Basically all the nic_init flow should be in the transport layer.
iwl_prepare_card_hw will move to the transport too in a separate patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
/* the rest are 0 by default */
};
-static void iwlagn_set_pwr_vmain(struct iwl_priv *priv)
-{
-/*
- * (for documentation purposes)
- * to set power to V_AUX, do:
-
- if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
- iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
- */
-
- iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
-}
-
-/*TODO: this function should move to transport layer */
-int iwlagn_hw_nic_init(struct iwl_priv *priv)
-{
- unsigned long flags;
-
- /* nic_init */
- spin_lock_irqsave(&priv->lock, flags);
- iwl_apm_init(priv);
-
- /* Set interrupt coalescing calibration timer to default (512 usecs) */
- iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- iwlagn_set_pwr_vmain(priv);
-
- priv->cfg->lib->nic_config(priv);
-
- /* Allocate the RX queue, or reset if it is already allocated */
- trans_rx_init(priv);
-
- /* Allocate or reset and init all Tx and Command queues */
- if (trans_tx_init(priv))
- return -ENOMEM;
-
- if (priv->cfg->base_params->shadow_reg_enable) {
- /* enable shadow regs in HW */
- iwl_set_bit(priv, CSR_MAC_SHADOW_REG_CTRL,
- 0x800FFFFF);
- }
-
- set_bit(STATUS_INIT, &priv->status);
-
- return 0;
-}
-
int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
{
int idx = 0;
list_del(&wait_entry->list);
spin_unlock_bh(&priv->_agn.notif_wait_lock);
}
-
-int iwlagn_start_device(struct iwl_priv *priv)
-{
- int ret;
-
- priv->ucode_owner = IWL_OWNERSHIP_DRIVER;
-
- if ((priv->cfg->sku & EEPROM_SKU_CAP_AMT_ENABLE) &&
- iwl_prepare_card_hw(priv)) {
- IWL_WARN(priv, "Exit HW not ready\n");
- return -EIO;
- }
-
- /* If platform's RF_KILL switch is NOT set to KILL */
- if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- set_bit(STATUS_RF_KILL_HW, &priv->status);
-
- if (iwl_is_rfkill(priv)) {
- wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
- iwl_enable_interrupts(priv);
- return -ERFKILL;
- }
-
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-
- ret = iwlagn_hw_nic_init(priv);
- if (ret) {
- IWL_ERR(priv, "Unable to init nic\n");
- return ret;
- }
-
- /* make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- /* clear (again), then enable host interrupts */
- iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
- iwl_enable_interrupts(priv);
-
- /* really make sure rfkill handshake bits are cleared */
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- return 0;
-}
-
int ret;
enum iwlagn_ucode_type old_type;
- ret = iwlagn_start_device(priv);
+ ret = trans_start_device(priv);
if (ret)
return ret;
iwl_cancel_deferred_work(priv);
}
-#define HW_READY_TIMEOUT (50)
-
-/* Note: returns poll_bit return value, which is >= 0 if success */
-static int iwl_set_hw_ready(struct iwl_priv *priv)
-{
- int ret;
-
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
-
- /* See if we got it */
- ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
- CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
- HW_READY_TIMEOUT);
-
- IWL_DEBUG_INFO(priv, "hardware%s ready\n", ret < 0 ? " not" : "");
- return ret;
-}
-
-/* Note: returns standard 0/-ERROR code */
-int iwl_prepare_card_hw(struct iwl_priv *priv)
-{
- int ret;
-
- IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
-
- ret = iwl_set_hw_ready(priv);
- if (ret >= 0)
- return 0;
-
- /* If HW is not ready, prepare the conditions to check again */
- iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_PREPARE);
-
- ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
- ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
- CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
-
- if (ret < 0)
- return ret;
-
- /* HW should be ready by now, check again. */
- ret = iwl_set_hw_ready(priv);
- if (ret >= 0)
- return 0;
- return ret;
-}
-
#define MAX_HW_RESTARTS 5
static int __iwl_up(struct iwl_priv *priv)
hdr->data_valid = 1;
}
+/* TODO: this one should be API of the transport layer */
int iwl_prepare_card_hw(struct iwl_priv *priv);
-int iwlagn_start_device(struct iwl_priv *priv);
-
/* tx queue */
-/*TODO: this one should go to transport layer */
void iwl_free_tfds_in_queue(struct iwl_priv *priv,
int sta_id, int tid, int freed);
int iwlagn_send_tx_power(struct iwl_priv *priv);
void iwlagn_temperature(struct iwl_priv *priv);
u16 iwlagn_eeprom_calib_version(struct iwl_priv *priv);
-int iwlagn_hw_nic_init(struct iwl_priv *priv);
int iwlagn_wait_tx_queue_empty(struct iwl_priv *priv);
int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control);
void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control);
/**
* struct iwl_trans_ops - transport specific operations
- * @rx_init: inits the rx memory, allocate it if needed
- * @rx_free: frees the rx memory
- * @tx_init:inits the tx memory, allocate if needed
+ * @start_device: allocates and inits all the resources for the transport
+ * layer.
