--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2017-2019 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef __CONFIG_SOCFPGA_SOC64_COMMON_H__
+#define __CONFIG_SOCFPGA_SOC64_COMMON_H__
+
+#include <asm/arch/base_addr_s10.h>
+#include <asm/arch/handoff_s10.h>
+
+/*
+ * U-Boot general configurations
+ */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_LOADADDR 0x2000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_REMAKE_ELF
+/* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */
+#define CPU_RELEASE_ADDR 0xFFD12210
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_SYS_MEM_RESERVE_SECURE 0 /* using OCRAM, not DDR */
+
+/*
+ * U-Boot console configurations
+ */
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_CBSIZE 2048
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+/* Extend size of kernel image for uncompression */
+#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024)
+
+/*
+ * U-Boot run time memory configurations
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x40000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR \
+ + CONFIG_SYS_INIT_RAM_SIZE \
+ - S10_HANDOFF_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_SP_ADDR)
+#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
+
+/*
+ * U-Boot environment configurations
+ */
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
+
+/*
+ * QSPI support
+ */
+ #ifdef CONFIG_CADENCE_QSPI
+/* Enable it if you want to use dual-stacked mode */
+/*#define CONFIG_QSPI_RBF_ADDR 0x720000*/
+
+/* Flash device info */
+
+/*#define CONFIG_ENV_IS_IN_SPI_FLASH*/
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nor0=ff705000.spi.0"
+#endif /* CONFIG_SPL_BUILD */
+
+#ifndef __ASSEMBLY__
+unsigned int cm_get_qspi_controller_clk_hz(void);
+#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz()
+#endif
+
+#endif /* CONFIG_CADENCE_QSPI */
+
+/*
+ * Boot arguments passed to the boot command. The value of
+ * CONFIG_BOOTARGS goes into the environment value "bootargs".
+ * Do note the value will override also the chosen node in FDT blob.
+ */
+#define CONFIG_BOOTARGS "earlycon"
+#define CONFIG_BOOTCOMMAND "run fatscript; run mmcload;run linux_qspi_enable;" \
+ "run mmcboot"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "bootfile=Image\0" \
+ "fdt_addr=8000000\0" \
+ "fdtimage=socfpga_stratix10_socdk.dtb\0" \
+ "mmcroot=/dev/mmcblk0p2\0" \
+ "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
+ " root=${mmcroot} rw rootwait;" \
+ "booti ${loadaddr} - ${fdt_addr}\0" \
+ "mmcload=mmc rescan;" \
+ "load mmc 0:1 ${loadaddr} ${bootfile};" \
+ "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
+ "linux_qspi_enable=if sf probe; then " \
+ "echo Enabling QSPI at Linux DTB...;" \
+ "fdt addr ${fdt_addr}; fdt resize;" \
+ "fdt set /soc/spi@ff8d2000 status okay;" \
+ "fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency " \
+ " ${qspi_clock}; fi; \0" \
+ "scriptaddr=0x02100000\0" \
+ "scriptfile=u-boot.scr\0" \
+ "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \
+ "then source ${scriptaddr}; fi\0" \
+ "socfpga_legacy_reset_compat=1\0"
+
+/*
+ * Generic Interrupt Controller Definitions
+ */
+#define CONFIG_GICV2
+
+/*
+ * External memory configurations
+ */
+#define PHYS_SDRAM_1 0x0
+#define PHYS_SDRAM_1_SIZE (1 * 1024 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_MEMTEST_START 0
+#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE - 0x200000
+
+/*
+ * Serial / UART configurations
+ */
+#define CONFIG_SYS_NS16550_CLK 100000000
+#define CONFIG_SYS_NS16550_MEM32
+
+/*
+ * Timer & watchdog configurations
+ */
+#define COUNTER_FREQUENCY 400000000
+
+/*
+ * SDMMC configurations
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256
+#endif
+/*
+ * Flash configurations
+ */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+
