--- /dev/null
+ -*-text-*-
+
+Obtaining CVS Code
+------------------
+
+This seems redundant, since if you're reading this you most likely have
+already performed this step; however, for completeness, you can obtain
+the GNU make source code via anonymous CVS from the FSF's Savannah
+project <http://savannah.gnu.org/projects/make/>:
+
+ $ cvs -d:pserver:anoncvs@subversions.gnu.org:/cvsroot/make co make
+
+You might want to use the "-z3" option to get compression, and you most
+certainly will want the -P option to avoid unneeded directories
+cluttering up your source. Personally I add these (as well as -dP for
+update) to my ~/.cvsrc file.
+
+
+If you have an older version of CVS, you might have to login first.
+There is no password; just hit the ENTER key if you are asked for one.
+
+
+Building From CVS
+-----------------
+
+To build GNU make from CVS, you will need Autoconf 2.53 (or better),
+Automake 1.6.1 (or better), and Gettext 0.11.1 (or better), and any
+tools that those utilities require (GNU m4, Perl, etc.).
+
+After checking out the code, you will need to perform these steps to get
+to the point where you can run "configure" then "make".
+
+Hopefully at some point in the (near) future this will all be obsolete
+and you can just run "autoreconf" and have it DTRT.
+
+
+ 1) $ gettextize --no-changelog
+ $ mv config/Makefile.am{~,}
+ $ mv Makefile.am{~,}
+ $ mv configure.in{~,}
+
+ This will instantiate various m4 macros files, etc. in the config
+ and po directories.
+
+ The mv commands are necessary because gettextize doesn't realize
+ that the things it's adding to those files already exist in it.
+
+
+
+ 2) $ aclocal -I config
+
+ Generate the proper aclocal.m4 file.
+
+
+ 3) $ automake --add-missing
+
+ Add (symlink) missing files into the distribution, and generate
+ Makefile.in's from Makefile.am's.
+
+ You will see these perhaps unexpected messages (among others which
+ you should be expecting :)); just ignore them--I know what I'm doing
+ :).
+
+ Makefile.am: required file `./README' not found
+ configure.in:xxx: required file `./build.sh.in' not found
+ Makefile.am:xxx: automatically discovered file `getloadavg.c' should not be explicitly mentioned
+
+
+ 4) $ autoconf
+
+ Generate a "configure" script from configure.in and acinclude.m4.
+
+
+ 5) $ autoheader
+
+ Generate a "config.h.in" file from the contents of configure.in,
+ etc.
+
+
+At this point you have successfully brought your CVS copy of the GNU
+make source directory up to the point where it can be treated
+more-or-less like the official package you would get from ftp.gnu.org.
+That is, you can just run:
+
+ $ ./configure && make && make check && make install
+
+to build and install GNU make.
+
+
+Creating a Package
+------------------
+
+Once you have performed the above steps (including the configuration and
+build) you can create a GNU make package. This is very simple, just
+run:
+
+ $ make dist-gzip
+
+and, if you like:
+
+ $ make dist-bzip2
+
+After you do this you should be sure to run "make distcheck" to be sure
+that the package file is correct.
+
+That's it!
+++ /dev/null
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2002 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-
-SHELL = /bin/sh
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-datadir = @datadir@
-localedir = $(datadir)/locale
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac`
-
-GMSGFMT = @GMSGFMT@
-MSGFMT = @MSGFMT@
-XGETTEXT = @XGETTEXT@
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = @MSGMERGE@ --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in Makevars remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) POTFILES.in $(DOMAIN).pot \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-# Makevars gets inserted here. (Don't remove this line!)
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
-
-.po.mo:
- @echo "$(MSGFMT) -c -o $@ $<"; \
- $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
- @lang=`echo $* | sed -e 's,.*/,,'`; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
- cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
- sed -e '/^#/d' $< > t-$@
- mv t-$@ $@
-
-
-all: all-@USE_NLS@
-
-all-yes: $(CATALOGS)
-all-no:
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
- $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
- --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
- --files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)'
- test ! -f $(DOMAIN).po || { \
- if test -f $(srcdir)/$(DOMAIN).pot; then \
- sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
- sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
- if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
- else \
- rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- else \
- mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
- fi; \
- }
-
-$(srcdir)/$(DOMAIN).pot:
- $(MAKE) $(DOMAIN).pot-update
-
-$(POFILES): $(srcdir)/$(DOMAIN).pot
- @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
- cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext"; then \
- $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
- for file in $(DISTFILES.common); do \
- $(INSTALL_DATA) $(srcdir)/$$file \
- $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-install-data-no: all
-install-data-yes: all
- $(mkinstalldirs) $(DESTDIR)$(datadir)
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkinstalldirs) $(DESTDIR)$$dir; \
- if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
- $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
- echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
- cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
- fi; \
- done; \
- done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext"; then \
- $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
- else \
- : ; \
- fi
-installdirs-data-no:
-installdirs-data-yes:
- $(mkinstalldirs) $(DESTDIR)$(datadir)
- @catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- dir=$(localedir)/$$lang/LC_MESSAGES; \
- $(mkinstalldirs) $(DESTDIR)$$dir; \
- for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
- if test -n "$$lc"; then \
- if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
- link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
- mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
- for file in *; do \
- if test -f $$file; then \
- ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
- fi; \
- done); \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
- else \
- if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
- :; \
- else \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
- mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
- fi; \
- fi; \
- fi; \
- done; \
- done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext"; then \
- for file in $(DISTFILES.common); do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
- else \
- : ; \
- fi
-uninstall-data-no:
-uninstall-data-yes:
- catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
- for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
- rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
- done; \
- done
-
-check: all
-
-dvi info tags TAGS ID:
-
-mostlyclean:
- rm -f remove-potcdate.sed
- rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
- rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
- rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
- rm -f $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
- $(MAKE) update-po
- @$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
- dists="$(DISTFILES)"; \
- if test -f $(srcdir)/ChangeLog; then dists="$$dists ChangeLog"; fi; \
- if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
- for file in $$dists; do \
- if test -f $$file; then \
- cp -p $$file $(distdir); \
- else \
- cp -p $(srcdir)/$$file $(distdir); \
- fi; \
- done
-
-update-po: Makefile
- $(MAKE) $(DOMAIN).pot-update
- $(MAKE) $(UPDATEPOFILES)
- $(MAKE) update-gmo
-
-# General rule for updating PO files.
-
-.nop.po-update:
- @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
- if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \
- tmpdir=`pwd`; \
- echo "$$lang:"; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
- cd $(srcdir); \
- if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
- if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
- rm -f $$tmpdir/$$lang.new.po; \
- else \
- if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
- :; \
- else \
- echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
- exit 1; \
- fi; \
- fi; \
- else \
- echo "msgmerge for $$lang.po failed!" 1>&2; \
- rm -f $$tmpdir/$$lang.new.po; \
- fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
- @:
-
-Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
- $(SHELL) ./config.status
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
projects / platform / upstream / make.git / commitdiff