ppc4xx: Correctly configure the GPIO pin muxing on Arches

Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
pin multiplexing correctly

Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index ec08ba7..f8e8801 100644 (file)
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -571,6 +571,16 @@
 #define CONFIG_SYS_EBC_CFG             0xB8400000              /*  EBC0_CFG */
 
 /*
+ * Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO
+ * pin multiplexing correctly
+ */
+#if defined(CONFIG_ARCHES)
+#define GPIO43_USE             GPIO_SEL        /* On Arches this pin is used as GPIO */
+#else
+#define GPIO43_USE             GPIO_ALT1       /* On Glacier this pin is used as ALT1 -> PerCS3 */
+#endif
+
+/*
  * PPC4xx GPIO Configuration
  */
 #ifdef CONFIG_460EX
@@ -698,7 +708,7 @@
 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3)                                */      \
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1)                         */      \
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2)                         */      \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3)         DMAReq1         IRQ(10)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO43_USE, GPIO_OUT_0},/* GPIO43 CS(3)         DMAReq1         IRQ(10)*/ \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4)         DMAAck1         IRQ(11)*/ \
 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5)         EOT/TC1         IRQ(12)*/ \
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5)    DMAReq0         IRQ(13)*/ \