r6040: fix null pointer access and tx timeouts

This patch fixes a null pointer access in r6040_rx due
to lp->dev not being initialized.

Fix the TX timeouts, TX irq was not re-enabled on RX irq

Signed-Off-By: Joerg Albert <jal2@gmx.de>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 4e67884..d277deb 100644 (file)
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -91,6 +91,14 @@
 #define MISR           0x3C    /* Status register */
 #define MIER           0x40    /* INT enable register */
 #define  MSK_INT       0x0000  /* Mask off interrupts */
+#define  RX_FINISH     0x0001  /* RX finished */
+#define  RX_NO_DESC    0x0002  /* No RX descriptor available */
+#define  RX_FIFO_FULL  0x0004  /* RX FIFO full */
+#define  RX_EARLY      0x0008  /* RX early */
+#define  TX_FINISH     0x0010  /* TX finished */
+#define  TX_EARLY      0x0080  /* TX early */
+#define  EVENT_OVRFL   0x0100  /* Event counter overflow */
+#define  LINK_CHANGED  0x0200  /* PHY link changed */
 #define ME_CISR                0x44    /* Event counter INT status */
 #define ME_CIER                0x48    /* Event counter INT enable  */
 #define MR_CNT         0x50    /* Successfully received packet counter */
@@ -139,10 +147,10 @@ MODULE_AUTHOR("Sten Wang <sten.wang@rdc.com.tw>,"
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet driver");
 
-#define RX_INT                         0x0001
-#define TX_INT                         0x0010
-#define RX_NO_DESC_INT                 0x0002
-#define INT_MASK                 (RX_INT | TX_INT)
+/* RX and TX interrupts that we handle */
+#define RX_INT                 (RX_FINISH)
+#define TX_INT                 (TX_FINISH)
+#define INT_MASK               (RX_INT | TX_INT)
 
 struct r6040_descriptor {
        u16     status, len;            /* 0-3 */
@@ -502,8 +510,6 @@ static int r6040_rx(struct net_device *dev, int limit)
                struct r6040_descriptor *descptr = priv->rx_remove_ptr;
                struct sk_buff *skb_ptr;
 
-               /* Disable RX interrupt */
-               iowrite16(ioread16(ioaddr + MIER) & (~RX_INT), ioaddr + MIER);
                descptr = priv->rx_remove_ptr;
 
                /* Check for errors */
@@ -639,8 +645,9 @@ static irqreturn_t r6040_interrupt(int irq, void *dev_id)
 
        /* RX interrupt request */
        if (status & 0x01) {
+               /* Mask off RX interrupt */
+               iowrite16(ioread16(ioaddr + MIER) & ~RX_INT, ioaddr + MIER);
                netif_rx_schedule(dev, &lp->napi);
-               iowrite16(TX_INT, ioaddr + MIER);
        }
 
        /* TX interrupt request */
@@ -687,7 +694,11 @@ static void r6040_up(struct net_device *dev)
                else
                        lp->phy_mode = (PHY_MODE & 0x0100) ? 0x8000:0x0;
        }
-       /* MAC Bus Control Register */
+       /* MAC Bus Control Register :
+        * - wait 1 host clock SDRAM bus request
+        * - RX FIFO : 32 bytes 
+        * - TX FIFO : 64 bytes 
+        * - FIFO transfer lenght : 16 bytes */
        iowrite16(MBCR_DEFAULT, ioaddr + MBCR);
 
        /* MAC TX/RX Enable */
@@ -1018,6 +1029,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
        SET_NETDEV_DEV(dev, &pdev->dev);
        lp = netdev_priv(dev);
        lp->pdev = pdev;
+       lp->dev = dev;
 
        if (pci_request_regions(pdev, DRV_NAME)) {
                printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");