Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
+2017-06-28 Maciej W. Rozycki <macro@imgtec.com>
+ Matthew Fortune <matthew.fortune@imgtec.com>
+
+ * archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
+ * cpu-mips.c (I_interaptiv_mr2): New enum value.
+ (arch_info_struct): Add "mips:interaptiv-mr2" entry.
+ * elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
+ case.
+ (mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
+ (bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
+ (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
+ (mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
+ `bfd_mach_mips_interaptiv_mr2' entries.
+ * bfd-in2.h: Regenerate.
+
2017-06-27 Nick Clifton <nickc@redhat.com>
* tekhex.c (pass_over): Revert accidental conversion of a local
.#define bfd_mach_mips_octeon2 6502
.#define bfd_mach_mips_octeon3 6503
.#define bfd_mach_mips_xlr 887682 {* decimal 'XLR' *}
+.#define bfd_mach_mips_interaptiv_mr2 736550 {* decimal 'IA2' *}
.#define bfd_mach_mipsisa32 32
.#define bfd_mach_mipsisa32r2 33
.#define bfd_mach_mipsisa32r3 34
#define bfd_mach_mips_octeon2 6502
#define bfd_mach_mips_octeon3 6503
#define bfd_mach_mips_xlr 887682 /* decimal 'XLR' */
+#define bfd_mach_mips_interaptiv_mr2 736550 /* decimal 'IA2' */
#define bfd_mach_mipsisa32 32
#define bfd_mach_mipsisa32r2 33
#define bfd_mach_mipsisa32r3 34
I_mipsocteon2,
I_mipsocteon3,
I_xlr,
+ I_interaptiv_mr2,
I_micromips
};
N (64, 64, bfd_mach_mips_octeon2,"mips:octeon2", FALSE, NN(I_mipsocteon2)),
N (64, 64, bfd_mach_mips_octeon3, "mips:octeon3", FALSE, NN(I_mipsocteon3)),
N (64, 64, bfd_mach_mips_xlr, "mips:xlr", FALSE, NN(I_xlr)),
+ N (32, 32, bfd_mach_mips_interaptiv_mr2, "mips:interaptiv-mr2", FALSE,
+ NN(I_interaptiv_mr2)),
N (64, 64, bfd_mach_mips_micromips,"mips:micromips",FALSE,0)
};
case E_MIPS_MACH_XLR:
return bfd_mach_mips_xlr;
+ case E_MIPS_MACH_IAMR2:
+ return bfd_mach_mips_interaptiv_mr2;
+
default:
switch (flags & EF_MIPS_ARCH)
{
val = E_MIPS_ARCH_32R2;
break;
+ case bfd_mach_mips_interaptiv_mr2:
+ val = E_MIPS_ARCH_32R2 | E_MIPS_MACH_IAMR2;
+ break;
+
case bfd_mach_mipsisa64r2:
case bfd_mach_mipsisa64r3:
case bfd_mach_mipsisa64r5:
{ bfd_mach_mips4100, bfd_mach_mips4000 },
{ bfd_mach_mips5900, bfd_mach_mips4000 },
+ /* MIPS32r3 extensions. */
+ { bfd_mach_mips_interaptiv_mr2, bfd_mach_mipsisa32r3 },
+
+ /* MIPS32r2 extensions. */
+ { bfd_mach_mipsisa32r3, bfd_mach_mipsisa32r2 },
+
/* MIPS32 extensions. */
{ bfd_mach_mipsisa32r2, bfd_mach_mipsisa32 },
case bfd_mach_mips_octeon3: return AFL_EXT_OCTEON3;
case bfd_mach_mips_octeon2: return AFL_EXT_OCTEON2;
case bfd_mach_mips_xlr: return AFL_EXT_XLR;
+ case bfd_mach_mips_interaptiv_mr2:
+ return AFL_EXT_INTERAPTIV_MR2;
default: return 0;
}
}
case AFL_EXT_LOONGSON_2F:
fputs ("ST Microelectronics Loongson 2F", file);
break;
+ case AFL_EXT_INTERAPTIV_MR2:
+ fputs ("Imagination interAptiv MR2", file);
+ break;
default:
fprintf (file, "%s (%d)", _("Unknown"), isa_ext);
break;
+2017-06-28 Maciej W. Rozycki <macro@imgtec.com>
+ Matthew Fortune <matthew.fortune@imgtec.com>
+
+ * readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
+ (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
+ * NEWS: Mention Imagination interAptiv MR2 processor support.
