* card: A-823PGH, A-823PGL, A-826PG
* driver: a823pgh, a823pgl, a826pg
*/
+
/*
-Driver: pcl812
-Description: Advantech PCL-812/PG, PCL-813/B,
- ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216,
- ICP DAS A-821PGH/PGL/PGL-NDA, A-822PGH/PGL, A-823PGH/PGL, A-826PG,
- ICP DAS ISO-813
-Author: Michal Dobes <dobes@tesnet.cz>
-Devices: [Advantech] PCL-812 (pcl812), PCL-812PG (pcl812pg),
- PCL-813 (pcl813), PCL-813B (pcl813b), [ADLink] ACL-8112DG (acl8112dg),
- ACL-8112HG (acl8112hg), ACL-8113 (acl-8113), ACL-8216 (acl8216),
- [ICP] ISO-813 (iso813), A-821PGH (a821pgh), A-821PGL (a821pgl),
- A-821PGL-NDA (a821pclnda), A-822PGH (a822pgh), A-822PGL (a822pgl),
- A-823PGH (a823pgh), A-823PGL (a823pgl), A-826PG (a826pg)
-Updated: Mon, 06 Aug 2007 12:03:15 +0100
-Status: works (I hope. My board fire up under my hands
- and I cann't test all features.)
-
-This driver supports insn and cmd interfaces. Some boards support only insn
-becouse their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
-Data transfer over DMA is supported only when you measure only one
-channel, this is too hardware limitation of these boards.
-
-Options for PCL-812:
- [0] - IO Base
- [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
- [2] - DMA (0=disable, 1, 3)
- [3] - 0=trigger source is internal 8253 with 2MHz clock
- 1=trigger source is external
- [4] - 0=A/D input range is +/-10V
- 1=A/D input range is +/-5V
- 2=A/D input range is +/-2.5V
- 3=A/D input range is +/-1.25V
- 4=A/D input range is +/-0.625V
- 5=A/D input range is +/-0.3125V
- [5] - 0=D/A outputs 0-5V (internal reference -5V)
- 1=D/A outputs 0-10V (internal reference -10V)
- 2=D/A outputs unknown (external reference)
-
-Options for PCL-812PG, ACL-8112PG:
- [0] - IO Base
- [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
- [2] - DMA (0=disable, 1, 3)
- [3] - 0=trigger source is internal 8253 with 2MHz clock
- 1=trigger source is external
- [4] - 0=A/D have max +/-5V input
- 1=A/D have max +/-10V input
- [5] - 0=D/A outputs 0-5V (internal reference -5V)
- 1=D/A outputs 0-10V (internal reference -10V)
- 2=D/A outputs unknown (external reference)
-
-Options for ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH, ACL-8216, A-826PG:
- [0] - IO Base
- [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
- [2] - DMA (0=disable, 1, 3)
- [3] - 0=trigger source is internal 8253 with 2MHz clock
- 1=trigger source is external
- [4] - 0=A/D channels are S.E.
- 1=A/D channels are DIFF
- [5] - 0=D/A outputs 0-5V (internal reference -5V)
- 1=D/A outputs 0-10V (internal reference -10V)
- 2=D/A outputs unknown (external reference)
-
-Options for A-821PGL/PGH:
- [0] - IO Base
- [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
- [2] - 0=A/D channels are S.E.
- 1=A/D channels are DIFF
- [3] - 0=D/A output 0-5V (internal reference -5V)
- 1=D/A output 0-10V (internal reference -10V)
-
-Options for A-821PGL-NDA:
- [0] - IO Base
- [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
- [2] - 0=A/D channels are S.E.
