+++ /dev/null
-/*\r
-* Copyright (c) 2016 Samsung Electronics Co., Ltd All Rights Reserved\r
-*\r
-* Licensed under the Apache License, Version 2.0 (the License);\r
-* you may not use this file except in compliance with the License.\r
-* You may obtain a copy of the License at\r
-*\r
-* http://www.apache.org/licenses/LICENSE-2.0\r
-*\r
-* Unless required by applicable law or agreed to in writing, software\r
-* distributed under the License is distributed on an AS IS BASIS,\r
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
-* See the License for the specific language governing permissions and\r
-* limitations under the License.\r
-*/\r
-\r
-using System.Reflection;\r
-using System.Runtime.CompilerServices;\r
-using System.Runtime.InteropServices;\r
-\r
-// General Information about an assembly is controlled through the following \r
-// set of attributes. Change these attribute values to modify the information\r
-// associated with an assembly.\r
-[assembly: AssemblyTitle("Tizen.Content.Download")]\r
-[assembly: AssemblyDescription("")]\r
-[assembly: AssemblyConfiguration("")]\r
-[assembly: AssemblyCompany("")]\r
-[assembly: AssemblyProduct("Tizen.Content.Download")]\r
-[assembly: AssemblyCopyright("Copyright © 2016")]\r
-[assembly: AssemblyTrademark("")]\r
-[assembly: AssemblyCulture("")]\r
-\r
-// Setting ComVisible to false makes the types in this assembly not visible \r
-// to COM components. If you need to access a type in this assembly from \r
-// COM, set the ComVisible attribute to true on that type.\r
-[assembly: ComVisible(false)]\r
-\r
-// The following GUID is for the ID of the typelib if this project is exposed to COM\r
-[assembly: Guid("5df9cb6c-6def-4472-883c-573cb0b4d61d")]\r
-\r
-// Version information for an assembly consists of the following four values:\r
-//\r
-// Major Version\r
-// Minor Version \r
-// Build Number\r
-// Revision\r
-//\r
-// You can specify all the values or you can default the Build and Revision Numbers \r
-// by using the '*' as shown below:\r
-// [assembly: AssemblyVersion("1.0.*")]\r
-[assembly: AssemblyVersion("1.0.0.0")]\r
-[assembly: AssemblyFileVersion("1.0.0.0")]\r
-<?xml version="1.0" encoding="utf-8"?>\r
-<Project ToolsVersion="14.0" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">\r
- <PropertyGroup>\r
- <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>\r
- <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>\r
- <ProjectGuid>{7F7C271D-B195-4186-9B0C-CCEE8B5F561E}</ProjectGuid>\r
- <OutputType>Library</OutputType>\r
- <AppDesignerFolder>Properties</AppDesignerFolder>\r
- <RootNamespace>Tizen.Content.Download</RootNamespace>\r
- <AssemblyName>Tizen.Content.Download</AssemblyName>\r
- <FileAlignment>512</FileAlignment>\r
- </PropertyGroup>\r
- <PropertyGroup>\r
- <TargetFrameworkIdentifier>.NETStandard</TargetFrameworkIdentifier>\r
- <TargetFrameworkVersion>v1.3</TargetFrameworkVersion>\r
- <NuGetTargetMoniker>.NETStandard,Version=v1.3</NuGetTargetMoniker>\r
- <AddAdditionalExplicitAssemblyReferences>false</AddAdditionalExplicitAssemblyReferences>\r
- <NoStdLib>true</NoStdLib>\r
- <NoWarn>$(NoWarn);1701;1702</NoWarn>\r
- </PropertyGroup>\r
- <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">\r