+
2017-06-26 Nick Clifton <nickc@redhat.com>
PR binutils/21665
-*- text -*-
+* The MIPS port now supports the Imagination interAptiv MR2 processor,
+ which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple
+ of implementation-specific regular MIPS and MIPS16e2 ASE instructions.
+
* The SPARC port now supports the SPARC M8 processor, which implements the
Oracle SPARC Architecture 2017.
case E_MIPS_MACH_OCTEON2: strcat (buf, ", octeon2"); break;
case E_MIPS_MACH_OCTEON3: strcat (buf, ", octeon3"); break;
case E_MIPS_MACH_XLR: strcat (buf, ", xlr"); break;
+ case E_MIPS_MACH_IAMR2: strcat (buf, ", interaptiv-mr2"); break;
case 0:
/* We simply ignore the field in this case to avoid confusion:
MIPS ELF does not specify EF_MIPS_MACH, it is a GNU
case AFL_EXT_LOONGSON_2F:
fputs ("ST Microelectronics Loongson 2F", stdout);
break;
+ case AFL_EXT_INTERAPTIV_MR2:
+ fputs ("Imagination interAptiv MR2", stdout);
+ break;
default:
fprintf (stdout, "%s (%d)", _("Unknown"), isa_ext);
}
+2017-06-28 Maciej W. Rozycki <macro@imgtec.com>
+ Matthew Fortune <matthew.fortune@imgtec.com>
+
+ * config/tc-mips.c (validate_mips_insn): Handle
+ OP_SAVE_RESTORE_LIST specially.
+ (mips_encode_save_restore, mips16_encode_save_restore): New
+ functions.
+ (match_save_restore_list_operand): Factor out SAVE/RESTORE
+ operand insertion into the instruction word or halfword to these
+ new functions.
+ (mips_cpu_info_table): Add "interaptiv-mr2" entry.
+
+ * doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
+ `-march=' argument list.
+
2017-06-27 Maciej W. Rozycki <macro@imgtec.com>
* testsuite/gas/mips/mips16e-save.d: Rename to...
used_bits &= ~(1 << (operand->lsb + 5));
if (operand->type == OP_ENTRY_EXIT_LIST)
used_bits &= ~(mask & 0x700);
+ /* interAptiv MR2 SAVE/RESTORE instructions have a discontiguous
+ operand field that cannot be fully described with LSB/SIZE. */
+ if (operand->type == OP_SAVE_RESTORE_LIST && operand->lsb == 6)
+ used_bits &= ~0x6000;
}
/* Skip prefix characters. */
if (decode_operand && (*s == '+' || *s == 'm' || *s == '-'))
return TRUE;
}
+/* Encode regular MIPS SAVE/RESTORE instruction operands according to
+ the argument register mask AMASK, the number of static registers
+ saved NSREG, the $ra, $s0 and $s1 register specifiers RA, S0 and S1
+ respectively, and the frame size FRAME_SIZE. */
+
+static unsigned int
+mips_encode_save_restore (unsigned int amask, unsigned int nsreg,
+ unsigned int ra, unsigned int s0, unsigned int s1,
+ unsigned int frame_size)
+{
+ return ((nsreg << 23) | ((frame_size & 0xf0) << 15) | (amask << 15)
+ | (ra << 12) | (s0 << 11) | (s1 << 10) | ((frame_size & 0xf) << 6));
+}
+
+/* Encode MIPS16 SAVE/RESTORE instruction operands according to the
+ argument register mask AMASK, the number of static registers saved
+ NSREG, the $ra, $s0 and $s1 register specifiers RA, S0 and S1
+ respectively, and the frame size FRAME_SIZE. */
+
+static unsigned int