* @tx_start: starts and configures all the Tx fifo - usually done once the fw
* is alive.
- * @tx_free: frees the tx memory
* @stop_device:stops the whole device (embedded CPU put to reset)
+ * @rx_free: frees the rx memory
+ * @tx_free: frees the tx memory
* @send_cmd:send a host command
* @send_cmd_pdu:send a host command: flags can be CMD_*
* @get_tx_cmd: returns a pointer to a new Tx cmd for the upper layer use
* irq, tasklet etc...
*/
struct iwl_trans_ops {
- int (*rx_init)(struct iwl_priv *priv);
- void (*rx_free)(struct iwl_priv *priv);
- int (*tx_init)(struct iwl_priv *priv);
+ int (*start_device)(struct iwl_priv *priv);
+ void (*stop_device)(struct iwl_priv *priv);
void (*tx_start)(struct iwl_priv *priv);
void (*tx_free)(struct iwl_priv *priv);
-
- void (*stop_device)(struct iwl_priv *priv);
+ void (*rx_free)(struct iwl_priv *priv);
int (*send_cmd)(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
-#include "iwl-sta.h"
#include "iwl-helpers.h"
#include "iwl-trans-int-pcie.h"
-/* TODO:this file should _not_ include the external API header file
- * (iwl-trans.h). This is needed as a W/A until reclaim functions will move to
- * the transport layer */
-#include "iwl-trans.h"
-
/**
* iwl_trans_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
*/
}
/*TODO: this functions should NOT be exported from trans module - export it
- * until the reclaim flow will be brought to the transport module too */
+ * until the reclaim flow will be brought to the transport module too.
+ * Add a declaration to make sparse happy */
+void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
+ struct iwl_tx_queue *txq);
+
void iwlagn_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
struct iwl_tx_queue *txq)
{
iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
}
-static int iwl_trans_rx_init(struct iwl_priv *priv)
+static int iwl_rx_init(struct iwl_priv *priv)
{
struct iwl_rx_queue *rxq = &priv->rxq;
int i, err;
return ret;
}
-static int iwl_trans_tx_init(struct iwl_priv *priv)
+static int iwl_tx_init(struct iwl_priv *priv)
{
int ret;
int txq_id, slots_num;
return ret;
}
+static void iwl_set_pwr_vmain(struct iwl_priv *priv)
+{
+/*
+ * (for documentation purposes)
+ * to set power to V_AUX, do:
+
+ if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
+ iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+ */
+
+ iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+}
+
+static int iwl_nic_init(struct iwl_priv *priv)
+{
+ unsigned long flags;
+
+ /* nic_init */
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl_apm_init(priv);
+
+ /* Set interrupt coalescing calibration timer to default (512 usecs) */
+ iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ iwl_set_pwr_vmain(priv);
+
+ priv->cfg->lib->nic_config(priv);
+
+ /* Allocate the RX queue, or reset if it is already allocated */
+ iwl_rx_init(priv);
+
+ /* Allocate or reset and init all Tx and Command queues */
+ if (iwl_tx_init(priv))
+ return -ENOMEM;
+
+ if (priv->cfg->base_params->shadow_reg_enable) {
+ /* enable shadow regs in HW */
+ iwl_set_bit(priv, CSR_MAC_SHADOW_REG_CTRL,
+ 0x800FFFFF);
+ }
+
+ set_bit(STATUS_INIT, &priv->status);
+
+ return 0;
+}
+
+#define HW_READY_TIMEOUT (50)
+
+/* Note: returns poll_bit return value, which is >= 0 if success */
+static int iwl_set_hw_ready(struct iwl_priv *priv)
+{
+ int ret;
+
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
+
+ /* See if we got it */
+ ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+ HW_READY_TIMEOUT);
+
+ IWL_DEBUG_INFO(priv, "hardware%s ready\n", ret < 0 ? " not" : "");
