# TODO: all of these should be removed
EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
+EXTRA_CFLAGS += -DRT2860
EXTRA_CFLAGS += -DDBG
rt2860sta-objs := \
IN PVOID SystemSpecific2,
IN PVOID SystemSpecific3);
+#ifdef RT2870
+VOID BeaconUpdateExec(
+ IN PVOID SystemSpecific1,
+ IN PVOID FunctionContext,
+ IN PVOID SystemSpecific2,
+ IN PVOID SystemSpecific3);
+#endif // RT2870 //
VOID RTMPSetPiggyBack(
IN PRTMP_ADAPTER pAd,
JAP,
{
{ 1, 14, 20, BOTH, FALSE}, // 2.4 G, ch 1~14
+#ifndef RT30xx
{ 36, 4, 23, IDOR, FALSE}, // 5G, ch 36~48
+#endif
+#ifdef RT30xx
+ { 34, 4, 23, IDOR, FALSE}, // 5G, ch 34~46
+#endif
{ 0}, // end
}
},
Ndis802_11Encryption3KeyAbsent,
Ndis802_11Encryption4Enabled, // TKIP or AES mix
Ndis802_11Encryption4KeyAbsent,
+#ifndef RT30xx
Ndis802_11GroupWEP40Enabled,
Ndis802_11GroupWEP104Enabled,
+#endif
} NDIS_802_11_WEP_STATUS, *PNDIS_802_11_WEP_STATUS,
NDIS_802_11_ENCRYPTION_STATUS, *PNDIS_802_11_ENCRYPTION_STATUS;
#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
#endif
+#ifdef RT30xx
+#define RT_PRIV_IOCTL_EXT (SIOCIWFIRSTPRIV + 0x01) // Sync. with AP for wsc upnp daemon
+#endif
#define RTPRIV_IOCTL_SET (SIOCIWFIRSTPRIV + 0x02)
#ifdef DBG
#define RTPRIV_IOCTL_BBP (SIOCIWFIRSTPRIV + 0x03)
#define RTPRIV_IOCTL_MAC (SIOCIWFIRSTPRIV + 0x05)
+#ifdef RT30xx
+#define RTPRIV_IOCTL_RF (SIOCIWFIRSTPRIV + 0x13)
+#endif
#define RTPRIV_IOCTL_E2P (SIOCIWFIRSTPRIV + 0x07)
#endif
SHOW_DRVIER_VERION = 5,
SHOW_BA_INFO = 6,
SHOW_DESC_INFO = 7,
+#ifdef RT2870
+ SHOW_RXBULK_INFO = 8,
+ SHOW_TXBULK_INFO = 9,
+#endif // RT2870 //
RAIO_OFF = 10,
RAIO_ON = 11,
SHOW_CFG_VALUE = 20,
+#if !defined(RT2860) && !defined(RT30xx)
+ SHOW_ADHOC_ENTRY_INFO = 21,
+#endif
};
#define OID_802_11_BUILD_CHANNEL_EX 0x0714
#define OID_802_11_GET_COUNTRY_CODE 0x0716
#define OID_802_11_GET_CHANNEL_GEOGRAPHY 0x0717
+#ifdef RT30xx
+#define RT_OID_WSC_SET_PASSPHRASE 0x0740 // passphrase for wpa(2)-psk
+#define RT_OID_WSC_DRIVER_AUTO_CONNECT 0x0741
+#define RT_OID_WSC_QUERY_DEFAULT_PROFILE 0x0742
+#define RT_OID_WSC_SET_CONN_BY_PROFILE_INDEX 0x0743
+#define RT_OID_WSC_SET_ACTION 0x0744
+#define RT_OID_WSC_SET_SSID 0x0745
+#define RT_OID_WSC_SET_PIN_CODE 0x0746
+#define RT_OID_WSC_SET_MODE 0x0747 // PIN or PBC
+#define RT_OID_WSC_SET_CONF_MODE 0x0748 // Enrollee or Registrar
+#define RT_OID_WSC_SET_PROFILE 0x0749
+
+#define RT_OID_802_11_WSC_QUERY_PROFILE 0x0750
+// for consistency with RT61
+#define RT_OID_WSC_QUERY_STATUS 0x0751
+#define RT_OID_WSC_PIN_CODE 0x0752
+#define RT_OID_WSC_UUID 0x0753
+#define RT_OID_WSC_SET_SELECTED_REGISTRAR 0x0754
+#define RT_OID_WSC_EAPMSG 0x0755
+#define RT_OID_WSC_MANUFACTURER 0x0756
+#define RT_OID_WSC_MODEL_NAME 0x0757
+#define RT_OID_WSC_MODEL_NO 0x0758
+#define RT_OID_WSC_SERIAL_NO 0x0759
+#define RT_OID_WSC_MAC_ADDRESS 0x0760
+#endif
+
#ifdef LLTD_SUPPORT
// for consistency with RT61
#define RT_OID_GET_PHY_MODE 0x761
#endif // LLTD_SUPPORT //
+#if defined(RT2860) || defined(RT30xx)
// New for MeetingHouse Api support
#define OID_MH_802_1X_SUPPORTED 0xFFEDC100
+#endif
// MIMO Tx parameter, ShortGI, MCS, STBC, etc. these are fields in TXWI. Don't change this definition!!!
typedef union _HTTRANSMIT_SETTING {
} RT_802_11_PREAMBLE, *PRT_802_11_PREAMBLE;
// Only for STA, need to sync with AP
-// 2005-03-08 match current RaConfig.
typedef enum _RT_802_11_PHY_MODE {
PHY_11BG_MIXED = 0,
PHY_11B,
UCHAR ChannelListNum; // number of channel in ChannelList[]
} RT_CHANNEL_LIST_INFO, *PRT_CHANNEL_LIST_INFO;
+#ifdef RT2870
+// WSC configured credential
+typedef struct _WSC_CREDENTIAL
+{
+ NDIS_802_11_SSID SSID; // mandatory
+ USHORT AuthType; // mandatory, 1: open, 2: wpa-psk, 4: shared, 8:wpa, 0x10: wpa2, 0x20: wpa2-psk
+ USHORT EncrType; // mandatory, 1: none, 2: wep, 4: tkip, 8: aes
+ UCHAR Key[64]; // mandatory, Maximum 64 byte
+ USHORT KeyLength;
+ UCHAR MacAddr[6]; // mandatory, AP MAC address
+ UCHAR KeyIndex; // optional, default is 1
+ UCHAR Rsvd[3]; // Make alignment
+} WSC_CREDENTIAL, *PWSC_CREDENTIAL;
+
+// WSC configured profiles
+typedef struct _WSC_PROFILE
+{
+ UINT ProfileCnt;
+ WSC_CREDENTIAL Profile[8]; // Support up to 8 profiles
+} WSC_PROFILE, *PWSC_PROFILE;
+#endif
#endif // _OID_H_
#define PCI_EECTRL 0x0004
#define PCI_MCUCTRL 0x0008
+#ifdef RT30xx
+#define OPT_14 0x114
+
+typedef int NTSTATUS;
+#define RETRY_LIMIT 10
+#define STATUS_SUCCESS 0x00
+#define STATUS_UNSUCCESSFUL 0x01
+#endif
+
//
// SCH/DMA registers - base address 0x0200
//
#define PBF_DBG 0x043c
#define PBF_CAP_CTRL 0x0440
+#ifdef RT30xx
+// eFuse registers
+#define EFUSE_CTRL 0x0580
+#define EFUSE_DATA0 0x0590
+#define EFUSE_DATA1 0x0594
+#define EFUSE_DATA2 0x0598
+#define EFUSE_DATA3 0x059c
+#define EFUSE_USAGE_MAP_START 0x2d0
+#define EFUSE_USAGE_MAP_END 0x2fc
+#define EFUSE_TAG 0x2fe
+#define EFUSE_USAGE_MAP_SIZE 45
+
+typedef union _EFUSE_CTRL_STRUC {
+ struct {
+ UINT32 EFSROM_AOUT:6;
+ UINT32 EFSROM_MODE:2;
+ UINT32 EFSROM_LDO_OFF_TIME:6;
+ UINT32 EFSROM_LDO_ON_TIME:2;
+ UINT32 EFSROM_AIN:10;
+ UINT32 RESERVED:4;
+ UINT32 EFSROM_KICK:1;
+ UINT32 SEL_EFUSE:1;
+ } field;
+ UINT32 word;
+} EFUSE_CTRL_STRUC, *PEFUSE_CTRL_STRUC;
+
+#define LDO_CFG0 0x05d4
+#define GPIO_SWITCH 0x05dc
+#endif /* RT30xx */
+
//
// 4 MAC registers
//
#define E2PROM_CSR 0x0004
#define IO_CNTL_CSR 0x77d0
+#ifdef RT2860
// 8051 firmware image for RT2860 - base address = 0x4000
#define FIRMWARE_IMAGE_BASE 0x2000
#define MAX_FIRMWARE_IMAGE_SIZE 0x2000 // 8kbyte
-
+#endif
+#ifdef RT2870
+// 8051 firmware image for usb - use last-half base address = 0x3000
+#define FIRMWARE_IMAGE_BASE 0x3000
+#define MAX_FIRMWARE_IMAGE_SIZE 0x1000 // 4kbyte
+#endif // RT2870 //
// ================================================================
// Tx / Rx / Mgmt ring descriptor definition
#define BBP_R22 22
#define BBP_R24 24
#define BBP_R25 25
+#ifdef RT30xx
+#define BBP_R31 31
+#endif
#define BBP_R49 49 //TSSI
#define BBP_R50 50
#define BBP_R51 51
#define BBP_R73 73
#define BBP_R75 75
#define BBP_R77 77
+#ifdef RT30xx
+#define BBP_R79 79
+#define BBP_R80 80
+#endif
#define BBP_R81 81
#define BBP_R82 82
#define BBP_R83 83
#define BBP_R121 121
#define BBP_R122 122
#define BBP_R123 123
+#ifdef RT30xx
+#define BBP_R138 138 // add by johnli, RF power sequence setup, ADC dynamic on/off control
+#endif // RT30xx //
#define BBPR94_DEFAULT 0x06 // Add 1 value will gain 1db
//
// Rx descriptor format, Rx Ring
//
+#ifdef RT2860
typedef struct PACKED _RXD_STRUC {
// Word 0
UINT32 SDP0;
UINT32 PlcpRssil:1;// To be moved
UINT32 Rsv1:13;
} RXD_STRUC, *PRXD_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
+#endif /* RT2860 */
//
// RXWI wireless information format, in PBF. invisible in driver.
USHORT EnableWPSPBC:1; // WPS PBC Control bit
USHORT BW40MAvailForG:1; // 0:enable, 1:disable
USHORT BW40MAvailForA:1; // 0:enable, 1:disable
+#ifndef RT30xx
USHORT Rsv2:6; // must be 0
+#endif
+#ifdef RT30xx
+ USHORT Rsv1:1; // must be 0
+ USHORT AntDiversity:1; // Antenna diversity
+ USHORT Rsv2:3; // must be 0
+ USHORT DACTestBit:1; // control if driver should patch the DAC issue
+#endif
} field;
USHORT word;
} EEPROM_NIC_CONFIG2_STRUC, *PEEPROM_NIC_CONFIG2_STRUC;
#include "rtmp_def.h"
#include "rt28xx.h"
+#ifdef RT2860
#include "rt2860.h"
-
+#endif
+#ifdef RT2870
+#include "../rt2870/rt2870.h"
+#endif // RT2870 //
#include "oid.h"
#include "mlme.h"
BUILD_TIMER_FUNCTION(AsicRxAntEvalTimeout);
BUILD_TIMER_FUNCTION(APSDPeriodicExec);
BUILD_TIMER_FUNCTION(AsicRfTuningExec);
+#ifdef RT2870
+BUILD_TIMER_FUNCTION(BeaconUpdateExec);
+#endif // RT2870 //
BUILD_TIMER_FUNCTION(BeaconTimeout);
BUILD_TIMER_FUNCTION(ScanTimeout);
BUILD_TIMER_FUNCTION(LinkDownExec);
BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
+#ifdef RT2860
BUILD_TIMER_FUNCTION(PsPollWakeExec);
BUILD_TIMER_FUNCTION(RadioOnExec);
+#endif
// for wireless system event message
char const *pWirelessSysEventText[IW_SYS_EVENT_TYPE_NUM] = {
NdisFreeSpinLock(&pAd->MgmtRingLock);
-
+#ifdef RT2860
NdisFreeSpinLock(&pAd->RxRingLock);
-
+#endif
for (index =0 ; index < NUM_OF_TX_RING; index++)
{
NdisFreeSpinLock(&pAd->TxSwQueueLock[index]);
if (pRxBlk->DataSize + sizeof(wlan_ng_prism2_header) > RX_BUFFER_AGGRESIZE)
{
+#ifndef RT30xx
DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%zu)\n", __func__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
+#endif
+#ifdef RT30xx
+ DBGPRINT(RT_DEBUG_ERROR, ("%s : Size is too large! (%d)\n", __func__, pRxBlk->DataSize + sizeof(wlan_ng_prism2_header)));
+#endif
goto err_free_sk_buff;
}
#include "rtmp_type.h"
#include <linux/module.h>
#include <linux/kernel.h>
+#if !defined(RT2860) && !defined(RT30xx)
+#include <linux/kthread.h>
+#endif
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/vmalloc.h>
+#ifdef RT30xx
+#include <linux/wireless.h>
+#endif
#include <net/iw_handler.h>
// load firmware
// add by kathy
+#ifdef RT2860
#define STA_PROFILE_PATH "/etc/Wireless/RT2860STA/RT2860STA.dat"
#define STA_RTMP_FIRMWARE_FILE_NAME "/etc/Wireless/RT2860STA/RT2860STA.bin"
#define STA_NIC_DEVICE_NAME "RT2860STA"
#define STA_DRIVER_VERSION "1.8.1.1"
+#endif
+#ifdef RT2870
+#define STA_PROFILE_PATH "/etc/Wireless/RT2870STA/RT2870STA.dat"
+#define STA_RT2870_IMAGE_FILE_NAME "/etc/Wireless/RT2870STA/rt2870.bin"
+#define STA_NIC_DEVICE_NAME "RT2870STA"
+#ifndef RT30xx
+#define STA_DRIVER_VERSION "1.4.0.0"
+#endif
+#ifdef RT30xx
+#define STA_DRIVER_VERSION "2.0.1.0"
+#endif
+#endif
+#ifdef RT2860
#ifndef PCI_DEVICE
#define PCI_DEVICE(vend,dev) \
.vendor = (vend), .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
#endif // PCI_DEVICE //
+#endif
#define RTMP_TIME_AFTER(a,b) \
(typecheck(unsigned long, (unsigned long)a) && \
#define NDIS_PACKET_TYPE_BROADCAST 2
#define NDIS_PACKET_TYPE_ALL_MULTICAST 3
+#ifndef RT30xx
typedef struct pid * THREAD_PID;
+#ifdef RT2860
#define THREAD_PID_INIT_VALUE NULL
+#endif
#define GET_PID(_v) find_get_pid(_v)
#define GET_PID_NUMBER(_v) pid_nr(_v)
#define CHECK_PID_LEGALITY(_pid) if (pid_nr(_pid) >= 0)
#define KILL_THREAD_PID(_A, _B, _C) kill_pid(_A, _B, _C)
+#endif
struct os_lock {
spinlock_t lock;
struct os_cookie {
+#ifdef RT2860
struct pci_dev *pci_dev;
struct pci_dev *parent_pci_dev;
dma_addr_t pAd_pa;
+#endif
+#ifdef RT2870
+ struct usb_device *pUsb_Dev;
+#ifndef RT30xx
+ struct task_struct *MLMEThr_task;
+ struct task_struct *RTUSBCmdThr_task;
+ struct task_struct *TimerQThr_task;
+#endif
+#ifdef RT30xx
+ struct pid *MLMEThr_pid;
+ struct pid *RTUSBCmdThr_pid;
+ struct pid *TimerQThr_pid;
+#endif
+#endif // RT2870 //
struct tasklet_struct rx_done_task;
struct tasklet_struct mgmt_dma_done_task;
struct tasklet_struct ac3_dma_done_task;
struct tasklet_struct hcca_dma_done_task;
struct tasklet_struct tbtt_task;
+#ifdef RT2860
struct tasklet_struct fifo_statistic_full_task;
-
+#endif
+#ifdef RT2870
+ struct tasklet_struct null_frame_complete_task;
+ struct tasklet_struct rts_frame_complete_task;
+ struct tasklet_struct pspoll_frame_complete_task;
+#endif // RT2870 //
unsigned long apd_pid; //802.1x daemon pid
INT ioctl_if_type;
#define RT2860_PCI_DEVICE_ID 0x0601
+#ifdef RT2860
#define PCI_MAP_SINGLE(_handle, _ptr, _size, _sd_idx, _dir) \
linux_pci_map_single(_handle, _ptr, _size, _sd_idx, _dir)
#define DEV_ALLOC_SKB(_length) \
dev_alloc_skb(_length)
+#endif
+#ifdef RT2870
+#define PCI_MAP_SINGLE(_handle, _ptr, _size, _dir) (ULONG)0
+#define PCI_UNMAP_SINGLE(_handle, _ptr, _size, _dir)
+#endif // RT2870 //
#define BEACON_FRAME_DMA_CACHE_WBACK(_ptr, _size) \
#define NdisMIndicateStatus(_w, _x, _y, _z)
-
typedef struct timer_list RTMP_OS_TIMER;
+#ifdef RT2870
+/* ----------------- Timer Related MARCO ---------------*/
+// In RT2870, we have a lot of timer functions and will read/write register, it's
+// not allowed in Linux USB sub-system to do it ( because of sleep issue when submit
+// to ctrl pipe). So we need a wrapper function to take care it.