+mips16_encode_save_restore (unsigned int amask, unsigned int nsreg,
+ unsigned int ra, unsigned int s0, unsigned int s1,
+ unsigned int frame_size)
+{
+ unsigned int args;
+
+ args = (ra << 6) | (s0 << 5) | (s1 << 4) | (frame_size & 0xf);
+ if (nsreg || amask || frame_size == 0 || frame_size > 16)
+ args |= (MIPS16_EXTEND | (nsreg << 24) | (amask << 16)
+ | ((frame_size & 0xf0) << 16));
+ return args;
+}
+
/* OP_SAVE_RESTORE_LIST matcher. */
static bfd_boolean
{
unsigned int opcode, args, statics, sregs;
unsigned int num_frame_sizes, num_args, num_statics, num_sregs;
+ unsigned int arg_mask, ra, s0, s1;
offsetT frame_size;
opcode = arg->insn->insn_opcode;
args = 0;
statics = 0;
sregs = 0;
+ ra = 0;
+ s0 = 0;
+ s1 = 0;
do
{
unsigned int regno1, regno2;
sregs |= 1 << 8;
else if (regno1 == 31)
/* Add $ra to insn. */
- opcode |= 0x40;
+ ra = 1;
else
return FALSE;
regno1 += 1;
return FALSE;
else if (args == 0xf)
/* All $a0-$a3 are args. */
- opcode |= MIPS16_ALL_ARGS << 16;
+ arg_mask = MIPS_SVRS_ALL_ARGS;
else if (statics == 0xf)
/* All $a0-$a3 are statics. */
- opcode |= MIPS16_ALL_STATICS << 16;
+ arg_mask = MIPS_SVRS_ALL_STATICS;
else
{
/* Count arg registers. */
return FALSE;
/* Encode args/statics. */
- opcode |= ((num_args << 2) | num_statics) << 16;
+ arg_mask = (num_args << 2) | num_statics;
}
/* Encode $s0/$s1. */
if (sregs & (1 << 0)) /* $s0 */
- opcode |= 0x20;
+ s0 = 1;
if (sregs & (1 << 1)) /* $s1 */
- opcode |= 0x10;
+ s1 = 1;
sregs >>= 2;
/* Encode $s2-$s8. */
}
if (sregs != 0)
return FALSE;
- opcode |= num_sregs << 24;
/* Encode frame size. */
if (num_frame_sizes == 0)
set_insn_error (arg->argnum, _("invalid frame size"));
return FALSE;
}
- if (frame_size != 128 || (opcode >> 16) != 0)
- {
- frame_size /= 8;
- opcode |= (((frame_size & 0xf0) << 16)
- | (frame_size & 0x0f));
- }
+ frame_size /= 8;
/* Finally build the instruction. */
- if ((opcode >> 16) != 0 || frame_size == 0)
- opcode |= MIPS16_EXTEND;
+ if (mips_opts.mips16)
+ opcode |= mips16_encode_save_restore (arg_mask, num_sregs, ra, s0, s1,
+ frame_size);
+ else if (!mips_opts.micromips)
+ opcode |= mips_encode_save_restore (arg_mask, num_sregs, ra, s0, s1,
+ frame_size);
+ else
+ abort ();
+
arg->insn->insn_opcode = opcode;
return TRUE;
}
{ "1004kf1_1", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
/* interaptiv is the new name for 1004kf */
{ "interaptiv", 0, ASE_DSP | ASE_MT, ISA_MIPS32R2, CPU_MIPS32R2 },
+ { "interaptiv-mr2", 0,
+ ASE_DSP | ASE_EVA | ASE_MT | ASE_MIPS16E2 | ASE_MIPS16E2_MT,
+ ISA_MIPS32R3, CPU_INTERAPTIV_MR2 },
/* M5100 family */
{ "m5100", 0, ASE_MCU, ISA_MIPS32R5, CPU_MIPS32R5 },
{ "m5101", 0, ASE_MCU, ISA_MIPS32R5, CPU_MIPS32R5 },
1004kf,
1004kf1_1,
interaptiv,
+interaptiv-mr2,
m5100,
m5101,
p5600,
+2017-06-28 Maciej W. Rozycki <macro@imgtec.com>
+ Matthew Fortune <matthew.fortune@imgtec.com>
+
+ * elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
+ (AFL_EXT_INTERAPTIV_MR2): Likewise.