- 1=A/D channels are DIFF
-
-Options for PCL-813:
- [0] - IO Base
-
-Options for PCL-813B:
- [0] - IO Base
- [1] - 0= bipolar inputs
- 1= unipolar inputs
-
-Options for ACL-8113, ISO-813:
- [0] - IO Base
- [1] - 0= 10V bipolar inputs
- 1= 10V unipolar inputs
- 2= 20V bipolar inputs
- 3= 20V unipolar inputs
-*/
+ * Driver: pcl812
+ * Description: Advantech PCL-812/PG, PCL-813/B,
+ * ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216,
+ * ICP DAS A-821PGH/PGL/PGL-NDA, A-822PGH/PGL, A-823PGH/PGL, A-826PG,
+ * ICP DAS ISO-813
+ * Author: Michal Dobes <dobes@tesnet.cz>
+ * Devices: [Advantech] PCL-812 (pcl812), PCL-812PG (pcl812pg),
+ * PCL-813 (pcl813), PCL-813B (pcl813b), [ADLink] ACL-8112DG (acl8112dg),
+ * ACL-8112HG (acl8112hg), ACL-8113 (acl-8113), ACL-8216 (acl8216),
+ * [ICP] ISO-813 (iso813), A-821PGH (a821pgh), A-821PGL (a821pgl),
+ * A-821PGL-NDA (a821pclnda), A-822PGH (a822pgh), A-822PGL (a822pgl),
+ * A-823PGH (a823pgh), A-823PGL (a823pgl), A-826PG (a826pg)
+ * Updated: Mon, 06 Aug 2007 12:03:15 +0100
+ * Status: works (I hope. My board fire up under my hands
+ * and I cann't test all features.)
+ *
+ * This driver supports insn and cmd interfaces. Some boards support only insn
+ * becouse their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
+ * Data transfer over DMA is supported only when you measure only one
+ * channel, this is too hardware limitation of these boards.
+ *
+ * Options for PCL-812:
+ * [0] - IO Base
+ * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
+ * [2] - DMA (0=disable, 1, 3)
+ * [3] - 0=trigger source is internal 8253 with 2MHz clock
+ * 1=trigger source is external
+ * [4] - 0=A/D input range is +/-10V
+ * 1=A/D input range is +/-5V
+ * 2=A/D input range is +/-2.5V
+ * 3=A/D input range is +/-1.25V
+ * 4=A/D input range is +/-0.625V
+ * 5=A/D input range is +/-0.3125V
+ * [5] - 0=D/A outputs 0-5V (internal reference -5V)
+ * 1=D/A outputs 0-10V (internal reference -10V)
+ * 2=D/A outputs unknown (external reference)
+ *
+ * Options for PCL-812PG, ACL-8112PG:
+ * [0] - IO Base
+ * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
+ * [2] - DMA (0=disable, 1, 3)
+ * [3] - 0=trigger source is internal 8253 with 2MHz clock
+ * 1=trigger source is external
+ * [4] - 0=A/D have max +/-5V input
+ * 1=A/D have max +/-10V input
+ * [5] - 0=D/A outputs 0-5V (internal reference -5V)
+ * 1=D/A outputs 0-10V (internal reference -10V)
+ * 2=D/A outputs unknown (external reference)
+ *
+ * Options for ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH, ACL-8216, A-826PG:
+ * [0] - IO Base
+ * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
+ * [2] - DMA (0=disable, 1, 3)
+ * [3] - 0=trigger source is internal 8253 with 2MHz clock
+ * 1=trigger source is external
+ * [4] - 0=A/D channels are S.E.
+ * 1=A/D channels are DIFF
+ * [5] - 0=D/A outputs 0-5V (internal reference -5V)
+ * 1=D/A outputs 0-10V (internal reference -10V)
+ * 2=D/A outputs unknown (external reference)
+ *
+ * Options for A-821PGL/PGH:
+ * [0] - IO Base
+ * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ * [2] - 0=A/D channels are S.E.
+ * 1=A/D channels are DIFF
+ * [3] - 0=D/A output 0-5V (internal reference -5V)
+ * 1=D/A output 0-10V (internal reference -10V)
+ *
+ * Options for A-821PGL-NDA:
+ * [0] - IO Base
+ * [1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7)
+ * [2] - 0=A/D channels are S.E.