+
+typedef VOID (*RT2870_TIMER_HANDLE)(
+ IN PVOID SystemSpecific1,
+ IN PVOID FunctionContext,
+ IN PVOID SystemSpecific2,
+ IN PVOID SystemSpecific3);
+#endif // RT2870 //
typedef struct _RALINK_TIMER_STRUCT {
BOOLEAN Repeat; // True if periodic timer
ULONG TimerValue; // Timer value in milliseconds
ULONG cookie; // os specific object
+#ifdef RT2870
+ RT2870_TIMER_HANDLE handle;
+ void *pAd;
+#endif // RT2870 //
} RALINK_TIMER_STRUCT, *PRALINK_TIMER_STRUCT;
+#ifdef RT2870
+
+typedef enum _RT2870_KERNEL_THREAD_STATUS_
+{
+ RT2870_THREAD_UNKNOWN = 0,
+ RT2870_THREAD_INITED = 1,
+ RT2870_THREAD_RUNNING = 2,
+ RT2870_THREAD_STOPED = 4,
+}RT2870_KERNEL_THREAD_STATUS;
+
+#define RT2870_THREAD_CAN_DO_INSERT (RT2870_THREAD_INITED |RT2870_THREAD_RUNNING)
+
+typedef struct _RT2870_TIMER_ENTRY_
+{
+ RALINK_TIMER_STRUCT *pRaTimer;
+ struct _RT2870_TIMER_ENTRY_ *pNext;
+}RT2870_TIMER_ENTRY;
+
+
+#define TIMER_QUEUE_SIZE_MAX 128
+typedef struct _RT2870_TIMER_QUEUE_
+{
+ unsigned int status;
+ UCHAR *pTimerQPoll;
+ RT2870_TIMER_ENTRY *pQPollFreeList;
+ RT2870_TIMER_ENTRY *pQHead;
+ RT2870_TIMER_ENTRY *pQTail;
+}RT2870_TIMER_QUEUE;
+#endif // RT2870 //
//#define DBG 1
spin_unlock_irqrestore((spinlock_t *)(__lock), ((unsigned long)__irqflag)); \
}
+#ifdef RT2860
#if defined(INF_TWINPASS) || defined(INF_DANUBE) || defined(IKANOS_VX_1X0)
//Patch for ASIC turst read/write bug, needs to remove after metel fix
#define RTMP_IO_READ32(_A, _R, _pV) \
writew((_V), (PUSHORT)((_A)->CSRBaseAddress + (_R))); \
}
#endif
+#endif /* RT2860 */
+#ifdef RT2870
+//Patch for ASIC turst read/write bug, needs to remove after metel fix
+#define RTMP_IO_READ32(_A, _R, _pV) \
+ RTUSBReadMACRegister(_A, _R, _pV)
+
+#define RTMP_IO_READ8(_A, _R, _pV) \
+{ \
+}
+#define RTMP_IO_WRITE32(_A, _R, _V) \
+ RTUSBWriteMACRegister(_A, _R, _V)
+
+
+#define RTMP_IO_WRITE8(_A, _R, _V) \
+{ \
+ USHORT _Val = _V; \
+ RTUSBSingleWrite(_A, _R, _Val); \
+}
+
+
+#define RTMP_IO_WRITE16(_A, _R, _V) \
+{ \
+ RTUSBSingleWrite(_A, _R, _V); \
+}
+#endif // RT2870 //
#ifndef wait_event_interruptible_timeout
#define __wait_event_interruptible_timeout(wq, condition, ret) \
wait_event_interruptible_timeout(_wait, 0, ONE_TICK); }
-/* Modified by Wu Xi-Kun 4/21/2006 */
typedef void (*TIMER_FUNCTION)(unsigned long);
#define COPY_MAC_ADDR(Addr1, Addr2) memcpy((Addr1), (Addr2), MAC_ADDR_LEN)
#define MlmeAllocateMemory(_pAd, _ppVA) os_alloc_mem(_pAd, _ppVA, MGMT_DMA_BUFFER_SIZE)
#define MlmeFreeMemory(_pAd, _pVA) os_free_mem(_pAd, _pVA)
+#ifdef RT2860
#define BUILD_TIMER_FUNCTION(_func) \
void linux_##_func(unsigned long data) \
{ \
if (pTimer->Repeat) \
RTMP_OS_Add_Timer(&pTimer->TimerObj, pTimer->TimerValue); \
}
-
+#endif
+#ifdef RT2870
+#define BUILD_TIMER_FUNCTION(_func) \
+void linux_##_func(unsigned long data) \
+{ \
+ PRALINK_TIMER_STRUCT _pTimer = (PRALINK_TIMER_STRUCT)data; \
+ RT2870_TIMER_ENTRY *_pQNode; \
+ RTMP_ADAPTER *_pAd; \
+ \
+ _pTimer->handle = _func; \
+ _pAd = (RTMP_ADAPTER *)_pTimer->pAd; \
+ _pQNode = RT2870_TimerQ_Insert(_pAd, _pTimer); \
+ if ((_pQNode == NULL) && (_pAd->TimerQ.status & RT2870_THREAD_CAN_DO_INSERT)) \
+ RTMP_OS_Add_Timer(&_pTimer->TimerObj, HZ); \
+}
+#endif // RT2870 //
#define DECLARE_TIMER_FUNCTION(_func) \
DECLARE_TIMER_FUNCTION(AsicRxAntEvalTimeout);
DECLARE_TIMER_FUNCTION(APSDPeriodicExec);
DECLARE_TIMER_FUNCTION(AsicRfTuningExec);
+#ifdef RT2870
+DECLARE_TIMER_FUNCTION(BeaconUpdateExec);
+#endif // RT2870 //
DECLARE_TIMER_FUNCTION(BeaconTimeout);
DECLARE_TIMER_FUNCTION(ScanTimeout);
void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify);
+#ifdef RT2860
#if !defined(PCI_CAP_ID_EXP)
#define PCI_CAP_ID_EXP 0x10
#endif
#endif
#define PCIBUS_INTEL_VENDOR 0x8086
-
+#endif
extern void ba_reordering_resource_release(PRTMP_ADAPTER pAd);
extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd);
+#ifdef RT2860
extern void init_thread_task(PRTMP_ADAPTER pAd);
+#endif
// public function prototype
INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p,
RTMP_ADAPTER *pAd = net_dev->ml_priv;
BOOLEAN Cancelled = FALSE;
UINT32 i = 0;
+#ifdef RT2870
+ DECLARE_WAIT_QUEUE_HEAD(unlink_wakeup);
+ DECLARE_WAITQUEUE(wait, current);
+
+ //RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
+#endif // RT2870 //
DBGPRINT(RT_DEBUG_TRACE, ("===> rt28xx_close\n"));
{
// If dirver doesn't wake up firmware here,
// NICLoadFirmware will hang forever when interface is up again.
+#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE) ||
RTMP_SET_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND) ||
RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF))
+#endif
+#ifdef RT2870
+ if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
+#endif
{
+#ifdef RT2860
AsicForceWakeup(pAd, RTMP_HALT);
+#endif
+#ifdef RT2870
+ AsicForceWakeup(pAd, TRUE);
+#endif
}
if (INFRA_ON(pAd) &&
RTMPusecDelay(1000);
}
+#ifdef RT2870
+ RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
+#endif // RT2870 //
#ifdef CCX_SUPPORT
RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &Cancelled);
RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
MlmeRadioOff(pAd);
+#ifdef RT2860
pAd->bPCIclkOff = FALSE;
+#endif
}
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
}
}
+#ifdef RT2870
+ // ensure there are no more active urbs.
+ add_wait_queue (&unlink_wakeup, &wait);
+ pAd->wait = &unlink_wakeup;
+
+ // maybe wait for deletions to finish.
+ i = 0;
+ //while((i < 25) && atomic_read(&pAd->PendingRx) > 0)
+ while(i < 25)
+ {
+ unsigned long IrqFlags;
+
+ RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
+ if (pAd->PendingRx == 0)
+ {
+ RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
+ break;
+ }
+ RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
+
+ msleep(UNLINK_TIMEOUT_MS); //Time in millisecond
+ i++;
+ }
+ pAd->wait = NULL;
+ remove_wait_queue (&unlink_wakeup, &wait);
+#endif // RT2870 //
+
+#ifdef RT2870
+ // We need clear timerQ related structure before exits of the timer thread.
+ RT2870_TimerQ_Exit(pAd);
+ // Close kernel threads or tasklets
+ RT28xxThreadTerminate(pAd);
+#endif // RT2870 //
+
// Stop Mlme state machine
MlmeHalt(pAd);
MeasureReqTabExit(pAd);
TpcReqTabExit(pAd);
-
+#ifdef RT2860
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
NICDisableInterrupt(pAd);
RT28XX_IRQ_RELEASE(net_dev)
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
-
+#endif
// Free Ring or USB buffers
RTMPFreeTxRxRingMemory(pAd);
static int rt28xx_init(IN struct net_device *net_dev)
{
+#ifdef RT2860
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)net_dev->ml_priv;
+#endif
+#ifdef RT2870
+ PRTMP_ADAPTER pAd = net_dev->ml_priv;
+#endif
UINT index;
UCHAR TmpPhy;
NDIS_STATUS Status;
} while (index++ < 100);
DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion));
+/*Iverson patch PCIE L1 issue */
// Disable DMA
RT28XXDMADisable(pAd);
-
// Load 8051 firmware
Status = NICLoadFirmware(pAd);
if (Status != NDIS_STATUS_SUCCESS)
// Disable interrupts here which is as soon as possible
// This statement should never be true. We might consider to remove it later
+#ifdef RT2860
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
NICDisableInterrupt(pAd);
}
+#endif
Status = RTMPAllocTxRxRingMemory(pAd);
if (Status != NDIS_STATUS_SUCCESS)
//
UserCfgInit(pAd);
+#ifdef RT2870
+ // We need init timerQ related structure before create the timer thread.
+ RT2870_TimerQ_Init(pAd);
+#endif // RT2870 //
RT28XX_TASK_THREAD_INIT(pAd, Status);
if (Status != NDIS_STATUS_SUCCESS)
goto err4;
}
+#ifdef RT2870
+ pAd->CommonCfg.bMultipleIRP = FALSE;
+
+ if (pAd->CommonCfg.bMultipleIRP)
+ pAd->CommonCfg.NumOfBulkInIRP = RX_RING_SIZE;
+ else
+ pAd->CommonCfg.NumOfBulkInIRP = 1;
+#endif // RT2870 //
//Init Ba Capability parameters.
pAd->CommonCfg.HtCapability.MCSSet[1], pAd->CommonCfg.HtCapability.MCSSet[2],
pAd->CommonCfg.HtCapability.MCSSet[3], pAd->CommonCfg.HtCapability.MCSSet[4]);
+#ifdef RT2870
+ //Init RT30xx RFRegisters after read RFIC type from EEPROM
+ NICInitRT30xxRFRegisters(pAd);
+#endif // RT2870 //
+
#ifdef IKANOS_VX_1X0
VR_IKANOS_FP_Init(pAd->ApCfg.BssidNum, pAd->PermanentAddress);
#endif // IKANOS_VX_1X0 //
AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.Channel);
+#ifndef RT30xx
// 8051 firmware require the signal during booting time.
