drm/i915: fix calculation of eDP signal levels on Sandybridge

Some voltage swing/pre-emphasis level use the same value on eDP
Sandybridge, like 400mv_0db and 600mv_0db are with the same value
of (0x0 << 22). So, fix them, and point out the value if it isn't
a supported voltage swing/pre-emphasis level.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 8f948a6..677eca6 100644 (file)
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3174,10 +3174,11 @@
 #define  EDP_LINK_TRAIN_600MV_3_5DB_SNB_A      (0x01<<22)
 #define  EDP_LINK_TRAIN_800MV_0DB_SNB_A                (0x0<<22)
 /* SNB B-stepping */
-#define  EDP_LINK_TRAIN_400MV_0DB_SNB_B                (0x0<<22)
-#define  EDP_LINK_TRAIN_400MV_6DB_SNB_B                (0x3a<<22)
-#define  EDP_LINK_TRAIN_600MV_3_5DB_SNB_B      (0x39<<22)
-#define  EDP_LINK_TRAIN_800MV_0DB_SNB_B                (0x38<<22)
+#define  EDP_LINK_TRAIN_400_600MV_0DB_SNB_B    (0x0<<22)
+#define  EDP_LINK_TRAIN_400MV_3_5DB_SNB_B      (0x1<<22)
+#define  EDP_LINK_TRAIN_400_600MV_6DB_SNB_B    (0x3a<<22)
+#define  EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B  (0x39<<22)
+#define  EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B   (0x38<<22)
 #define  EDP_LINK_TRAIN_VOL_EMP_MASK_SNB       (0x3f<<22)
 
 #define  FORCEWAKE                             0xA18C

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index c768e30..1f4242b 100644 (file)
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1153,18 +1153,27 @@ intel_dp_signal_levels(uint8_t train_set, int lane_count)
 static uint32_t
 intel_gen6_edp_signal_levels(uint8_t train_set)
 {
-       switch (train_set & (DP_TRAIN_VOLTAGE_SWING_MASK|DP_TRAIN_PRE_EMPHASIS_MASK)) {
+       int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+                                        DP_TRAIN_PRE_EMPHASIS_MASK);
+       switch (signal_levels) {
        case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
-               return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
+       case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
+               return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
+       case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
+               return EDP_LINK_TRAIN_400MV_3_5DB_SNB_B;
        case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
-               return EDP_LINK_TRAIN_400MV_6DB_SNB_B;
+       case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
+               return EDP_LINK_TRAIN_400_600MV_6DB_SNB_B;
        case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
-               return EDP_LINK_TRAIN_600MV_3_5DB_SNB_B;
+       case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
+               return EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B;
        case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
-               return EDP_LINK_TRAIN_800MV_0DB_SNB_B;
+       case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0:
+               return EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B;
        default:
-               DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level\n");
-               return EDP_LINK_TRAIN_400MV_0DB_SNB_B;
+               DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
+                             "0x%x\n", signal_levels);
+               return EDP_LINK_TRAIN_400_600MV_0DB_SNB_B;
        }
 }