+ * 1=A/D channels are DIFF
+ *
+ * Options for PCL-813:
+ * [0] - IO Base
+ *
+ * Options for PCL-813B:
+ * [0] - IO Base
+ * [1] - 0= bipolar inputs
+ * 1= unipolar inputs
+ *
+ * Options for ACL-8113, ISO-813:
+ * [0] - IO Base
+ * [1] - 0= 10V bipolar inputs
+ * 1= 10V unipolar inputs
+ * 2= 20V bipolar inputs
+ * 3= 20V unipolar inputs
+ */
#include <linux/interrupt.h>
#include <linux/gfp.h>
#include "8253.h"
-#undef PCL812_EXTDEBUG /* if this is defined then a lot of messages is printed */
+/* if this is defined then a lot of messages is printed */
+#undef PCL812_EXTDEBUG
/* hardware types of the cards */
-#define boardPCL812PG 0 /* and ACL-8112PG */
-#define boardPCL813B 1
-#define boardPCL812 2
-#define boardPCL813 3
-#define boardISO813 5
-#define boardACL8113 6
-#define boardACL8112 7 /* ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH */
-#define boardACL8216 8 /* and ICP DAS A-826PG */
-#define boardA821 9 /* PGH, PGL, PGL/NDA versions */
-
-#define PCLx1x_IORANGE 16
-
-#define PCL812_CTR0 0
-#define PCL812_CTR1 1
-#define PCL812_CTR2 2
-#define PCL812_CTRCTL 3
-#define PCL812_AD_LO 4
-#define PCL812_DA1_LO 4
-#define PCL812_AD_HI 5
-#define PCL812_DA1_HI 5
-#define PCL812_DA2_LO 6
-#define PCL812_DI_LO 6
-#define PCL812_DA2_HI 7
-#define PCL812_DI_HI 7
-#define PCL812_CLRINT 8
-#define PCL812_GAIN 9
-#define PCL812_MUX 10
-#define PCL812_MODE 11
-#define PCL812_CNTENABLE 10
-#define PCL812_SOFTTRIG 12
-#define PCL812_DO_LO 13
-#define PCL812_DO_HI 14
-
-#define PCL812_DRDY 0x10 /* =0 data ready */
-
-#define ACL8216_STATUS 8 /* 5. bit signalize data ready */
-
-#define ACL8216_DRDY 0x20 /* =0 data ready */
-
-#define MAX_CHANLIST_LEN 256 /* length of scan list */
+#define boardPCL812PG 0 /* and ACL-8112PG */
+#define boardPCL813B 1
+#define boardPCL812 2
+#define boardPCL813 3
+#define boardISO813 5
+#define boardACL8113 6
+#define boardACL8112 7 /* ACL-8112DG/HG, A-822PGL/PGH, A-823PGL/PGH */
+#define boardACL8216 8 /* and ICP DAS A-826PG */
+#define boardA821 9 /* PGH, PGL, PGL/NDA versions */
+
+#define PCLx1x_IORANGE 16
+
+#define PCL812_CTR0 0
+#define PCL812_CTR1 1
+#define PCL812_CTR2 2
+#define PCL812_CTRCTL 3
+#define PCL812_AD_LO 4
+#define PCL812_DA1_LO 4
+#define PCL812_AD_HI 5
+#define PCL812_DA1_HI 5
+#define PCL812_DA2_LO 6
+#define PCL812_DI_LO 6
+#define PCL812_DA2_HI 7
+#define PCL812_DI_HI 7
+#define PCL812_CLRINT 8
+#define PCL812_GAIN 9
+#define PCL812_MUX 10
+#define PCL812_MODE 11
+#define PCL812_CNTENABLE 10
+#define PCL812_SOFTTRIG 12
+#define PCL812_DO_LO 13
+#define PCL812_DO_HI 14
+
+#define PCL812_DRDY 0x10 /* =0 data ready */
+
+#define ACL8216_STATUS 8 /* 5. bit signalize data ready */
+
+#define ACL8216_DRDY 0x20 /* =0 data ready */
+
+#define MAX_CHANLIST_LEN 256 /* length of scan list */
static const struct comedi_lrange range_pcl812pg_ai = { 5, {
BIP_RANGE(5),
int n;
int timeout, hi;
- outb(devpriv->mode_reg_int | 1, dev->iobase + PCL812_MODE); /* select software trigger */
