Fixed problems on PRS200 board caused by adding splash screen on MCC200

diff --git a/CHANGELOG b/CHANGELOG
index 5e6e1f3..5743bbc 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Fixed problems on PRS200 board caused by adding splash screen on MCC200
+
 * Extended README entry on coding style
 
 * Added another example showing simple interrupt interception.

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index e95d68b..0c935bf 100644 (file)
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -37,12 +37,12 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
+#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
+#define BOOTFLAG_WARM          0x02    /* Software reboot                      */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs                     */
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs                     */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value        */
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value        */
 #endif
 
 /*
@@ -92,7 +92,7 @@
 
 /* USB */
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD            CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 
 /*
@@ -167,7 +167,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133               /* define for 133MHz speed */
+#define CFG_IPBSPEED_133               /* define for 133MHz speed */
 
 /*
  * I2C configuration
@@ -183,9 +183,9 @@
  * TEXT base always at 0xFFF00000
  * ENV_ADDR always at  0xFFF40000
  * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!)
- *               0xFE000000 for 32 MB
- *               0xFF000000 for 16 MB
- *               0xFF800000 for  8 MB
+ *              0xFE000000 for 32 MB
+ *              0xFF000000 for 16 MB
+ *              0xFF800000 for  8 MB
  */
 #define CFG_FLASH_BASE         0xfc000000
 #define CFG_FLASH_SIZE         0x04000000
@@ -207,9 +207,9 @@
 #define CFG_FLASH_EMPTY_INFO           /* print 'E' for empty sector on flinfo */
 #define CFG_FLASH_QUIET_TEST   1       /* don't warn upon unknown flash        */
 
-#define CFG_ENV_IS_IN_FLASH     1      /* use FLASH for environment vars       */
+#define CFG_ENV_IS_IN_FLASH    1       /* use FLASH for environment vars       */
 
-#define CFG_ENV_SECT_SIZE      0x40000         /* size of one complete sector  */
+#define CFG_ENV_SECT_SIZE      0x40000 /* size of one complete sector  */
 #define CFG_ENV_ADDR           (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 #define        CFG_ENV_SIZE            0x2000  /* Total Size of Environment Sector     */
 
@@ -239,7 +239,7 @@
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET     CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CFG_MONITOR_BASE       TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #   define CFG_RAMBOOT         1
 #endif
@@ -261,11 +261,14 @@
 /*
  * LCD Splash Screen
  */
+#if !defined(CONFIG_PRS200)
 #define CONFIG_LCD             1
+#endif
+
 #if defined(CONFIG_LCD)
 #define CONFIG_SPLASH_SCREEN   1
 #define CFG_CONSOLE_IS_IN_ENV  1
-#define LCD_BPP                LCD_MONOCHROME
+#define LCD_BPP                        LCD_MONOCHROME
 #endif
 
 /*
@@ -283,18 +286,18 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP                   /* undef to save memory     */
-#define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
+#define CFG_LONGHELP                   /* undef to save memory         */
+#define CFG_PROMPT             "=> "   /* Monitor Command Prompt       */
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
+#define CFG_CBSIZE             1024    /* Console I/O Buffer Size      */
 #else
-#define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
+#define CFG_CBSIZE             256     /* Console I/O Buffer Size      */
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size    */
 #define CFG_MAXARGS            16              /* max number of command args   */
 #define CFG_BARGSIZE           CFG_CBSIZE      /* Boot Argument Buffer Size    */
 
-#define CFG_MEMTEST_START      0x00100000      /* memtest works on */
+#define CFG_MEMTEST_START      0x00100000      /* memtest works on     */
 #define CFG_MEMTEST_END                0x00f00000      /* 1 ... 15 MB in DRAM  */
 
 #define CFG_LOAD_ADDR          0x100000        /* default load address */