AsicSendCommandToMcu(pAd, 0x72, 0xFF, 0x00, 0x00);
+#endif
if (pAd && (Status != NDIS_STATUS_SUCCESS))
{
// Microsoft HCT require driver send a disconnect event after driver initialization.
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_MEDIA_STATE_CHANGE);
+
DBGPRINT(RT_DEBUG_TRACE, ("NDIS_STATUS_MEDIA_DISCONNECT Event B!\n"));
+#ifdef RT2870
+ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
+ RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_REMOVE_IN_PROGRESS);
+
+ //
+ // Support multiple BulkIn IRP,
+ // the value on pAd->CommonCfg.NumOfBulkInIRP may be large than 1.
+ //
+ for(index=0; index<pAd->CommonCfg.NumOfBulkInIRP; index++)
+ {
+ RTUSBBulkReceive(pAd);
+ DBGPRINT(RT_DEBUG_TRACE, ("RTUSBBulkReceive!\n" ));
+ }
+#endif // RT2870 //
}// end of else
printk("0x1300 = %08x\n", reg);
}
+#ifdef RT2860
RTMPInitPCIeLinkCtrlValue(pAd);
-
+#endif
return (retval);
err:
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) NULL;
INT status;
PVOID handle;
+#ifdef RT2860
struct pci_dev *dev_p = (struct pci_dev *)_dev_p;
+#endif
+#ifdef RT2870
+ struct usb_interface *intf = (struct usb_interface *)_dev_p;
+ struct usb_device *dev_p = interface_to_usbdev(intf);
+ dev_p = usb_get_dev(dev_p);
+#endif // RT2870 //
DBGPRINT(RT_DEBUG_TRACE, ("STA Driver version-%s\n", STA_DRIVER_VERSION));
// Save uid and gid used for filesystem access.
// Set user and group to 0 (root)
+#ifndef RT30xx
orgfsuid = current_fsuid();
orgfsgid = current_fsgid();
/* Hm, can't really do this nicely anymore, so rely on these files
* being set to the proper permission to read them... */
/* current->cred->fsuid = current->cred->fsgid = 0; */
+#endif
orgfs = get_fs();
set_fs(KERNEL_DS);
{
//PSMode
+#ifdef RT2860
if (RTMPGetKeyParameter("PSMode", tmpbuf, 32, buffer))
+#endif
+#ifdef RT2870
+ if (RTMPGetKeyParameter("PSMode", tmpbuf, 10, buffer))
+#endif
{
if (pAd->StaCfg.BssType == BSS_INFRA)
{
DBGPRINT(RT_DEBUG_TRACE, ("TGnWifiTest=%d\n", pAd->StaCfg.bTGnWifiTest));
}
}
+
+#ifdef RT30xx
+ {
+ if(RTMPGetKeyParameter("AntDiversity", tmpbuf, 10, buffer))
+ {
+ for (i = 0, macptr = rstrtok(tmpbuf,";"); macptr; macptr = rstrtok(NULL,";"), i++)
+ {
+ if(simple_strtol(macptr, 0, 10) != 0) //Enable
+ pAd->CommonCfg.bRxAntDiversity = TRUE;
+ else //Disable
+ pAd->CommonCfg.bRxAntDiversity = FALSE;
+
+ DBGPRINT(RT_DEBUG_ERROR, ("AntDiversity=%d\n", pAd->CommonCfg.bRxAntDiversity));
+ }
+ }
+ }
+#endif // RT30xx //
}
}
else
if (Value == 0)
{
pAd->CommonCfg.BACapability.field.AutoBA = FALSE;
+#ifdef RT30xx
+ pAd->CommonCfg.BACapability.field.Policy = BA_NOTUSE;
+#endif
}
else
{
pAd->CommonCfg.BACapability.field.AutoBA = TRUE;
+#ifdef RT30xx
+ pAd->CommonCfg.BACapability.field.Policy = IMMED_BA;
+#endif
}
pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA;
+#ifdef RT30xx
+ pAd->CommonCfg.REGBACapability.field.Policy = pAd->CommonCfg.BACapability.field.Policy;
+#endif
DBGPRINT(RT_DEBUG_TRACE, ("HT: Auto BA = %s\n", (Value==0) ? "Disable" : "Enable"));
}
#define VIRTUAL_IF_DEC(__pAd) ((__pAd)->VirtualIfCnt--)
#define VIRTUAL_IF_NUM(__pAd) ((__pAd)->VirtualIfCnt)
+#ifdef RT2870
+////////////////////////////////////////////////////////////////////////////
+// The TX_BUFFER structure forms the transmitted USB packet to the device
+////////////////////////////////////////////////////////////////////////////
+typedef struct __TX_BUFFER{
+ union {
+ UCHAR WirelessPacket[TX_BUFFER_NORMSIZE];
+ HEADER_802_11 NullFrame;
+ PSPOLL_FRAME PsPollPacket;
+ RTS_FRAME RTSFrame;
+ }field;
+ UCHAR Aggregation[4]; //Buffer for save Aggregation size.
+} TX_BUFFER, *PTX_BUFFER;
+
+typedef struct __HTTX_BUFFER{
+ union {
+ UCHAR WirelessPacket[MAX_TXBULK_SIZE];
+ HEADER_802_11 NullFrame;
+ PSPOLL_FRAME PsPollPacket;
+ RTS_FRAME RTSFrame;
+ }field;
+ UCHAR Aggregation[4]; //Buffer for save Aggregation size.
+} HTTX_BUFFER, *PHTTX_BUFFER;
+
+
+// used to track driver-generated write irps
+typedef struct _TX_CONTEXT
+{
+ PVOID pAd; //Initialized in MiniportInitialize
+ PURB pUrb; //Initialized in MiniportInitialize
+ PIRP pIrp; //used to cancel pending bulk out.
+ //Initialized in MiniportInitialize
+ PTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize
+ ULONG BulkOutSize;
+ UCHAR BulkOutPipeId;
+ UCHAR SelfIdx;
+ BOOLEAN InUse;
+ BOOLEAN bWaitingBulkOut; // at least one packet is in this TxContext, ready for making IRP anytime.
+ BOOLEAN bFullForBulkOut; // all tx buffer are full , so waiting for tx bulkout.
+ BOOLEAN IRPPending;
+ BOOLEAN LastOne;
+ BOOLEAN bAggregatible;
+ UCHAR Header_802_3[LENGTH_802_3];
+ UCHAR Rsv[2];
+ ULONG DataOffset;
+ UINT TxRate;
+ dma_addr_t data_dma; // urb dma on linux
+
+} TX_CONTEXT, *PTX_CONTEXT, **PPTX_CONTEXT;
+
+
+// used to track driver-generated write irps
+typedef struct _HT_TX_CONTEXT
+{
+ PVOID pAd; //Initialized in MiniportInitialize
+ PURB pUrb; //Initialized in MiniportInitialize
+ PIRP pIrp; //used to cancel pending bulk out.
+ //Initialized in MiniportInitialize
+ PHTTX_BUFFER TransferBuffer; //Initialized in MiniportInitialize
+ ULONG BulkOutSize; // Indicate the total bulk-out size in bytes in one bulk-transmission
+ UCHAR BulkOutPipeId;
+ BOOLEAN IRPPending;
+ BOOLEAN LastOne;
+ BOOLEAN bCurWriting;
+ BOOLEAN bRingEmpty;
+ BOOLEAN bCopySavePad;
+ UCHAR SavedPad[8];
+ UCHAR Header_802_3[LENGTH_802_3];
+ ULONG CurWritePosition; // Indicate the buffer offset which packet will be inserted start from.
+ ULONG CurWriteRealPos; // Indicate the buffer offset which packet now are writing to.
+ ULONG NextBulkOutPosition; // Indicate the buffer start offset of a bulk-transmission
+ ULONG ENextBulkOutPosition; // Indicate the buffer end offset of a bulk-transmission
+ UINT TxRate;
+ dma_addr_t data_dma; // urb dma on linux
+} HT_TX_CONTEXT, *PHT_TX_CONTEXT, **PPHT_TX_CONTEXT;
+
+
+//
+// Structure to keep track of receive packets and buffers to indicate
+// receive data to the protocol.
+//
+typedef struct _RX_CONTEXT
+{
+ PUCHAR TransferBuffer;
+ PVOID pAd;
+ PIRP pIrp;//used to cancel pending bulk in.
+ PURB pUrb;
+ //These 2 Boolean shouldn't both be 1 at the same time.
+ ULONG BulkInOffset; // number of packets waiting for reordering .
+ BOOLEAN bRxHandling; // Notify this packet is being process now.
+ BOOLEAN InUse; // USB Hardware Occupied. Wait for USB HW to put packet.
+ BOOLEAN Readable; // Receive Complete back. OK for driver to indicate receiving packet.
+ BOOLEAN IRPPending; // TODO: To be removed
+ atomic_t IrpLock;
+ NDIS_SPIN_LOCK RxContextLock;
+ dma_addr_t data_dma; // urb dma on linux
+} RX_CONTEXT, *PRX_CONTEXT;
+#endif // RT2870 //
//
extern UCHAR Wpa2Ie;
extern UCHAR IbssIe;
extern UCHAR Ccx2Ie;
+#ifdef RT30xx
+extern UCHAR WapiIe;
+#endif
extern UCHAR WPA_OUI[];
extern UCHAR RSN_OUI[];
+#ifdef RT30xx
+extern UCHAR WAPI_OUI[];
+#endif
extern UCHAR WME_INFO_ELEM[];
extern UCHAR WME_PARM_ELEM[];
extern UCHAR Ccx2QosInfo[];
#define RTMP_TEST_FLAG(_M, _F) (((_M)->Flags & (_F)) != 0)
#define RTMP_TEST_FLAGS(_M, _F) (((_M)->Flags & (_F)) == (_F))
+#ifdef RT2860
// Macro for power save flag.
