This driver supports the regulators found on the ST-Ericsson mixed
signal AB8500 PMIC
+config REGULATOR_DBX500_PRCMU
+ bool
+
config REGULATOR_DB8500_PRCMU
bool "ST-Ericsson DB8500 Voltage Domain Regulators"
depends on MFD_DB8500_PRCMU
+ select REGULATOR_DBX500_PRCMU
help
This driver supports the voltage domain regulators controlled by the
DB8500 PRCMU
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o
+obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
#include <linux/regulator/machine.h>
#include <linux/regulator/db8500-prcmu.h>
#include <linux/module.h>
-
-/*
- * power state reference count
- */
-static int power_state_active_cnt; /* will initialize to zero */
-static DEFINE_SPINLOCK(power_state_active_lock);
-
-static void power_state_active_enable(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&power_state_active_lock, flags);
- power_state_active_cnt++;
- spin_unlock_irqrestore(&power_state_active_lock, flags);
-}
-
-static int power_state_active_disable(void)
-{
- int ret = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&power_state_active_lock, flags);
- if (power_state_active_cnt <= 0) {
- pr_err("power state: unbalanced enable/disable calls\n");
- ret = -EINVAL;
- goto out;
- }
-
- power_state_active_cnt--;
-out:
- spin_unlock_irqrestore(&power_state_active_lock, flags);
- return ret;
-}
-
-/*
- * Exported interface for CPUIdle only. This function is called when interrupts
- * are turned off. Hence, no locking.
- */
-int power_state_active_is_enabled(void)
-{
- return (power_state_active_cnt > 0);
-}
-
-/**
- * struct db8500_regulator_info - db8500 regulator information
- * @dev: device pointer
- * @desc: regulator description
- * @rdev: regulator device pointer
- * @is_enabled: status of the regulator
- * @epod_id: id for EPOD (power domain)
- * @is_ramret: RAM retention switch for EPOD (power domain)
- * @operating_point: operating point (only for vape, to be removed)
- *
- */
-struct db8500_regulator_info {
- struct device *dev;
- struct regulator_desc desc;
- struct regulator_dev *rdev;
- bool is_enabled;
- u16 epod_id;
- bool is_ramret;
- bool exclude_from_power_state;
- unsigned int operating_point;
-};
+#include "dbx500-prcmu.h"
static int db8500_regulator_enable(struct regulator_dev *rdev)
{
- struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+ struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL)
return -EINVAL;
dev_vdbg(rdev_get_dev(rdev), "regulator-%s-enable\n",
info->desc.name);
- info->is_enabled = true;
- if (!info->exclude_from_power_state)
- power_state_active_enable();
+ if (!info->is_enabled) {
+ info->is_enabled = true;
+ if (!info->exclude_from_power_state)
+ power_state_active_enable();
+ }
return 0;
}
static int db8500_regulator_disable(struct regulator_dev *rdev)
{
- struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+ struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
int ret = 0;
if (info == NULL)
dev_vdbg(rdev_get_dev(rdev), "regulator-%s-disable\n",
info->desc.name);
- info->is_enabled = false;
- if (!info->exclude_from_power_state)
- ret = power_state_active_disable();
+ if (info->is_enabled) {
+ info->is_enabled = false;
+ if (!info->exclude_from_power_state)
+ ret = power_state_active_disable();
+ }
return ret;
}
static int db8500_regulator_is_enabled(struct regulator_dev *rdev)
{
- struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+ struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL)
return -EINVAL;
*/
static int db8500_regulator_switch_enable(struct regulator_dev *rdev)
{
- struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+ struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
if (info == NULL)
static int db8500_regulator_switch_disable(struct regulator_dev *rdev)
{
- struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+ struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
if (info == NULL)
static int db8500_regulator_switch_is_enabled(struct regulator_dev *rdev)
{
- struct db8500_regulator_info *info = rdev_get_drvdata(rdev);
+ struct dbx500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL)
return -EINVAL;
/*
* Regulator information
*/
-static struct db8500_regulator_info
-db8500_regulator_info[DB8500_NUM_REGULATORS] = {
+static struct dbx500_regulator_info
+dbx500_regulator_info[DB8500_NUM_REGULATORS] = {
[DB8500_REGULATOR_VAPE] = {
.desc = {
