UART port in serial_core, that is bound to TTY like ttyS0.
uartclk = 16 * baud_base
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/type
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current tty type for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/line
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current tty line number for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/port
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current tty port I/O address for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/irq
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Shows the current primary interrupt for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/flags
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the tty port status flags for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/xmit_fifo_size
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the transmit FIFO size for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/close_delay
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the closing delay time for this port in ms.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/closing_wait
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the close wait time for this port in ms.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/custom_divisor
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the custom divisor if any that is set on this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/io_type
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the I/O type that is to be used with the iomem base
+ address.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/iomem_base
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ The I/O memory base for this port.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
+
+What: /sys/class/tty/ttyS0/iomem_reg_shift
+Date: October 2012
+Contact: Alan Cox <alan@linux.intel.com>
+Description:
+ Show the register shift indicating the spacing to be used
+ for accesses on this iomem address.
+
+ These sysfs values expose the TIOCGSERIAL interface via
+ sysfs rather than via ioctls.
return snprintf(buf, PAGE_SIZE, "%d\n", tmp.baud_base * 16);
}
+static ssize_t uart_get_attr_type(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.type);
+}
+static ssize_t uart_get_attr_line(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.line);
+}
+
+static ssize_t uart_get_attr_port(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "0x%lX\n", (unsigned long)(tmp.port | (tmp.port_high << HIGH_BITS_OFFSET)));
+}
+
+static ssize_t uart_get_attr_irq(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.irq);
+}
+
+static ssize_t uart_get_attr_flags(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "0x%X\n", tmp.flags);
+}
+
+static ssize_t uart_get_attr_xmit_fifo_size(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.xmit_fifo_size);
+}
+
+
+static ssize_t uart_get_attr_close_delay(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.close_delay);
+}
+
+
+static ssize_t uart_get_attr_closing_wait(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.closing_wait);
+}
+
+static ssize_t uart_get_attr_custom_divisor(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.custom_divisor);
+}
+
+static ssize_t uart_get_attr_io_type(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.io_type);
+}
+
+static ssize_t uart_get_attr_iomem_base(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "0x%lX\n", (unsigned long)tmp.iomem_base);
+}
+
+static ssize_t uart_get_attr_iomem_reg_shift(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct serial_struct tmp;
+ struct tty_port *port = dev_get_drvdata(dev);
+
+ uart_get_info(port, &tmp);
+ return snprintf(buf, PAGE_SIZE, "%d\n", tmp.iomem_reg_shift);
+}
+
+static DEVICE_ATTR(type, S_IRUSR | S_IRGRP, uart_get_attr_type, NULL);
+static DEVICE_ATTR(line, S_IRUSR | S_IRGRP, uart_get_attr_line, NULL);
+static DEVICE_ATTR(port, S_IRUSR | S_IRGRP, uart_get_attr_port, NULL);
+static DEVICE_ATTR(irq, S_IRUSR | S_IRGRP, uart_get_attr_irq, NULL);
+static DEVICE_ATTR(flags, S_IRUSR | S_IRGRP, uart_get_attr_flags, NULL);
+static DEVICE_ATTR(xmit_fifo_size, S_IRUSR | S_IRGRP, uart_get_attr_xmit_fifo_size, NULL);
static DEVICE_ATTR(uartclk, S_IRUSR | S_IRGRP, uart_get_attr_uartclk, NULL);
+static DEVICE_ATTR(close_delay, S_IRUSR | S_IRGRP, uart_get_attr_close_delay, NULL);
+static DEVICE_ATTR(closing_wait, S_IRUSR | S_IRGRP, uart_get_attr_closing_wait, NULL);
+static DEVICE_ATTR(custom_divisor, S_IRUSR | S_IRGRP, uart_get_attr_custom_divisor, NULL);
+static DEVICE_ATTR(io_type, S_IRUSR | S_IRGRP, uart_get_attr_io_type, NULL);
+static DEVICE_ATTR(iomem_base, S_IRUSR | S_IRGRP, uart_get_attr_iomem_base, NULL);
+static DEVICE_ATTR(iomem_reg_shift, S_IRUSR | S_IRGRP, uart_get_attr_iomem_reg_shift, NULL);
static struct attribute *tty_dev_attrs[] = {
+ &dev_attr_type.attr,
+ &dev_attr_line.attr,
+ &dev_attr_port.attr,
+ &dev_attr_irq.attr,
+ &dev_attr_flags.attr,
+ &dev_attr_xmit_fifo_size.attr,
&dev_attr_uartclk.attr,
+ &dev_attr_close_delay.attr,
+ &dev_attr_closing_wait.attr,
+ &dev_attr_custom_divisor.attr,
+ &dev_attr_io_type.attr,
+ &dev_attr_iomem_base.attr,
+ &dev_attr_iomem_reg_shift.attr,
NULL,
};