#define RTMP_SET_PSFLAG(_M, _F) ((_M)->PSFlags |= (_F))
#define RTMP_CLEAR_PSFLAG(_M, _F) ((_M)->PSFlags &= ~(_F))
#define RTMP_CLEAR_PSFLAGS(_M) ((_M)->PSFlags = 0)
#define RTMP_TEST_PSFLAG(_M, _F) (((_M)->PSFlags & (_F)) != 0)
#define RTMP_TEST_PSFLAGS(_M, _F) (((_M)->PSFlags & (_F)) == (_F))
+#endif
#define OPSTATUS_SET_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags |= (_F))
#define OPSTATUS_CLEAR_FLAG(_pAd, _F) ((_pAd)->CommonCfg.OpStatusFlags &= ~(_F))
(_idx) = (_idx+1) % (_RingSize); \
}
+#ifdef RT30xx
+// We will have a cost down version which mac version is 0x3090xxxx
+#define IS_RT3090(_pAd) ((((_pAd)->MACVersion & 0xffff0000) == 0x30710000) || (((_pAd)->MACVersion & 0xffff0000) == 0x30900000))
+#endif
#define IS_RT3070(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30700000)
+#ifdef RT30xx
+#define IS_RT3071(_pAd) (((_pAd)->MACVersion & 0xffff0000) == 0x30710000)
+#define IS_RT2070(_pAd) (((_pAd)->RfIcType == RFIC_2020) || ((_pAd)->EFuseTag == 0x27))
+
+#define IS_RT30xx(_pAd) (((_pAd)->MACVersion & 0xfff00000) == 0x30700000)
+#endif
#define RING_PACKET_INIT(_TxRing, _idx) \
{ \
//
#define MAX_BUSY_COUNT 100 // Number of retry before failing access BBP & RF indirect register
//
+#ifdef RT2860
#define RTMP_RF_IO_WRITE32(_A, _V) \
{ \
PHY_CSR4_STRUC Value; \
} \
} \
}
+#endif /* RT2860 */
+#ifdef RT2870
+#define RTMP_RF_IO_WRITE32(_A, _V) RTUSBWriteRFRegister(_A, _V)
+#define RTMP_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV)
+#define RTMP_BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTUSBWriteBBPRegister(_A, _I, _V)
+
+#define BBP_IO_WRITE8_BY_REG_ID(_A, _I, _V) RTUSBWriteBBPRegister(_A, _I, _V)
+#define BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) RTUSBReadBBPRegister(_A, _I, _pV)
+#endif // RT2870 //
+#ifdef RT30xx
+#define RTMP_RF_IO_READ8_BY_REG_ID(_A, _I, _pV) RT30xxReadRFRegister(_A, _I, _pV)
+#define RTMP_RF_IO_WRITE8_BY_REG_ID(_A, _I, _V) RT30xxWriteRFRegister(_A, _I, _V)
+#endif // RT30xx //
#define MAP_CHANNEL_ID_TO_KHZ(ch, khz) { \
switch (ch) \
// Enqueue this frame to MLME engine
// We need to enqueue the whole frame because MLME need to pass data type
// information from 802.11 header
+#ifdef RT2860
#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \
{ \
UINT32 High32TSF, Low32TSF; \
RTMP_IO_READ32(_pAd, TSF_TIMER_DW0, &Low32TSF); \
MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \
}
+#endif
+#ifdef RT2870
+#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \
+{ \
+ UINT32 High32TSF=0, Low32TSF=0; \
+ MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \
+}
+#endif // RT2870 //
+
+#ifdef RT30xx
+//Need to collect each ant's rssi concurrently
+//rssi1 is report to pair2 Ant and rss2 is reprot to pair1 Ant when 4 Ant
+#define COLLECT_RX_ANTENNA_AVERAGE_RSSI(_pAd, _rssi1, _rssi2) \
+{ \
+ SHORT AvgRssi; \
+ UCHAR UsedAnt; \
+ if (_pAd->RxAnt.EvaluatePeriod == 0) \
+ { \
+ UsedAnt = _pAd->RxAnt.Pair1PrimaryRxAnt; \
+ AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt]; \
+ if (AvgRssi < 0) \
+ AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1; \
+ else \
+ AvgRssi = _rssi1 << 3; \
+ _pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi; \
+ } \
+ else \
+ { \
+ UsedAnt = _pAd->RxAnt.Pair1SecondaryRxAnt; \
+ AvgRssi = _pAd->RxAnt.Pair1AvgRssi[UsedAnt]; \
+ if ((AvgRssi < 0) && (_pAd->RxAnt.FirstPktArrivedWhenEvaluate)) \
+ AvgRssi = AvgRssi - (AvgRssi >> 3) + _rssi1; \
+ else \
+ { \
+ _pAd->RxAnt.FirstPktArrivedWhenEvaluate = TRUE; \
+ AvgRssi = _rssi1 << 3; \
+ } \
+ _pAd->RxAnt.Pair1AvgRssi[UsedAnt] = AvgRssi; \
+ _pAd->RxAnt.RcvPktNumWhenEvaluate++; \
+ } \
+}
+#endif // RT30xx //
+
#define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen) \
NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen)
//
#define JapanChannelCheck(channel) ((channel == 52) || (channel == 56) || (channel == 60) || (channel == 64))
+#ifdef RT2860
#define STA_PORT_SECURED(_pAd) \
{ \
_pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
_pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
NdisReleaseSpinLock(&(_pAd)->MacTabLock); \
}
+#endif
+#ifdef RT2870
+#define STA_PORT_SECURED(_pAd) \
+{ \
+ _pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; \
+ NdisAcquireSpinLock(&_pAd->MacTabLock); \
+ _pAd->MacTab.Content[BSSID_WCID].PortSecured = _pAd->StaCfg.PortSecured; \
+ NdisReleaseSpinLock(&_pAd->MacTabLock); \
+}
+#endif
//
// Register set pair for initialzation register set definition
UCHAR DataOffset;
USHORT Datasize;
ULONG AllocSize;
+#ifdef RT2860
NDIS_PHYSICAL_ADDRESS AllocPa; // TxBuf physical address
+#endif
+#ifdef RT2870
+ PUCHAR AllocPa;
+#endif // RT2870 //
} RTMP_REORDERBUF, *PRTMP_REORDERBUF;
//
typedef struct _COUNTER_RALINK {
ULONG TransmittedByteCount; // both successful and failure, used to calculate TX throughput
+#ifdef RT2860
ULONG LastReceivedByteCount;
+#endif
ULONG ReceivedByteCount; // both CRC okay and CRC error, used to calculate RX throughput
ULONG BeenDisassociatedCount;
ULONG BadCQIAutoRecoveryCount;
UINT32 OneSecFrameDuplicateCount;
+#ifdef RT2870
+ ULONG OneSecTransmittedByteCount; // both successful and failure, used to calculate TX throughput
+#endif // RT2870 //
UINT32 OneSecTxNoRetryOkCount;
UINT32 OneSecTxRetryOkCount;
typedef struct _SOFT_RX_ANT_DIVERSITY_STRUCT {
UCHAR EvaluatePeriod; // 0:not evalute status, 1: evaluate status, 2: switching status
+#ifdef RT30xx
+ UCHAR EvaluateStableCnt;
+#endif
UCHAR Pair1PrimaryRxAnt; // 0:Ant-E1, 1:Ant-E2
UCHAR Pair1SecondaryRxAnt; // 0:Ant-E1, 1:Ant-E2
UCHAR Pair2PrimaryRxAnt; // 0:Ant-E3, 1:Ant-E4
RALINK_TIMER_STRUCT APSDPeriodicTimer;
RALINK_TIMER_STRUCT LinkDownTimer;
RALINK_TIMER_STRUCT LinkUpTimer;
+#ifdef RT2860
UCHAR bPsPollTimerRunning;
RALINK_TIMER_STRUCT PsPollTimer;
RALINK_TIMER_STRUCT RadioOnOffTimer;
+#endif
ULONG PeriodicRound;
ULONG OneSecPeriodicRound;
BOOLEAN bEnableAutoAntennaCheck;
RALINK_TIMER_STRUCT RxAntEvalTimer;
-
+#ifdef RT2870
+ UCHAR CaliBW40RfR24;
+ UCHAR CaliBW20RfR24;
+#endif // RT2870 //
} MLME_STRUCT, *PMLME_STRUCT;
// structure for radar detection and channel switch
UCHAR bit_offset = wcid & 0x7; \
ad_p->ApCfg.MBSSID[apidx].TimBitmaps[tim_offset] |= BIT8[bit_offset]; }
+#ifdef RT2870
+#define BEACON_BITMAP_MASK 0xff
+typedef struct _BEACON_SYNC_STRUCT_
+{
+ UCHAR BeaconBuf[HW_BEACON_MAX_COUNT][HW_BEACON_OFFSET];
+ UCHAR BeaconTxWI[HW_BEACON_MAX_COUNT][TXWI_SIZE];
+ ULONG TimIELocationInBeacon[HW_BEACON_MAX_COUNT];
+ ULONG CapabilityInfoLocationInBeacon[HW_BEACON_MAX_COUNT];
+ BOOLEAN EnableBeacon; // trigger to enable beacon transmission.
+ UCHAR BeaconBitMap; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
+ UCHAR DtimBitOn; // NOTE: If the MAX_MBSSID_NUM is larger than 8, this parameter need to change.
+}BEACON_SYNC_STRUCT;
+#endif // RT2870 //
typedef struct _MULTISSID_STRUCT {
UCHAR Bssid[MAC_ADDR_LEN];
BOOLEAN NdisRadioStateOff; //For HCT 12.0, set this flag to TRUE instead of called MlmeRadioOff.
ABGBAND_STATE BandState; // For setting BBP used on B/G or A mode.
+#ifdef RT30xx
+ BOOLEAN bRxAntDiversity; // 0:disable, 1:enable Software Rx Antenna Diversity.
+#endif
// IEEE802.11H--DFS.
RADAR_DETECT_STRUCT RadarDetect;
BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled
+#ifdef RT2870
+ BOOLEAN bMultipleIRP; // Multiple Bulk IN flag
+ UCHAR NumOfBulkInIRP; // if bMultipleIRP == TRUE, NumOfBulkInIRP will be 4 otherwise be 1
+ RT_HT_CAPABILITY SupportedHtPhy;
+ ULONG MaxPktOneTxBulk;
+ UCHAR TxBulkFactor;
+ UCHAR RxBulkFactor;
+
+ BEACON_SYNC_STRUCT *pBeaconSync;
+ RALINK_TIMER_STRUCT BeaconUpdateTimer;
+ UINT32 BeaconAdjust;
+ UINT32 BeaconFactor;
+ UINT32 BeaconRemain;
+#endif // RT2870 //
NDIS_SPIN_LOCK MeasureReqTabLock;
BOOLEAN bRadio; // Radio state, And of Sw & Hw radio state
BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled
BOOLEAN bShowHiddenSSID; // Show all known SSID in SSID list get operation
-
+#ifdef RT2860
BOOLEAN AdhocBOnlyJoined; // Indicate Adhoc B Join.
BOOLEAN AdhocBGJoined; // Indicate Adhoc B/G Join.
BOOLEAN Adhoc20NJoined; // Indicate Adhoc 20MHz N Join.
-
+#endif
// New for WPA, windows want us to to keep association information and
// Fixed IEs from last association response
NDIS_802_11_ASSOCIATION_INFORMATION AssocInfo;
RT_HT_PHY_INFO DesiredHtPhyInfo;
BOOLEAN bAutoTxRateSwitch;
+#ifdef RT2860
UCHAR BBPR3;
+#endif
} STA_ADMIN_CONFIG, *PSTA_ADMIN_CONFIG;
// This data structure keep the current active BSS/IBSS's configuration that this STA
RT_HT_CAPABILITY SupportedHtPhy;
} STA_ACTIVE_CONFIG, *PSTA_ACTIVE_CONFIG;
+#ifdef RT2870
+// for USB interface, avoid in interrupt when write key
+typedef struct RT_ADD_PAIRWISE_KEY_ENTRY {
+ NDIS_802_11_MAC_ADDRESS MacAddr;
+ USHORT MacTabMatchWCID; // ASIC
+ CIPHER_KEY CipherKey;
+} RT_ADD_PAIRWISE_KEY_ENTRY,*PRT_ADD_PAIRWISE_KEY_ENTRY;
+#endif // RT2870 //
+
// ----------- start of AP --------------------------
// AUTH-RSP State Machine Aux data structure
typedef struct _AP_MLME_AUX {
UINT32 TXMCSSuccessful[16];
UINT32 TXMCSFailed[16];
UINT32 TXMCSAutoFallBack[16][16];
+#ifdef RT2870
+ ULONG LastBeaconRxTime;
+#endif
} MAC_TABLE_ENTRY, *PMAC_TABLE_ENTRY;
typedef struct _MAC_TABLE {
BOOLEAN fAnyStationInPsm;
BOOLEAN fAnyStationBadAtheros; // Check if any Station is atheros 802.11n Chip. We need to use RTS/CTS with Atheros 802,.11n chip.
BOOLEAN fAnyTxOPForceDisable; // Check if it is necessary to disable BE TxOP
+#ifdef RT2870
+ BOOLEAN fAllStationAsRalink; // Check if all stations are ralink-chipset
+#endif
BOOLEAN fAnyStationIsLegacy; // Check if I use legacy rate to transmit to my BSS Station/
BOOLEAN fAnyStationNonGF; // Check if any Station can't support GF.
BOOLEAN fAnyStation20Only; // Check if any Station can't support GF.
PNET_DEV net_dev;
ULONG VirtualIfCnt;
+#ifdef RT2860
USHORT LnkCtrlBitMask;
USHORT RLnkCtrlConfiguration;
USHORT RLnkCtrlOffset;
RTMP_DMABUF RxDescRing; // Shared memory for RX descriptors
RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; // Shared memory for Tx descriptors
RTMP_TX_RING TxRing[NUM_OF_TX_RING]; // AC0~4 + HCCA
-
+#endif
NDIS_SPIN_LOCK irq_lock;
UCHAR irq_disabled;
+#ifdef RT2870
+/*****************************************************************************************/
+/* USB related parameters */
+/*****************************************************************************************/
+ struct usb_config_descriptor *config;
+ UINT BulkInEpAddr; // bulk-in endpoint address
+ UINT BulkOutEpAddr[6]; // bulk-out endpoint address
+
+ UINT NumberOfPipes;
+ USHORT BulkOutMaxPacketSize;
+ USHORT BulkInMaxPacketSize;
+
+ //======Control Flags
+ LONG PendingIoCount;
+ ULONG BulkFlags;
+ BOOLEAN bUsbTxBulkAggre; // Flags for bulk out data priority
+
+
+ //======Timer Thread
+ RT2870_TIMER_QUEUE TimerQ;
+ NDIS_SPIN_LOCK TimerQLock;
+
+
+ //======Cmd Thread
+ CmdQ CmdQ;
+ NDIS_SPIN_LOCK CmdQLock; // CmdQLock spinlock
+
+ BOOLEAN TimerFunc_kill;
+ BOOLEAN mlme_kill;
+
+
+ //======Semaphores (event)
+ struct semaphore mlme_semaphore; /* to sleep thread on */
+ struct semaphore RTUSBCmd_semaphore; /* to sleep thread on */
+ struct semaphore RTUSBTimer_semaphore;
+ struct completion TimerQComplete;
+ struct completion mlmeComplete;
+ struct completion CmdQComplete;
+ wait_queue_head_t *wait;
+#endif // RT2870 //
/*****************************************************************************************/
BOOLEAN DeQueueRunning[NUM_OF_TX_RING]; // for ensuring RTUSBDeQueuePacket get call once
NDIS_SPIN_LOCK DeQueueLock[NUM_OF_TX_RING];
+#ifdef RT2870
+ // Data related context and AC specified, 4 AC supported
+ NDIS_SPIN_LOCK BulkOutLock[6]; // BulkOut spinlock for 4 ACs
+ NDIS_SPIN_LOCK MLMEBulkOutLock; // MLME BulkOut lock
+
+ HT_TX_CONTEXT TxContext[NUM_OF_TX_RING];
+ NDIS_SPIN_LOCK TxContextQueueLock[NUM_OF_TX_RING]; // TxContextQueue spinlock
+
+ // 4 sets of Bulk Out index and pending flag
+ UCHAR NextBulkOutIndex[4]; // only used for 4 EDCA bulkout pipe
+
+ BOOLEAN BulkOutPending[6]; // used for total 6 bulkout pipe
+ UCHAR bulkResetPipeid;
+ BOOLEAN MgmtBulkPending;
+ ULONG bulkResetReq[6];
+#endif // RT2870 //
// resource for software backlog queues
QUEUE_HEADER TxSwQueue[NUM_OF_TX_RING]; // 4 AC + 1 HCCA
/*****************************************************************************************/
/* Rx related parameters */
/*****************************************************************************************/
-
+#ifdef RT2860
RTMP_RX_RING RxRing;
NDIS_SPIN_LOCK RxRingLock; // Rx Ring spinlock
-
+#endif
+#ifdef RT2870
+ RX_CONTEXT RxContext[RX_RING_SIZE]; // 1 for redundant multiple IRP bulk in.
+ NDIS_SPIN_LOCK BulkInLock; // BulkIn spinlock for 4 ACs
+ UCHAR PendingRx; // The Maxima pending Rx value should be RX_RING_SIZE.
+ UCHAR NextRxBulkInIndex; // Indicate the current RxContext Index which hold by Host controller.
+ UCHAR NextRxBulkInReadIndex; // Indicate the current RxContext Index which driver can read & process it.
+ ULONG NextRxBulkInPosition; // Want to contatenate 2 URB buffer while 1st is bulkin failed URB. This Position is 1st URB TransferLength.
+ ULONG TransferBufferLength; // current length of the packet buffer
+ ULONG ReadPosition; // current read position in a packet buffer
+#endif // RT2870 //
/*****************************************************************************************/
ULONG EepromVersion; // byte 0: version, byte 1: revision, byte 2~3: unused
UCHAR EEPROMAddressNum; // 93c46=6 93c66=8
USHORT EEPROMDefaultValue[NUM_EEPROM_BBP_PARMS];
+#ifdef RT30xx
+ BOOLEAN EepromAccess;
+ UCHAR EFuseTag;
+#endif
ULONG FirmwareVersion; // byte 0: Minor version, byte 1: Major version, otherwise unused.