- setup_range_channel(dev, s, insn->chanspec, 1); /* select channel and renge */
+ /* select software trigger */
+ outb(devpriv->mode_reg_int | 1, dev->iobase + PCL812_MODE);
+ /* select channel and renge */
+ setup_range_channel(dev, s, insn->chanspec, 1);
for (n = 0; n < insn->n; n++) {
- outb(255, dev->iobase + PCL812_SOFTTRIG); /* start conversion */
+ /* start conversion */
+ outb(255, dev->iobase + PCL812_SOFTTRIG);
udelay(5);
timeout = 50; /* wait max 50us, it must finish under 33us */
while (timeout--) {
int n;
int timeout;
- outb(1, dev->iobase + PCL812_MODE); /* select software trigger */
- setup_range_channel(dev, s, insn->chanspec, 1); /* select channel and renge */
+ /* select software trigger */
+ outb(1, dev->iobase + PCL812_MODE);
+ /* select channel and renge */
+ setup_range_channel(dev, s, insn->chanspec, 1);
for (n = 0; n < insn->n; n++) {
- outb(255, dev->iobase + PCL812_SOFTTRIG); /* start conversion */
+ /* start conversion */
+ outb(255, dev->iobase + PCL812_SOFTTRIG);
udelay(5);
timeout = 50; /* wait max 50us, it must finish under 33us */
while (timeout--) {
int chan = CR_CHAN(insn->chanspec);
int i;
- for (i = 0; i < insn->n; i++) {
+ for (i = 0; i < insn->n; i++)
data[i] = devpriv->ao_readback[chan];
- }
return i;
}
*/
static void pcl812_cmdtest_out(int e, struct comedi_cmd *cmd)
{
- printk("pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
+ printk(KERN_INFO "pcl812 e=%d startsrc=%x scansrc=%x convsrc=%x\n", e,
cmd->start_src, cmd->scan_begin_src, cmd->convert_src);
- printk("pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
+ printk(KERN_INFO "pcl812 e=%d startarg=%d scanarg=%d convarg=%d\n", e,
cmd->start_arg, cmd->scan_begin_arg, cmd->convert_arg);
- printk("pcl812 e=%d stopsrc=%x scanend=%x\n", e, cmd->stop_src,
- cmd->scan_end_src);
- printk("pcl812 e=%d stoparg=%d scanendarg=%d chanlistlen=%d\n", e,
- cmd->stop_arg, cmd->scan_end_arg, cmd->chanlist_len);
+ printk(KERN_INFO "pcl812 e=%d stopsrc=%x scanend=%x\n", e,
+ cmd->stop_src, cmd->scan_end_src);
+ printk(KERN_INFO "pcl812 e=%d stoparg=%d scanendarg=%d "
+ "chanlistlen=%d\n", e, cmd->stop_arg, cmd->scan_end_arg,
+ cmd->chanlist_len);
}
#endif
err++;
tmp = cmd->convert_src;
- if (devpriv->use_ext_trg) {
+ if (devpriv->use_ext_trg)
cmd->convert_src &= TRIG_EXT;
- } else {
+ else
cmd->convert_src &= TRIG_TIMER;
- }
+
if (!cmd->convert_src || tmp != cmd->convert_src)
err++;
return 1;
}
- /* step 2: make sure trigger sources are unique and mutually compatible */
+ /*
+ * step 2: make sure trigger sources are
+ * unique and mutually compatible
+ */
if (cmd->start_src != TRIG_NOW) {
cmd->start_src = TRIG_NOW;
struct comedi_cmd *cmd = &s->async->cmd;
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
+ printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_ai_cmd(...)\n");
#endif
if (cmd->start_src != TRIG_NOW)
devpriv->ai_n_chan = cmd->chanlist_len;
memcpy(devpriv->ai_chanlist, cmd->chanlist,
sizeof(unsigned int) * cmd->scan_end_arg);
