Staging: line6: fix checkpatch errors in driver.c
authorGreg Kroah-Hartman <gregkh@suse.de>
Sat, 28 Feb 2009 06:42:18 +0000 (22:42 -0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 3 Apr 2009 21:54:26 +0000 (14:54 -0700)
Lots of warnings also fixed up.

Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/line6/driver.c

index 0484ee6..85a20d0 100644 (file)
@@ -50,7 +50,7 @@ static struct usb_device_id line6_id_table[] = {
        { USB_DEVICE(LINE6_VENDOR_ID, LINE6_DEVID_VARIAX) },
        { },
 };
-MODULE_DEVICE_TABLE (usb, line6_id_table);
+MODULE_DEVICE_TABLE(usb, line6_id_table);
 
 static struct line6_properties line6_properties_table[] = {
        { "BassPODxt",        LINE6_BIT_BASSPODXT,     LINE6_BIT_CONTROL_PCM },
@@ -82,8 +82,7 @@ struct workqueue_struct *line6_workqueue;
 /**
         Class for asynchronous messages.
 */
-struct message
-{
+struct message {
        struct usb_line6 *line6;
        const char *buffer;
        int size;
@@ -95,7 +94,8 @@ struct message
        Forward declarations.
 */
 static void line6_data_received(struct urb *urb);
-static int line6_send_raw_message_async_part(struct message *msg, struct urb *urb);
+static int line6_send_raw_message_async_part(struct message *msg,
+                                            struct urb *urb);
 
 
 /*
@@ -103,13 +103,10 @@ static int line6_send_raw_message_async_part(struct message *msg, struct urb *ur
 */
 static int line6_start_listen(struct usb_line6 *line6)
 {
-       usb_fill_int_urb(line6->urb_listen,
-                                                                        line6->usbdev,
-                                                                        usb_rcvintpipe(line6->usbdev, line6->ep_control_read),
-                                                                        line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
-                                                                        line6_data_received,
-                                                                        line6,
-                                                                        line6->interval);
+       usb_fill_int_urb(line6->urb_listen, line6->usbdev,
+                        usb_rcvintpipe(line6->usbdev, line6->ep_control_read),
+                        line6->buffer_listen, LINE6_BUFSIZE_LISTEN,
+                        line6_data_received, line6, line6->interval);
        line6->urb_listen->actual_length = 0;
        return usb_submit_urb(line6->urb_listen, GFP_KERNEL);
 }
@@ -118,31 +115,31 @@ static int line6_start_listen(struct usb_line6 *line6)
 /*
        Write hexdump to syslog.
 */
-void line6_write_hexdump(struct usb_line6 *line6, char dir, const unsigned char *buffer, int size)
+void line6_write_hexdump(struct usb_line6 *line6, char dir,
+                        const unsigned char *buffer, int size)
 {
        static const int BYTES_PER_LINE = 8;
        char hexdump[100];
        char asc[BYTES_PER_LINE + 1];
        int i, j;
 
-       for(i = 0; i < size; i += BYTES_PER_LINE) {
+       for (i = 0; i < size; i += BYTES_PER_LINE) {
                int hexdumpsize = sizeof(hexdump);
                char *p = hexdump;
                int n = min(size - i, BYTES_PER_LINE);
                asc[n] = 0;
 
-               for(j = 0; j < BYTES_PER_LINE; ++j) {
+               for (j = 0; j < BYTES_PER_LINE; ++j) {
                        int bytes;
 
-                       if(j < n) {
+                       if (j < n) {
                                unsigned char val = buffer[i + j];
                                bytes = snprintf(p, hexdumpsize, " %02X", val);
                                asc[j] = ((val >= 0x20) && (val < 0x7f)) ? val : '.';
-                       }
-                       else
+                       } else
                                bytes = snprintf(p, hexdumpsize, "   ");
 
-                       if(bytes > hexdumpsize)
+                       if (bytes > hexdumpsize)
                                break;  /* buffer overflow */
 