- <DebugSymbols>true</DebugSymbols>\r
- <DebugType>full</DebugType>\r
- <Optimize>true</Optimize>\r
- <OutputPath>bin\Debug\</OutputPath>\r
- <DefineConstants>DEBUG;TRACE</DefineConstants>\r
- <ErrorReport>prompt</ErrorReport>\r
- <WarningLevel>4</WarningLevel>\r
- </PropertyGroup>\r
- <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">\r
- <DebugType>pdbonly</DebugType>\r
- <Optimize>true</Optimize>\r
- <OutputPath>bin\Release\</OutputPath>\r
- <DefineConstants>TRACE</DefineConstants>\r
- <ErrorReport>prompt</ErrorReport>\r
- <WarningLevel>4</WarningLevel>\r
- </PropertyGroup>\r
- <PropertyGroup>\r
- <SignAssembly>true</SignAssembly>\r
- </PropertyGroup>\r
- <PropertyGroup>\r
- <AssemblyOriginatorKeyFile>Tizen.Content.Download.snk</AssemblyOriginatorKeyFile>\r
- </PropertyGroup>\r
- <ItemGroup>\r
- <Compile Include="Tizen.Content.Download\DownloadEnumerator.cs" />\r
- <Compile Include="Tizen.Content.Download\Notification.cs" />\r
- <Compile Include="Tizen.Content.Download\Request.cs" />\r
- <Compile Include="Tizen.Content.Download\StateChangedEventArgs.cs" />\r
- <Compile Include="Tizen.Content.Download\ProgressChangedEventArgs.cs" />\r
- <Compile Include="Tizen.Content.Download\DownloadErrorFactory.cs" />\r
- <Compile Include="Interop\Interop.Download.cs" />\r
- <Compile Include="Interop\Interop.Libraries.cs" />\r
- <Compile Include="Properties\AssemblyInfo.cs" />\r
- </ItemGroup>\r
- <ItemGroup>\r
- <None Include="Tizen.Content.Download.project.json" />\r
- <None Include="Tizen.Content.Download.snk" />\r
- </ItemGroup>\r
- <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />\r
- <!-- To modify your build process, add your task inside one of the targets below and uncomment it.\r
- Other similar extension points exist, see Microsoft.Common.targets.\r
- <Target Name="BeforeBuild">\r
- </Target>\r
- <Target Name="AfterBuild">\r
- </Target>\r
- -->\r
- <PropertyGroup>\r
- <!-- https://github.com/dotnet/corefxlab/tree/master/samples/NetCoreSample and\r
- https://docs.microsoft.com/en-us/dotnet/articles/core/tutorials/target-dotnetcore-with-msbuild\r
- -->\r
- <!-- We don't use any of MSBuild's resolution logic for resolving the framework, so just set these two\r
- properties to any folder that exists to skip the GetReferenceAssemblyPaths task (not target) and\r
- to prevent it from outputting a warning (MSB3644).\r
- -->\r
- <_TargetFrameworkDirectories>$(MSBuildThisFileDirectory)</_TargetFrameworkDirectories>\r
- <_FullFrameworkReferenceAssemblyPaths>$(MSBuildThisFileDirectory)</_FullFrameworkReferenceAssemblyPaths>\r
- <AutoUnifyAssemblyReferences>true</AutoUnifyAssemblyReferences>\r
- </PropertyGroup>\r
-</Project>
\ No newline at end of file
+<Project Sdk="Microsoft.NET.Sdk">
+
+ <PropertyGroup>
+ <TargetFramework>netstandard1.3</TargetFramework>
+ <AllowUnsafeBlocks>True</AllowUnsafeBlocks>
+ <SignAssembly>True</SignAssembly>
+ <AssemblyOriginatorKeyFile>Tizen.Content.Download.snk</AssemblyOriginatorKeyFile>
+ <PublicSign Condition="'$(OS)' != 'Windows_NT'">true</PublicSign>
+ <GenerateReferenceAssembly>True</GenerateReferenceAssembly>
+ </PropertyGroup>
+
+ <ItemGroup>
+ <PackageReference Include="Tizen.Applications.Common" Version="1.5.6" />
+ </ItemGroup>
+
+</Project>