staging: comedi: rtd520: add whitespace to the subdevice init

To improve the readability, add some whitespace to the subdevice
init.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index dc470ef..6c694fb 100644 (file)
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -1332,49 +1332,48 @@ static int rtd_attach_pci(struct comedi_device *dev, struct pci_dev *pcidev)
 
        s = &dev->subdevices[0];
        /* analog input subdevice */
-       s->type = COMEDI_SUBD_AI;
-       s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON | SDF_DIFF;
-       s->n_chan = 16;
-       s->maxdata = 0x0fff;
-       s->range_table = thisboard->ai_range;
-
-       s->len_chanlist = RTD_MAX_CHANLIST;     /* devpriv->fifoLen */
-       s->insn_read = rtd_ai_rinsn;
+       s->type         = COMEDI_SUBD_AI;
+       s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON | SDF_DIFF;
+       s->n_chan       = 16;
+       s->maxdata      = 0x0fff;
+       s->range_table  = thisboard->ai_range;
+       s->len_chanlist = RTD_MAX_CHANLIST;
+       s->insn_read    = rtd_ai_rinsn;
        if (dev->irq) {
                dev->read_subdev = s;
-               s->subdev_flags |= SDF_CMD_READ;
-               s->do_cmd = rtd_ai_cmd;
-               s->do_cmdtest = rtd_ai_cmdtest;
-               s->cancel = rtd_ai_cancel;
+               s->subdev_flags |= SDF_CMD_READ;
+               s->do_cmd       = rtd_ai_cmd;
+               s->do_cmdtest   = rtd_ai_cmdtest;
+               s->cancel       = rtd_ai_cancel;
        }
 
        s = &dev->subdevices[1];
        /* analog output subdevice */
-       s->type = COMEDI_SUBD_AO;
-       s->subdev_flags = SDF_WRITABLE;
-       s->n_chan = 2;
-       s->maxdata = 0x0fff;
-       s->range_table = &rtd_ao_range;
-       s->insn_write = rtd_ao_winsn;
-       s->insn_read = rtd_ao_rinsn;
+       s->type         = COMEDI_SUBD_AO;
+       s->subdev_flags = SDF_WRITABLE;
+       s->n_chan       = 2;
+       s->maxdata      = 0x0fff;
+       s->range_table  = &rtd_ao_range;
+       s->insn_write   = rtd_ao_winsn;
+       s->insn_read    = rtd_ao_rinsn;
 
        s = &dev->subdevices[2];
        /* digital i/o subdevice */
-       s->type = COMEDI_SUBD_DIO;
-       s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+       s->type         = COMEDI_SUBD_DIO;
+       s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
        /* we only support port 0 right now.  Ignoring port 1 and user IO */
-       s->n_chan = 8;
-       s->maxdata = 1;
-       s->range_table = &range_digital;
-       s->insn_bits = rtd_dio_insn_bits;
-       s->insn_config = rtd_dio_insn_config;
+       s->n_chan       = 8;
+       s->maxdata      = 1;
+       s->range_table  = &range_digital;
+       s->insn_bits    = rtd_dio_insn_bits;
+       s->insn_config  = rtd_dio_insn_config;
 
        /* timer/counter subdevices (not currently supported) */
        s = &dev->subdevices[3];
-       s->type = COMEDI_SUBD_COUNTER;
-       s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-       s->n_chan = 3;
-       s->maxdata = 0xffff;
+       s->type         = COMEDI_SUBD_COUNTER;
+       s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+       s->n_chan       = 3;
+       s->maxdata      = 0xffff;
 
        rtd_init_board(dev);