                        p += bytes;
@@ -162,17 +159,19 @@ static void line6_dump_urb(struct urb *urb)
 {
        struct usb_line6 *line6 = (struct usb_line6 *)urb->context;
 
-       if(urb->status < 0)
+       if (urb->status < 0)
                return;
 
-       line6_write_hexdump(line6, 'R', (unsigned char *)urb->transfer_buffer, urb->actual_length);
+       line6_write_hexdump(line6, 'R', (unsigned char *)urb->transfer_buffer,
+                           urb->actual_length);
 }
 #endif
 
 /*
        Send raw message in pieces of wMaxPacketSize bytes.
 */
-int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, int size)
+int line6_send_raw_message(struct usb_line6 *line6, const char *buffer,
+                          int size)
 {
        int i, done = 0;
 
@@ -180,16 +179,21 @@ int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, int size
        line6_write_hexdump(line6, 'S', buffer, size);
 #endif
 
-       for(i = 0; i < size; i += line6->max_packet_size)       {
+       for (i = 0; i < size; i += line6->max_packet_size) {
                int partial;
                const char *frag_buf = buffer + i;
                int frag_size = min(line6->max_packet_size, size - i);
-               int retval = usb_interrupt_msg(line6->usbdev,
-                                                                                                                                        usb_sndintpipe(line6->usbdev, line6->ep_control_write),
-                                                                                                                                        (char *)frag_buf, frag_size, &partial, LINE6_TIMEOUT * HZ);
+               int retval;
+
+               retval = usb_interrupt_msg(line6->usbdev,
+                                          usb_sndintpipe(line6->usbdev,
+                                                         line6->ep_control_write),
+                                          (char *)frag_buf, frag_size,
+                                          &partial, LINE6_TIMEOUT * HZ);
 
-               if(retval) {
-                       dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n", retval);
+               if (retval) {
+                       dev_err(line6->ifcdev,
+                               "usb_interrupt_msg failed (%d)\n", retval);
                        break;
                }
 
@@ -206,29 +210,28 @@ static void line6_async_request_sent(struct urb *urb)
 {
        struct message *msg = (struct message *)urb->context;
 
-       if(msg->done >= msg->size) {
+       if (msg->done >= msg->size) {
                usb_free_urb(urb);
                kfree(msg);
-       }
-       else
+       } else
                line6_send_raw_message_async_part(msg, urb);
 }
 
 /*
        Asynchronously send part of a raw message.
 */
-static int line6_send_raw_message_async_part(struct message *msg, struct urb *urb)
+static int line6_send_raw_message_async_part(struct message *msg,
+                                            struct urb *urb)
 {
        int retval;
        struct usb_line6 *line6 = msg->line6;
        int done = msg->done;
        int bytes = min(msg->size - done, line6->max_packet_size);
 
-       usb_fill_int_urb(urb,
-                                                                        line6->usbdev,
-                                                                        usb_sndintpipe(line6->usbdev, line6->ep_control_write),
-                                                                        (char *)msg->buffer + done, bytes,
-                                                                        line6_async_request_sent, msg, line6->interval);
+       usb_fill_int_urb(urb, line6->usbdev,
+                        usb_sndintpipe(line6->usbdev, line6->ep_control_write),
+                        (char *)msg->buffer + done, bytes,
+                        line6_async_request_sent, msg, line6->interval);
 
 #if DO_DUMP_URB_SEND
        line6_write_hexdump(line6, 'S', (char *)msg->buffer + done, bytes);
@@ -237,8 +240,9 @@ static int line6_send_raw_message_async_part(struct message *msg, struct urb *ur
        msg->done += bytes;
        retval = usb_submit_urb(urb, GFP_ATOMIC);
 