- setup_range_channel(dev, s, devpriv->ai_chanlist[0], 1); /* select first channel and range */
+ /* select first channel and range */
+ setup_range_channel(dev, s, devpriv->ai_chanlist[0], 1);
if (devpriv->dma) { /* check if we can use DMA transfer */
devpriv->ai_dma = 1;
for (i = 1; i < devpriv->ai_n_chan; i++)
if (devpriv->ai_chanlist[0] != devpriv->ai_chanlist[i]) {
- devpriv->ai_dma = 0; /* we cann't use DMA :-( */
+ /* we cann't use DMA :-( */
+ devpriv->ai_dma = 0;
break;
}
} else
devpriv->ai_poll_ptr = 0;
s->async->cur_chan = 0;
- if ((devpriv->ai_flags & TRIG_WAKE_EOS)) { /* don't we want wake up every scan? */
+ /* don't we want wake up every scan? */
+ if ((devpriv->ai_flags & TRIG_WAKE_EOS)) {
devpriv->ai_eos = 1;
+
+ /* DMA is useless for this situation */
if (devpriv->ai_n_chan == 1)
- devpriv->ai_dma = 0; /* DMA is useless for this situation */
+ devpriv->ai_dma = 0;
}
if (devpriv->ai_dma) {
- if (devpriv->ai_eos) { /* we use EOS, so adapt DMA buffer to one scan */
+ /* we use EOS, so adapt DMA buffer to one scan */
+ if (devpriv->ai_eos) {
devpriv->dmabytestomove[0] =
devpriv->ai_n_chan * sizeof(short);
devpriv->dmabytestomove[1] =
if (devpriv->ai_neverending) {
devpriv->dma_runs_to_end = 1;
} else {
- bytes = devpriv->ai_n_chan * devpriv->ai_scans * sizeof(short); /* how many samples we must transfer? */
- devpriv->dma_runs_to_end = bytes / devpriv->dmabytestomove[0]; /* how many DMA pages we must fill */
- devpriv->last_dma_run = bytes % devpriv->dmabytestomove[0]; /* on last dma transfer must be moved */
+ /* how many samples we must transfer? */
+ bytes = devpriv->ai_n_chan *
+ devpriv->ai_scans * sizeof(short);
+
+ /* how many DMA pages we must fill */
+ devpriv->dma_runs_to_end =
+ bytes / devpriv->dmabytestomove[0];
+
+ /* on last dma transfer must be moved */
+ devpriv->last_dma_run =
+ bytes % devpriv->dmabytestomove[0];
if (devpriv->dma_runs_to_end == 0)
devpriv->dmabytestomove[0] =
devpriv->last_dma_run;
break;
}
- if (devpriv->ai_dma) {
- outb(devpriv->mode_reg_int | 2, dev->iobase + PCL812_MODE); /* let's go! */
- } else {
- outb(devpriv->mode_reg_int | 6, dev->iobase + PCL812_MODE); /* let's go! */
- }
+ if (devpriv->ai_dma) /* let's go! */
+ outb(devpriv->mode_reg_int | 2, dev->iobase + PCL812_MODE);
+ else /* let's go! */
+ outb(devpriv->mode_reg_int | 6, dev->iobase + PCL812_MODE);
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
+ printk(KERN_DEBUG "pcl812 EDBG: END: pcl812_ai_cmd(...)\n");
#endif
return 0;
if (err) {
printk
- ("comedi%d: pcl812: (%s at 0x%lx) A/D cmd IRQ without DRDY!\n",
+ ("comedi%d: pcl812: (%s at 0x%lx) "
+ "A/D cmd IRQ without DRDY!\n",
dev->minor, dev->board_name, dev->iobase);
pcl812_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
if (next_chan == 0) { /* one scan done */
devpriv->ai_act_scan++;
if (!(devpriv->ai_neverending))
- if (devpriv->ai_act_scan >= devpriv->ai_scans) { /* all data sampled */
+ /* all data sampled */
+ if (devpriv->ai_act_scan >= devpriv->ai_scans) {
pcl812_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
