arm925t: Fix CONFIG_SYS_HZ to 1000

Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
get_timer.

Changes since original version:
* Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
  improve timer resolution.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>

diff --git a/cpu/arm925t/interrupts.c b/cpu/arm925t/interrupts.c
index e5c77f7..ec2a978 100644 (file)
--- a/cpu/arm925t/interrupts.c
+++ b/cpu/arm925t/interrupts.c
@@ -1,4 +1,7 @@
 /*
+ * (C) Copyright 2009
+ * 2N Telekomunikace, <www.2n.cz>
+ *
  * (C) Copyright 2003
  * Texas Instruments, <www.ti.com>
  *
@@ -37,7 +40,8 @@
 #include <configs/omap1510.h>
 #include <asm/io.h>
 
-#define TIMER_LOAD_VAL 0xffffffff
+#define TIMER_LOAD_VAL 0xffffffff
+#define TIMER_CLOCK    (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV))
 
 static uint32_t timestamp;
 static uint32_t lastdec;
@@ -79,85 +83,41 @@ void set_timer (ulong t)
 /* delay x useconds AND preserve advance timestamp value */
 void udelay (unsigned long usec)
 {
-       ulong tmo, tmp;
-
-       if (usec >= 1000) {             /* if "big" number, spread normalization to seconds */
-               tmo = usec / 1000;      /* start to normalize for usec to ticks per sec */
-               tmo *= CONFIG_SYS_HZ;   /* find number of "ticks" to wait to achieve target */
-               tmo /= 1000;            /* finish normalize. */
-       } else {                        /* else small number, don't kill it prior to HZ multiply */
-               tmo = usec * CONFIG_SYS_HZ;
-               tmo /= (1000*1000);
+       int32_t tmo = usec * (TIMER_CLOCK / 1000) / 1000;
+       uint32_t now, last = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM);
+
+       while (tmo > 0) {
+               now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM);
+               if (last < now) /* count down timer underflow */
+                       tmo -= TIMER_LOAD_VAL - now + last;
+               else
+                       tmo -= last - now;
+               last = now;
        }
-
-       tmp = get_timer (0);            /* get current timestamp */
-       if ((tmo + tmp + 1) < tmp)      /* if setting this fordward will roll time stamp */
-               reset_timer_masked ();  /* reset "advancing" timestamp to 0, set lastdec value */
-       else
-               tmo += tmp;             /* else, set advancing stamp wake up time */
-
-       while (get_timer_masked () < tmo) /* loop till event */
-               /*NOP*/;
 }
 
 void reset_timer_masked (void)
 {
        /* reset time */
-       lastdec = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM);
+       lastdec = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) /
+                       (TIMER_CLOCK / CONFIG_SYS_HZ);
        timestamp = 0;         /* start "advancing" time stamp from 0 */
 }
 
 ulong get_timer_masked (void)
 {
-       uint32_t now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM);
-
-       if (lastdec >= now) {           /* normal mode (non roll) */
-               /* normal mode */
-               timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */
-       } else {                        /* we have overflow of the count down timer */
-               /* nts = ts + ld + (TLV - now)
-                * ts=old stamp, ld=time that passed before passing through -1
-                * (TLV-now) amount of time after passing though -1
-                * nts = new "advancing time stamp"...it could also roll and cause problems.
-                */
-               timestamp += lastdec + TIMER_LOAD_VAL - now;
-       }
+       uint32_t now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) /
+                       (TIMER_CLOCK / CONFIG_SYS_HZ);
+       if (lastdec < now)      /* count down timer underflow */
+               timestamp += TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ) -
+                               now + lastdec;
+       else
+               timestamp += lastdec - now;
        lastdec = now;
 
        return timestamp;
 }
 
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
-#ifdef CONFIG_INNOVATOROMAP1510
-       #define LOOPS_PER_MSEC 60 /* tuned on omap1510 */
-       volatile int i, time_remaining = LOOPS_PER_MSEC*usec;
-       for (i=time_remaining; i>0; i--) { }
-#else
-
-       ulong tmo;
-       ulong endtime;
-       signed long diff;
-
-       if (usec >= 1000) {             /* if "big" number, spread normalization to seconds */
-               tmo = usec / 1000;      /* start to normalize for usec to ticks per sec */
-               tmo *= CONFIG_SYS_HZ;   /* find number of "ticks" to wait to achieve target */
-               tmo /= 1000;            /* finish normalize. */
-       } else {                        /* else small number, don't kill it prior to HZ multiply */
-               tmo = usec * CONFIG_SYS_HZ;
-               tmo /= (1000*1000);
-       }
-
-       endtime = get_timer_masked () + tmo;
-
-       do {
-               ulong now = get_timer_masked ();
-               diff = endtime - now;
-       } while (diff >= 0);
-#endif
-}
-
 /*
  * This function is derived from PowerPC code (read timebase as long long).
  * On ARM it just returns the timer value.

diff --git a/include/configs/SX1.h b/include/configs/SX1.h
index caa6592..6149276 100644 (file)
--- a/include/configs/SX1.h
+++ b/include/configs/SX1.h
@@ -135,12 +135,12 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x10000000      /* default load address */
 
-/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
 #define CONFIG_SYS_TIMERBASE   OMAP1510_TIMER1_BASE    /* use timer 1 */
-#define CONFIG_SYS_PTV         7       /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ          ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
+#define CONFIG_SYS_PTV         2       /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ          1000
 
 /*-----------------------------------------------------------------------
  * Stack sizes

diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index 39560de..5cfee66 100644 (file)
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -222,12 +222,12 @@
 
 #define CONFIG_SYS_LOAD_ADDR           PHYS_SDRAM_1 + 0x400000 /* default load address */
 
-/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
 #define CONFIG_SYS_TIMERBASE           OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV                 7               /* 2^(pvt+1), divide by 256 */
-#define CONFIG_SYS_HZ                  ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
+#define CONFIG_SYS_PTV                 7
+#define CONFIG_SYS_HZ                  1000
 
 #define OMAP5910_DPLL_DIV      1
 #define OMAP5910_DPLL_MUL      ((CONFIG_SYS_CLK_FREQ * \

diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
index 6c1c5ec..8408209 100644 (file)
--- a/include/configs/omap1510inn.h
+++ b/include/configs/omap1510inn.h
@@ -132,12 +132,12 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x10000000      /* default load address */
 
-/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
 #define CONFIG_SYS_TIMERBASE   OMAP1510_TIMER1_BASE    /* use timer 1 */
-#define CONFIG_SYS_PTV         7       /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ          ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
+#define CONFIG_SYS_PTV         2       /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ          1000
 
 /*-----------------------------------------------------------------------
  * Stack sizes

diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
index 3f97843..aa8efaa 100644 (file)
--- a/include/configs/voiceblue.h
+++ b/include/configs/voiceblue.h
@@ -210,12 +210,12 @@
 #define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_1
 #define CONFIG_SYS_MEMTEST_END         PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED
 
-/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
  * This time is further subdivided by a local divisor.
  */
 #define CONFIG_SYS_TIMERBASE   OMAP1510_TIMER1_BASE
 #define CONFIG_SYS_PTV         7       /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ          ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
+#define CONFIG_SYS_HZ          1000
 
 #define OMAP5910_DPLL_DIV      1
 #define OMAP5910_DPLL_MUL      ((CONFIG_SYS_CLK_FREQ * \