powerpc/8544ds: add partition table for norflash
authorWang Dongsheng <Dongsheng.Wang@freescale.com>
Wed, 29 Aug 2012 03:00:49 +0000 (11:00 +0800)
committerKumar Gala <galak@kernel.crashing.org>
Wed, 12 Sep 2012 19:57:11 +0000 (14:57 -0500)
create partition table for norflash.

Signed-off-by: Wang Dongsheng <Dongsheng.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
arch/powerpc/boot/dts/mpc8544ds.dts
arch/powerpc/boot/dts/mpc8544ds.dtsi

index e934987..ed38874 100644 (file)
                reg = <0 0 0 0>;        // Filled by U-Boot
        };
 
-       lbc: localbus@e0005000 {
+       board_lbc: lbc: localbus@e0005000 {
                reg = <0 0xe0005000 0 0x1000>;
+
+               ranges = <0x0 0x0 0x0 0xff800000 0x800000>;
        };
 
        board_soc: soc: soc8544@e0000000 {
index 77ebc9f..b219d03 100644 (file)
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+&board_lbc {
+       nor@0,0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "cfi-flash";
+               reg = <0x0 0x0 0x800000>;
+               bank-width = <2>;
+               device-width = <1>;
+
+               partition@0 {
+                       reg = <0x0 0x10000>;
+                       label = "dtb-nor";
+               };
+
+               partition@20000 {
+                       reg = <0x20000 0x30000>;
+                       label = "diagnostic-nor";
+                       read-only;
+               };
+
+               partition@200000 {
+                       reg = <0x200000 0x200000>;
+                       label = "dink-nor";
+                       read-only;
+               };
+
+               partition@400000 {
+                       reg = <0x400000 0x380000>;
+                       label = "kernel-nor";
+               };
+
+               partition@780000 {
+                       reg = <0x780000 0x80000>;
+                       label = "u-boot-nor";
+                       read-only;
+               };
+       };
+};
+
 &board_soc {
        enet0: ethernet@24000 {
                phy-handle = <&phy0>;