+/* Ethernet on SoC (EMAC) */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_DW_ALTDESCRIPTOR
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * L4 Watchdog
+ */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_DESIGNWARE_WATCHDOG
+#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
+#ifndef __ASSEMBLY__
+unsigned int cm_get_l4_sys_free_clk_hz(void);
+#define CONFIG_DW_WDT_CLOCK_KHZ (cm_get_l4_sys_free_clk_hz() / 1000)
+#endif
+#endif
+
+/*
+ * SPL memory layout
+ *
+ * On chip RAM
+ * 0xFFE0_0000 ...... Start of OCRAM
+ * SPL code, rwdata
+ * empty space
+ * 0xFFEx_xxxx ...... Top of stack (grows down)
+ * 0xFFEy_yyyy ...... Global Data
+ * 0xFFEz_zzzz ...... Malloc prior relocation (size CONFIG_SYS_MALLOC_F_LEN)
+ * 0xFFE3_F000 ...... Hardware handdoff blob (size 4KB)
+ * 0xFFE3_FFFF ...... End of OCRAM
+ *
+ * SDRAM
+ * 0x0000_0000 ...... Start of SDRAM_1
+ * unused / empty space for image loading
+ * Size 64MB ...... MALLOC (size CONFIG_SYS_SPL_MALLOC_SIZE)
+ * Size 1MB ...... BSS (size CONFIG_SPL_BSS_MAX_SIZE)
+ * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB)
+ *
+ */
+#define CONFIG_SPL_TARGET "spl/u-boot-spl.hex"
+#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
+#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
+#define CONFIG_SPL_BSS_START_ADDR (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE \
+ - CONFIG_SPL_BSS_MAX_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE (CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR \
+ - CONFIG_SYS_SPL_MALLOC_SIZE)
+
+/* SPL SDMMC boot support */
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#endif /* __CONFIG_SOCFPGA_SOC64_COMMON_H__ */
/* SPDX-License-Identifier: GPL-2.0
*
- * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
+ * Copyright (C) 2017-2019 Intel Corporation <www.intel.com>
*
*/
#ifndef __CONFIG_SOCFGPA_STRATIX10_H__
#define __CONFIG_SOCFGPA_STRATIX10_H__
-#include <asm/arch/base_addr_s10.h>
-#include <asm/arch/handoff_s10.h>
+#include <configs/socfpga_soc64_common.h>
-/*
- * U-Boot general configurations
- */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_LOADADDR 0x2000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_REMAKE_ELF
-/* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */
-#define CPU_RELEASE_ADDR 0xFFD12210
-#define CONFIG_SYS_CACHELINE_SIZE 64
-#define CONFIG_SYS_MEM_RESERVE_SECURE 0 /* using OCRAM, not DDR */
-
-/*
- * U-Boot console configurations
- */
-#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_SYS_CBSIZE 2048
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/* Extend size of kernel image for uncompression */
-#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024)
-
-/*
- * U-Boot run time memory configurations
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x40000
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR \
- + CONFIG_SYS_INIT_RAM_SIZE \
- - S10_HANDOFF_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_SP_ADDR)
-#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024)
-
-/*
- * U-Boot environment configurations
- */
-#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */
-
-/*
- * QSPI support
- */
- #ifdef CONFIG_CADENCE_QSPI
-/* Enable it if you want to use dual-stacked mode */
-/*#define CONFIG_QSPI_RBF_ADDR 0x720000*/
-
-/* Flash device info */
-
-/*#define CONFIG_ENV_IS_IN_SPI_FLASH*/
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT "nor0=ff705000.spi.0"
-#endif /* CONFIG_SPL_BUILD */
-
-#ifndef __ASSEMBLY__
-unsigned int cm_get_qspi_controller_clk_hz(void);
-#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz()
-#endif
-
-#endif /* CONFIG_CADENCE_QSPI */
-
-/*
- * Boot arguments passed to the boot command. The value of
- * CONFIG_BOOTARGS goes into the environment value "bootargs".
