drivers/net/ftgmac100: adjust code place for function call dependency
authorHeyi Guo <guoheyi@linux.alibaba.com>
Wed, 23 Feb 2022 03:14:35 +0000 (11:14 +0800)
committerDavid S. Miller <davem@davemloft.net>
Wed, 23 Feb 2022 12:50:19 +0000 (12:50 +0000)
This is to prepare for ftgmac100_adjust_link() to call
ftgmac100_reset() directly. Only code places are changed.

Signed-off-by: Heyi Guo <guoheyi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/faraday/ftgmac100.c

index 1f3eb44314753f2d0be9fdd8246649dc6550559d..c1deb6e5d26c5c3e535148ef234c2d6eb3606e32 100644 (file)
@@ -989,117 +989,6 @@ static int ftgmac100_alloc_rx_buffers(struct ftgmac100 *priv)
        return 0;
 }
 
-static void ftgmac100_adjust_link(struct net_device *netdev)
-{
-       struct ftgmac100 *priv = netdev_priv(netdev);
-       struct phy_device *phydev = netdev->phydev;
-       bool tx_pause, rx_pause;
-       int new_speed;
-
-       /* We store "no link" as speed 0 */
-       if (!phydev->link)
-               new_speed = 0;
-       else
-               new_speed = phydev->speed;
-
-       /* Grab pause settings from PHY if configured to do so */
-       if (priv->aneg_pause) {
-               rx_pause = tx_pause = phydev->pause;
-               if (phydev->asym_pause)
-                       tx_pause = !rx_pause;
-       } else {
-               rx_pause = priv->rx_pause;
-               tx_pause = priv->tx_pause;
-       }
-
-       /* Link hasn't changed, do nothing */
-       if (phydev->speed == priv->cur_speed &&
-           phydev->duplex == priv->cur_duplex &&
-           rx_pause == priv->rx_pause &&
-           tx_pause == priv->tx_pause)
-               return;
-
-       /* Print status if we have a link or we had one and just lost it,
-        * don't print otherwise.
-        */
-       if (new_speed || priv->cur_speed)
-               phy_print_status(phydev);
-
-       priv->cur_speed = new_speed;
-       priv->cur_duplex = phydev->duplex;
-       priv->rx_pause = rx_pause;
-       priv->tx_pause = tx_pause;
-
-       /* Link is down, do nothing else */
-       if (!new_speed)
-               return;
-
-       /* Disable all interrupts */
-       iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
-
-       /* Reset the adapter asynchronously */
-       schedule_work(&priv->reset_task);
-}
-
-static int ftgmac100_mii_probe(struct net_device *netdev)
-{
-       struct ftgmac100 *priv = netdev_priv(netdev);
-       struct platform_device *pdev = to_platform_device(priv->dev);
-       struct device_node *np = pdev->dev.of_node;
-       struct phy_device *phydev;
-       phy_interface_t phy_intf;
-       int err;
-
-       /* Default to RGMII. It's a gigabit part after all */
-       err = of_get_phy_mode(np, &phy_intf);
-       if (err)
-               phy_intf = PHY_INTERFACE_MODE_RGMII;
-
-       /* Aspeed only supports these. I don't know about other IP
-        * block vendors so I'm going to just let them through for
-        * now. Note that this is only a warning if for some obscure
-        * reason the DT really means to lie about it or it's a newer
-        * part we don't know about.
-        *
-        * On the Aspeed SoC there are additionally straps and SCU
-        * control bits that could tell us what the interface is
-        * (or allow us to configure it while the IP block is held
-        * in reset). For now I chose to keep this driver away from
-        * those SoC specific bits and assume the device-tree is
-        * right and the SCU has been configured properly by pinmux
-        * or the firmware.
-        */
-       if (priv->is_aspeed && !(phy_interface_mode_is_rgmii(phy_intf))) {
-               netdev_warn(netdev,
-                           "Unsupported PHY mode %s !\n",
-                           phy_modes(phy_intf));
-       }
-
-       phydev = phy_find_first(priv->mii_bus);
-       if (!phydev) {
-               netdev_info(netdev, "%s: no PHY found\n", netdev->name);
-               return -ENODEV;
-       }
-
-       phydev = phy_connect(netdev, phydev_name(phydev),
-                            &ftgmac100_adjust_link, phy_intf);
-
-       if (IS_ERR(phydev)) {
-               netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name);
-               return PTR_ERR(phydev);
-       }
-
-       /* Indicate that we support PAUSE frames (see comment in
-        * Documentation/networking/phy.rst)
-        */
-       phy_support_asym_pause(phydev);
-
-       /* Display what we found */
-       phy_attached_info(phydev);
-
-       return 0;
-}
-
 static int ftgmac100_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
 {
        struct net_device *netdev = bus->priv;
@@ -1465,6 +1354,117 @@ static void ftgmac100_reset_task(struct work_struct *work)
        ftgmac100_reset(priv);
 }
 