+ return ret;
+}
+
+/* Note: returns standard 0/-ERROR code */
+int iwl_prepare_card_hw(struct iwl_priv *priv)
+{
+ int ret;
+
+ IWL_DEBUG_INFO(priv, "iwl_prepare_card_hw enter\n");
+
+ ret = iwl_set_hw_ready(priv);
+ if (ret >= 0)
+ return 0;
+
+ /* If HW is not ready, prepare the conditions to check again */
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_PREPARE);
+
+ ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+ ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
+
+ if (ret < 0)
+ return ret;
+
+ /* HW should be ready by now, check again. */
+ ret = iwl_set_hw_ready(priv);
+ if (ret >= 0)
+ return 0;
+ return ret;
+}
+
+static int iwl_trans_start_device(struct iwl_priv *priv)
+{
+ int ret;
+
+ priv->ucode_owner = IWL_OWNERSHIP_DRIVER;
+
+ if ((priv->cfg->sku & EEPROM_SKU_CAP_AMT_ENABLE) &&
+ iwl_prepare_card_hw(priv)) {
+ IWL_WARN(priv, "Exit HW not ready\n");
+ return -EIO;
+ }
+
+ /* If platform's RF_KILL switch is NOT set to KILL */
+ if (iwl_read32(priv, CSR_GP_CNTRL) &
+ CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+ clear_bit(STATUS_RF_KILL_HW, &priv->status);
+ else
+ set_bit(STATUS_RF_KILL_HW, &priv->status);
+
+ if (iwl_is_rfkill(priv)) {
+ wiphy_rfkill_set_hw_state(priv->hw->wiphy, true);
+ iwl_enable_interrupts(priv);
+ return -ERFKILL;
+ }
+
+ iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+
+ ret = iwl_nic_init(priv);
+ if (ret) {
+ IWL_ERR(priv, "Unable to init nic\n");
+ return ret;
+ }
+
+ /* make sure rfkill handshake bits are cleared */
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+ /* clear (again), then enable host interrupts */
+ iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
+ iwl_enable_interrupts(priv);
+
+ /* really make sure rfkill handshake bits are cleared */
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+ return 0;
+}
+
/*
* Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
* must be called under priv->lock and mac access
}
static const struct iwl_trans_ops trans_ops = {
- .rx_init = iwl_trans_rx_init,
- .rx_free = iwl_trans_rx_free,
-
- .tx_init = iwl_trans_tx_init,
+ .start_device = iwl_trans_start_device,
+ .stop_device = iwl_trans_stop_device,
.tx_start = iwl_trans_tx_start,
- .tx_free = iwl_trans_tx_free,
- .stop_device = iwl_trans_stop_device,
+ .rx_free = iwl_trans_rx_free,
+ .tx_free = iwl_trans_tx_free,
.send_cmd = iwl_send_cmd,
.send_cmd_pdu = iwl_send_cmd_pdu,
/*This file includes the declaration that are exported from the transport
* layer */
-static inline int trans_rx_init(struct iwl_priv *priv)
+static inline int trans_start_device(struct iwl_priv *priv)
{
- return priv->trans.ops->rx_init(priv);
+ return priv->trans.ops->start_device(priv);
}
-static inline void trans_rx_free(struct iwl_priv *priv)
-{
- priv->trans.ops->rx_free(priv);
-}
-
-static inline int trans_tx_init(struct iwl_priv *priv)
+static inline void trans_stop_device(struct iwl_priv *priv)
{
- return priv->trans.ops->tx_init(priv);
+ priv->trans.ops->stop_device(priv);
}
static inline void trans_tx_start(struct iwl_priv *priv)
priv->trans.ops->tx_start(priv);
}
-static inline void trans_tx_free(struct iwl_priv *priv)
+static inline void trans_rx_free(struct iwl_priv *priv)
{
- priv->trans.ops->tx_free(priv);
+ priv->trans.ops->rx_free(priv);
}
-static inline void trans_stop_device(struct iwl_priv *priv)
+static inline void trans_tx_free(struct iwl_priv *priv)
{
- priv->trans.ops->stop_device(priv);
+ priv->trans.ops->tx_free(priv);
}
static inline int trans_send_cmd(struct iwl_priv *priv,
projects / platform / kernel / linux-exynos.git / commitdiff