include/configs: Use new CONFIG_CMD_* in various D* named board config files.
authorJon Loeliger <jdl@freescale.com>
Sun, 8 Jul 2007 01:40:43 +0000 (20:40 -0500)
committerJon Loeliger <jdl@freescale.com>
Sun, 8 Jul 2007 01:40:43 +0000 (20:40 -0500)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
include/configs/DASA_SIM.h
include/configs/DB64360.h
include/configs/DB64460.h
include/configs/DK1C20.h
include/configs/DK1S10.h
include/configs/DP405.h
include/configs/DU405.h

index 997e1ba..b1638ce 100644 (file)
 #define CONFIG_IPADDR          10.0.18.222
 #define CONFIG_SERVERIP                10.0.18.190
 
-#if 0
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_BSP     | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_ELF     )
-#else
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_BSP     )
-#endif
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+
 
 #if 0 /* Does not appear to be used?!  If it is used, needs to be fixed */
 #define CONFIG_SOFT_I2C                        /* Software I2C support enabled */
 #endif
 #define CFG_I2C_EEPROM_ADDR_LEN 1      /* Bytes of address             */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Miscellaneous configurable options
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
  */
 #define CFG_DCACHE_SIZE                2048    /* For PLX IOP480                       */
 #define CFG_CACHELINE_SIZE     16      /* For AMCC 401/403 CPUs                */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    4       /* log base 2 of the above value        */
 #endif
 
index bd7aff1..f7e1c4d 100644 (file)
@@ -239,17 +239,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define MTDPARTS_DEFAULT       "mtdparts=db64360-1:-(jffs2)"
 */
 
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
-                        | CFG_CMD_ASKENV \
-                        | CFG_CMD_I2C \
-                        | CFG_CMD_EEPROM \
-                        | CFG_CMD_CACHE \
-                        | CFG_CMD_JFFS2 \
-                        | CFG_CMD_PCI \
-                        | CFG_CMD_NET )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+
 
 /*
  * Miscellaneous configurable options
@@ -261,7 +264,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /* #define CFG_GT_DUAL_CPU      also for JTAG even with one cpu */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -558,7 +561,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     32      /* For all MPC74xx CPUs          */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 #endif
 
index 4b72e9b..8cba0b2 100644 (file)
@@ -177,17 +177,20 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 #define MTDPARTS_DEFAULT       "mtdparts=db64460-1:-(jffs2)"
 */
 
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
-                        | CFG_CMD_ASKENV \
-                        | CFG_CMD_I2C \
-                        | CFG_CMD_EEPROM \
-                        | CFG_CMD_CACHE \
-                        | CFG_CMD_JFFS2 \
-                        | CFG_CMD_PCI \
-                        | CFG_CMD_NET )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+
 
 /*
  * Miscellaneous configurable options
@@ -199,7 +202,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
 /* #define CFG_GT_DUAL_CPU      also for JTAG even with one cpu */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -496,7 +499,7 @@ ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     32      /* For all MPC74xx CPUs          */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 #endif
 
index b58846d..c3bd2cb 100644 (file)
 #define CONFIG_NIOS_ASMI                          /* Enable ASMI       */
 #define CFG_NIOS_ASMIBASE      CFG_NIOS_CPU_ASMI0 /* ASMI base address */
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS                (CFG_CMD_ALL & ~( \
-                                CFG_CMD_ASKENV | \
-                                CFG_CMD_BEDBUG | \
-                                CFG_CMD_BMP    | \
-                                CFG_CMD_BSP    | \
-                                CFG_CMD_CACHE  | \
-                                CFG_CMD_DATE   | \
-                                CFG_CMD_DOC    | \
-                                CFG_CMD_DTT    | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_ELF    | \
-                                CFG_CMD_FDC    | \
-                                CFG_CMD_FDOS   | \
-                                CFG_CMD_HWFLOW | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_JFFS2  | \
-                                CFG_CMD_KGDB   | \
-                                CFG_CMD_NAND   | \
-                                CFG_CMD_NFS    | \
-                                CFG_CMD_MMC    | \
-                                CFG_CMD_MII    | \
-                                CFG_CMD_PCI    | \
-                                CFG_CMD_PCMCIA | \
-                                CFG_CMD_REISER | \
-                                CFG_CMD_SCSI   | \
-                                CFG_CMD_SPI    | \
-                                CFG_CMD_VFD    | \
-                                CFG_CMD_USB    | \
-                                CFG_CMD_XIMG   ) )
-
-
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DATE
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_XIMG
+
 