}
s->async->events = 0;
for (i = len; i; i--) {
- comedi_buf_put(s->async, ptr[bufptr++]); /* get one sample */
+ /* get one sample */
+ comedi_buf_put(s->async, ptr[bufptr++]);
s->async->cur_chan++;
if (s->async->cur_chan >= devpriv->ai_n_chan) {
s->async->cur_chan = 0;
devpriv->ai_act_scan++;
if (!devpriv->ai_neverending)
- if (devpriv->ai_act_scan >= devpriv->ai_scans) { /* all data sampled */
+ /* all data sampled */
+ if (devpriv->ai_act_scan >= devpriv->ai_scans) {
pcl812_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
break;
short *ptr;
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
+ printk(KERN_DEBUG "pcl812 EDBG: BGN: interrupt_pcl812_ai_dma(...)\n");
#endif
ptr = (short *)devpriv->dmabuf[devpriv->next_dma_buf];
len = (devpriv->dmabytestomove[devpriv->next_dma_buf] >> 1) -
transfer_from_dma_buf(dev, s, ptr, bufptr, len);
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
+ printk(KERN_DEBUG "pcl812 EDBG: END: interrupt_pcl812_ai_dma(...)\n");
#endif
return IRQ_HANDLED;
}
comedi_error(dev, "spurious interrupt");
return IRQ_HANDLED;
}
- if (devpriv->ai_dma) {
+ if (devpriv->ai_dma)
return interrupt_pcl812_ai_dma(irq, d);
- } else {
+ else
return interrupt_pcl812_ai_int(irq, d);
- };
}
/*
spin_lock_irqsave(&dev->spinlock, flags);
for (i = 0; i < 10; i++) {
- top1 = get_dma_residue(devpriv->ai_dma); /* where is now DMA */
+ /* where is now DMA */
+ top1 = get_dma_residue(devpriv->ai_dma);
top2 = get_dma_residue(devpriv->ai_dma);
if (top1 == top2)
break;
spin_unlock_irqrestore(&dev->spinlock, flags);
return 0;
}
-
- top1 = devpriv->dmabytestomove[1 - devpriv->next_dma_buf] - top1; /* where is now DMA in buffer */
+ /* where is now DMA in buffer */
+ top1 = devpriv->dmabytestomove[1 - devpriv->next_dma_buf] - top1;
top1 >>= 1; /* sample position */
top2 = top1 - devpriv->ai_poll_ptr;
if (top2 < 1) { /* no new samples */
unsigned int rangechan, char wait)
{
unsigned char chan_reg = CR_CHAN(rangechan); /* normal board */
- unsigned char gain_reg = CR_RANGE(rangechan) + devpriv->range_correction; /* gain index */
+ /* gain index */
+ unsigned char gain_reg = CR_RANGE(rangechan) +
+ devpriv->range_correction;
if ((chan_reg == devpriv->old_chan_reg)
&& (gain_reg == devpriv->old_gain_reg))
if (devpriv->use_diff) {
chan_reg = chan_reg | 0x30; /* DIFF inputs */
} else {
- if (chan_reg & 0x80) {
- chan_reg = chan_reg | 0x20; /* SE inputs 8-15 */
- } else {
- chan_reg = chan_reg | 0x10; /* SE inputs 0-7 */
- }
+ if (chan_reg & 0x80)
+ /* SE inputs 8-15 */
+ chan_reg = chan_reg | 0x20;
+ else
+ /* SE inputs 0-7 */
+ chan_reg = chan_reg | 0x10;
}
}
outb(chan_reg, dev->iobase + PCL812_MUX); /* select channel */
outb(gain_reg, dev->iobase + PCL812_GAIN); /* select gain */
- if (wait) {
- udelay(devpriv->max_812_ai_mode0_rangewait); /* XXX this depends on selected range and can be very long for some high gain ranges! */
- }
+
+ if (wait)
+ /*
+ * XXX this depends on selected range and can be very long for
+ * some high gain ranges!