- * Do note the value will override also the chosen node in FDT blob.
- */
-#define CONFIG_BOOTARGS "earlycon"
-#define CONFIG_BOOTCOMMAND "run fatscript; run mmcload;run linux_qspi_enable;" \
- "run mmcboot"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "bootfile=Image\0" \
- "fdt_addr=8000000\0" \
- "fdtimage=socfpga_stratix10_socdk.dtb\0" \
- "mmcroot=/dev/mmcblk0p2\0" \
- "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
- " root=${mmcroot} rw rootwait;" \
- "booti ${loadaddr} - ${fdt_addr}\0" \
- "mmcload=mmc rescan;" \
- "load mmc 0:1 ${loadaddr} ${bootfile};" \
- "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
- "linux_qspi_enable=if sf probe; then " \
- "echo Enabling QSPI at Linux DTB...;" \
- "fdt addr ${fdt_addr}; fdt resize;" \
- "fdt set /soc/spi@ff8d2000 status okay;" \
- "fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency " \
- " ${qspi_clock}; fi; \0" \
- "scriptaddr=0x02100000\0" \
- "scriptfile=u-boot.scr\0" \
- "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \
- "then source ${scriptaddr}; fi\0" \
- "socfpga_legacy_reset_compat=1\0"
-
-/*
- * Generic Interrupt Controller Definitions
- */
-#define CONFIG_GICV2
-
-/*
- * External memory configurations
- */
-#define PHYS_SDRAM_1 0x0
-#define PHYS_SDRAM_1_SIZE (1 * 1024 * 1024 * 1024)
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_MEMTEST_START 0
-#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE - 0x200000
-
-/*
- * Serial / UART configurations
- */
-#define CONFIG_SYS_NS16550_CLK 100000000
-#define CONFIG_SYS_NS16550_MEM32
-
-/*
- * Timer & watchdog configurations
- */
-#define COUNTER_FREQUENCY 400000000
-
-/*
- * SDMMC configurations
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256
-#endif
-/*
- * Flash configurations
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-/* Ethernet on SoC (EMAC) */
-#if defined(CONFIG_CMD_NET)
-#define CONFIG_DW_ALTDESCRIPTOR
-#endif /* CONFIG_CMD_NET */
-
-/*
- * L4 Watchdog
- */
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_DESIGNWARE_WATCHDOG
-#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
-#ifndef __ASSEMBLY__
-unsigned int cm_get_l4_sys_free_clk_hz(void);
-#define CONFIG_DW_WDT_CLOCK_KHZ (cm_get_l4_sys_free_clk_hz() / 1000)
-#endif
-#endif
-
-/*
- * SPL memory layout
- *
- * On chip RAM
- * 0xFFE0_0000 ...... Start of OCRAM
- * SPL code, rwdata
- * empty space
- * 0xFFEx_xxxx ...... Top of stack (grows down)
- * 0xFFEy_yyyy ...... Global Data
- * 0xFFEz_zzzz ...... Malloc prior relocation (size CONFIG_SYS_MALLOC_F_LEN)
- * 0xFFE3_F000 ...... Hardware handdoff blob (size 4KB)
- * 0xFFE3_FFFF ...... End of OCRAM
- *
- * SDRAM
- * 0x0000_0000 ...... Start of SDRAM_1
- * unused / empty space for image loading
- * Size 64MB ...... MALLOC (size CONFIG_SYS_SPL_MALLOC_SIZE)
- * Size 1MB ...... BSS (size CONFIG_SPL_BSS_MAX_SIZE)
- * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB)
- *
- */
-#define CONFIG_SPL_TARGET "spl/u-boot-spl.hex"
-#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
-#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
-#define CONFIG_SPL_BSS_START_ADDR (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE \
- - CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE (CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR \
- - CONFIG_SYS_SPL_MALLOC_SIZE)
-
-/* SPL SDMMC boot support */
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_SOCFGPA_STRATIX10_H__ */
projects / platform / kernel / u-boot.git / commitdiff