+ * opcode/mips.h: Document new operand codes defined.
+ (INSN_INTERAPTIV_MR2): New macro.
+ (INSN_CHIP_MASK): Adjust accordingly.
+ (CPU_INTERAPTIV_MR2): New macro.
+ (cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
+ (MIPS16_ALL_ARGS): Rename to...
+ (MIPS_SVRS_ALL_ARGS): ... this.
+ (MIPS16_ALL_STATICS): Rename to...
+ (MIPS_SVRS_ALL_STATICS): ... this.
+
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elf/riscv.h (R_RISCV_32_PCREL): New.
#define E_MIPS_MACH_OCTEON3 0x008e0000
#define E_MIPS_MACH_5400 0x00910000
#define E_MIPS_MACH_5900 0x00920000
+#define E_MIPS_MACH_IAMR2 0x00930000
#define E_MIPS_MACH_5500 0x00980000
#define E_MIPS_MACH_9000 0x00990000
#define E_MIPS_MACH_LS2E 0x00A00000
#define AFL_EXT_LOONGSON_2E 17 /* ST Microelectronics Loongson 2E. */
#define AFL_EXT_LOONGSON_2F 18 /* ST Microelectronics Loongson 2F. */
#define AFL_EXT_OCTEON3 19 /* Cavium Networks Octeon3. */
+#define AFL_EXT_INTERAPTIV_MR2 20 /* Imagination interAptiv MR2. */
/* Masks for the flags1 word of an ABI flags structure. */
#define AFL_FLAGS1_ODDSPREG 1 /* Uses odd single-precision registers. */
"+z" 5-bit rz register (OP_*_RZ)
"+Z" 5-bit fz register (OP_*_FZ)
+ interAptiv MR2:
+ "-m" register list for SAVE/RESTORE instruction
+
Enhanced VA Scheme:
"+j" 9-bit signed offset in bit 7 (OP_*_EVAOFFSET)
Extension character sequences used so far ("-" followed by the
following), for quick reference when adding more:
"AB"
- "abdstuvwxy"
+ "abdmstuvwxy"
*/
/* These are the bits which may be set in the pinfo field of an
#undef ISAF
/* Masks used for Chip specific instructions. */
-#define INSN_CHIP_MASK 0xc3ff4f60
+#define INSN_CHIP_MASK 0xc7ff4f60
/* Cavium Networks Octeon instructions. */
#define INSN_OCTEON 0x00000800
#define INSN_LOONGSON_3A 0x00000400
/* RMI Xlr instruction */
#define INSN_XLR 0x00000020
+/* Imagination interAptiv MR2. */
+#define INSN_INTERAPTIV_MR2 0x04000000
/* DSP ASE */
#define ASE_DSP 0x00000001
#define CPU_OCTEON2 6502
#define CPU_OCTEON3 6503
#define CPU_XLR 887682 /* decimal 'XLR' */
+#define CPU_INTERAPTIV_MR2 736550 /* decimal 'IA2' */
/* Return true if the given CPU is included in INSN_* mask MASK. */
case CPU_XLR:
return (mask & INSN_XLR) != 0;
+ case CPU_INTERAPTIV_MR2:
+ return (mask & INSN_INTERAPTIV_MR2) != 0;
+
case CPU_MIPS32R6:
return (mask & INSN_ISA_MASK) == INSN_ISA32R6;
"d" 5-bit EXT size, which becomes MSBD
Requires that "b" occurs first to set position.