+ */
+ udelay(devpriv->max_812_ai_mode0_rangewait);
}
/*
unsigned int divisor1, unsigned int divisor2)
{
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode, divisor1,
- divisor2);
+ printk(KERN_DEBUG "pcl812 EDBG: BGN: start_pacer(%d,%u,%u)\n", mode,
+ divisor1, divisor2);
#endif
outb(0xb4, dev->iobase + PCL812_CTRCTL);
outb(0x74, dev->iobase + PCL812_CTRCTL);
outb((divisor1 >> 8) & 0xff, dev->iobase + PCL812_CTR1);
}
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: END: start_pacer(...)\n");
+ printk(KERN_DEBUG "pcl812 EDBG: END: start_pacer(...)\n");
#endif
}
struct comedi_subdevice *s)
{
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
+ printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_ai_cancel(...)\n");
#endif
if (devpriv->ai_dma)
disable_dma(devpriv->dma);
outb(0, dev->iobase + PCL812_CLRINT); /* clear INT request */
- outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE); /* Stop A/D */
+ /* Stop A/D */
+ outb(devpriv->mode_reg_int | 0, dev->iobase + PCL812_MODE);
start_pacer(dev, -1, 0, 0); /* stop 8254 */
outb(0, dev->iobase + PCL812_CLRINT); /* clear INT request */
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
+ printk(KERN_DEBUG "pcl812 EDBG: END: pcl812_ai_cancel(...)\n");
#endif
return 0;
}
static void pcl812_reset(struct comedi_device *dev)
{
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: BGN: pcl812_reset(...)\n");
+ printk(KERN_DEBUG "pcl812 EDBG: BGN: pcl812_reset(...)\n");
#endif
outb(0, dev->iobase + PCL812_MUX);
outb(0 + devpriv->range_correction, dev->iobase + PCL812_GAIN);
}
udelay(5);
#ifdef PCL812_EXTDEBUG
- printk("pcl812 EDBG: END: pcl812_reset(...)\n");
+ printk(KERN_DEBUG "pcl812 EDBG: END: pcl812_reset(...)\n");
#endif
}
int n_subdevices;
iobase = it->options[0];
- printk("comedi%d: pcl812: board=%s, ioport=0x%03lx", dev->minor,
- this_board->name, iobase);
+ printk(KERN_INFO "comedi%d: pcl812: board=%s, ioport=0x%03lx",
+ dev->minor, this_board->name, iobase);
if (!request_region(iobase, this_board->io_range, "pcl812")) {
printk("I/O port conflict\n");
if (irq) { /* we want to use IRQ */
if (((1 << irq) & this_board->IRQbits) == 0) {
printk
- (", IRQ %u is out of allowed range, DISABLING IT",
- irq);
+ (", IRQ %u is out of allowed range, "
+ "DISABLING IT", irq);
irq = 0; /* Bad IRQ */
} else {
if (request_irq
(irq, interrupt_pcl812, 0, "pcl812", dev)) {
printk
- (", unable to allocate IRQ %u, DISABLING IT",
- irq);
+ (", unable to allocate IRQ %u, "
+ "DISABLING IT", irq);
irq = 0; /* Can't use IRQ */
} else {
- printk(", irq=%u", irq);
+ printk(KERN_INFO ", irq=%u", irq);
}
}
}
}
ret = request_dma(dma, "pcl812");
if (ret) {
- printk(", unable to allocate DMA %u, FAIL!\n", dma);
+ printk(KERN_ERR ", unable to allocate DMA %u, FAIL!\n",
+ dma);
return -EBUSY; /* DMA isn't free */
}
devpriv->dma = dma;
- printk(", dma=%u", dma);
+ printk(KERN_INFO ", dma=%u", dma);
pages = 1; /* we want 8KB */
devpriv->dmabuf[0] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[0]) {
printk(", unable to allocate DMA buffer, FAIL!\n");
- /* maybe experiment with try_to_free_pages() will help .... */
+ /*
+ * maybe experiment with try_to_free_pages()
+ * will help ....
