
        IN      PRTMP_ADAPTER   pAd,
@@ -4300,20 +4252,6 @@ static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
 static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len);
 static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len);
 
-#ifdef UCOS
-int ate_copy_to_user(
-       IN PUCHAR payload,
-       IN PUCHAR msg,
-       IN INT    len)
-{
-       memmove(payload, msg, len);
-       return 0;
-}
-
-#undef copy_to_user
-#define copy_to_user(x,y,z) ate_copy_to_user((PUCHAR)x, (PUCHAR)y, z)
-#endif // UCOS //
-
 #define        LEN_OF_ARG 16
 
 VOID RtmpDoAte(
@@ -4379,9 +4317,7 @@ VOID RtmpDoAte(
                // We will get this command either QA is closed or ated is killed by user.
                case RACFG_CMD_ATE_STOP:
                        {
-#ifndef UCOS
                                INT32 ret;
-#endif // !UCOS //
 
                                ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n"));
 
@@ -4418,36 +4354,12 @@ VOID RtmpDoAte(
                                        // kill ATE daemon when leaving ATE mode.
                                        // We must kill ATE daemon first before setting ATESTOP,
                                        // or Microsoft will report sth. wrong.
-#ifndef UCOS
                                        ret = kill_proc(pAdapter->ate.AtePid, SIGTERM, 1);
                                        if (ret)
                                        {
                                                ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name));
                                        }
-#endif // !UCOS //
-                               }
-
-#ifdef UCOS
-                               // Roger add to avoid error message after close QA
-                               if (pAdapter->CSRBaseAddress == RT2860_CSR_ADDR)
-                               {
-
-                                       // prepare feedback as soon as we can to avoid QA timeout.
-                                       pRaCfg->length = htons(2);
-                                       pRaCfg->status = htons(0);
-
-                                       wrq->u.data.length = sizeof(pRaCfg->magic_no) + sizeof(pRaCfg->command_type)
-                                                                               + sizeof(pRaCfg->command_id) + sizeof(pRaCfg->length)
-                                                                               + sizeof(pRaCfg->sequence) + ntohs(pRaCfg->length);
-
-                                       ATEDBGPRINT(RT_DEBUG_TRACE, ("wrq->u.data.length = %d\n", wrq->u.data.length));
-                       if (copy_to_user(wrq->u.data.pointer, pRaCfg, wrq->u.data.length))
-                       {
-                               ATEDBGPRINT(RT_DEBUG_TRACE, ("copy_to_user() fail in case RACFG_CMD_AP_START\n"));
-                           Status = -EFAULT;
-                       }
                                }
-#endif // UCOS //
 
                                // AP might have in ATE_STOP mode due to cmd from QA.
                                if (ATE_ON(pAdapter))

diff --git a/drivers/staging/rt3070/rt_ate.h b/drivers/staging/rt3070/rt_ate.h
index 85cf7c1..011fed7 100644 (file)
--- a/drivers/staging/rt3070/rt_ate.h
+++ b/drivers/staging/rt3070/rt_ate.h
@@ -28,7 +28,6 @@
 #ifndef __ATE_H__
 #define __ATE_H__
 
-#ifndef UCOS
 #define ate_print printk
 #define ATEDBGPRINT DBGPRINT
 
@@ -38,33 +37,6 @@
 #define EEPROM_BIN_FILE_NAME  "/etc/Wireless/RT2870STA/e2p.bin"
 #endif // CONFIG_STA_SUPPORT //
 #endif // RT2870 //
-#else // !UCOS //
-#define fATE_LOAD_EEPROM                                               0x0C43
-#ifdef CONFIG_PRINTK
-extern INT ConsoleResponse(IN PUCHAR buff);
-extern int (*remote_display)(char *);
-extern void puts (const char *s);
-
-/* specificly defined to redirect and show ate-related messages to host. */
-/* Try to define ate_print as a macro. */
-#define ate_print(fmt, args...)                 \
-do{   int (*org_remote_display)(char *) = NULL;   \
-       org_remote_display = remote_display;\
-       /* Save original "remote_display" */\
-       remote_display = (int (*)(char *))ConsoleResponse;           \
-       printk(fmt, ## args);                       \
-       /* Restore the remote_display function pointer */        \
-       remote_display = org_remote_display; }while(0)
-
-#define ATEDBGPRINT(Level, Fmt)        \
-{                                   \
-    if ((Level) <= RTDebugLevel)      \
-    {                               \
-        ate_print Fmt;                                 \
-    }                               \
-}
-#endif // CONFIG_PRINTK //
-#endif // !UCOS //
 
 #define ATE_ON(_p)              (((_p)->ate.Mode) != ATE_STOP)
 

diff --git a/drivers/staging/rt3070/rt_config.h b/drivers/staging/rt3070/rt_config.h
index 2437a6a..498b2ec 100644 (file)
--- a/drivers/staging/rt3070/rt_config.h
+++ b/drivers/staging/rt3070/rt_config.h
@@ -41,12 +41,6 @@
 #define        __RT_CONFIG_H__
 
 #include    "rtmp_type.h"
-#ifdef UCOS
-#include "includes.h"
-#include <stdio.h>
-#include       "rt_ucos.h"
-#endif
-
 #ifdef LINUX
 #include       "rt_linux.h"
 #endif