.name = "db8500-vape",
int i, err;
/* register all regulators */
- for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) {
- struct db8500_regulator_info *info;
+ for (i = 0; i < ARRAY_SIZE(dbx500_regulator_info); i++) {
+ struct dbx500_regulator_info *info;
struct regulator_init_data *init_data = &db8500_init_data[i];
/* assign per-regulator data */
- info = &db8500_regulator_info[i];
+ info = &dbx500_regulator_info[i];
info->dev = &pdev->dev;
/* register with the regulator framework */
/* if failing, unregister all earlier regulators */
while (--i >= 0) {
- info = &db8500_regulator_info[i];
+ info = &dbx500_regulator_info[i];
regulator_unregister(info->rdev);
}
return err;
dev_dbg(rdev_get_dev(info->rdev),
"regulator-%s-probed\n", info->desc.name);
}
+ err = ux500_regulator_debug_init(pdev,
+ dbx500_regulator_info,
+ ARRAY_SIZE(dbx500_regulator_info));
- return 0;
+ return err;
}
static int __exit db8500_regulator_remove(struct platform_device *pdev)
{
int i;
- for (i = 0; i < ARRAY_SIZE(db8500_regulator_info); i++) {
- struct db8500_regulator_info *info;
- info = &db8500_regulator_info[i];
+ ux500_regulator_debug_exit();
+
+ for (i = 0; i < ARRAY_SIZE(dbx500_regulator_info); i++) {
+ struct dbx500_regulator_info *info;
+ info = &dbx500_regulator_info[i];
dev_vdbg(rdev_get_dev(info->rdev),
"regulator-%s-remove\n", info->desc.name);
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * UX500 common part of Power domain regulators
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/regulator/driver.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#include "dbx500-prcmu.h"
+
+/*
+ * power state reference count
+ */
+static int power_state_active_cnt; /* will initialize to zero */
+static DEFINE_SPINLOCK(power_state_active_lock);
+
+int power_state_active_get(void)
+{
+ unsigned long flags;
+ int cnt;
+
+ spin_lock_irqsave(&power_state_active_lock, flags);
+ cnt = power_state_active_cnt;
+ spin_unlock_irqrestore(&power_state_active_lock, flags);
+
+ return cnt;
+}
+
+void power_state_active_enable(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&power_state_active_lock, flags);
+ power_state_active_cnt++;
+ spin_unlock_irqrestore(&power_state_active_lock, flags);
+}
+
+int power_state_active_disable(void)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&power_state_active_lock, flags);
+ if (power_state_active_cnt <= 0) {
+ pr_err("power state: unbalanced enable/disable calls\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ power_state_active_cnt--;
+out:
+ spin_unlock_irqrestore(&power_state_active_lock, flags);
+ return ret;
+}
+
+#ifdef CONFIG_REGULATOR_DEBUG
+
+static struct ux500_regulator_debug {
+ struct dentry *dir;
+ struct dentry *status_file;
+ struct dentry *power_state_cnt_file;
+ struct dbx500_regulator_info *regulator_array;
+ int num_regulators;
+ u8 *state_before_suspend;
+ u8 *state_after_suspend;
+} rdebug;
+
+void ux500_regulator_suspend_debug(void)
+{
+ int i;
+ for (i = 0; i < rdebug.num_regulators; i++)
+ rdebug.state_before_suspend[i] =
+ rdebug.regulator_array[i].is_enabled;
+}
+
+void ux500_regulator_resume_debug(void)
+{
+ int i;
+ for (i = 0; i < rdebug.num_regulators; i++)
+ rdebug.state_after_suspend[i] =
+ rdebug.regulator_array[i].is_enabled;
+}
+
+static int ux500_regulator_power_state_cnt_print(struct seq_file *s, void *p)
+{
+ struct device *dev = s->private;
+ int err;
+
+ /* print power state count */
+ err = seq_printf(s, "ux500-regulator power state count: %i\n",
+ power_state_active_get());
+ if (err < 0)
+ dev_err(dev, "seq_printf overflow\n");
+
+ return 0;
+}
+
+static int ux500_regulator_power_state_cnt_open(struct inode *inode,
+ struct file *file)
+{
+ return single_open(file, ux500_regulator_power_state_cnt_print,
+ inode->i_private);
+}
+
+static const struct file_operations ux500_regulator_power_state_cnt_fops = {
+ .open = ux500_regulator_power_state_cnt_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+static int ux500_regulator_status_print(struct seq_file *s, void *p)
+{
+ struct device *dev = s->private;
+ int err;
+ int i;
+
+ /* print dump header */
+ err = seq_printf(s, "ux500-regulator status:\n");
+ if (err < 0)
+ dev_err(dev, "seq_printf overflow\n");
+
+ err = seq_printf(s, "%31s : %8s : %8s\n", "current",
+ "before", "after");
+ if (err < 0)
+ dev_err(dev, "seq_printf overflow\n");
