This fixes the following DT schemas check errors:
meson-axg-s400.dt.yaml: soc: ethernet@
ff3f0000:reg:0: [0,
4282318848, 0, 65536, 0,
4284695872, 0, 8] is too long
meson-axg-s400.dt.yaml: ethernet@
ff3f0000: reg: [[0,
4282318848, 0, 65536, 0,
4284695872, 0, 8]] is too short
meson-g12a-u200.dt.yaml: soc: ethernet@
ff3f0000:reg:0: [0,
4282318848, 0, 65536, 0,
4284695872, 0, 8] is too long
meson-g12a-u200.dt.yaml: ethernet@
ff3f0000: reg: [[0,
4282318848, 0, 65536, 0,
4284695872, 0, 8]] is too short
meson-gxbb-nanopi-k2.dt.yaml: soc: ethernet@
c9410000:reg:0: [0,
3376480256, 0, 65536, 0,
3364046144, 0, 4] is too long
meson-gxl-s805x-libretech-ac.dt.yaml: soc: ethernet@
c9410000:reg:0: [0,
3376480256, 0, 65536, 0,
3364046144, 0, 4] is too lon
while here, also drop the redundant reg property from meson-gxl.dtsi
because it had the same value as meson-gx.dtsi from which it inherits.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
compatible = "amlogic,meson-axg-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
- reg = <0x0 0xff3f0000 0x0 0x10000
- 0x0 0xff634540 0x0 0x8>;
+ reg = <0x0 0xff3f0000 0x0 0x10000>,
+ <0x0 0xff634540 0x0 0x8>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
compatible = "amlogic,meson-axg-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
- reg = <0x0 0xff3f0000 0x0 0x10000
- 0x0 0xff634540 0x0 0x8>;
+ reg = <0x0 0xff3f0000 0x0 0x10000>,
+ <0x0 0xff634540 0x0 0x8>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
compatible = "amlogic,meson-gxbb-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
- reg = <0x0 0xc9410000 0x0 0x10000
- 0x0 0xc8834540 0x0 0x4>;
+ reg = <0x0 0xc9410000 0x0 0x10000>,
+ <0x0 0xc8834540 0x0 0x4>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
rx-fifo-depth = <4096>;
};
ðmac {
- reg = <0x0 0xc9410000 0x0 0x10000
- 0x0 0xc8834540 0x0 0x4>;
-
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;