// ---------------------------
PSPOLL_FRAME PsPollFrame;
HEADER_802_11 NullFrame;
+#ifdef RT2870
+ TX_CONTEXT BeaconContext[BEACON_RING_SIZE];
+ TX_CONTEXT NullContext;
+ TX_CONTEXT PsPollContext;
+ TX_CONTEXT RTSContext;
+#endif // RT2870 //
+
+
+
//=========AP===========
// flags, see fRTMP_ADAPTER_xxx flags
ULONG Flags; // Represent current device status
+#ifdef RT2860
ULONG PSFlags; // Power Save operation flag.
+#endif
// current TX sequence #
USHORT Sequence;
/*****************************************************************************************/
/* Statistic related parameters */
/*****************************************************************************************/
+#ifdef RT2870
+ ULONG BulkOutDataOneSecCount;
+ ULONG BulkInDataOneSecCount;
+ ULONG BulkLastOneSecCount; // BulkOutDataOneSecCount + BulkInDataOneSecCount
+ ULONG watchDogRxCnt;
+ ULONG watchDogRxOverFlowCnt;
+ ULONG watchDogTxPendingCnt[NUM_OF_TX_RING];
+#endif // RT2870 //
BOOLEAN bUpdateBcnCntDone;
ULONG watchDogMacDeadlock; // prevent MAC/BBP into deadlock condition
UINT8 PM_FlgSuspend;
+
+#ifdef RT30xx
+//======efuse
+ BOOLEAN bUseEfuse;
+ BOOLEAN bEEPROMFile;
+#endif // RT30xx //
+
} RTMP_ADAPTER, *PRTMP_ADAPTER;
//
//------------------------------------------------------------------------------------------
-
+#ifdef RT2860
//
// Enable & Disable NIC interrupt via writing interrupt mask register
// Since it use ADAPTER structure, it have to be put after structure definition.
return;
}
+#endif /* RT2860 */
BOOLEAN RTMPCheckForHang(
IN NDIS_HANDLE MiniportAdapterContext
IN NDIS_HANDLE WrapperConfigurationContext
);
+#ifdef RT2870
+VOID NICInitRT30xxRFRegisters(
+ IN PRTMP_ADAPTER pAd);
+#endif // RT2870 //
VOID NICReadEEPROMParameters(
IN PRTMP_ADAPTER pAd,
NDIS_STATUS NICInitializeAsic(
IN PRTMP_ADAPTER pAd,
IN BOOLEAN bHardReset);
-
+#ifdef RT2860
VOID NICRestoreBBPValue(
IN PRTMP_ADAPTER pAd);
-
+#endif
VOID NICIssueReset(
IN PRTMP_ADAPTER pAd);
IN UCHAR QueIdx,
IN PUCHAR pData,
IN UINT Length);
-
+#ifdef RT2870
+NDIS_STATUS MiniportDataMMRequest(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR QueIdx,
+ IN PUCHAR pData,
+ IN UINT Length);
+#endif
VOID RTMPSendNullFrame(
IN PRTMP_ADAPTER pAd,
IN UCHAR TxRate,
VOID AsicForceWakeup(
IN PRTMP_ADAPTER pAd,
+#ifdef RT2860
IN UCHAR Level);
+#endif
+#ifdef RT2870
+ IN BOOLEAN bFromTx);
+#endif
VOID AsicSetBssid(
IN PRTMP_ADAPTER pAd,
IN UCHAR Token,
IN UCHAR Arg0,
IN UCHAR Arg1);
-
+#ifdef RT2860
BOOLEAN AsicCheckCommanOk(
IN PRTMP_ADAPTER pAd,
IN UCHAR Command);
-
+#endif
VOID MacAddrRandomBssid(
IN PRTMP_ADAPTER pAd,
OUT PUCHAR pAddr);
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem);
+#ifdef RT2870
+VOID MlmeCntlConfirm(
+ IN PRTMP_ADAPTER pAd,
+ IN ULONG MsgType,
+ IN USHORT Msg);
+#endif // RT2870 //
VOID ComposePsPoll(
IN PRTMP_ADAPTER pAd);
IN CHAR Rssi1,
IN CHAR Rssi2);
+#ifdef RT30xx
+VOID AsicSetRxAnt(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Ant);
+#endif
+
VOID AsicEvaluateRxAnt(
IN PRTMP_ADAPTER pAd);
IN UCHAR TxRate,
IN BOOLEAN bQosNull);
+#ifdef RT30xx
+VOID RTMPFilterCalibration(
+ IN PRTMP_ADAPTER pAd);
+#endif // RT30xx //
/* timeout -- ms */
VOID RTMP_SetPeriodicTimer(
void tbtt_tasklet(unsigned long data);
+#ifdef RT2860
//
// Function Prototype in cmm_data_2860.c
//
VOID RT28xxPciMlmeRadioOFF(
IN PRTMP_ADAPTER pAd);
+#endif /* RT2860 */
VOID AsicTurnOffRFClk(
IN PRTMP_ADAPTER pAd,
IN PRTMP_ADAPTER pAd,
IN UCHAR Channel);
+#ifdef RT30xx
+NTSTATUS RT30xxWriteRFRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR RegID,
+ IN UCHAR Value);
+
+NTSTATUS RT30xxReadRFRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR RegID,
+ IN PUCHAR pValue);
+
+//2008/09/11:KH add to support efuse<--
+UCHAR eFuseReadRegisters(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ OUT USHORT* pData);
+
+VOID eFuseReadPhysical(
+ IN PRTMP_ADAPTER pAd,
+ IN PUSHORT lpInBuffer,
+ IN ULONG nInBufferSize,
+ OUT PUSHORT lpOutBuffer,
+ IN ULONG nOutBufferSize
+);
+
+NTSTATUS eFuseRead(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ OUT PUCHAR pData,
+ IN USHORT Length);
+
+VOID eFusePhysicalWriteRegisters(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ OUT USHORT* pData);
+
+NTSTATUS eFuseWriteRegisters(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ IN USHORT* pData);
+
+VOID eFuseWritePhysical(
+ IN PRTMP_ADAPTER pAd,
+ PUSHORT lpInBuffer,
+ ULONG nInBufferSize,
+ PUCHAR lpOutBuffer,
+ ULONG nOutBufferSize
+);
+
+NTSTATUS eFuseWrite(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN PUCHAR pData,
+ IN USHORT length);
+
+INT set_eFuseGetFreeBlockCount_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg);
+
+INT set_eFusedump_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg);
+
+INT set_eFuseLoadFromBin_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR arg);
+
+NTSTATUS eFuseWriteRegistersFromBin(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ IN USHORT* pData);
+
+VOID eFusePhysicalReadRegisters(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN USHORT Length,
+ OUT USHORT* pData);
+
+NDIS_STATUS NICLoadEEPROM(
+ IN PRTMP_ADAPTER pAd);
+
+BOOLEAN bNeedLoadEEPROM(
+ IN PRTMP_ADAPTER pAd);
+//2008/09/11:KH add to support efuse-->
+#endif // RT30xx //
+
+#ifdef RT30xx
+// add by johnli, RF power sequence setup
+VOID RT30xxLoadRFNormalModeSetup(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RT30xxLoadRFSleepModeSetup(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RT30xxReverseRFSleepModeSetup(
+ IN PRTMP_ADAPTER pAd);
+// end johnli
+#endif // RT30xx //
+
+#ifdef RT2870
+//
+// Function Prototype in rtusb_bulk.c
+//
+VOID RTUSBInitTxDesc(
+ IN PRTMP_ADAPTER pAd,
+ IN PTX_CONTEXT pTxContext,
+ IN UCHAR BulkOutPipeId,
+ IN usb_complete_t Func);
+
+VOID RTUSBInitHTTxDesc(
+ IN PRTMP_ADAPTER pAd,
+ IN PHT_TX_CONTEXT pTxContext,
+ IN UCHAR BulkOutPipeId,
+ IN ULONG BulkOutSize,
+ IN usb_complete_t Func);
+
+VOID RTUSBInitRxDesc(
+ IN PRTMP_ADAPTER pAd,
+ IN PRX_CONTEXT pRxContext);
+
+VOID RTUSBCleanUpDataBulkOutQueue(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBCancelPendingBulkOutIRP(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBBulkOutDataPacket(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR BulkOutPipeId,
+ IN UCHAR Index);
+
+VOID RTUSBBulkOutNullFrame(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBBulkOutRTSFrame(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBCancelPendingBulkInIRP(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBCancelPendingIRPs(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBBulkOutMLMEPacket(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Index);
+
+VOID RTUSBBulkOutPsPoll(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBCleanUpMLMEBulkOutQueue(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBKickBulkOut(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBBulkReceive(
+ IN PRTMP_ADAPTER pAd);
+
+VOID DoBulkIn(
+ IN RTMP_ADAPTER *pAd);
+
+VOID RTUSBInitRxDesc(
+ IN PRTMP_ADAPTER pAd,
+ IN PRX_CONTEXT pRxContext);
+
+VOID RTUSBBulkRxHandle(
+ IN unsigned long data);
+
+//
+// Function Prototype in rtusb_io.c
+//
+NTSTATUS RTUSBMultiRead(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ OUT PUCHAR pData,
+ IN USHORT length);
+
+NTSTATUS RTUSBMultiWrite(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN PUCHAR pData,
+ IN USHORT length);
+
+NTSTATUS RTUSBMultiWrite_OneByte(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN PUCHAR pData);
+
+NTSTATUS RTUSBReadBBPRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Id,
+ IN PUCHAR pValue);
+
+NTSTATUS RTUSBWriteBBPRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR Id,
+ IN UCHAR Value);
+
+NTSTATUS RTUSBWriteRFRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UINT32 Value);
+
+#ifndef RT30xx
+NTSTATUS RT30xxWriteRFRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR RegID,
+ IN UCHAR Value);
+
+NTSTATUS RT30xxReadRFRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR RegID,
+ IN PUCHAR pValue);
+#endif
+
+NTSTATUS RTUSB_VendorRequest(
+ IN PRTMP_ADAPTER pAd,
+ IN UINT32 TransferFlags,
+ IN UCHAR ReservedBits,
+ IN UCHAR Request,
+ IN USHORT Value,
+ IN USHORT Index,
+ IN PVOID TransferBuffer,
+ IN UINT32 TransferBufferLength);
+
+NTSTATUS RTUSBReadEEPROM(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ OUT PUCHAR pData,
+ IN USHORT length);
+
+NTSTATUS RTUSBWriteEEPROM(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN PUCHAR pData,
+ IN USHORT length);
+
+VOID RTUSBPutToSleep(
+ IN PRTMP_ADAPTER pAd);
+
+NTSTATUS RTUSBWakeUp(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RTUSBInitializeCmdQ(
+ IN PCmdQ cmdq);
+
+NDIS_STATUS RTUSBEnqueueCmdFromNdis(
+ IN PRTMP_ADAPTER pAd,
+ IN NDIS_OID Oid,
+ IN BOOLEAN SetInformation,
+ IN PVOID pInformationBuffer,
+ IN UINT32 InformationBufferLength);
+
+NDIS_STATUS RTUSBEnqueueInternalCmd(
+ IN PRTMP_ADAPTER pAd,
+ IN NDIS_OID Oid,
+ IN PVOID pInformationBuffer,
+ IN UINT32 InformationBufferLength);
+
+VOID RTUSBDequeueCmd(
+ IN PCmdQ cmdq,
+ OUT PCmdQElmt *pcmdqelmt);
+
+INT RTUSBCmdThread(
+ IN OUT PVOID Context);
+
+INT TimerQThread(
+ IN OUT PVOID Context);
+
+RT2870_TIMER_ENTRY *RT2870_TimerQ_Insert(
+ IN RTMP_ADAPTER *pAd,
+ IN RALINK_TIMER_STRUCT *pTimer);
+
+BOOLEAN RT2870_TimerQ_Remove(
+ IN RTMP_ADAPTER *pAd,
+ IN RALINK_TIMER_STRUCT *pTimer);
+
+void RT2870_TimerQ_Exit(
+ IN RTMP_ADAPTER *pAd);
+
+void RT2870_TimerQ_Init(
+ IN RTMP_ADAPTER *pAd);
+
+VOID RT2870_BssBeaconExit(
+ IN RTMP_ADAPTER *pAd);
+
+VOID RT2870_BssBeaconStop(
+ IN RTMP_ADAPTER *pAd);
+
+VOID RT2870_BssBeaconStart(
+ IN RTMP_ADAPTER * pAd);
+
+VOID RT2870_BssBeaconInit(
+ IN RTMP_ADAPTER *pAd);
+
+VOID RT2870_WatchDog(
+ IN RTMP_ADAPTER *pAd);
+
+NTSTATUS RTUSBWriteMACRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ IN UINT32 Value);
+
+NTSTATUS RTUSBReadMACRegister(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT Offset,
+ OUT PUINT32 pValue);
+
+NTSTATUS RTUSBSingleWrite(
+ IN RTMP_ADAPTER *pAd,
+ IN USHORT Offset,
+ IN USHORT Value);
+
+NTSTATUS RTUSBFirmwareRun(
+ IN PRTMP_ADAPTER pAd);
+
+NTSTATUS RTUSBFirmwareWrite(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR pFwImage,
+ IN ULONG FwLen);
+
+NTSTATUS RTUSBFirmwareOpmode(
+ IN PRTMP_ADAPTER pAd,
+ OUT PUINT32 pValue);
+
+NTSTATUS RTUSBVenderReset(
+ IN PRTMP_ADAPTER pAd);
+
+NDIS_STATUS RTUSBSetHardWareRegister(
+ IN PRTMP_ADAPTER pAdapter,
+ IN PVOID pBuf);
+
+NDIS_STATUS RTUSBQueryHardWareRegister(
+ IN PRTMP_ADAPTER pAdapter,
+ IN PVOID pBuf);
+
+VOID CMDHandler(
+ IN PRTMP_ADAPTER pAd);
+
+
+NDIS_STATUS CreateThreads(
+ IN struct net_device *net_dev );
+
+
+VOID MacTableInitialize(
+ IN PRTMP_ADAPTER pAd);
+
+VOID MlmeSetPsm(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT psm);
+
+NDIS_STATUS RTMPWPAAddKeyProc(
+ IN PRTMP_ADAPTER pAd,
+ IN PVOID pBuf);
+
+VOID AsicRxAntEvalAction(
+ IN PRTMP_ADAPTER pAd);