-       if(retval < 0) {
-               dev_err(line6->ifcdev, "line6_send_raw_message_async: usb_submit_urb failed (%d)\n", retval);
+       if (retval < 0) {
+               dev_err(line6->ifcdev, "%s: usb_submit_urb failed (%d)\n",
+                       __func__, retval);
                usb_free_urb(urb);
                kfree(msg);
                return -EINVAL;
@@ -250,7 +254,8 @@ static int line6_send_raw_message_async_part(struct message *msg, struct urb *ur
 /*
        Asynchronously send raw message.
 */
-int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, int size)
+int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer,
+                                int size)
 {
        struct message *msg;
        struct urb *urb;
@@ -258,7 +263,7 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, in
        /* create message: */
        msg = kmalloc(sizeof(struct message), GFP_ATOMIC);
 
-       if(msg == NULL) {
+       if (msg == NULL) {
                dev_err(line6->ifcdev, "Out of memory\n");
                return -ENOMEM;
        }
@@ -266,7 +271,7 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, in
        /* create URB: */
        urb = usb_alloc_urb(0, GFP_ATOMIC);
 
-       if(urb == NULL) {
+       if (urb == NULL) {
                kfree(msg);
                dev_err(line6->ifcdev, "Out of memory\n");
                return -ENOMEM;
@@ -285,7 +290,8 @@ int line6_send_raw_message_async(struct usb_line6 *line6, const char *buffer, in
 /*
        Send sysex message in pieces of wMaxPacketSize bytes.
 */
-int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer, int size)
+int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer,
+                            int size)
 {
        return line6_send_raw_message(line6, buffer, size + SYSEX_EXTRA_SIZE) - SYSEX_EXTRA_SIZE;
 }
@@ -295,11 +301,12 @@ int line6_send_sysex_message(struct usb_line6 *line6, const char *buffer, int si
        @param code sysex message code
        @param size number of bytes between code and sysex end
 */
-char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2, int size)
+char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, int code2,
+                              int size)
 {
        char *buffer = kmalloc(size + SYSEX_EXTRA_SIZE, GFP_KERNEL);
 
-       if(!buffer) {
+       if (!buffer) {
                dev_err(line6->ifcdev, "out of memory\n");
                return NULL;
        }
@@ -321,7 +328,7 @@ static void line6_data_received(struct urb *urb)
        struct MidiBuffer *mb = &line6->line6midi->midibuf_in;
        int done;
 
-       if(urb->status == -ESHUTDOWN)
+       if (urb->status == -ESHUTDOWN)
                return;
 
 #if DO_DUMP_URB_RECEIVE
@@ -330,19 +337,19 @@ static void line6_data_received(struct urb *urb)
 
        done = midibuf_write(mb, urb->transfer_buffer, urb->actual_length);
 
-       if(done < urb->actual_length) {
+       if (done < urb->actual_length) {
                midibuf_ignore(mb, done);
                DEBUG_MESSAGES(dev_err(line6->ifcdev, "%d %d buffer overflow - message skipped\n", done, urb->actual_length));
        }
 
-       for(;;) {
+       for (;;) {
                done = midibuf_read(mb, line6->buffer_message, LINE6_MESSAGE_MAXLEN);
 
-               if(done == 0)
+               if (done == 0)
                        break;
 
                /* MIDI input filter */
-               if(midibuf_skip_message(mb, line6->line6midi->midi_mask_receive))
+               if (midibuf_skip_message(mb, line6->line6midi->midi_mask_receive))
                        continue;
 
                line6->message_length = done;
@@ -351,7 +358,7 @@ static void line6_data_received(struct urb *urb)
 #endif
                line6_midi_receive(line6, line6->buffer_message, done);
 
-               switch(line6->usbdev->descriptor.idProduct) {
+               switch (line6->usbdev->descriptor.idProduct) {
                case LINE6_DEVID_BASSPODXT:
                case LINE6_DEVID_BASSPODXTLIVE:
                case LINE6_DEVID_BASSPODXTPRO:
@@ -362,7 +369,7 @@ static void line6_data_received(struct urb *urb)
                        break;
 
                case LINE6_DEVID_PODXTLIVE:
-                       switch(line6->interface_number) {
+                       switch (line6->interface_number) {
                        case PODXTLIVE_INTERFACE_POD:
                                pod_process_message((struct usb_line6_pod *)line6);
                                break;
@@ -399,7 +406,7 @@ int line6_send_program(struct usb_line6 *line6, int value)
 
        buffer = kmalloc(2, GFP_KERNEL);
 
