Using coalesced strings helps grep for specific messages.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
dev->dev_addr[0], dev->mem_start, dev->irq);
if (dev->mem_start <= 0 || dev->irq <= 0) {
- BUGLVL(D_NORMAL) printk("No autoprobe for RIM I; you "
- "must specify the shmem and irq!\n");
+ BUGLVL(D_NORMAL) printk("No autoprobe for RIM I; you must specify the shmem and irq!\n");
return -ENODEV;
}
if (dev->dev_addr[0] == 0) {
- BUGLVL(D_NORMAL) printk("You need to specify your card's station "
- "ID!\n");
+ BUGLVL(D_NORMAL) printk("You need to specify your card's station ID!\n");
return -ENODEV;
}
/*
/* get and check the station ID from offset 1 in shmem */
dev->dev_addr[0] = readb(lp->mem_start + 1);
- BUGMSG(D_NORMAL, "ARCnet RIM I: station %02Xh found at IRQ %d, "
- "ShMem %lXh (%ld*%d bytes).\n",
+ BUGMSG(D_NORMAL, "ARCnet RIM I: station %02Xh found at IRQ %d, ShMem %lXh (%ld*%d bytes)\n",
dev->dev_addr[0],
dev->irq, dev->mem_start,
(dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size);
lp->hw.open(dev);
if (dev->dev_addr[0] == 0)
- BUGMSG(D_NORMAL, "WARNING! Station address 00 is reserved "
- "for broadcasts!\n");
+ BUGMSG(D_NORMAL, "WARNING! Station address 00 is reserved for broadcasts!\n");
else if (dev->dev_addr[0] == 255)
- BUGMSG(D_NORMAL, "WARNING! Station address FF may confuse "
- "DOS networking programs!\n");
+ BUGMSG(D_NORMAL, "WARNING! Station address FF may confuse DOS networking programs!\n");
BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
if (ASTATUS() & RESETflag) {
if (proto->continue_tx &&
proto->continue_tx(dev, txbuf)) {
BUGMSG(D_NORMAL,
- "bug! continue_tx finished the first time! "
- "(proto='%c')\n", proto->suffix);
+ "bug! continue_tx finished the first time! (proto='%c')\n",
+ proto->suffix);
}
}
retval = NETDEV_TX_OK;
if (!(status & TXACKflag)) {
if (lp->lasttrans_dest != 0) {
BUGMSG(D_EXTRA,
- "transmit was not acknowledged! "
- "(status=%Xh, dest=%02Xh)\n",
+ "transmit was not acknowledged! (status=%Xh, dest=%02Xh)\n",
status, lp->lasttrans_dest);
dev->stats.tx_errors++;
dev->stats.tx_carrier_errors++;
} else {
BUGMSG(D_DURING,
- "broadcast was not acknowledged; that's normal "
- "(status=%Xh, dest=%02Xh)\n",
+ "broadcast was not acknowledged; that's normal (status=%Xh, dest=%02Xh)\n",
status, lp->lasttrans_dest);
}
}
lp->hw.copy_from_card(dev, bufnum, ofs, soft, length);
}
- BUGMSG(D_DURING, "Buffer #%d: received packet from %02Xh to %02Xh "
- "(%d+4 bytes)\n",
+ BUGMSG(D_DURING, "Buffer #%d: received packet from %02Xh to %02Xh (%d+4 bytes)\n",
bufnum, pkt.hard.source, pkt.hard.dest, length);
dev->stats.rx_packets++;
if (oldp != newp) {
BUGMSG(D_PROTO,
- "got protocol %02Xh; encap for host %02Xh is now '%c'"
- " (was '%c')\n", soft->proto, pkt.hard.source,
+ "got protocol %02Xh; encap for host %02Xh is now '%c' (was '%c')\n",
+ soft->proto, pkt.hard.source,
newp->suffix, oldp->suffix);
}
}
ioaddr = dev->base_addr;
if (!ioaddr) {
- BUGMSG(D_NORMAL, "No autoprobe (yet) for IO mapped cards; you "
- "must specify the base address!\n");
+ BUGMSG(D_NORMAL, "No autoprobe (yet) for IO mapped cards; you must specify the base address!\n");
return -ENODEV;
}
if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "arcnet (COM20020)")) {
BUGLVL(D_NORMAL) printk("E-mail me if you actually test this driver, please!\n");
if (!ioaddr) {
- BUGMSG(D_NORMAL, "No autoprobe for IO mapped cards; you "
- "must specify the base address!\n");
+ BUGMSG(D_NORMAL, "No autoprobe for IO mapped cards; you must specify the base address!\n");
return -ENODEV;
}
if (!request_region(ioaddr, ARCNET_TOTAL_SIZE, "com90io probe")) {
outb(0, _ADDR_LO);
if ((status = inb(_MEMDATA)) != 0xd1) {
- BUGMSG(D_INIT_REASONS, "Signature byte not found"
- " (%Xh instead).\n", status);
+ BUGMSG(D_INIT_REASONS, "Signature byte not found (%Xh instead).\n",
+ status);
goto err_out;
}
if (!dev->irq) {
dev->base_addr = ioaddr;
- BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, "
- "ShMem %lXh (%ld*%xh).\n",
+ BUGMSG(D_NORMAL, "COM90xx station %02Xh found at %03lXh, IRQ %d, ShMem %lXh (%ld*%xh).\n",
dev->dev_addr[0],
dev->base_addr, dev->irq, dev->mem_start,
(dev->mem_end - dev->mem_start + 1) / mirror_size, mirror_size);
BUGMSG(D_RX, "brand new splitpacket (splitflag=%d)\n",
soft->split_flag);
if (in->skb) { /* already assembling one! */
- BUGMSG(D_EXTRA, "aborting previous (seq=%d) assembly "
- "(splitflag=%d, seq=%d)\n",
+ BUGMSG(D_EXTRA, "aborting previous (seq=%d) assembly (splitflag=%d, seq=%d)\n",
in->sequence, soft->split_flag,
soft->sequence);
dev->stats.rx_errors++;
*/
if (!in->skb) {
if (lp->rfc1201.aborted_seq != soft->sequence) {
- BUGMSG(D_EXTRA, "can't continue split without starting "
- "first! (splitflag=%d, seq=%d, aborted=%d)\n",
+ BUGMSG(D_EXTRA, "can't continue split without starting first! (splitflag=%d, seq=%d, aborted=%d)\n",
soft->split_flag, soft->sequence,
lp->rfc1201.aborted_seq);
dev->stats.rx_errors++;
return;
}
/* "bad" duplicate, kill reassembly */
- BUGMSG(D_EXTRA, "out-of-order splitpacket, reassembly "
- "(seq=%d) aborted (splitflag=%d, seq=%d)\n",
+ BUGMSG(D_EXTRA, "out-of-order splitpacket, reassembly (seq=%d) aborted (splitflag=%d, seq=%d)\n",
in->sequence, soft->split_flag, soft->sequence);
lp->rfc1201.aborted_seq = soft->sequence;
dev_kfree_skb_irq(in->skb);
out->numsegs = (out->dataleft + maxsegsize - 1) / maxsegsize;
out->segnum = 0;
- BUGMSG(D_DURING, "rfc1201 prep_tx: ready for %d-segment split "
- "(%d bytes, seq=%d)\n", out->numsegs, out->length,
+ BUGMSG(D_DURING, "rfc1201 prep_tx: ready for %d-segment split (%d bytes, seq=%d)\n",
+ out->numsegs, out->length,
pkt->soft.rfc1201.sequence);
return 0; /* not done */