152 -> Asus Tiger Rev:1.00 [1043:4857]
153 -> Kworld Plus TV Analog Lite PCI [17de:7128]
154 -> Avermedia AVerTV GO 007 FM Plus [1461:f31d]
-155 -> Hauppauge WinTV-HVR1120 [0070:6706,0070:6708]
+155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid [0070:6706,0070:6708]
156 -> Hauppauge WinTV-HVR1110r3 [0070:6707,0070:6709,0070:670a]
select DVB_MT312 if !DVB_FE_CUSTOMISE
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMIZE
---help---
This adds support for DVB cards based on the
Philips saa7134 chip.
},
},
[SAA7134_BOARD_HAUPPAUGE_HVR1120] = {
- .name = "Hauppauge WinTV-HVR1120",
+ .name = "Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tuner_config = 3,
+ .mpeg = SAA7134_MPEG_DVB,
+ .ts_type = SAA7134_MPEG_TS_SERIAL,
.gpiomask = 0x0800100, /* GPIO 21 is an INPUT */
.inputs = {{
.name = name_tv,
#include "isl6405.h"
#include "lnbp21.h"
#include "tuner-simple.h"
+#include "tda18271.h"
+#include "lgdt3305.h"
+#include "tda8290.h"
#include "zl10353.h"
.tuner_address = 0x60,
};
+static struct lgdt3305_config hcw_lgdt3305_config = {
+ .i2c_addr = 0x0e,
+ .mpeg_mode = LGDT3305_MPEG_SERIAL,
+ .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 1,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+ .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x58, },
+ .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x58, },
+};
+
+static struct tda18271_config hcw_tda18271_config = {
+ .std_map = &hauppauge_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+ .config = 3,
+};
+
+static struct tda829x_config tda829x_no_probe = {
+ .probe_tuner = TDA829X_DONT_PROBE,
+};
+
/* ==================================================================
* Core code
*/
&tda827x_cfg_1) < 0)
goto dettach_frontend;
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
+ &hcw_lgdt3305_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &hcw_tda18271_config);
+ }
+ break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
&tda827x_cfg_0) < 0)