-       if(!buffer) {
+       if (!buffer) {
                dev_err(line6->ifcdev, "out of memory\n");
                return -ENOMEM;
        }
@@ -412,10 +419,11 @@ int line6_send_program(struct usb_line6 *line6, int value)
 #endif
 
        retval = usb_interrupt_msg(line6->usbdev,
-                                                                                                                usb_sndintpipe(line6->usbdev, line6->ep_control_write),
-                                                                                                                buffer, 2, &partial, LINE6_TIMEOUT * HZ);
+                                  usb_sndintpipe(line6->usbdev,
+                                                 line6->ep_control_write),
+                                  buffer, 2, &partial, LINE6_TIMEOUT * HZ);
 
-       if(retval)
+       if (retval)
                dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n", retval);
 
        kfree(buffer);
@@ -433,7 +441,7 @@ int line6_transmit_parameter(struct usb_line6 *line6, int param, int value)
 
        buffer = kmalloc(3, GFP_KERNEL);
 
-       if(!buffer) {
+       if (!buffer) {
                dev_err(line6->ifcdev, "out of memory\n");
                return -ENOMEM;
        }
@@ -450,7 +458,7 @@ int line6_transmit_parameter(struct usb_line6 *line6, int param, int value)
                                                                                                                 usb_sndintpipe(line6->usbdev, line6->ep_control_write),
                                                                                                                 buffer, 3, &partial, LINE6_TIMEOUT * HZ);
 
-       if(retval)
+       if (retval)
                dev_err(line6->ifcdev, "usb_interrupt_msg failed (%d)\n", retval);
 
        kfree(buffer);
@@ -471,7 +479,7 @@ int line6_read_data(struct usb_line6 *line6, int address, void *data, size_t dat
                                                                                                USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
                                                                                                (datalen << 8) | 0x21, address, NULL, 0, LINE6_TIMEOUT * HZ);
 
-       if(ret < 0) {
+       if (ret < 0) {
                dev_err(line6->ifcdev, "read request failed (error %d)\n", ret);
                return ret;
        }
@@ -479,26 +487,34 @@ int line6_read_data(struct usb_line6 *line6, int address, void *data, size_t dat
        /* Wait for data length. We'll get a couple of 0xff until length arrives. */
        do {
                ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
-                                                                                                       USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-                                                                                                       0x0012, 0x0000, &len, 1, LINE6_TIMEOUT * HZ);
-               if(ret < 0) {
-                       dev_err(line6->ifcdev, "receive length failed (error %d)\n", ret);
+                                     USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+                                     USB_DIR_IN,
+                                     0x0012, 0x0000, &len, 1,
+                                     LINE6_TIMEOUT * HZ);
+               if (ret < 0) {
+                       dev_err(line6->ifcdev,
+                               "receive length failed (error %d)\n", ret);
                        return ret;
                }
        }
-       while(len == 0xff);
-
-       if(len != datalen) {  /* should be equal or something went wrong */
-               dev_err(line6->ifcdev, "length mismatch (expected %d, got %d)\n", (int)datalen, (int)len);
+       while (len == 0xff)
+               ;
+
+       if (len != datalen) {
+               /* should be equal or something went wrong */
+               dev_err(line6->ifcdev,
+                       "length mismatch (expected %d, got %d)\n",
+                       (int)datalen, (int)len);
                return -EINVAL;
        }
 
        /* receive the result: */
        ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
-                                                                                               USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-                                                                                               0x0013, 0x0000, data, datalen, LINE6_TIMEOUT * HZ);
+                             USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+                             0x0013, 0x0000, data, datalen,
+                             LINE6_TIMEOUT * HZ);
 
