--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2022 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family Device Tree Bindings
+
+maintainers:
+ - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+ - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+ STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
+ quad lanes 800Mbps per lane.
+ Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16.
+ Following part number are supported
+ - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
+ Maximum frame rate is 75 fps.
+ - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
+ Maximum frame rate is 60 fps.
+
+properties:
+ compatible:
+ const: st,st-vgxy61
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ VCORE-supply:
+ description:
+ Sensor digital core supply. Must be 1.2 volts.
+
+ VDDIO-supply:
+ description:
+ Sensor digital IO supply. Must be 1.8 volts.
+
+ VANA-supply:
+ description:
+ Sensor analog supply. Must be 2.8 volts.
+
+ reset-gpios:
+ description:
+ Reference to the GPIO connected to the reset pin, if any.
+ This is an active low signal to the vgxy61.
+
+ st,strobe-gpios-polarity:
+ description:
+ Invert polarity of illuminator's lights strobe GPIOs.
+ These GPIOs directly drive the illuminator LEDs.
+ type: boolean
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description:
+ CSI lanes to use
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ remote-endpoint: true
+
+ required:
+ - data-lanes
+
+required:
+ - compatible
+ - clocks
+ - VCORE-supply
+ - VDDIO-supply
+ - VANA-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ vgxy61: csi2tx@10 {
+ compatible = "st,st-vgxy61";
+ reg = <0x10>;
+ clocks = <&clk_ext_camera>;
+ VCORE-supply = <&v1v2>;
+ VDDIO-supply = <&v1v8>;
+ VANA-supply = <&v2v8>;
+ reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>;
+ port {
+ ep0: endpoint {
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&mipi_csi2_out>;
+ };
+ };
+ };
+ };
+...
F: Documentation/hwmon/stpddc60.rst
F: drivers/hwmon/pmbus/stpddc60.c
+ST VGXY61 DRIVER
+M: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+M: Sylvain Petinot <sylvain.petinot@foss.st.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
+F: Documentation/userspace-api/media/drivers/st-vgxy61.rst
+F: drivers/media/i2c/st-vgxy61.c
+
ST VL53L0X ToF RANGER(I2C) IIO DRIVER
M: Song Qiang <songqiang1304521@gmail.com>
L: linux-iio@vger.kernel.org