V4L/DVB (6900): cx23885: enable EZ-QAM mode for Hauppauge WinTV HVR-1800

Add module option 'alt_tuner' disabled by default.

When set to one, the dvb_frontend of HVR1800 will consist of:
s5h1409 demod + tda18271 tuner

When set zero (default), the dvb_frontend of HVR1800 will consist of:
s5h1409 demod + mt2131 tuner

If the tda18271 is used in digital mode, you will not be able to
tune an analog channel at the same time.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index e11fa10..fbf93c6 100644 (file)
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -246,7 +246,8 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
                /* GPIO-11-14 cx23417 addr0-3 */
                /* GPIO-15-18 cx23417 READY, CS, RD, WR */
                /* GPIO-19 IR_RX */
-               // FIXME: Analog requires the tuner is brought out of reset
+
+               cx_set(GP0_IO, 0x00040004); /* Bring the tuner out of reset */
                break;
        }
 }

diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index c130911..0f7e9df 100644 (file)
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -32,6 +32,7 @@
 
 #include "s5h1409.h"
 #include "mt2131.h"
+#include "tda8290.h"
 #include "lgdt330x.h"
 #include "xc5000.h"
 #include "dvb-pll.h"
@@ -45,6 +46,12 @@ static unsigned int debug = 0;
 
 /* ------------------------------------------------------------------ */
 
+static unsigned int alt_tuner;
+module_param(alt_tuner, int, 0644);
+MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
+
+/* ------------------------------------------------------------------ */
+
 static int dvb_buf_setup(struct videobuf_queue *q,
                         unsigned int *count, unsigned int *size)
 {
@@ -119,6 +126,15 @@ static struct s5h1409_config hauppauge_generic_config = {
        .status_mode   = S5H1409_DEMODLOCKING
 };
 
+static struct s5h1409_config hauppauge_ezqam_config = {
+       .demod_address = 0x32 >> 1,
+       .output_mode   = S5H1409_SERIAL_OUTPUT,
+       .gpio          = S5H1409_GPIO_OFF,
+       .qam_if        = 4000,
+       .inversion     = S5H1409_INVERSION_ON,
+       .status_mode   = S5H1409_DEMODLOCKING
+};
+
 static struct s5h1409_config hauppauge_hvr1800lp_config = {
        .demod_address = 0x32 >> 1,
        .output_mode   = S5H1409_SERIAL_OUTPUT,
@@ -203,7 +219,6 @@ static int dvb_register(struct cx23885_tsport *port)
        /* init frontend */
        switch (dev->board) {
        case CX23885_BOARD_HAUPPAUGE_HVR1250:
-       case CX23885_BOARD_HAUPPAUGE_HVR1800:
                i2c_bus = &dev->i2c_bus[0];
                port->dvb.frontend = dvb_attach(s5h1409_attach,
                                                &hauppauge_generic_config,
@@ -214,6 +229,33 @@ static int dvb_register(struct cx23885_tsport *port)
                                   &hauppauge_generic_tunerconfig, 0);
                }
                break;
+       case CX23885_BOARD_HAUPPAUGE_HVR1800:
+               i2c_bus = &dev->i2c_bus[0];
+               switch (alt_tuner) {
+               case 1:
+                       port->dvb.frontend =
+                               dvb_attach(s5h1409_attach,
+                                          &hauppauge_ezqam_config,
+                                          &i2c_bus->i2c_adap);
+                       if (port->dvb.frontend != NULL) {
+                               dvb_attach(tda829x_attach, port->dvb.frontend,
+                                          &dev->i2c_bus[1].i2c_adap, 0x42,
+                                          NULL);
+                       }
+                       break;
+               case 0:
+               default:
+                       port->dvb.frontend =
+                               dvb_attach(s5h1409_attach,
+                                          &hauppauge_generic_config,
+                                          &i2c_bus->i2c_adap);
+                       if (port->dvb.frontend != NULL)
+                               dvb_attach(mt2131_attach, port->dvb.frontend,
+                                          &i2c_bus->i2c_adap,
+                                          &hauppauge_generic_tunerconfig, 0);
+                       break;
+               }
+               break;
        case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
                i2c_bus = &dev->i2c_bus[0];
                port->dvb.frontend = dvb_attach(s5h1409_attach,
@@ -284,6 +326,9 @@ static int dvb_register(struct cx23885_tsport *port)
        /* Put the analog decoder in standby to keep it quiet */
        cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
 
+       if (port->dvb.frontend->ops.analog_ops.standby)
+               port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend);
+
        /* register everything */
        return videobuf_dvb_register(&port->dvb, THIS_MODULE, port,
                                     &dev->pci->dev);