+
+void append_pkt(
+ IN PRTMP_ADAPTER pAd,
+ IN PUCHAR pHeader802_3,
+ IN UINT HdrLen,
+ IN PUCHAR pData,
+ IN ULONG DataSize,
+ OUT PNDIS_PACKET *ppPacket);
+
+UINT deaggregate_AMSDU_announce(
+ IN PRTMP_ADAPTER pAd,
+ PNDIS_PACKET pPacket,
+ IN PUCHAR pData,
+ IN ULONG DataSize);
+
+NDIS_STATUS RTMPCheckRxError(
+ IN PRTMP_ADAPTER pAd,
+ IN PHEADER_802_11 pHeader,
+ IN PRXWI_STRUC pRxWI,
+ IN PRT28XX_RXD_STRUC pRxINFO);
+
+
+VOID RTUSBMlmeHardTransmit(
+ IN PRTMP_ADAPTER pAd,
+ IN PMGMT_STRUC pMgmt);
+
+INT MlmeThread(
+ IN PVOID Context);
+
+//
+// Function Prototype in rtusb_data.c
+//
+NDIS_STATUS RTUSBFreeDescriptorRequest(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR BulkOutPipeId,
+ IN UINT32 NumberRequired);
+
+
+BOOLEAN RTUSBNeedQueueBackForAgg(
+ IN RTMP_ADAPTER *pAd,
+ IN UCHAR BulkOutPipeId);
+
+
+VOID RTMPWriteTxInfo(
+ IN PRTMP_ADAPTER pAd,
+ IN PTXINFO_STRUC pTxInfo,
+ IN USHORT USBDMApktLen,
+ IN BOOLEAN bWiv,
+ IN UCHAR QueueSel,
+ IN UCHAR NextValid,
+ IN UCHAR TxBurst);
+
+//
+// Function Prototype in cmm_data_2870.c
+//
+USHORT RtmpUSB_WriteSubTxResource(
+ IN PRTMP_ADAPTER pAd,
+ IN TX_BLK *pTxBlk,
+ IN BOOLEAN bIsLast,
+ OUT USHORT *FreeNumber);
+
+USHORT RtmpUSB_WriteSingleTxResource(
+ IN PRTMP_ADAPTER pAd,
+ IN TX_BLK *pTxBlk,
+ IN BOOLEAN bIsLast,
+ OUT USHORT *FreeNumber);
+
+USHORT RtmpUSB_WriteFragTxResource(
+ IN PRTMP_ADAPTER pAd,
+ IN TX_BLK *pTxBlk,
+ IN UCHAR fragNum,
+ OUT USHORT *FreeNumber);
+
+USHORT RtmpUSB_WriteMultiTxResource(
+ IN PRTMP_ADAPTER pAd,
+ IN TX_BLK *pTxBlk,
+ IN UCHAR frameNum,
+ OUT USHORT *FreeNumber);
+
+VOID RtmpUSB_FinalWriteTxResource(
+ IN PRTMP_ADAPTER pAd,
+ IN TX_BLK *pTxBlk,
+ IN USHORT totalMPDUSize,
+#ifdef RT2860
+ IN USHORT FirstTxIdx);
+#endif
+ IN USHORT TxIdx);
+
+VOID RtmpUSBDataLastTxIdx(
+ IN PRTMP_ADAPTER pAd,
+ IN UCHAR QueIdx,
+ IN USHORT TxIdx);
+
+VOID RtmpUSBDataKickOut(
+ IN PRTMP_ADAPTER pAd,
+ IN TX_BLK *pTxBlk,
+ IN UCHAR QueIdx);
+
+
+int RtmpUSBMgmtKickOut(
+ IN RTMP_ADAPTER *pAd,
+ IN UCHAR QueIdx,
+ IN PNDIS_PACKET pPacket,
+ IN PUCHAR pSrcBufVA,
+ IN UINT SrcBufLen);
+
+VOID RtmpUSBNullFrameKickOut(
+ IN RTMP_ADAPTER *pAd,
+ IN UCHAR QueIdx,
+ IN UCHAR *pNullFrame,
+ IN UINT32 frameLen);
+
+VOID RT28xxUsbStaAsicForceWakeup(
+ IN PRTMP_ADAPTER pAd,
+ IN BOOLEAN bFromTx);
+
+VOID RT28xxUsbStaAsicSleepThenAutoWakeup(
+ IN PRTMP_ADAPTER pAd,
+ IN USHORT TbttNumToNextWakeUp);
+
+VOID RT28xxUsbMlmeRadioOn(
+ IN PRTMP_ADAPTER pAd);
+
+VOID RT28xxUsbMlmeRadioOFF(
+ IN PRTMP_ADAPTER pAd);
+#endif // RT2870 //
////////////////////////////////////////
VOID AsicStaBbpTuning(
IN PRTMP_ADAPTER pAd);
+#ifdef RT2860
VOID AsicResetFromDMABusy(
IN PRTMP_ADAPTER pAd);
VOID AsicResetPBF(
IN PRTMP_ADAPTER pAd);
+#endif
+#ifdef RT2870
+BOOLEAN StaAddMacTableEntry(
+ IN PRTMP_ADAPTER pAd,
+ IN PMAC_TABLE_ENTRY pEntry,
+ IN UCHAR MaxSupportedRateIn500Kbps,
+ IN HT_CAPABILITY_IE *pHtCapability,
+ IN UCHAR HtCapabilityLen,
+ IN USHORT CapabilityInfo);
+#endif
void RTMP_IndicateMediaState(
IN PRTMP_ADAPTER pAd);
// Entry number for each DMA descriptor ring
//
+#ifdef RT2860
#define TX_RING_SIZE 64 //64
#define MGMT_RING_SIZE 128
#define RX_RING_SIZE 128 //64
#define MAX_DMA_DONE_PROCESS TX_RING_SIZE
#define MAX_TX_DONE_PROCESS TX_RING_SIZE //8
#define LOCAL_TXBUF_SIZE 2
+#endif
+#ifdef RT2870
+#define TX_RING_SIZE 8 // 1
+#define PRIO_RING_SIZE 8
+#define MGMT_RING_SIZE 32 // PRIO_RING_SIZE
+#define RX_RING_SIZE 8
+#define MAX_TX_PROCESS 4
+#define LOCAL_TXBUF_SIZE 2048
+#endif // RT2870 //
#define MAX_RX_PROCESS 128 //64 //32
#define NUM_OF_LOCAL_TXBUF 2
#define MAX_PACKETS_IN_PS_QUEUE 128 //32
#define WMM_NUM_OF_AC 4 /* AC0, AC1, AC2, and AC3 */
-
+#ifdef RT30xx
+//2008/09/11:KH add to support efuse<--
+#define MAX_EEPROM_BIN_FILE_SIZE 1024
+//2008/09/11:KH add to support efuse-->
+#endif
// RxFilter
#define STANORMAL 0x17f97
#define fOP_STATUS_WAKEUP_NOW 0x00008000
#define fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE 0x00020000
+#ifdef RT2860
//
// RTMP_ADAPTER PSFlags : related to advanced power save.
//
// Indicate driver should IMMEDIATELY fo to sleep after receiving AP's beacon in which doesn't indicate unicate nor multicast packets for me
//. This flag is used ONLY in RTMPHandleRxDoneInterrupt routine.
#define fRTMP_PS_GO_TO_SLEEP_NOW 0x00000008
+#endif
#define CCKSETPROTECT 0x1
#define OFDMSETPROTECT 0x2
#define MAX_APCLI_NUM 0
#define MAX_MBSSID_NUM 1
+#if defined(RT2860) || defined(RT30xx)
#ifdef MBSS_SUPPORT
#undef MAX_MBSSID_NUM
#define MAX_MBSSID_NUM (8 - MAX_MESH_NUM - MAX_APCLI_NUM)
#endif // MBSS_SUPPORT //
+#endif
/* sanity check for apidx */
#define MBSS_MR_APIDX_SANITY_CHECK(apidx) \
// For 802.11n D3.03
//#define IE_NEW_EXT_CHA_OFFSET 62 // 802.11n d1. New extension channel offset elemet
#define IE_SECONDARY_CH_OFFSET 62 // 802.11n D3.03 Secondary Channel Offset element
+#ifdef RT2870
+#define IE_WAPI 68 // WAPI information element
+#endif
#define IE_2040_BSS_COEXIST 72 // 802.11n D3.0.3
#define IE_2040_BSS_INTOLERANT_REPORT 73 // 802.11n D3.03
#define IE_OVERLAPBSS_SCAN_PARM 74 // 802.11n D3.03
#define AP_CNTL_STATE_MACHINE 15
#define AP_WPA_STATE_MACHINE 16
+#ifdef RT30xx
+#define WSC_STATE_MACHINE 17
+#define WSC_UPNP_STATE_MACHINE 18
+#endif
+
//
// STA's CONTROL/CONNECT state machine: states, events, total function #
//
#define CNTL_WAIT_AUTH2 7
#define CNTL_WAIT_OID_LIST_SCAN 8
#define CNTL_WAIT_OID_DISASSOC 9
+#ifdef RT2870
+#define CNTL_WAIT_SCAN_FOR_CONNECT 10
+#endif // RT2870 //
#define MT2_ASSOC_CONF 34
#define MT2_AUTH_CONF 35
#define RFIC_2750 4 // 2.4G/5G 1T2R
#define RFIC_3020 5 // 2.4G 1T1R
#define RFIC_2020 6 // 2.4G B/G
+#ifdef RT30xx
+#define RFIC_3021 7 // 2.4G 1T2R
+#define RFIC_3022 8 // 2.4G 2T2R
+#endif
// LED Status.
#define LED_LINK_DOWN 0
#define INT_APCLI 0x0400
#define INT_MESH 0x0500
+// Use bitmap to allow coexist of ATE_TXFRAME and ATE_RXFRAME(i.e.,to support LoopBack mode)
+
// WEP Key TYPE
#define WEP_HEXADECIMAL_TYPE 0
#define WEP_ASCII_TYPE 1
#define MCAST_HTMIX 3
#endif // MCAST_RATE_SPECIFIC //
+#ifdef RT2860
// For AsicRadioOff/AsicRadioOn/AsicForceWakeup function
// This is to indicate from where to call this function.
#define DOT11POWERSAVE 0 // TO do .11 power save sleep
#define RTMP_HALT 2 // Called from Halt handler.
#define GUI_IDLE_POWER_SAVE 3 // Call to sleep before link up with AP
#define FROM_TX 4 // Force wake up from Tx packet.
-
-
+#endif
+#ifdef RT2870
+// For AsicRadioOff/AsicRadioOn function
+#define DOT11POWERSAVE 0
+#define GUIRADIO_OFF 1
+#define RTMP_HALT 2
+#define GUI_IDLE_POWER_SAVE 3
+#endif
// definition for WpaSupport flag
#define WPA_SUPPLICANT_DISABLE 0
0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "radio_on" },
{ SHOW_CFG_VALUE,
IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "show" },
+#if !defined(RT2860) && !defined(RT30xx)
+ { SHOW_ADHOC_ENTRY_INFO,
+ 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, "adhocEntry" },
+#endif
/* --- sub-ioctls relations --- */
#ifdef DBG
{ RTPRIV_IOCTL_MAC,
IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
"mac"},
+#ifdef RT30xx
+{ RTPRIV_IOCTL_RF,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_MASK,
+ "rf"},
+#endif // RT30xx //
{ RTPRIV_IOCTL_E2P,
IW_PRIV_TYPE_CHAR | 1024, IW_PRIV_TYPE_CHAR | 1024,
"e2p"},
IN PUCHAR arg);
#ifdef DBG
+#if !defined(RT2860) && !defined(RT30xx)
VOID RTMPIoctlBBP(
IN PRTMP_ADAPTER pAdapter,
IN struct iwreq *wrq);
+#endif
VOID RTMPIoctlMAC(
IN PRTMP_ADAPTER pAdapter,
VOID RTMPIoctlE2PROM(
IN PRTMP_ADAPTER pAdapter,
IN struct iwreq *wrq);
+
+#ifdef RT30xx
+VOID RTMPIoctlRF(
+ IN PRTMP_ADAPTER pAdapter,
+ IN struct iwreq *wrq);
+#endif // RT30xx //
#endif // DBG //
IN PRTMP_ADAPTER pAdapter,
IN PUCHAR arg);
+#if !defined(RT2860) && !defined(RT30xx)
+INT Show_Adhoc_MacTable_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PCHAR extra);
+#endif
+
static struct {
CHAR *name;
INT (*set_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg);
{"ForceGF", Set_ForceGF_Proc},
{"LongRetry", Set_LongRetryLimit_Proc},
{"ShortRetry", Set_ShortRetryLimit_Proc},
+//2008/09/11:KH add to support efuse<--
+#ifdef RT30xx
+ {"efuseFreeNumber", set_eFuseGetFreeBlockCount_Proc},
+ {"efuseDump", set_eFusedump_Proc},
+ {"efuseLoadFromBin", set_eFuseLoadFromBin_Proc},
+#endif // RT30xx //
+//2008/09/11:KH add to support efuse-->
{NULL,}
};
DBGPRINT(RT_DEBUG_TRACE, ("RTMPAddKey ------>\n"));
+#ifdef RT2860
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
if (RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))
{
RTMPusecDelay(6000);
pAd->bPCIclkOff = FALSE;
}
+#endif
if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)
{
}
}
end:
+#ifdef RT2860
RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
DBGPRINT(RT_DEBUG_INFO, ("<------ RTMPAddKey\n"));
+#endif
return;
}
char *name, char *extra)
{
// PRTMP_ADAPTER pAdapter = dev->ml_priv;
-
+#ifdef RT2860
strncpy(name, "RT2860 Wireless", IFNAMSIZ);
+#endif
+#ifdef RT2870
+ strncpy(name, "RT2870 Wireless", IFNAMSIZ);
+#endif // RT2870 //
return 0;
}
struct iw_freq *freq, char *extra)
{
VIRTUAL_ADAPTER *pVirtualAd = NULL;
+#ifndef RT30xx
PRTMP_ADAPTER pAdapter = NULL;
+#endif
+#ifdef RT30xx
+ PRTMP_ADAPTER pAdapter;
+#endif
UCHAR ch;
ULONG m;
else
{
pVirtualAd = dev->ml_priv;
+#ifndef RT30xx
if (pVirtualAd && pVirtualAd->RtmpDev)
+#endif
pAdapter = pVirtualAd->RtmpDev->ml_priv;
}
struct iw_request_info *info,
__u32 *mode, char *extra)
{
+#ifndef RT30xx
PRTMP_ADAPTER pAdapter = NULL;
VIRTUAL_ADAPTER *pVirtualAd = NULL;
So the net_dev->ml_priv will be NULL in 2rd open */
return -ENETDOWN;
}
+#endif
+#ifdef RT30xx
+ PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
if (ADHOC_ON(pAdapter))
*mode = IW_MODE_ADHOC;
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
+#ifndef RT30xx
PRTMP_ADAPTER pAdapter = NULL;
VIRTUAL_ADAPTER *pVirtualAd = NULL;
+#endif
+#ifdef RT30xx
+ PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
struct iw_range *range = (struct iw_range *) extra;
u16 val;
int i;
+#ifndef RT30xx
if (dev->priv_flags == INT_MAIN)
{
pAdapter = dev->ml_priv;
So the net_dev->ml_priv will be NULL in 2rd open */
return -ENETDOWN;
}
+#endif
DBGPRINT(RT_DEBUG_TRACE ,("===>rt_ioctl_giwrange\n"));
data->length = sizeof(struct iw_range);
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
+#ifndef RT30xx
PRTMP_ADAPTER pAdapter = NULL;
VIRTUAL_ADAPTER *pVirtualAd = NULL;
So the net_dev->ml_priv will be NULL in 2rd open */
return -ENETDOWN;
}
+#endif
+#ifdef RT30xx
+ PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
if (INFRA_ON(pAdapter) || ADHOC_ON(pAdapter))
{
DBGPRINT(RT_DEBUG_TRACE, ("!!! Driver is in Monitor Mode now !!!\n"));
return -EINVAL;
}
-
+#ifdef RT2860
if ((pAdapter->OpMode == OPMODE_STA) && (IDLE_ON(pAdapter))
&& (pAdapter->StaCfg.bRadio == TRUE)
&& (RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_IDLE_RADIO_OFF)))
// Check if still radio off.