Enforces: 0 < (pos+size) <= 32.
+ "n" 2-bit immediate (1 .. 4)
+ "o" 5-bit unsigned immediate * 16
"r" 3-bit register
"s" 3-bit ASMACRO select immediate
"u" 16-bit unsigned immediate
"0123456 89"
".[]<>"
"ABCDEFGHI KLMNOPQRSTUVWXYZ"
- "abcde ijklm pqrs uvwxyz"
+ "abcde ijklmnopqrs uvwxyz"
*/
/* Save/restore encoding for the args field when all 4 registers are
either saved as arguments or saved/restored as statics. */
-#define MIPS16_ALL_ARGS 0xe
-#define MIPS16_ALL_STATICS 0xb
+#define MIPS_SVRS_ALL_ARGS 0xe
+#define MIPS_SVRS_ALL_STATICS 0xb
/* The following flags have the same value for the mips16 opcode
table:
+2017-06-28 Maciej W. Rozycki <macro@imgtec.com>
+ Matthew Fortune <matthew.fortune@imgtec.com>
+ Andrew Bennett <andrew.bennett@imgtec.com>
+
+ * mips-formats.h (INT_BIAS): New macro.
+ (INT_ADJ): Redefine in INT_BIAS terms.
+ * mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
+ (mips_print_save_restore): New function.
+ (print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
+ (validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
+ call.
+ (print_insn_args): Handle OP_SAVE_RESTORE_LIST.
+ (print_mips16_insn_arg): Call `mips_print_save_restore' for
+ OP_SAVE_RESTORE_LIST handling, factored out from here.
+ * mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
+ (RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
+ (mips_builtin_opcodes): Add "restore" and "save" entries.
+ * mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
+ (IAMR2): New macro.
+ (mips16_opcodes): Add "copyw" and "ucopyw" entries.
+
2017-06-23 Andrew Waterman <andrew@sifive.com>
* riscv-opc.c (riscv_opcodes): Mark I-type SLT instruction as an
mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2),
mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 },
+ { "interaptiv-mr2", 1, bfd_mach_mips_interaptiv_mr2, CPU_INTERAPTIV_MR2,
+ ISA_MIPS32R3,
+ ASE_MT | ASE_EVA | ASE_DSP | ASE_DSPR2 | ASE_MIPS16E2 | ASE_MIPS16E2_MT,
+ mips_cp0_names_mips3264r2,
+ mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2),
+ mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 },
+
{ "sb1", 1, bfd_mach_mips_sb1, CPU_SB1,
ISA_MIPS64 | INSN_SB1, ASE_MIPS3D,
mips_cp0_names_sb1,
}
}
+/* Print SAVE/RESTORE instruction operands according to the argument
+ register mask AMASK, the number of static registers saved NSREG,
+ the $ra, $s0 and $s1 register specifiers RA, S0 and S1 respectively,
+ and the frame size FRAME_SIZE. */
+
+static void
+mips_print_save_restore (struct disassemble_info *info, unsigned int amask,
+ unsigned int nsreg, unsigned int ra,