-       if(ret < 0) {
+       if (ret < 0) {
                dev_err(line6->ifcdev, "read failed (error %d)\n", ret);
                return ret;
        }
@@ -509,34 +525,42 @@ int line6_read_data(struct usb_line6 *line6, int address, void *data, size_t dat
 /*
        Write data to device.
 */
-int line6_write_data(struct usb_line6 *line6, int address, void *data, size_t datalen)
+int line6_write_data(struct usb_line6 *line6, int address, void *data,
+                    size_t datalen)
 {
        struct usb_device *usbdev = line6->usbdev;
        int ret;
        unsigned char status;
 
-       ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev,0), 0x67,
-                                                                       USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
-                                                                       0x0022, address, data, datalen, LINE6_TIMEOUT * HZ);
+       ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x67,
+                             USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+                             0x0022, address, data, datalen,
+                             LINE6_TIMEOUT * HZ);
 
-       if(ret < 0) {
-               dev_err(line6->ifcdev, "write request failed (error %d)\n", ret);
+       if (ret < 0) {
+               dev_err(line6->ifcdev,
+                       "write request failed (error %d)\n", ret);
                return ret;
        }
 
        do {
-               ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev,0), 0x67,
-                                                                               USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
-                                                                               0x0012, 0x0000, &status, 1, LINE6_TIMEOUT * HZ);
-
-               if(ret < 0) {
-                       dev_err(line6->ifcdev, "receiving status failed (error %d)\n", ret);
+               ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
+                                     0x67,
+                                     USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+                                     USB_DIR_IN,
+                                     0x0012, 0x0000,
+                                     &status, 1, LINE6_TIMEOUT * HZ);
+
+               if (ret < 0) {
+                       dev_err(line6->ifcdev,
+                               "receiving status failed (error %d)\n", ret);
                        return ret;
                }
        }
-       while(status == 0xff);
+       while (status == 0xff)
+               ;
 
-       if(status != 0) {
+       if (status != 0) {
                dev_err(line6->ifcdev, "write failed (error %d)\n", ret);
                return -EINVAL;
        }
@@ -591,16 +615,19 @@ ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr,
 static void line6_destruct(struct usb_interface *interface)
 {
        struct usb_line6 *line6;
-       if(interface == NULL) return;
+
+       if (interface == NULL)
+               return;
        line6 = usb_get_intfdata(interface);
-       if(line6 == NULL) return;
+       if (line6 == NULL)
+               return;
 
        /* free buffer memory first: */
-       if(line6->buffer_message != NULL) kfree(line6->buffer_message);
-       if(line6->buffer_listen != NULL) kfree(line6->buffer_listen);
+       kfree(line6->buffer_message);
+       kfree(line6->buffer_listen);
 
        /* then free URBs: */
-       if(line6->urb_listen != NULL) usb_free_urb(line6->urb_listen);
+       usb_free_urb(line6->urb_listen);
 
        /* make sure the device isn't destructed twice: */
        usb_set_intfdata(interface, NULL);
@@ -613,11 +640,11 @@ static void line6_list_devices(void)
 {
        int i;
 
-       for(i = 0; i < LINE6_MAX_DEVICES; ++i) {
+       for (i = 0; i < LINE6_MAX_DEVICES; ++i) {
                struct usb_line6 *dev = line6_devices[i];
                printk(KERN_INFO "Line6 device %d: ", i);
 
-               if(dev == NULL)
+               if (dev == NULL)
                        printk("(not used)\n");
                else
                        printk("%s:%d\n", dev->properties->name, dev->interface_number);
@@ -640,33 +667,35 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
        int ep_read = 0, ep_write = 0;
        int ret;
 
-       if(interface == NULL) return -ENODEV;
+       if (interface == NULL)
+               return -ENODEV;
        usbdev = interface_to_usbdev(interface);
-       if(usbdev == NULL) return -ENODEV;
+       if (usbdev == NULL)
+               return -ENODEV;
 
        /* increment reference counters: */
        usb_get_intf(interface);
        usb_get_dev(usbdev);
 