else if (pAdapter->bPCIclkOff == TRUE)
return 0;
-
+#endif
if (pAdapter->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_ENABLE)
{
pAdapter->StaCfg.WpaSupplicantScanCount++;
previous_ev = current_ev;
current_ev = iwe_stream_add_event(info, current_ev,end_buf, &iwe, IW_EV_ADDR_LEN);
+#ifdef RT30xx
+ if (current_ev == previous_ev)
+#if WIRELESS_EXT >= 17
+ return -E2BIG;
+#else
+ break;
+#endif
+
+ /*
+ Protocol:
+ it will show scanned AP's WirelessMode .
+ it might be
+ 802.11a
+ 802.11a/n
+ 802.11g/n
+ 802.11b/g/n
+ 802.11g
+ 802.11b/g
+ */
+ memset(&iwe, 0, sizeof(iwe));
+ iwe.cmd = SIOCGIWNAME;
+
+
+ {
+ PBSS_ENTRY pBssEntry=&pAdapter->ScanTab.BssEntry[i];
+ BOOLEAN isGonly=FALSE;
+ int rateCnt=0;
+
+ if (pBssEntry->Channel>14)
+ {
+ if (pBssEntry->HtCapabilityLen!=0)
+ strcpy(iwe.u.name,"802.11a/n");
+ else
+ strcpy(iwe.u.name,"802.11a");
+ }
+ else
+ {
+ /*
+ if one of non B mode rate is set supported rate . it mean G only.
+ */
+ for (rateCnt=0;rateCnt<pBssEntry->SupRateLen;rateCnt++)
+ {
+ /*
+ 6Mbps(140) 9Mbps(146) and >=12Mbps(152) are supported rate , it mean G only.
+ */
+ if (pBssEntry->SupRate[rateCnt]==140 || pBssEntry->SupRate[rateCnt]==146 || pBssEntry->SupRate[rateCnt]>=152)
+ isGonly=TRUE;
+ }
+
+ for (rateCnt=0;rateCnt<pBssEntry->ExtRateLen;rateCnt++)
+ {
+ if (pBssEntry->ExtRate[rateCnt]==140 || pBssEntry->ExtRate[rateCnt]==146 || pBssEntry->ExtRate[rateCnt]>=152)
+ isGonly=TRUE;
+ }
+
+
+ if (pBssEntry->HtCapabilityLen!=0)
+ {
+ if (isGonly==TRUE)
+ strcpy(iwe.u.name,"802.11g/n");
+ else
+ strcpy(iwe.u.name,"802.11b/g/n");
+ }
+ else
+ {
+ if (isGonly==TRUE)
+ strcpy(iwe.u.name,"802.11g");
+ else
+ {
+ if (pBssEntry->SupRateLen==4 && pBssEntry->ExtRateLen==0)
+ strcpy(iwe.u.name,"802.11b");
+ else
+ strcpy(iwe.u.name,"802.11b/g");
+ }
+ }
+ }
+ }
+
+ previous_ev = current_ev;
+ current_ev = iwe_stream_add_event(info, current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+#endif /* RT30xx */
if (current_ev == previous_ev)
#if WIRELESS_EXT >= 17
return -E2BIG;
struct iw_request_info *info,
struct iw_point *data, char *essid)
{
+#ifndef RT30xx
PRTMP_ADAPTER pAdapter = NULL;
VIRTUAL_ADAPTER *pVirtualAd = NULL;
So the net_dev->ml_priv will be NULL in 2rd open */
return -ENETDOWN;
}
+#endif
+#ifdef RT30xx
+ PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
data->flags = 1;
if (MONITOR_ON(pAdapter))
data->length = pAdapter->CommonCfg.SsidLen;
memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
}
+#ifdef RT2870
+ // Add for RT2870
+ else if (pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE)
+ {
+ data->length = pAdapter->CommonCfg.SsidLen;
+ memcpy(essid, pAdapter->CommonCfg.Ssid, pAdapter->CommonCfg.SsidLen);
+ }
+#endif // RT2870 //
else
{//the ANY ssid was specified
data->length = 0;
struct iw_request_info *info,
struct iw_point *data, char *nickname)
{
+#ifndef RT30xx
PRTMP_ADAPTER pAdapter = NULL;
VIRTUAL_ADAPTER *pVirtualAd = NULL;
So the net_dev->ml_priv will be NULL in 2rd open */
return -ENETDOWN;
}
+#endif
+#ifdef RT30xx
+ PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
if (data->length > strlen(pAdapter->nickname) + 1)
data->length = strlen(pAdapter->nickname) + 1;
struct iw_request_info *info,
struct iw_param *rts, char *extra)
{
+#ifndef RT30xx
PRTMP_ADAPTER pAdapter = NULL;
VIRTUAL_ADAPTER *pVirtualAd = NULL;
So the net_dev->ml_priv will be NULL in 2rd open */
return -ENETDOWN;
}
+#endif
+#ifdef RT30xx
+ PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
//check if the interface is down
if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
struct iw_request_info *info,
struct iw_param *frag, char *extra)
{
+#ifndef RT30xx
PRTMP_ADAPTER pAdapter = NULL;
VIRTUAL_ADAPTER *pVirtualAd = NULL;
So the net_dev->ml_priv will be NULL in 2rd open */
return -ENETDOWN;
}
+#endif
+#ifdef RT30xx
+ PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
//check if the interface is down
if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
goto done;
}
+#ifndef RT30xx
else if ((erq->length == 0) &&
(erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN))
+#endif
+#ifdef RT30xx
+ else if (erq->flags & IW_ENCODE_RESTRICTED || erq->flags & IW_ENCODE_OPEN)
+#endif
{
STA_PORT_SECURED(pAdapter);
pAdapter->StaCfg.PairCipher = Ndis802_11WEPEnabled;
pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeShared;
else
pAdapter->StaCfg.AuthMode = Ndis802_11AuthModeOpen;
+#ifndef RT30xx
goto done;
+#endif
}
if (erq->length > 0)
//Using default key
keyIdx = pAdapter->StaCfg.DefaultKeyId;
}
+#ifdef RT30xx
+ else
+ {
+ pAdapter->StaCfg.DefaultKeyId=keyIdx;
+ }
+#endif
NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, 16);
struct iw_request_info *info,
struct iw_point *erq, char *key)
{
+#ifdef RT30xx
+ PRTMP_ADAPTER pAdapter = dev->ml_priv;
+#endif
int kid;
+#ifndef RT30xx
PRTMP_ADAPTER pAdapter = NULL;
VIRTUAL_ADAPTER *pVirtualAd = NULL;
So the net_dev->ml_priv will be NULL in 2rd open */
return -ENETDOWN;
}
+#endif
//check if the interface is down
if(!RTMP_TEST_FLAG(pAdapter, fRTMP_ADAPTER_INTERRUPT_IN_USE))
wrq->length = strlen(extra) + 1; // 1: size of '\0'
break;
case RAIO_ON:
+#ifdef RT2870
+ if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
+ {
+ sprintf(extra, "Scanning\n");
+ wrq->length = strlen(extra) + 1; // 1: size of '\0'
+ break;
+ }
+#endif
pAd->StaCfg.bSwRadio = TRUE;
//if (pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
{
wrq->length = strlen(extra) + 1; // 1: size of '\0'
}
break;
+#if !defined(RT2860) && !defined(RT30xx)
+ case SHOW_ADHOC_ENTRY_INFO:
+ Show_Adhoc_MacTable_Proc(pAd, extra);
+ wrq->length = strlen(extra) + 1; // 1: size of '\0'
+ break;
+#endif
default:
DBGPRINT(RT_DEBUG_TRACE, ("%s - unknow subcmd = %d\n", __func__, subcmd));
break;
IN BOOLEAN bGTK,
IN struct iw_encode_ext *ext)
{
+#ifdef RT2860
RTMP_CLEAR_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP);
if (RTMP_TEST_PSFLAG(pAdapter, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND))
{
RTMPusecDelay(6000);
pAdapter->bPCIclkOff = FALSE;
}
-
+#endif
NdisZeroMemory(&pAdapter->SharedKey[BSS0][keyIdx], sizeof(CIPHER_KEY));
pAdapter->SharedKey[BSS0][keyIdx].KeyLen = LEN_TKIP_EK;
NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, LEN_TKIP_EK);
keyIdx,
pAdapter->SharedKey[BSS0][keyIdx].CipherAlg,
&pAdapter->MacTab.Content[BSSID_WCID]);
-
+#ifdef RT2860
RTMP_SET_PSFLAG(pAdapter, fRTMP_PS_CAN_GO_SLEEP);
+#endif
}
int rt_ioctl_siwencodeext(struct net_device *dev,
NdisZeroMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, 16);
NdisMoveMemory(pAdapter->SharedKey[BSS0][keyIdx].Key, ext->key, ext->key_len);
-
+#ifndef RT30xx
if (pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP40Enabled ||
pAdapter->StaCfg.GroupCipher == Ndis802_11GroupWEP104Enabled)
{
// Indicate Connected for GUI
pAdapter->IndicateMediaState = NdisMediaStateConnected;
}
+#endif
break;
case IW_ENCODE_ALG_TKIP:
DBGPRINT(RT_DEBUG_TRACE, ("%s::IW_ENCODE_ALG_TKIP - keyIdx = %d, ext->key_len = %d\n", __func__, keyIdx, ext->key_len));
DBGPRINT(RT_DEBUG_TRACE, ("this_char=%s, value=%s\n", this_char, value));
if (sscanf(this_char, "%d", &(bbpId)) == 1)
{
+#ifndef RT30xx
if (bbpId <= 136)
+#endif // RT30xx //
+#ifdef RT30xx
+ if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
+#endif // RT30xx //
{
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
{ //Write
if ((sscanf(this_char, "%d", &(bbpId)) == 1) && (sscanf(value, "%x", &(bbpValue)) == 1))
{
+#ifndef RT30xx
if (bbpId <= 136)
+#endif // RT30xx //
+#ifdef RT30xx
+ if (bbpId <= 138) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
+#endif // RT30xx //
{
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAdapter, bbpId, bbpValue);
{
memset(extra, 0x00, IW_PRIV_SIZE_MASK);
sprintf(extra, "\n");
+#ifndef RT30xx
for (bbpId = 0; bbpId <= 136; bbpId++)
+#endif // RT30xx //
+#ifdef RT30xx
+ for (bbpId = 0; bbpId <= 138; bbpId++) // edit by johnli, RF power sequence setup, add BBP R138 for ADC dynamic on/off control
+#endif // RT30xx //
{
if (strlen(extra) >= (IW_PRIV_SIZE_MASK - 10))
break;
RTMP_BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
+#ifndef RT30xx
sprintf(extra+strlen(extra), "R%02d[0x%02X]:%02X ", bbpId, bbpId*2, regBBP);
if (bbpId%5 == 4)
sprintf(extra+strlen(extra), "\n");
+#endif
+#ifdef RT30xx
+ sprintf(extra+strlen(extra), "%03d = %02X\n", bbpId, regBBP); // edit by johnli, change display format
+#endif
}
wrq->length = strlen(extra) + 1; // 1: size of '\0'
{
// allow dynamic change of "USE OFDM rate or not" in ADHOC mode
// if setting changed, need to reset current TX rate as well as BEACON frame format
+#ifdef RT30xx
+ pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
+#endif
if (pAdapter->StaCfg.BssType == BSS_ADHOC)
{
+#ifndef RT30xx
pAdapter->CommonCfg.PhyMode = StaConfig.AdhocMode;
+#endif
RTMPSetPhyMode(pAdapter, PhyMode);
MlmeUpdateTxRates(pAdapter, FALSE, 0);
MakeIbssBeacon(pAdapter); // re-build BEACON frame
pAdapter->Counters8023.RxNoBuffer = 0;
pAdapter->Counters8023.GoodReceives = 0;
pAdapter->Counters8023.RxNoBuffer = 0;
+#ifdef RT2870
+ pAdapter->BulkOutComplete = 0;
+ pAdapter->BulkOutCompleteOther= 0;
+ pAdapter->BulkOutCompleteCancel = 0;
+ pAdapter->BulkOutReq = 0;
+ pAdapter->BulkInReq= 0;
+ pAdapter->BulkInComplete = 0;
+ pAdapter->BulkInCompleteFail = 0;
+#endif // RT2870 //
DBGPRINT(RT_DEBUG_TRACE, ("Set::RT_OID_802_11_RESET_COUNTERS \n"));
break;
case OID_802_11_RTS_THRESHOLD:
pAdapter->StaCfg.DesireSharedKey[KeyIdx].CipherAlg = CipherAlg;
pAdapter->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
}
-
+#ifndef RT30xx
+#ifdef RT2860
if ((pAdapter->StaCfg.WpaSupplicantUP != 0) &&
+#endif
+#ifdef RT2870
+ if ((pAdapter->StaCfg.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
+#endif
(pAdapter->StaCfg.AuthMode >= Ndis802_11AuthModeWPA))
{
Key = pWepKey->KeyMaterial;
pAdapter->IndicateMediaState = NdisMediaStateConnected;
}
else if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
+#endif
+#ifdef RT30xx
+ if (pAdapter->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)
+#endif
{
Key = pAdapter->SharedKey[BSS0][KeyIdx].Key;
Status = -EOPNOTSUPP;
break;
case RT_PRIV_IOCTL:
+#ifdef RT30xx
+ case RT_PRIV_IOCTL_EXT:
+#endif
subcmd = wrq->u.data.flags;
if( subcmd & OID_GET_SET_TOGGLE)
Status = RTMPSetInformation(pAd, rq, subcmd);
case RTPRIV_IOCTL_E2P:
RTMPIoctlE2PROM(pAd, wrq);
break;
+#ifdef RT30xx
+ case RTPRIV_IOCTL_RF:
+ RTMPIoctlRF(pAd, wrq);
+ break;
+#endif // RT30xx //
#endif // DBG //
case SIOCETHTOOL:
break;
bWmmCapable = simple_strtol(arg, 0, 10);
if ((bWmmCapable == 1)
+#ifdef RT2870
+ && (pAd->NumberOfPipes >= 5)
+#endif // RT2870 //
)
pAd->CommonCfg.bWmmCapable = TRUE;
else if (bWmmCapable == 0)
UCHAR temp[16], temp2[16];
UINT32 macValue = 0;
INT Status;
-
+#ifdef RT30xx
+ BOOLEAN bIsPrintAllMAC = FALSE;
+#endif
memset(msg, 0x00, 1024);
if (wrq->u.data.length > 1) //No parameters.
