/* intel_i2c.c */
extern int intel_setup_gmbus(struct drm_device *dev);
extern void intel_teardown_gmbus(struct drm_device *dev);
+extern inline bool intel_gmbus_is_port_valid(unsigned port)
+{
+ return (port >= GMBUS_PORT_DISABLED && port <= GMBUS_PORT_RESERVED);
+}
+
+extern struct i2c_adapter *intel_gmbus_get_adapter(
+ struct drm_i915_private *dev_priv, unsigned port);
extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed);
extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit);
extern inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter)
if (block_size >= sizeof(*general)) {
int bus_pin = general->crt_ddc_gmbus_pin;
DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin);
- if (bus_pin >= 1 && bus_pin <= 6)
+ if (intel_gmbus_is_port_valid(bus_pin))
dev_priv->crt_ddc_pin = bus_pin;
} else {
DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n",
- block_size);
+ block_size);
}
}
}
if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
struct edid *edid;
bool is_digital = false;
+ struct i2c_adapter *i2c;
- edid = drm_get_edid(connector,
- &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
+ edid = drm_get_edid(connector, i2c);
/*
* This may be a DVI-I connector with a shared DDC
* link between analog and digital outputs, so we
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
+ struct i2c_adapter *i2c;
- ret = intel_ddc_get_modes(connector,
- &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
+ ret = intel_ddc_get_modes(connector, i2c);
if (ret || !IS_G4X(dev))
return ret;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
- return intel_ddc_get_modes(connector,
- &dev_priv->gmbus[GMBUS_PORT_DPB].adapter);
+ i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
+ return intel_ddc_get_modes(connector, i2c);
}
static int intel_crt_set_property(struct drm_connector *connector,
* that's not the case.
*/
intel_ddc_get_modes(connector,
- &dev_priv->gmbus[GMBUS_PORT_DPC].adapter);
+ intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPC));
if (!list_empty(&connector->probed_modes))
return 1;
* special cases, but otherwise default to what's defined
* in the spec.
*/
- if (dvo->gpio != 0)
+ if (intel_gmbus_is_port_valid(dvo->gpio))
gpio = dvo->gpio;
else if (dvo->type == INTEL_DVO_CHIP_LVDS)
gpio = GMBUS_PORT_SSC;
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
- i2c = &dev_priv->gmbus[gpio].adapter;
+ i2c = intel_gmbus_get_adapter(dev_priv, gpio);
intel_dvo->dev = *dvo;
if (!dvo->dev_ops->init(&intel_dvo->dev, i2c))
intel_hdmi->has_hdmi_sink = false;
intel_hdmi->has_audio = false;
edid = drm_get_edid(connector,
- &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
*/
return intel_ddc_get_modes(connector,
- &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ intel_hdmi->ddc_bus));
}
static bool
bool has_audio = false;
edid = drm_get_edid(connector,
- &dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ intel_hdmi->ddc_bus));
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL)
has_audio = drm_detect_monitor_audio(edid);
return ret;
}
+struct i2c_adapter *intel_gmbus_get_adapter(struct drm_i915_private *dev_priv,
+ unsigned port)
+{
+ WARN_ON(!intel_gmbus_is_port_valid(port));
+ return (intel_gmbus_is_port_valid(port)) ?
+ &dev_priv->gmbus[port].adapter : NULL;
+}
+
void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
{
struct intel_gmbus *bus = to_intel_gmbus(adapter);
child->device_type != DEVICE_TYPE_LFP)
continue;
- if (child->i2c_pin)
- *i2c_pin = child->i2c_pin;
+ if (intel_gmbus_is_port_valid(child->i2c_pin))
+ *i2c_pin = child->i2c_pin;
/* However, we cannot trust the BIOS writers to populate
* the VBT correctly. Since LVDS requires additional
* preferred mode is the right one.
*/
intel_lvds->edid = drm_get_edid(connector,
- &dev_priv->gmbus[pin].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ pin));
if (intel_lvds->edid) {
if (drm_add_edid_modes(connector,
intel_lvds->edid)) {
}
};
- return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 2) == 2;
+ return i2c_transfer(intel_gmbus_get_adapter(dev_priv, ddc_bus),
+ msgs, 2) == 2;
}
/**
struct drm_i915_private *dev_priv = connector->dev->dev_private;
return drm_get_edid(connector,
- &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ intel_gmbus_get_adapter(dev_priv,
+ dev_priv->crt_ddc_pin));
}
enum drm_connector_status
if (mapping->initialized)
pin = mapping->i2c_pin;
- if (pin < GMBUS_NUM_PORTS) {
- sdvo->i2c = &dev_priv->gmbus[pin].adapter;
+ if (intel_gmbus_is_port_valid(pin)) {
+ sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin);
intel_gmbus_set_speed(sdvo->i2c, GMBUS_RATE_1MHZ);
intel_gmbus_force_bit(sdvo->i2c, true);
} else {
- sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
+ sdvo->i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
}
}