+ unsigned int s0, unsigned int s1,
+ unsigned int frame_size)
+{
+ const fprintf_ftype infprintf = info->fprintf_func;
+ unsigned int nargs, nstatics, smask, i, j;
+ void *is = info->stream;
+ const char *sep;
+
+ if (amask == MIPS_SVRS_ALL_ARGS)
+ {
+ nargs = 4;
+ nstatics = 0;
+ }
+ else if (amask == MIPS_SVRS_ALL_STATICS)
+ {
+ nargs = 0;
+ nstatics = 4;
+ }
+ else
+ {
+ nargs = amask >> 2;
+ nstatics = amask & 3;
+ }
+
+ sep = "";
+ if (nargs > 0)
+ {
+ infprintf (is, "%s", mips_gpr_names[4]);
+ if (nargs > 1)
+ infprintf (is, "-%s", mips_gpr_names[4 + nargs - 1]);
+ sep = ",";
+ }
+
+ infprintf (is, "%s%d", sep, frame_size);
+
+ if (ra) /* $ra */
+ infprintf (is, ",%s", mips_gpr_names[31]);
+
+ smask = 0;
+ if (s0) /* $s0 */
+ smask |= 1 << 0;
+ if (s1) /* $s1 */
+ smask |= 1 << 1;
+ if (nsreg > 0) /* $s2-$s8 */
+ smask |= ((1 << nsreg) - 1) << 2;
+
+ for (i = 0; i < 9; i++)
+ if (smask & (1 << i))
+ {
+ infprintf (is, ",%s", mips_gpr_names[i == 8 ? 30 : (16 + i)]);
+ /* Skip over string of set bits. */
+ for (j = i; smask & (2 << j); j++)
+ continue;
+ if (j > i)
+ infprintf (is, "-%s", mips_gpr_names[j == 8 ? 30 : (16 + j)]);
+ i = j + 1;
+ }
+ /* Statics $ax - $a3. */
+ if (nstatics == 1)
+ infprintf (is, ",%s", mips_gpr_names[7]);
+ else if (nstatics > 0)
+ infprintf (is, ",%s-%s",
+ mips_gpr_names[7 - nstatics + 1],
+ mips_gpr_names[7]);
+}
+
+
/* Print operand OPERAND of OPCODE, using STATE to track inter-operand state.
UVAL is the encoding of the operand (shifted into bit 0) and BASE_PC is
the base address for OP_PCREL operands. */
break;
case OP_SAVE_RESTORE_LIST:
- /* Should be handled by the caller due to extend behavior. */
+ /* Should be handled by the caller due to complex behavior. */
abort ();
case OP_MDMX_IMM_REG:
case OP_VU0_MATCH_SUFFIX:
case OP_IMM_INDEX:
case OP_REG_INDEX:
- break;
-
case OP_SAVE_RESTORE_LIST:
- /* Should be handled by the caller due to extend behavior. */
- abort ();
+ break;
}
}
if (*s == 'm' || *s == '+' || *s == '-')
opcode->name, opcode->args);
return;
}
- if (operand->type == OP_REG
- && s[1] == ','
- && s[2] == 'H'
- && opcode->name[strlen (opcode->name) - 1] == '0')
+
+ if (operand->type == OP_SAVE_RESTORE_LIST)
+ {
+ /* Handle this case here because of the complex behavior. */
+ unsigned int amask = (insn >> 15) & 0xf;
+ unsigned int nsreg = (insn >> 23) & 0x7;
+ unsigned int ra = insn & 0x1000; /* $ra */
+ unsigned int s0 = insn & 0x800; /* $s0 */
+ unsigned int s1 = insn & 0x400; /* $s1 */
+ unsigned int frame_size = (((insn >> 15) & 0xf0)
+ | ((insn >> 6) & 0x0f)) * 8;