sprintf(msg+strlen(msg), "[0x%08lX]:%08X ", macAddr , macValue);
}
else
+#ifndef RT30xx
{//Invalid parametes, so default printk all bbp
+#endif
+#ifdef RT30xx
+ {//Invalid parametes, so default printk all mac
+ bIsPrintAllMAC = TRUE;
+#endif
goto next;
}
}
}
}
}
+#ifdef RT30xx
+ else
+ bIsPrintAllMAC = TRUE;
+#endif
next:
+#ifdef RT30xx
+ if (bIsPrintAllMAC)
+ {
+ struct file *file_w;
+ PCHAR fileName = "MacDump.txt";
+ mm_segment_t orig_fs;
+
+ orig_fs = get_fs();
+ set_fs(KERNEL_DS);
+
+ // open file
+ file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
+ if (IS_ERR(file_w))
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName));
+ }
+ else
+ {
+ if (file_w->f_op && file_w->f_op->write)
+ {
+ file_w->f_pos = 0;
+ macAddr = 0x1000;
+
+ while (macAddr <= 0x1800)
+ {
+ RTMP_IO_READ32(pAdapter, macAddr, &macValue);
+ sprintf(msg, "%08lx = %08X\n", macAddr, macValue);
+
+ // write data to file
+ file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
+
+ printk("%s", msg);
+ macAddr += 4;
+ }
+ sprintf(msg, "\nDump all MAC values to %s\n", fileName);
+ }
+ filp_close(file_w, NULL);
+ }
+ set_fs(orig_fs);
+ }
+#endif /* RT30xx */
if(strlen(msg) == 1)
sprintf(msg+strlen(msg), "===>Error command format!");
UCHAR temp[16], temp2[16];
USHORT eepValue;
int Status;
-
+#ifdef RT30xx
+ BOOLEAN bIsPrintAllE2P = FALSE;
+#endif
memset(msg, 0x00, 1024);
if (wrq->u.data.length > 1) //No parameters.
}
else
{//Invalid parametes, so default printk all bbp
+#ifdef RT30xx
+ bIsPrintAllE2P = TRUE;
+#endif
goto next;
}
}
sprintf(msg+strlen(msg), "[0x%02X]:%02X ", eepAddr, eepValue);
}
}
+#ifdef RT30xx
+ else
+ bIsPrintAllE2P = TRUE;
+#endif
next:
+#ifdef RT30xx
+ if (bIsPrintAllE2P)
+ {
+ struct file *file_w;
+ PCHAR fileName = "EEPROMDump.txt";
+ mm_segment_t orig_fs;
+
+ orig_fs = get_fs();
+ set_fs(KERNEL_DS);
+
+ // open file
+ file_w = filp_open(fileName, O_WRONLY|O_CREAT, 0);
+ if (IS_ERR(file_w))
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("-->2) %s: Error %ld opening %s\n", __func__, -PTR_ERR(file_w), fileName));
+ }
+ else
+ {
+ if (file_w->f_op && file_w->f_op->write)
+ {
+ file_w->f_pos = 0;
+ eepAddr = 0x00;
+
+ while (eepAddr <= 0xFE)
+ {
+ RT28xx_EEPROM_READ16(pAdapter, eepAddr, eepValue);
+ sprintf(msg, "%08x = %04x\n", eepAddr , eepValue);
+
+ // write data to file
+ file_w->f_op->write(file_w, msg, strlen(msg), &file_w->f_pos);
+
+ printk("%s", msg);
+ eepAddr += 2;
+ }
+ sprintf(msg, "\nDump all EEPROM values to %s\n", fileName);
+ }
+ filp_close(file_w, NULL);
+ }
+ set_fs(orig_fs);
+ }
+#endif /* RT30xx */
if(strlen(msg) == 1)
sprintf(msg+strlen(msg), "===>Error command format!");
DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlE2PROM\n"));
}
+#ifdef RT30xx
+/*
+ ==========================================================================
+ Description:
+ Read / Write RF register
+Arguments:
+ pAdapter Pointer to our adapter
+ wrq Pointer to the ioctl argument
+
+ Return Value:
+ None
+
+ Note:
+ Usage:
+ 1.) iwpriv ra0 rf ==> read all RF registers
+ 2.) iwpriv ra0 rf 1 ==> read RF where RegID=1
+ 3.) iwpriv ra0 rf 1=10 ==> write RF R1=0x10
+ ==========================================================================
+*/
+VOID RTMPIoctlRF(
+ IN PRTMP_ADAPTER pAdapter,
+ IN struct iwreq *wrq)
+{
+ CHAR *this_char;
+ CHAR *value;
+ UCHAR regRF = 0;
+ CHAR msg[2048];
+ CHAR arg[255];
+ INT rfId;
+ LONG rfValue;
+ int Status;
+ BOOLEAN bIsPrintAllRF = FALSE;
+
+
+ memset(msg, 0x00, 2048);
+ if (wrq->u.data.length > 1) //No parameters.
+ {
+ Status = copy_from_user(arg, wrq->u.data.pointer, (wrq->u.data.length > 255) ? 255 : wrq->u.data.length);
+ sprintf(msg, "\n");
+
+ //Parsing Read or Write
+ this_char = arg;
+ if (!*this_char)
+ goto next;
+
+ if ((value = strchr(this_char, '=')) != NULL)
+ *value++ = 0;
+
+ if (!value || !*value)
+ { //Read
+ if (sscanf(this_char, "%d", &(rfId)) == 1)
+ {
+ if (rfId <= 31)
+ {
+ // In RT2860 ATE mode, we do not load 8051 firmware.
+ //We must access RF directly.
+ // For RT2870 ATE mode, ATE_RF_IO_WRITE8(/READ8)_BY_REG_ID are redefined.
+ // according to Andy, Gary, David require.
+ // the command rf shall read rf register directly for dubug.
+ // BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
+ RT30xxReadRFRegister(pAdapter, rfId, ®RF);
+
+ sprintf(msg+strlen(msg), "R%02d[0x%02x]:%02X ", rfId, rfId*2, regRF);
+ }
+ else
+ {//Invalid parametes, so default printk all RF
+ bIsPrintAllRF = TRUE;
+ goto next;
+ }
+ }
+ else
+ { //Invalid parametes, so default printk all RF
+ bIsPrintAllRF = TRUE;
+ goto next;
+ }
+ }
+ else
+ { //Write
+ if ((sscanf(this_char, "%d", &(rfId)) == 1) && (sscanf(value, "%lx", &(rfValue)) == 1))
+ {
+ if (rfId <= 31)
+ {
+ // In RT2860 ATE mode, we do not load 8051 firmware.
+ // We should access RF registers directly.
+ // For RT2870 ATE mode, ATE_RF_IO_WRITE8/READ8_BY_REG_ID are redefined.
+ {
+ // according to Andy, Gary, David require.
+ // the command RF shall read/write RF register directly for dubug.
+ //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
+ //BBP_IO_WRITE8_BY_REG_ID(pAdapter, (UCHAR)bbpId,(UCHAR) bbpValue);
+ RT30xxReadRFRegister(pAdapter, rfId, ®RF);
+ RT30xxWriteRFRegister(pAdapter, (UCHAR)rfId,(UCHAR) rfValue);
+ //Read it back for showing
+ //BBP_IO_READ8_BY_REG_ID(pAdapter, bbpId, ®BBP);
+ RT30xxReadRFRegister(pAdapter, rfId, ®RF);
+ sprintf(msg+strlen(msg), "R%02d[0x%02X]:%02X\n", rfId, rfId*2, regRF);
+ }
+ }
+ else
+ {//Invalid parametes, so default printk all RF
+ bIsPrintAllRF = TRUE;
+ }
+ }
+ else
+ { //Invalid parametes, so default printk all RF
+ bIsPrintAllRF = TRUE;
+ }
+ }
+ }
+ else
+ bIsPrintAllRF = TRUE;
+next:
+ if (bIsPrintAllRF)
+ {
+ memset(msg, 0x00, 2048);
+ sprintf(msg, "\n");
+ for (rfId = 0; rfId <= 31; rfId++)
+ {
+ // according to Andy, Gary, David require.
+ // the command RF shall read/write RF register directly for dubug.
+ RT30xxReadRFRegister(pAdapter, rfId, ®RF);
+ sprintf(msg+strlen(msg), "%03d = %02X\n", rfId, regRF);
+ }
+ // Copy the information into the user buffer
+ DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg)=%d\n", (UINT32)strlen(msg)));
+ wrq->u.data.length = strlen(msg);
+ if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length))
+ {
+ DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__));
+ }
+ }
+ else
+ {
+ if(strlen(msg) == 1)
+ sprintf(msg+strlen(msg), "===>Error command format!");
+
+ DBGPRINT(RT_DEBUG_TRACE, ("copy to user [msg=%s]\n", msg));
+ // Copy the information into the user buffer
+ DBGPRINT(RT_DEBUG_TRACE, ("strlen(msg) =%d\n", (UINT32)strlen(msg)));
+
+ // Copy the information into the user buffer
+ wrq->u.data.length = strlen(msg);
+ Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
+ }
+
+ DBGPRINT(RT_DEBUG_TRACE, ("<==RTMPIoctlRF\n\n"));
+}
+#endif // RT30xx //
#endif // DBG //
DBGPRINT(RT_DEBUG_TRACE, ("IF Set_ShortRetryLimit_Proc::(tx_rty_cfg=0x%x)\n", tx_rty_cfg.word));
return TRUE;
}
+
+#if !defined(RT2860) && !defined(RT30xx)
+INT Show_Adhoc_MacTable_Proc(
+ IN PRTMP_ADAPTER pAd,
+ IN PCHAR extra)
+{
+ INT i;
+
+ sprintf(extra, "\n");
+
+ sprintf(extra + strlen(extra), "HT Operating Mode : %d\n", pAd->CommonCfg.AddHTInfo.AddHtInfo2.OperaionMode);
+
+ sprintf(extra + strlen(extra), "\n%-19s%-4s%-4s%-7s%-7s%-7s%-10s%-6s%-6s%-6s%-6s\n",
+ "MAC", "AID", "BSS", "RSSI0", "RSSI1", "RSSI2", "PhMd", "BW", "MCS", "SGI", "STBC");
+
+ for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
+ {
+ PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i];
+
+ if (strlen(extra) > (IW_PRIV_SIZE_MASK - 30))
+ break;
+ if ((pEntry->ValidAsCLI || pEntry->ValidAsApCli) && (pEntry->Sst == SST_ASSOC))
+ {
+ sprintf(extra + strlen(extra), "%02X:%02X:%02X:%02X:%02X:%02X ",
+ pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2],
+ pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
+ sprintf(extra + strlen(extra), "%-4d", (int)pEntry->Aid);
+ sprintf(extra + strlen(extra), "%-4d", (int)pEntry->apidx);
+ sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi0);
+ sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi1);
+ sprintf(extra + strlen(extra), "%-7d", pEntry->RssiSample.AvgRssi2);
+ sprintf(extra + strlen(extra), "%-10s", GetPhyMode(pEntry->HTPhyMode.field.MODE));
+ sprintf(extra + strlen(extra), "%-6s", GetBW(pEntry->HTPhyMode.field.BW));
+ sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.MCS);
+ sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.ShortGI);
+ sprintf(extra + strlen(extra), "%-6d", pEntry->HTPhyMode.field.STBC);
+ sprintf(extra + strlen(extra), "%-10d, %d, %d%%\n", pEntry->DebugFIFOCount, pEntry->DebugTxCount,
+ (pEntry->DebugTxCount) ? ((pEntry->DebugTxCount-pEntry->DebugFIFOCount)*100/pEntry->DebugTxCount) : 0);
+ sprintf(extra, "%s\n", extra);
+ }
+ }
+
+ return TRUE;
+}
+#endif /* RT2870 */
#define TKIP_AP_RXMICK_OFFSET (TKIP_AP_TXMICK_OFFSET+LEN_TKIP_TXMICK)
#define TKIP_GTK_LENGTH ((LEN_TKIP_EK)+(LEN_TKIP_RXMICK)+(LEN_TKIP_TXMICK))
#define LEN_PTK ((LEN_EAP_KEY)+(LEN_TKIP_KEY))
+#ifndef RT30xx
#define MIN_LEN_OF_GTK 5
+#endif
// RSN IE Length definition
#define MAX_LEN_OF_RSNIE 90
projects / platform / kernel / kernel-mfld-blackbay.git / commitdiff