+static void ftgmac100_adjust_link(struct net_device *netdev)
+{
+       struct ftgmac100 *priv = netdev_priv(netdev);
+       struct phy_device *phydev = netdev->phydev;
+       bool tx_pause, rx_pause;
+       int new_speed;
+
+       /* We store "no link" as speed 0 */
+       if (!phydev->link)
+               new_speed = 0;
+       else
+               new_speed = phydev->speed;
+
+       /* Grab pause settings from PHY if configured to do so */
+       if (priv->aneg_pause) {
+               rx_pause = tx_pause = phydev->pause;
+               if (phydev->asym_pause)
+                       tx_pause = !rx_pause;
+       } else {
+               rx_pause = priv->rx_pause;
+               tx_pause = priv->tx_pause;
+       }
+
+       /* Link hasn't changed, do nothing */
+       if (phydev->speed == priv->cur_speed &&
+           phydev->duplex == priv->cur_duplex &&
+           rx_pause == priv->rx_pause &&
+           tx_pause == priv->tx_pause)
+               return;
+
+       /* Print status if we have a link or we had one and just lost it,
+        * don't print otherwise.
+        */
+       if (new_speed || priv->cur_speed)
+               phy_print_status(phydev);
+
+       priv->cur_speed = new_speed;
+       priv->cur_duplex = phydev->duplex;
+       priv->rx_pause = rx_pause;
+       priv->tx_pause = tx_pause;
+
+       /* Link is down, do nothing else */
+       if (!new_speed)
+               return;
+
+       /* Disable all interrupts */
+       iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
+
+       /* Reset the adapter asynchronously */
+       schedule_work(&priv->reset_task);
+}
+
+static int ftgmac100_mii_probe(struct net_device *netdev)
+{
+       struct ftgmac100 *priv = netdev_priv(netdev);
+       struct platform_device *pdev = to_platform_device(priv->dev);
+       struct device_node *np = pdev->dev.of_node;
+       struct phy_device *phydev;
+       phy_interface_t phy_intf;
+       int err;
+
+       /* Default to RGMII. It's a gigabit part after all */
+       err = of_get_phy_mode(np, &phy_intf);
+       if (err)
+               phy_intf = PHY_INTERFACE_MODE_RGMII;
+
+       /* Aspeed only supports these. I don't know about other IP
+        * block vendors so I'm going to just let them through for
+        * now. Note that this is only a warning if for some obscure
+        * reason the DT really means to lie about it or it's a newer
+        * part we don't know about.
+        *
+        * On the Aspeed SoC there are additionally straps and SCU
+        * control bits that could tell us what the interface is
+        * (or allow us to configure it while the IP block is held
+        * in reset). For now I chose to keep this driver away from
+        * those SoC specific bits and assume the device-tree is
+        * right and the SCU has been configured properly by pinmux
+        * or the firmware.
+        */
+       if (priv->is_aspeed && !(phy_interface_mode_is_rgmii(phy_intf))) {
+               netdev_warn(netdev,
+                           "Unsupported PHY mode %s !\n",
+                           phy_modes(phy_intf));
+       }
+
+       phydev = phy_find_first(priv->mii_bus);
+       if (!phydev) {
+               netdev_info(netdev, "%s: no PHY found\n", netdev->name);
+               return -ENODEV;
+       }
+
+       phydev = phy_connect(netdev, phydev_name(phydev),
+                            &ftgmac100_adjust_link, phy_intf);
+
+       if (IS_ERR(phydev)) {
+               netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name);
+               return PTR_ERR(phydev);
+       }
+
+       /* Indicate that we support PAUSE frames (see comment in
+        * Documentation/networking/phy.rst)
+        */
+       phy_support_asym_pause(phydev);
+
+       /* Display what we found */
+       phy_attached_info(phydev);
+
+       return 0;
+}
+
 static int ftgmac100_open(struct net_device *netdev)
 {
        struct ftgmac100 *priv = netdev_priv(netdev);