+ mips_print_save_restore (info, amask, nsreg, ra, s0, s1,
+ frame_size);
+ }
+ else if (operand->type == OP_REG
+ && s[1] == ','
+ && s[2] == 'H'
+ && opcode->name[strlen (opcode->name) - 1] == '0')
{
/* Coprocessor register 0 with sel field. */
const struct mips_cp0sel_name *n;
{
/* Handle this case here because of the complex interaction
with the EXTEND opcode. */
- unsigned int amask, nargs, nstatics, nsreg, smask, frame_size, i, j;
- const char *sep;
-
- amask = extend & 0xf;
- if (amask == MIPS16_ALL_ARGS)
- {
- nargs = 4;
- nstatics = 0;
- }
- else if (amask == MIPS16_ALL_STATICS)
- {
- nargs = 0;
- nstatics = 4;
- }
- else
- {
- nargs = amask >> 2;
- nstatics = amask & 3;
- }
-
- sep = "";
- if (nargs > 0)
- {
- infprintf (is, "%s", mips_gpr_names[4]);
- if (nargs > 1)
- infprintf (is, "-%s", mips_gpr_names[4 + nargs - 1]);
- sep = ",";
- }
-
- frame_size = ((extend & 0xf0) | (insn & 0x0f)) * 8;
+ unsigned int amask = extend & 0xf;
+ unsigned int nsreg = (extend >> 8) & 0x7;
+ unsigned int ra = insn & 0x40; /* $ra */
+ unsigned int s0 = insn & 0x20; /* $s0 */
+ unsigned int s1 = insn & 0x10; /* $s1 */
+ unsigned int frame_size = ((extend & 0xf0) | (insn & 0x0f)) * 8;
if (frame_size == 0 && !use_extend)
frame_size = 128;
- infprintf (is, "%s%d", sep, frame_size);
-
- if (insn & 0x40) /* $ra */
- infprintf (is, ",%s", mips_gpr_names[31]);
-
- nsreg = (extend >> 8) & 0x7;
- smask = 0;
- if (insn & 0x20) /* $s0 */
- smask |= 1 << 0;
- if (insn & 0x10) /* $s1 */
- smask |= 1 << 1;
- if (nsreg > 0) /* $s2-$s8 */
- smask |= ((1 << nsreg) - 1) << 2;
-
- for (i = 0; i < 9; i++)
- if (smask & (1 << i))
- {
- infprintf (is, ",%s", mips_gpr_names[i == 8 ? 30 : (16 + i)]);
- /* Skip over string of set bits. */
- for (j = i; smask & (2 << j); j++)
- continue;
- if (j > i)
- infprintf (is, "-%s", mips_gpr_names[j == 8 ? 30 : (16 + j)]);
- i = j + 1;
- }
- /* Statics $ax - $a3. */
- if (nstatics == 1)
- infprintf (is, ",%s", mips_gpr_names[7]);
- else if (nstatics > 0)
- infprintf (is, ",%s-%s",
- mips_gpr_names[7 - nstatics + 1],
- mips_gpr_names[7]);
+ mips_print_save_restore (info, amask, nsreg, ra, s0, s1, frame_size);
break;
}
/* For ARRAY_SIZE. */
#include "libiberty.h"
-#define INT_ADJ(SIZE, LSB, MAX_VAL, SHIFT, PRINT_HEX) \
+#define INT_BIAS(SIZE, LSB, MAX_VAL, BIAS, SHIFT, PRINT_HEX) \
{ \
static const struct mips_int_operand op = { \
- { OP_INT, SIZE, LSB }, MAX_VAL, 0, SHIFT, PRINT_HEX \
+ { OP_INT, SIZE, LSB }, MAX_VAL, BIAS, SHIFT, PRINT_HEX \
}; \
return &op.root; \
}
+#define INT_ADJ(SIZE, LSB, MAX_VAL, SHIFT, PRINT_HEX) \
+ INT_BIAS(SIZE, LSB, MAX_VAL, 0, SHIFT, PRINT_HEX)