+
+ for (i = 0; i < rdebug.num_regulators; i++) {
+ struct dbx500_regulator_info *info;
+ /* Access per-regulator data */
+ info = &rdebug.regulator_array[i];
+
+ /* print status */
+ err = seq_printf(s, "%20s : %8s : %8s : %8s\n", info->desc.name,
+ info->is_enabled ? "enabled" : "disabled",
+ rdebug.state_before_suspend[i] ? "enabled" : "disabled",
+ rdebug.state_after_suspend[i] ? "enabled" : "disabled");
+ if (err < 0)
+ dev_err(dev, "seq_printf overflow\n");
+ }
+
+ return 0;
+}
+
+static int ux500_regulator_status_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ux500_regulator_status_print,
+ inode->i_private);
+}
+
+static const struct file_operations ux500_regulator_status_fops = {
+ .open = ux500_regulator_status_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .owner = THIS_MODULE,
+};
+
+int __attribute__((weak)) dbx500_regulator_testcase(
+ struct dbx500_regulator_info *regulator_info,
+ int num_regulators)
+{
+ return 0;
+}
+
+int __devinit
+ux500_regulator_debug_init(struct platform_device *pdev,
+ struct dbx500_regulator_info *regulator_info,
+ int num_regulators)
+{
+ /* create directory */
+ rdebug.dir = debugfs_create_dir("ux500-regulator", NULL);
+ if (!rdebug.dir)
+ goto exit_no_debugfs;
+
+ /* create "status" file */
+ rdebug.status_file = debugfs_create_file("status",
+ S_IRUGO, rdebug.dir, &pdev->dev,
+ &ux500_regulator_status_fops);
+ if (!rdebug.status_file)
+ goto exit_destroy_dir;
+
+ /* create "power-state-count" file */
+ rdebug.power_state_cnt_file = debugfs_create_file("power-state-count",
+ S_IRUGO, rdebug.dir, &pdev->dev,
+ &ux500_regulator_power_state_cnt_fops);
+ if (!rdebug.power_state_cnt_file)
+ goto exit_destroy_status;
+
+ rdebug.regulator_array = regulator_info;
+ rdebug.num_regulators = num_regulators;
+
+ rdebug.state_before_suspend = kzalloc(num_regulators, GFP_KERNEL);
+ if (!rdebug.state_before_suspend) {
+ dev_err(&pdev->dev,
+ "could not allocate memory for saving state\n");
+ goto exit_destroy_power_state;
+ }
+
+ rdebug.state_after_suspend = kzalloc(num_regulators, GFP_KERNEL);
+ if (!rdebug.state_after_suspend) {
+ dev_err(&pdev->dev,
+ "could not allocate memory for saving state\n");
+ goto exit_free;
+ }
+
+ dbx500_regulator_testcase(regulator_info, num_regulators);
+ return 0;
+
+exit_free:
+ kfree(rdebug.state_before_suspend);
+exit_destroy_power_state:
+ debugfs_remove(rdebug.power_state_cnt_file);
+exit_destroy_status:
+ debugfs_remove(rdebug.status_file);
+exit_destroy_dir:
+ debugfs_remove(rdebug.dir);
+exit_no_debugfs:
+ dev_err(&pdev->dev, "failed to create debugfs entries.\n");
+ return -ENOMEM;
+}
+
+int __devexit ux500_regulator_debug_exit(void)
+{
+ debugfs_remove_recursive(rdebug.dir);
+ kfree(rdebug.state_after_suspend);
+ kfree(rdebug.state_before_suspend);
+
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Bengt Jonsson <bengt.jonsson@stericsson.com> for ST-Ericsson,
+ * Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
+ *
+ * License Terms: GNU General Public License v2
+ *
+ */
+
+#ifndef DBX500_REGULATOR_H
+#define DBX500_REGULATOR_H
+
+#include <linux/platform_device.h>
+
+/**
+ * struct dbx500_regulator_info - dbx500 regulator information
+ * @dev: device pointer
+ * @desc: regulator description
+ * @rdev: regulator device pointer
+ * @is_enabled: status of the regulator
+ * @epod_id: id for EPOD (power domain)
+ * @is_ramret: RAM retention switch for EPOD (power domain)
+ * @operating_point: operating point (only for vape, to be removed)
+ *
+ */
+struct dbx500_regulator_info {
+ struct device *dev;
+ struct regulator_desc desc;
+ struct regulator_dev *rdev;
+ bool is_enabled;
+ u16 epod_id;
+ bool is_ramret;
+ bool exclude_from_power_state;
+ unsigned int operating_point;
+};
+
+void power_state_active_enable(void);
+int power_state_active_disable(void);
+
+
+#ifdef CONFIG_REGULATOR_DEBUG
+int ux500_regulator_debug_init(struct platform_device *pdev,
+ struct dbx500_regulator_info *regulator_info,
+ int num_regulators);
+
+int ux500_regulator_debug_exit(void);
+#else
+
+static inline int ux500_regulator_debug_init(struct platform_device *pdev,
+ struct dbx500_regulator_info *regulator_info,
+ int num_regulators)
+{
+ return 0;
+}
+
+static inline int ux500_regulator_debug_exit(void)
+{
+ return 0;
+}
+
+#endif
+#endif
projects / platform / kernel / linux-stable.git / commitdiff