hwmon: (pc87360) Fix multi-line comments

Cc: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 3d99b88..b54637e 100644 (file)
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -498,9 +498,11 @@ static struct sensor_device_attribute in_max[] = {
 #define CHAN_ALM_MAX   0x04    /* max limit exceeded */
 #define TEMP_ALM_CRIT  0x08    /* temp crit exceeded (temp only) */
 
-/* show_in_min/max_alarm() reads data from the per-channel status
-   register (sec 11.5.12), not the vin event status registers (sec
-   11.5.2) that (legacy) show_in_alarm() resds (via data->in_alarms) */
+/*
+ * show_in_min/max_alarm() reads data from the per-channel status
+ * register (sec 11.5.12), not the vin event status registers (sec
+ * 11.5.2) that (legacy) show_in_alarm() resds (via data->in_alarms)
+ */
 
 static ssize_t show_in_min_alarm(struct device *dev,
                        struct device_attribute *devattr, char *buf)
@@ -679,9 +681,10 @@ static ssize_t set_therm_crit(struct device *dev, struct device_attribute *devat
        return count;
 }
 
-/* the +11 term below reflects the fact that VLM units 11,12,13 are
-   used in the chip to measure voltage across the thermistors
-*/
+/*
+ * the +11 term below reflects the fact that VLM units 11,12,13 are
+ * used in the chip to measure voltage across the thermistors
+ */
 static struct sensor_device_attribute therm_input[] = {
        SENSOR_ATTR(temp4_input, S_IRUGO, show_therm_input, NULL, 0+11),
        SENSOR_ATTR(temp5_input, S_IRUGO, show_therm_input, NULL, 1+11),
@@ -717,8 +720,10 @@ static struct sensor_device_attribute therm_crit[] = {
                    show_therm_crit, set_therm_crit, 2+11),
 };
 
-/* show_therm_min/max_alarm() reads data from the per-channel voltage
-   status register (sec 11.5.12) */
+/*
+ * show_therm_min/max_alarm() reads data from the per-channel voltage
+ * status register (sec 11.5.12)
+ */
 
 static ssize_t show_therm_min_alarm(struct device *dev,
                                struct device_attribute *devattr, char *buf)
@@ -905,9 +910,11 @@ static ssize_t show_temp_alarms(struct device *dev, struct device_attribute *att
 }
 static DEVICE_ATTR(alarms_temp, S_IRUGO, show_temp_alarms, NULL);
 
-/* show_temp_min/max_alarm() reads data from the per-channel status
-   register (sec 12.3.7), not the temp event status registers (sec
-   12.3.2) that show_temp_alarm() reads (via data->temp_alarms) */
+/*
+ * show_temp_min/max_alarm() reads data from the per-channel status
+ * register (sec 12.3.7), not the temp event status registers (sec
+ * 12.3.2) that show_temp_alarm() reads (via data->temp_alarms)
+ */
 
 static ssize_t show_temp_min_alarm(struct device *dev,
                        struct device_attribute *devattr, char *buf)
@@ -1063,9 +1070,11 @@ static int __init pc87360_find(int sioaddr, u8 *devid, unsigned short *addresses
                } else if (i==1) { /* Voltages */
                        /* Are we using thermistors? */
                        if (*devid == 0xE9) { /* PC87366 */
-                               /* These registers are not logical-device
-                                  specific, just that we won't need them if
-                                  we don't use the VLM device */
+                               /*
+                                * These registers are not logical-device
+                                * specific, just that we won't need them if
+                                * we don't use the VLM device
+                                */
                                confreg[2] = superio_inb(sioaddr, 0x2B);
                                confreg[3] = superio_inb(sioaddr, 0x25);
 
@@ -1147,9 +1156,11 @@ static int __devinit pc87360_probe(struct platform_device *pdev)
        if (data->fannr)
                data->fan_conf = confreg[0] | (confreg[1] << 8);
 
-       /* Use the correct reference voltage
-          Unless both the VLM and the TMS logical devices agree to
-          use an external Vref, the internal one is used. */
+       /*
+        * Use the correct reference voltage
+        * Unless both the VLM and the TMS logical devices agree to
+        * use an external Vref, the internal one is used.
+        */
        if (data->innr) {
                i = pc87360_read_value(data, LD_IN, NO_BANK,
                                       PC87365_REG_IN_CONFIG);
@@ -1287,8 +1298,10 @@ static int __devexit pc87360_remove(struct platform_device *pdev)
        return 0;
 }
 
-/* ldi is the logical device index
-   bank is for voltages and temperatures only */
+/*
+ * ldi is the logical device index
+ * bank is for voltages and temperatures only
+ */
 static int pc87360_read_value(struct pc87360_data *data, u8 ldi, u8 bank,
                              u8 reg)
 {
@@ -1359,8 +1372,10 @@ static void pc87360_init_device(struct platform_device *pdev,
                }
        }
 
-       /* We can't blindly trust the Super-I/O space configuration bit,
-          most BIOS won't set it properly */
+       /*
+        * We can't blindly trust the Super-I/O space configuration bit,
+        * most BIOS won't set it properly
+        */
        dev_dbg(&pdev->dev, "bios thermistors:%d\n", use_thermistors);
        for (i = 11; i < data->innr; i++) {
                reg = pc87360_read_value(data, LD_IN, i,
@@ -1391,8 +1406,10 @@ static void pc87360_init_device(struct platform_device *pdev,
        if (use_thermistors) {
                for (i = 11; i < data->innr; i++) {
                        if (init >= init_in[i]) {
-                               /* The pin may already be used by thermal
-                                  diodes */
+                               /*
+                                * The pin may already be used by thermal
+                                * diodes
+                                */
                                reg = pc87360_read_value(data, LD_TEMP,
                                      (i-11)/2, PC87365_REG_TEMP_STATUS);
                                if (reg & CHAN_ENA) {
@@ -1444,10 +1461,12 @@ static void pc87360_init_device(struct platform_device *pdev,
                if (init >= 2) {
                        /* Chip config as documented by National Semi. */
                        pc87360_write_value(data, LD_TEMP, 0xF, 0xA, 0x08);
-                       /* We voluntarily omit the bank here, in case the
-                          sequence itself matters. It shouldn't be a problem,
-                          since nobody else is supposed to access the
-                          device at that point. */
+                       /*
+                        * We voluntarily omit the bank here, in case the
+                        * sequence itself matters. It shouldn't be a problem,
+                        * since nobody else is supposed to access the
+                        * device at that point.
+                        */
                        pc87360_write_value(data, LD_TEMP, NO_BANK, 0xB, 0x04);
                        pc87360_write_value(data, LD_TEMP, NO_BANK, 0xC, 0x35);
                        pc87360_write_value(data, LD_TEMP, NO_BANK, 0xD, 0x05);