        /* we don't handle multiple configurations */
-       if(usbdev->descriptor.bNumConfigurations != 1)
+       if (usbdev->descriptor.bNumConfigurations != 1)
                return -ENODEV;
 
        /* check vendor and product id */
-       for(devtype = sizeof(line6_id_table) / sizeof(line6_id_table[0]) - 1; devtype--;)
-               if((le16_to_cpu(usbdev->descriptor.idVendor) == line6_id_table[devtype].idVendor) &&
+       for (devtype = sizeof(line6_id_table) / sizeof(line6_id_table[0]) - 1; devtype--;)
+               if ((le16_to_cpu(usbdev->descriptor.idVendor) == line6_id_table[devtype].idVendor) &&
                         (le16_to_cpu(usbdev->descriptor.idProduct) == line6_id_table[devtype].idProduct))
                        break;
 
-       if(devtype < 0)
+       if (devtype < 0)
                return -ENODEV;
 
        /* find free slot in device table: */
-       for(devnum = 0; devnum < LINE6_MAX_DEVICES; ++devnum)
-               if(line6_devices[devnum] == NULL)
+       for (devnum = 0; devnum < LINE6_MAX_DEVICES; ++devnum)
+               if (line6_devices[devnum] == NULL)
                        break;
 
-       if(devnum == LINE6_MAX_DEVICES)
+       if (devnum == LINE6_MAX_DEVICES)
                return -ENODEV;
 
        /* initialize device info: */
@@ -677,7 +706,7 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
        /* query interface number */
        interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
 
-       switch(product) {
+       switch (product) {
        case LINE6_DEVID_BASSPODXTLIVE:
        case LINE6_DEVID_POCKETPOD:
        case LINE6_DEVID_PODXTLIVE:
@@ -687,10 +716,15 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 
        case LINE6_DEVID_PODX3:
        case LINE6_DEVID_PODX3LIVE:
-               switch(interface_number) {
-               case 0: alternate = 1; break;
-               case 1: alternate = 0; break;
-               default: MISSING_CASE;
+               switch (interface_number) {
+               case 0:
+                       alternate = 1;
+                       break;
+               case 1:
+                       alternate = 0;
+                       break;
+               default:
+                       MISSING_CASE;
                }
                break;
 
@@ -703,15 +737,21 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 
        case LINE6_DEVID_TONEPORT_GX:
        case LINE6_DEVID_GUITARPORT:
-               alternate = 2;  // 1..4 seem to be ok
+               alternate = 2;  /* 1..4 seem to be ok */
                break;
 
        case LINE6_DEVID_TONEPORT_UX1:
        case LINE6_DEVID_TONEPORT_UX2:
-               switch(interface_number) {
-               case 0: alternate = 2; break; /* defaults to 44.1kHz, 16-bit */
-               case 1: alternate = 0; break;
-               default: MISSING_CASE;
+               switch (interface_number) {
+               case 0:
+                       /* defaults to 44.1kHz, 16-bit */
+                       alternate = 2;
+                       break;
+               case 1:
+                       alternate = 0;
+                       break;
+               default:
+                       MISSING_CASE;
                }
                break;
 
@@ -720,13 +760,14 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
                return -ENODEV;
        }
 
-       if((ret = usb_set_interface(usbdev, interface_number, alternate)) < 0) {
+       ret = usb_set_interface(usbdev, interface_number, alternate);
+       if (ret < 0) {
                dev_err(&interface->dev, "set_interface failed\n");
                return ret;
        }
 
        /* initialize device data based on product id: */
-       switch(product) {
+       switch (product) {
        case LINE6_DEVID_BASSPODXT:
        case LINE6_DEVID_BASSPODXTLIVE:
        case LINE6_DEVID_BASSPODXTPRO:
@@ -755,7 +796,7 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
                break;
 
        case LINE6_DEVID_PODXTLIVE:
-               switch(interface_number) {
+               switch (interface_number) {
                case PODXTLIVE_INTERFACE_POD:
                        size = sizeof(struct usb_line6_pod);
                        ep_read  = 0x84;
@@ -784,14 +825,14 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
                return -ENODEV;
        }
 
