e->out_dev = attr.out_dev;
e->route_dev_ifindex = attr.route_dev->ifindex;
- /* It's importent to add the neigh to the hash table before checking
+ /* It's important to add the neigh to the hash table before checking
* the neigh validity state. So if we'll get a notification, in case the
* neigh changes it's validity state, we would find the relevant neigh
* in the hash.
/* Create a separate SQ, so that when the buff pool is disabled, we could
* close this SQ safely and stop receiving CQEs. In other case, e.g., if
* the XDPSQ was used instead, we might run into trouble when the buff pool
- * is disabled and then reenabled, but the SQ continues receiving CQEs
+ * is disabled and then re-enabled, but the SQ continues receiving CQEs
* from the old buff pool.
*/
err = mlx5e_open_xdpsq(c, params, &cparam->xdp_sq, pool, &c->xsksq, true);
#include "en.h"
/* mlx5e global resources should be placed in this file.
- * Global resources are common to all the netdevices crated on the same nic.
+ * Global resources are common to all the netdevices created on the same nic.
*/
void mlx5e_mkey_set_relaxed_ordering(struct mlx5_core_dev *mdev, void *mkc)
*/
refcount_t refcnt;
- /* Save the last reported time offloaded trafic pass over one of the
+ /* Save the last reported time offloaded traffic pass over one of the
* neigh hash entry flows. Use it to periodically update the neigh
* 'used' value and avoid neigh deleting by the kernel.
*/
[MARK_TO_REG] = mark_to_reg_ct,
[LABELS_TO_REG] = labels_to_reg_ct,
[FTEID_TO_REG] = fteid_to_reg_ct,
- /* For NIC rules we store the retore metadata directly
+ /* For NIC rules we store the restore metadata directly
* into reg_b that is passed to SW since we don't
* jump between steering domains.
*/
spec->match_criteria_enable |= MLX5_MATCH_MISC_PARAMETERS_3;
}
}
- /* Currenlty supported only for MPLS over UDP */
+ /* Currently supported only for MPLS over UDP */
if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_MPLS) &&
!netif_is_bareudp(filter_dev)) {
NL_SET_ERR_MSG_MOD(extack,
/**
* mlx5_eswitch_enable - Enable eswitch
* @esw: Pointer to eswitch
- * @num_vfs: Enable eswitch swich for given number of VFs.
+ * @num_vfs: Enable eswitch switch for given number of VFs.
* Caller must pass num_vfs > 0 when enabling eswitch for
* vf vports.
* mlx5_eswitch_enable() returns 0 on success or error code on failure.
static int forward_event(struct notifier_block *, unsigned long, void *);
static struct mlx5_nb events_nbs_ref[] = {
- /* Events to be proccessed by mlx5_core */
+ /* Events to be processed by mlx5_core */
{.nb.notifier_call = any_notifier, .event_type = MLX5_EVENT_TYPE_NOTIFY_ANY },
{.nb.notifier_call = temp_warn, .event_type = MLX5_EVENT_TYPE_TEMP_WARN_EVENT },
{.nb.notifier_call = port_module, .event_type = MLX5_EVENT_TYPE_PORT_MODULE_EVENT },
mutex_lock(&fpga_xfrm->lock);
if (!fpga_xfrm->sa_ctx)
- /* Unbounded xfrm, chane only sw attrs */
+ /* Unbounded xfrm, change only sw attrs */
goto change_sw_xfrm_attrs;
/* copy original hw sa */
acc_level_ns = set_prio_attrs_in_ns(ns, acc_level);
/* If this a prio with chains, and we can jump from one chain
- * (namepsace) to another, so we accumulate the levels
+ * (namespace) to another, so we accumulate the levels
*/
if (prio->node.type == FS_TYPE_PRIO_CHAINS)
acc_level = acc_level_ns;
/* The reset only needs to be issued by one PF. The health buffer is
* shared between all functions, and will be cleared during a reset.
- * Check again to avoid a redundant 2nd reset. If the fatal erros was
+ * Check again to avoid a redundant 2nd reset. If the fatal errors was
* PCI related a reset won't help.
*/
fatal_error = mlx5_health_check_fatal_sensors(dev);
} else {
ptp_event.type = PTP_CLOCK_EXTTS;
}
- /* TODOL clock->ptp can be NULL if ptp_clock_register failes */
+ /* TODOL clock->ptp can be NULL if ptp_clock_register fails */
ptp_clock_event(clock->ptp, &ptp_event);
break;
case PTP_PF_PEROUT:
struct mlx5_vxlan {
struct mlx5_core_dev *mdev;
- /* max_num_ports is usuallly 4, 16 buckets is more than enough */
+ /* max_num_ports is usually 4, 16 buckets is more than enough */
DECLARE_HASHTABLE(htable, 4);
struct mutex sync_lock; /* sync add/del port HW operations */
};
#define MLX5_SFS_PER_CTRL_IRQ 64
#define MLX5_IRQ_CTRL_SF_MAX 8
-/* min num of vectores for SFs to be enabled */
+/* min num of vectors for SFs to be enabled */
#define MLX5_IRQ_VEC_COMP_BASE_SF 2
#define MLX5_EQ_SHARE_IRQ_MAX_COMP (8)
return;
/* There are cases where IRQs still will be in used when we reaching
- * to here. Hence, making sure all the irqs are realeased.
+ * to here. Hence, making sure all the irqs are released.
*/
irq_pools_destroy(table);
pci_free_irq_vectors(dev->pdev);
return;
/* Balances with refcount_set; drop the reference so that new user cmd cannot start
- * and new vhca event handler cannnot run.
+ * and new vhca event handler cannot run.
*/
mlx5_sf_table_put(table);
wait_for_completion(&table->disable_complete);
struct mlx5_mkey_seg {
/* This is a two bit field occupying bits 31-30.
* bit 31 is always 0,
- * bit 30 is zero for regular MRs and 1 (e.g free) for UMRs that do not have tanslation
+ * bit 30 is zero for regular MRs and 1 (e.g free) for UMRs that do not have translation
*/
u8 status;
u8 pcie_control;
/* end: qp staff */
/* start: alloc staff */
- /* protect buffer alocation according to numa node */
+ /* protect buffer allocation according to numa node */
struct mutex alloc_mutex;
int numa_node;
}
/* Async-atomic event notifier used by mlx5 core to forward FW
- * evetns recived from event queue to mlx5 consumers.
+ * evetns received from event queue to mlx5 consumers.
* Optimise event queue dipatching.
*/
int mlx5_notifier_register(struct mlx5_core_dev *dev, struct notifier_block *nb);
projects / platform / kernel / linux-rpi.git / commitdiff