[SCSI] mpt2sas: Fix for hard drive going OFFLINE when hard reset issued and simultane...

Following the host reset, the firmware discovery is reassigning another hard
drive in the topology to the same device handle as that device is getting hot
removed. Until the driver device removal routine is called, there will be two
hard drive with the matching device handle in the internal device link
list. In the device removal routine, a separate function which moves the
device from BLOCKED into OFFLINE state.  Since this routine is passed with the
device handle passed as input parameter, the routine will be traversing the
internal device link list searching for matching device handle. This results
in two devices with matching device handle, therefore both devices goes
OFFLINE.

To fix this issue,the input parameter is changed from device handle to SAS
address, therefore only the device that is hot unplugged will be placed in
OFFLINE state.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index d901d4b..f612d1d 100644 (file)
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2915,7 +2915,7 @@ _scsih_ublock_io_all_device(struct MPT2SAS_ADAPTER *ioc)
  * During device pull we need to appropiately set the sdev state.
  */
 static void
-_scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+_scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
 {
        struct MPT2SAS_DEVICE *sas_device_priv_data;
        struct scsi_device *sdev;
@@ -2926,10 +2926,12 @@ _scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
                        continue;
                if (!sas_device_priv_data->block)
                        continue;
-               if (sas_device_priv_data->sas_target->handle == handle) {
+               if (sas_device_priv_data->sas_target->sas_address ==
+                                                               sas_address) {
                        dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
                            MPT2SAS_INFO_FMT "SDEV_RUNNING: "
-                           "handle(0x%04x)\n", ioc->name, handle));
+                           "sas address(0x%016llx)\n", ioc->name,
+                               (unsigned long long)sas_address));
                        sas_device_priv_data->block = 0;
                        scsi_internal_device_unblock(sdev);
                }
@@ -3137,7 +3139,7 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
                dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: "
                "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle,
                        (unsigned long long)sas_address));
-               _scsih_ublock_io_device(ioc, handle);
+               _scsih_ublock_io_device(ioc, sas_address);
                sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
        }
 
@@ -5185,7 +5187,7 @@ _scsih_check_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
                return;
        }
        spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-       _scsih_ublock_io_device(ioc, handle);
+       _scsih_ublock_io_device(ioc, sas_address);
 
 }
 
@@ -5322,7 +5324,7 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc,
        if (sas_device->starget && sas_device->starget->hostdata) {
                sas_target_priv_data = sas_device->starget->hostdata;
                sas_target_priv_data->deleted = 1;
-               _scsih_ublock_io_device(ioc, sas_device->handle);
+               _scsih_ublock_io_device(ioc, sas_device->sas_address);
                sas_target_priv_data->handle =
                     MPT2SAS_INVALID_DEVICE_HANDLE;
        }
@@ -6998,8 +7000,8 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
        list_for_each_entry_safe(sas_device, sas_device_next,
            &ioc->sas_device_list, list) {
                if (!sas_device->responding)
-                       _scsih_device_remove_by_handle(ioc,
-                           sas_device->handle);
+                       mpt2sas_device_remove_by_sas_address(ioc,
+                               sas_device->sas_address);
                else
                        sas_device->responding = 0;
        }