+ */
free_resources(dev);
return -EBUSY; /* no buffer :-( */
}
devpriv->hwdmasize[0] = PAGE_SIZE * (1 << pages);
devpriv->dmabuf[1] = __get_dma_pages(GFP_KERNEL, pages);
if (!devpriv->dmabuf[1]) {
- printk(", unable to allocate DMA buffer, FAIL!\n");
+ printk(KERN_ERR ", unable to allocate DMA buffer, FAIL!\n");
free_resources(dev);
return -EBUSY;
}
s->maxdata = this_board->ai_maxdata;
s->len_chanlist = MAX_CHANLIST_LEN;
s->range_table = this_board->rangelist_ai;
- if (this_board->board_type == boardACL8216) {
+ if (this_board->board_type == boardACL8216)
s->insn_read = acl8216_ai_insn_read;
- } else {
+ else
s->insn_read = pcl812_ai_insn_read;
- }
+
devpriv->use_MPC = this_board->haveMPC508;
s->cancel = pcl812_ai_cancel;
if (dev->irq) {
s->range_table = &range_bipolar10;
break;
printk
- (", incorrect range number %d, changing to 0 (+/-10V)",
- it->options[4]);
+ (", incorrect range number %d, changing "
+ "to 0 (+/-10V)", it->options[4]);
break;
}
break;
s->range_table = &range_iso813_1_ai;
break;
printk
- (", incorrect range number %d, changing to 0 ",
- it->options[1]);
+ (", incorrect range number %d, "
+ "changing to 0 ", it->options[1]);
break;
}
break;
s->range_table = &range_acl8113_1_ai;
break;
printk
- (", incorrect range number %d, changing to 0 ",
- it->options[1]);
+ (", incorrect range number %d, "
+ "changing to 0 ", it->options[1]);
break;
}
break;
case boardACL8112:
devpriv->max_812_ai_mode0_rangewait = 1;
if (it->options[3] > 0)
- devpriv->use_ext_trg = 1; /* we use external trigger */
+ /* we use external trigger */
+ devpriv->use_ext_trg = 1;
case boardA821:
devpriv->max_812_ai_mode0_rangewait = 1;
devpriv->mode_reg_int = (irq << 4) & 0xf0;
case boardPCL813:
case boardISO813:
case boardACL8113:
- devpriv->max_812_ai_mode0_rangewait = 5; /* maybe there must by greatest timeout */
+ /* maybe there must by greatest timeout */
+ devpriv->max_812_ai_mode0_rangewait = 5;
break;
}
- printk("\n");
+ printk(KERN_INFO "\n");
devpriv->valid = 1;
pcl812_reset(dev);
{
#ifdef PCL812_EXTDEBUG
- printk("comedi%d: pcl812: remove\n", dev->minor);
+ printk(KERN_DEBUG "comedi%d: pcl812: remove\n", dev->minor);
#endif
free_resources(dev);
return 0;
projects / platform / kernel / linux-rpi.git / commitdiff