-       if(size == 0) {
+       if (size == 0) {
                dev_err(line6->ifcdev, "driver bug: interface data size not set\n");
                return -ENODEV;
        }
 
        line6 = kzalloc(size, GFP_KERNEL);
 
-       if(line6 == NULL) {
+       if (line6 == NULL) {
                dev_err(&interface->dev, "Out of memory\n");
                return -ENOMEM;
        }
@@ -811,11 +852,10 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
                unsigned epnum = usb_pipeendpoint(usb_rcvintpipe(usbdev, ep_read));
                ep = usbdev->ep_in[epnum];
 
-               if(ep != NULL) {
+               if (ep != NULL) {
                        line6->interval = ep->desc.bInterval;
                        line6->max_packet_size = le16_to_cpu(ep->desc.wMaxPacketSize);
-               }
-               else {
+               } else {
                        line6->interval = LINE6_FALLBACK_INTERVAL;
                        line6->max_packet_size = LINE6_FALLBACK_MAXPACKETSIZE;
                        dev_err(line6->ifcdev, "endpoint not available, using fallback values");
@@ -824,11 +864,11 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 
        usb_set_intfdata(interface, line6);
 
-       if(properties->capabilities & LINE6_BIT_CONTROL) {
+       if (properties->capabilities & LINE6_BIT_CONTROL) {
                /* initialize USB buffers: */
                line6->buffer_listen = kmalloc(LINE6_BUFSIZE_LISTEN, GFP_KERNEL);
 
-               if(line6->buffer_listen == NULL) {
+               if (line6->buffer_listen == NULL) {
                        dev_err(&interface->dev, "Out of memory\n");
                        line6_destruct(interface);
                        return -ENOMEM;
@@ -836,7 +876,7 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 
                line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL);
 
-               if(line6->buffer_message == NULL) {
+               if (line6->buffer_message == NULL) {
                        dev_err(&interface->dev, "Out of memory\n");
                        line6_destruct(interface);
                        return -ENOMEM;
@@ -844,21 +884,23 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
 
                line6->urb_listen = usb_alloc_urb(0, GFP_KERNEL);
 
-               if(line6->urb_listen == NULL) {
+               if (line6->urb_listen == NULL) {
                        dev_err(&interface->dev, "Out of memory\n");
                        line6_destruct(interface);
                        return -ENOMEM;
                }
 
-               if((ret = line6_start_listen(line6)) < 0) {
-                       dev_err(&interface->dev, " line6_probe: usb_submit_urb failed\n");
+               ret = line6_start_listen(line6);
+               if (ret < 0) {
+                       dev_err(&interface->dev, "%s: usb_submit_urb failed\n",
+                               __func__);
                        line6_destruct(interface);
                        return ret;
                }
        }
 
        /* initialize device data based on product id: */
-       switch(product) {
+       switch (product) {
        case LINE6_DEVID_BASSPODXT:
        case LINE6_DEVID_BASSPODXTLIVE:
        case LINE6_DEVID_BASSPODXTPRO:
@@ -871,7 +913,7 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
                break;
 
        case LINE6_DEVID_PODXTLIVE:
-               switch(interface_number) {
+               switch (interface_number) {
                case PODXTLIVE_INTERFACE_POD:
                        ret = pod_init(interface, (struct usb_line6_pod *)line6);
                        break;
@@ -881,7 +923,9 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
                        break;
 
                default:
-                       dev_err(&interface->dev, "PODxt Live interface %d not supported\n", interface_number);
+                       dev_err(&interface->dev,
+                               "PODxt Live interface %d not supported\n",
+                               interface_number);
                        ret = -ENODEV;
                }
 
@@ -903,17 +947,20 @@ static int line6_probe(struct usb_interface *interface, const struct usb_device_
                ret = -ENODEV;
        }
 
