usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug
authorPiyush Mehta <piyush.mehta@amd.com>
Tue, 20 Sep 2022 05:22:35 +0000 (10:52 +0530)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 26 Oct 2022 10:35:50 +0000 (12:35 +0200)
[ Upstream commit 63d7f9810a38102cdb8cad214fac98682081e1a7 ]

When configured in HOST mode, after issuing U3/L2 exit controller fails
to send proper CRC checksum in CRC5 field. Because of this behavior
Transaction Error is generated, resulting in reset and re-enumeration of
usb device attached. Enabling chicken bit 10 of GUCTL1 will correct this
problem.

When this bit is set to '1', the UTMI/ULPI opmode will be changed to
"normal" along with HS terminations, term, and xcvr signals after EOR.
This option is to support certain legacy UTMI/ULPI PHYs.

Added "snps,resume-hs-terminations" quirk to resolved the above issue.

Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20220920052235.194272-3-piyush.mehta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/usb/dwc3/core.c
drivers/usb/dwc3/core.h

index c32ca69..a2f3e56 100644 (file)
@@ -1041,6 +1041,21 @@ static int dwc3_core_init(struct dwc3 *dwc)
                dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
        }
 
+       /*
+        * When configured in HOST mode, after issuing U3/L2 exit controller
+        * fails to send proper CRC checksum in CRC5 feild. Because of this
+        * behaviour Transaction Error is generated, resulting in reset and
+        * re-enumeration of usb device attached. All the termsel, xcvrsel,
+        * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1
+        * will correct this problem. This option is to support certain
+        * legacy ULPI PHYs.
+        */
+       if (dwc->resume_hs_terminations) {
+               reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
+               reg |= DWC3_GUCTL1_RESUME_OPMODE_HS_HOST;
+               dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
+       }
+
        if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) {
                reg = dwc3_readl(dwc->regs, DWC3_GUCTL1);
 
@@ -1383,6 +1398,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
                                "snps,dis-del-phy-power-chg-quirk");
        dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
                                "snps,dis-tx-ipgap-linecheck-quirk");
+       dwc->resume_hs_terminations = device_property_read_bool(dev,
+                               "snps,resume-hs-terminations");
        dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
                                "snps,parkmode-disable-ss-quirk");
 
index 077d03a..e82e4cb 100644 (file)
 #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS     BIT(28)
 #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW          BIT(24)
 #define DWC3_GUCTL1_PARKMODE_DISABLE_SS                BIT(17)
+#define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST      BIT(10)
 
 /* Global Status Register */
 #define DWC3_GSTS_OTG_IP       BIT(10)
@@ -1072,6 +1073,8 @@ struct dwc3_scratchpad_array {
  *                     change quirk.
  * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
  *                     check during HS transmit.
+ * @resume-hs-terminations: Set if we enable quirk for fixing improper crc
+ *                     generation after resume from suspend.
  * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
  *                     instances in park mode.
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
@@ -1284,6 +1287,7 @@ struct dwc3 {
        unsigned                dis_u2_freeclk_exists_quirk:1;
        unsigned                dis_del_phy_power_chg_quirk:1;
        unsigned                dis_tx_ipgap_linecheck_quirk:1;
+       unsigned                resume_hs_terminations:1;
        unsigned                parkmode_disable_ss_quirk:1;
 
        unsigned                tx_de_emphasis_quirk:1;