+
#define UINT(SIZE, LSB) \
INT_ADJ(SIZE, LSB, (1 << (SIZE)) - 1, 0, FALSE)
case 'a': INT_ADJ (19, 0, 262143, 2, FALSE);
case 'b': INT_ADJ (18, 0, 131071, 3, FALSE);
case 'd': SPECIAL (0, 0, REPEAT_DEST_REG);
+ case 'm': SPECIAL (20, 6, SAVE_RESTORE_LIST);
case 's': SPECIAL (5, 21, NON_ZERO_REG);
case 't': SPECIAL (5, 16, NON_ZERO_REG);
case 'u': PREV_CHECK (5, 16, TRUE, FALSE, FALSE, FALSE);
#define RD_2 INSN_READ_2
#define RD_3 INSN_READ_3
#define RD_4 INSN_READ_4
+#define RD_31 INSN2_READ_GPR_31
#define MOD_1 (WR_1|RD_1)
#define MOD_2 (WR_2|RD_2)
#define RD_HILO RD_HI|RD_LO
#define MOD_HILO WR_HILO|RD_HILO
+#define RD_SP INSN2_READ_SP
+#define WR_SP INSN2_WRITE_SP
+#define MOD_SP (RD_SP|WR_SP)
+
#define IS_M INSN_MULT
#define WR_MACC INSN2_WRITE_MDMX_ACC
#define IOCT2 (INSN_OCTEON2 | INSN_OCTEON3)
#define IOCT3 INSN_OCTEON3
#define XLR INSN_XLR
+#define IAMR2 INSN_INTERAPTIV_MR2
#define IVIRT ASE_VIRT
#define IVIRT64 ASE_VIRT64
{"cfcmsa", "+k,+n", 0x787e0019, 0xffff003f, WR_1|CM, 0, 0, MSA, 0 },
{"move.v", "+d,+e", 0x78be0019, 0xffff003f, WR_1|RD_2, 0, 0, MSA, 0 },
+/* interAptiv MR2 instruction extensions. */
+{"restore", "-m", 0x7000001f, 0xfc00603f, WR_31|NODS, MOD_SP, IAMR2, 0, 0 },
+{"save", "-m", 0x7000201f, 0xfc00603f, NODS, RD_31|MOD_SP, IAMR2, 0, 0 },
+
/* User Defined Instruction. */
{"udi0", "s,t,d,+1", 0x70000010, 0xfc00003f, UDI, 0, I33, 0, 0 },
{"udi0", "s,t,+2", 0x70000010, 0xfc00003f, UDI, 0, I33, 0, 0 },
case 'i': JALX (26, 0, 2);
case 'l': SPECIAL (6, 5, ENTRY_EXIT_LIST);
case 'm': SPECIAL (7, 0, SAVE_RESTORE_LIST);
+ case 'n': INT_BIAS (2, 0, 3, 1, 0, FALSE); /* (1 .. 4) */
+ case 'o': INT_ADJ (5, 16, 31, 4, FALSE); /* (0 .. 31) << 4 */
case 'r': MAPPED_REG (3, 16, GP, reg_m16_map);
case 's': HINT (3, 24);
case 'u': HINT (16, 0);
#define I32 INSN_ISA32
#define I64 INSN_ISA64
#define T3 INSN_3900
+#define IAMR2 INSN_INTERAPTIV_MR2
#define E2 ASE_MIPS16E2
#define E2MT ASE_MIPS16E2_MT
{"evpe", "", 0xf0276700, 0xffffffff, WR_C0, 0, 0, E2MT, 0 },
{"evpe", ".", 0xf0276700, 0xffffffff, WR_C0, 0, 0, E2MT, 0 },
{"evpe", "y", 0xf0236700, 0xffffff1f, WR_1|WR_C0, 0, 0, E2MT, 0 },
+ /* interAptiv MR2 instruction extensions. */
+{"copyw", "x,y,o,n", 0xf020e000, 0xffe0f81c, RD_1|RD_2|NODS, 0, IAMR2, 0, 0 },
+{"ucopyw", "x,y,o,n", 0xf000e000, 0xffe0f81c, RD_1|RD_2|NODS, 0, IAMR2, 0, 0 },
/* Place asmacro at the bottom so that it catches any implementation
specific macros that didn't match anything. */
{"asmacro", "s,0,1,2,3,4", 0xf000e000, 0xf800f800, 0, 0, I32, 0, 0 },
projects / external / binutils.git / commitdiff