-       if(ret < 0) {
+       if (ret < 0) {
                line6_destruct(interface);
                return ret;
        }
 
-       if((ret = sysfs_create_link(&interface->dev.kobj, &usbdev->dev.kobj, "usb_device")) < 0) {
+       ret = sysfs_create_link(&interface->dev.kobj, &usbdev->dev.kobj,
+                               "usb_device");
+       if (ret < 0) {
                line6_destruct(interface);
                return ret;
        }
 
-       dev_info(&interface->dev, "Line6 %s now attached\n", line6->properties->name);
+       dev_info(&interface->dev, "Line6 %s now attached\n",
+                line6->properties->name);
        line6_devices[devnum] = line6;
        line6_list_devices();
        return ret;
@@ -928,22 +975,26 @@ static void line6_disconnect(struct usb_interface *interface)
        struct usb_device *usbdev;
        int interface_number, i;
 
-       if(interface == NULL) return;
+       if (interface == NULL)
+               return;
        usbdev = interface_to_usbdev(interface);
-       if(usbdev == NULL) return;
+       if (usbdev == NULL)
+               return;
 
        sysfs_remove_link(&interface->dev.kobj, "usb_device");
 
        interface_number = interface->cur_altsetting->desc.bInterfaceNumber;
        line6 = usb_get_intfdata(interface);
 
-       if(line6 != NULL) {
-               if(line6->urb_listen != NULL) usb_kill_urb(line6->urb_listen);
+       if (line6 != NULL) {
+               if (line6->urb_listen != NULL)
+                       usb_kill_urb(line6->urb_listen);
 
-               if(usbdev != line6->usbdev)
-                       dev_err(line6->ifcdev, "driver bug: inconsistent usb device\n");
+               if (usbdev != line6->usbdev)
+                       dev_err(line6->ifcdev,
+                               "driver bug: inconsistent usb device\n");
 
-               switch(line6->usbdev->descriptor.idProduct) {
+               switch (line6->usbdev->descriptor.idProduct) {
                case LINE6_DEVID_BASSPODXT:
                case LINE6_DEVID_BASSPODXTLIVE:
                case LINE6_DEVID_BASSPODXTPRO:
@@ -956,7 +1007,7 @@ static void line6_disconnect(struct usb_interface *interface)
                        break;
 
                case LINE6_DEVID_PODXTLIVE:
-                       switch(interface_number) {
+                       switch (interface_number) {
                        case PODXTLIVE_INTERFACE_POD:
                                pod_disconnect(interface);
                                break;
@@ -985,8 +1036,8 @@ static void line6_disconnect(struct usb_interface *interface)
 
                dev_info(&interface->dev, "Line6 %s now disconnected\n", line6->properties->name);
 
-               for(i = LINE6_MAX_DEVICES; i--;)
-                       if(line6_devices[i] == line6)
+               for (i = LINE6_MAX_DEVICES; i--;)
+                       if (line6_devices[i] == line6)
                                line6_devices[i] = NULL;
        }
 
@@ -1013,7 +1064,8 @@ static int __init line6_init(void)
 {
        int i, retval;
 
-       printk("%s driver version %s%s\n", DRIVER_NAME, DRIVER_VERSION, DRIVER_REVISION);
+       printk(KERN_INFO "%s driver version %s%s\n",
+              DRIVER_NAME, DRIVER_VERSION, DRIVER_REVISION);
        line6_workqueue = create_workqueue(DRIVER_NAME);
 
        if (line6_workqueue == NULL) {
@@ -1021,12 +1073,12 @@ static int __init line6_init(void)
                return -EINVAL;
        }
 
-       for(i = LINE6_MAX_DEVICES; i--;)
+       for (i = LINE6_MAX_DEVICES; i--;)
                line6_devices[i] = NULL;
 
        retval = usb_register(&line6_driver);
 
-       if(retval)
+       if (retval)
                err("usb_register failed. Error number %d", retval);
 
        return retval;