 /*------------------------------------------------------------------------
  * COMPACT FLASH
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
 #define CONFIG_IDE_PREINIT                     /* Implement id_preinit */
 #define CFG_IDE_MAXBUS         1               /* 1 IDE bus            */
 #define CFG_IDE_MAXDEVICE      1               /* 1 drive per IDE bus  */
 #define CFG_CF_POWER           0x009209c0      /* CF Power FET PIO base*/
 #define CFG_CF_ATASEL          0x009209d0      /* CF ATASEL PIO base   */
 
-#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */
+#endif
 
 /*------------------------------------------------------------------------
  * KGDB
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   9600
 #endif
 
index 3e3803c..a5530a6 100644 (file)
 
 #endif /* CFG_NIOS_CPU_PIO_NUMS */
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS                (CFG_CMD_ALL & ~( \
-                                CFG_CMD_ASKENV | \
-                                CFG_CMD_BEDBUG | \
-                                CFG_CMD_BMP    | \
-                                CFG_CMD_BSP    | \
-                                CFG_CMD_CACHE  | \
-                                CFG_CMD_DATE   | \
-                                CFG_CMD_DOC    | \
-                                CFG_CMD_DTT    | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_ELF    | \
-                                CFG_CMD_FAT    | \
-                                CFG_CMD_FDC    | \
-                                CFG_CMD_FDOS   | \
-                                CFG_CMD_HWFLOW | \
-                                CFG_CMD_IDE    | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_JFFS2  | \
-                                CFG_CMD_KGDB   | \
-                                CFG_CMD_NAND   | \
-                                CFG_CMD_NFS    | \
-                                CFG_CMD_MMC    | \
-                                CFG_CMD_MII    | \
-                                CFG_CMD_PCI    | \
-                                CFG_CMD_PCMCIA | \
-                                CFG_CMD_SCSI   | \
-                                CFG_CMD_SPI    | \
-                                CFG_CMD_VFD    | \
-                                CFG_CMD_USB    | \
-                                CFG_CMD_XIMG   ) )
-
-
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_ASKENV
+#undef COND_CMD_BEDBUG
+#undef COND_CMD_BMP
+#undef COND_CMD_BSP
+#undef COND_CMD_CACHE
+#undef COND_CMD_DATE
+#undef COND_CMD_DOC
+#undef COND_CMD_DTT
+#undef COND_CMD_EEPROM
+#undef COND_CMD_ELF
+#undef COND_CMD_FAT
+#undef COND_CMD_FDC
+#undef COND_CMD_FDOS
+#undef COND_CMD_HWFLOW
+#undef COND_CMD_IDE
+#undef COND_CMD_I2C
+#undef COND_CMD_JFFS2
+#undef COND_CMD_KGDB
+#undef COND_CMD_NAND
+#undef COND_CMD_NFS
+#undef COND_CMD_MMC
+#undef COND_CMD_MII
+#undef COND_CMD_PCI
+#undef COND_CMD_PCMCIA
+#undef COND_CMD_SCSI
+#undef COND_CMD_SPI
+#undef COND_CMD_VFD
+#undef COND_CMD_USB
+#undef COND_CMD_XIMG
+
 
 /*------------------------------------------------------------------------
  * KGDB
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   9600
 #endif
 
index 2ae794d..b50d4f9 100644 (file)
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_BSP     | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_EEPROM  )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_EEPROM
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -87,7 +90,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
 #define CFG_DCACHE_SIZE                16384   /* For AMCC 405 CPUs, older 405 ppc's   */
                                        /* have only 8kB, 16kB is save here     */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 
index 5489a53..2093b37 100644 (file)
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 
-#define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_IDE     | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_EEPROM  )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
 #define CONFIG_RTC_MC146818            /* BQ3285 is MC146818 compatible*/
@@ -85,7 +88,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
  */
 #define CFG_DCACHE_SIZE                8192    /* For AMCC 405 CPUs                    */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif