--- /dev/null
+/*
+ * Copyright 2004-2008 Freescale Semiconductor, Inc.
+ * Copyright 2009 Semihalf.
+ * (C) Copyright 2009 Stefan Roese <sr@denx.de>
+ *
+ * Based on original driver from Freescale Semiconductor
+ * written by John Rigby <jrigby@freescale.com> on basis
+ * of drivers/mtd/nand/mxc_nand.c. Reworked and extended
+ * Piotr Ziecik <kosmo@semihalf.com>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <malloc.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/compat.h>
+
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <nand.h>
+
+#define DRV_NAME "mpc5121_nfc"
+
+/* Timeouts */
+#define NFC_RESET_TIMEOUT 1000 /* 1 ms */
+#define NFC_TIMEOUT 2000 /* 2000 us */
+
+/* Addresses for NFC MAIN RAM BUFFER areas */
+#define NFC_MAIN_AREA(n) ((n) * 0x200)
+
+/* Addresses for NFC SPARE BUFFER areas */
+#define NFC_SPARE_BUFFERS 8
+#define NFC_SPARE_LEN 0x40
+#define NFC_SPARE_AREA(n) (0x1000 + ((n) * NFC_SPARE_LEN))
+
+/* MPC5121 NFC registers */
+#define NFC_BUF_ADDR 0x1E04
+#define NFC_FLASH_ADDR 0x1E06
+#define NFC_FLASH_CMD 0x1E08
+#define NFC_CONFIG 0x1E0A
+#define NFC_ECC_STATUS1 0x1E0C
+#define NFC_ECC_STATUS2 0x1E0E
+#define NFC_SPAS 0x1E10
+#define NFC_WRPROT 0x1E12
+#define NFC_NF_WRPRST 0x1E18
+#define NFC_CONFIG1 0x1E1A
+#define NFC_CONFIG2 0x1E1C
+#define NFC_UNLOCKSTART_BLK0 0x1E20
+#define NFC_UNLOCKEND_BLK0 0x1E22
+#define NFC_UNLOCKSTART_BLK1 0x1E24
+#define NFC_UNLOCKEND_BLK1 0x1E26
+#define NFC_UNLOCKSTART_BLK2 0x1E28
+#define NFC_UNLOCKEND_BLK2 0x1E2A
+#define NFC_UNLOCKSTART_BLK3 0x1E2C
+#define NFC_UNLOCKEND_BLK3 0x1E2E
+
+/* Bit Definitions: NFC_BUF_ADDR */
+#define NFC_RBA_MASK (7 << 0)
+#define NFC_ACTIVE_CS_SHIFT 5
+#define NFC_ACTIVE_CS_MASK (3 << NFC_ACTIVE_CS_SHIFT)
+
+/* Bit Definitions: NFC_CONFIG */
+#define NFC_BLS_UNLOCKED (1 << 1)
+
+/* Bit Definitions: NFC_CONFIG1 */
+#define NFC_ECC_4BIT (1 << 0)
+#define NFC_FULL_PAGE_DMA (1 << 1)
+#define NFC_SPARE_ONLY (1 << 2)
+#define NFC_ECC_ENABLE (1 << 3)
+#define NFC_INT_MASK (1 << 4)
+#define NFC_BIG_ENDIAN (1 << 5)
+#define NFC_RESET (1 << 6)
+#define NFC_CE (1 << 7)
+#define NFC_ONE_CYCLE (1 << 8)
+#define NFC_PPB_32 (0 << 9)
+#define NFC_PPB_64 (1 << 9)
+#define NFC_PPB_128 (2 << 9)
+#define NFC_PPB_256 (3 << 9)
+#define NFC_PPB_MASK (3 << 9)
+#define NFC_FULL_PAGE_INT (1 << 11)
+
+/* Bit Definitions: NFC_CONFIG2 */
+#define NFC_COMMAND (1 << 0)
+#define NFC_ADDRESS (1 << 1)
+#define NFC_INPUT (1 << 2)
+#define NFC_OUTPUT (1 << 3)
+#define NFC_ID (1 << 4)
+#define NFC_STATUS (1 << 5)
+#define NFC_CMD_FAIL (1 << 15)
+#define NFC_INT (1 << 15)
+
+/* Bit Definitions: NFC_WRPROT */
+#define NFC_WPC_LOCK_TIGHT (1 << 0)
+#define NFC_WPC_LOCK (1 << 1)
+#define NFC_WPC_UNLOCK (1 << 2)
+
+struct mpc5121_nfc_prv {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ int irq;
+ void __iomem *regs;
+ struct clk *clk;
+ uint column;
+ int spareonly;
+ int chipsel;
+};
+
+int mpc5121_nfc_chip = 0;
+
+static void mpc5121_nfc_done(struct mtd_info *mtd);
+
+/* Read NFC register */
+static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ return in_be16(prv->regs + reg);
+}
+
+/* Write NFC register */
+static inline void nfc_write(struct mtd_info *mtd, uint reg, u16 val)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ out_be16(prv->regs + reg, val);
+}
+
+/* Set bits in NFC register */
+static inline void nfc_set(struct mtd_info *mtd, uint reg, u16 bits)
+{
+ nfc_write(mtd, reg, nfc_read(mtd, reg) | bits);
+}
+
+/* Clear bits in NFC register */
+static inline void nfc_clear(struct mtd_info *mtd, uint reg, u16 bits)
+{
+ nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits);
+}
+
+/* Invoke address cycle */
+static inline void mpc5121_nfc_send_addr(struct mtd_info *mtd, u16 addr)
+{
+ nfc_write(mtd, NFC_FLASH_ADDR, addr);
+ nfc_write(mtd, NFC_CONFIG2, NFC_ADDRESS);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Invoke command cycle */
+static inline void mpc5121_nfc_send_cmd(struct mtd_info *mtd, u16 cmd)
+{
+ nfc_write(mtd, NFC_FLASH_CMD, cmd);
+ nfc_write(mtd, NFC_CONFIG2, NFC_COMMAND);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Send data from NFC buffers to NAND flash */
+static inline void mpc5121_nfc_send_prog_page(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_INPUT);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Receive data from NAND flash */
+static inline void mpc5121_nfc_send_read_page(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_OUTPUT);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Receive ID from NAND flash */
+static inline void mpc5121_nfc_send_read_id(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_ID);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Receive status from NAND flash */
+static inline void mpc5121_nfc_send_read_status(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_STATUS);
+ mpc5121_nfc_done(mtd);
+}
+
+static void mpc5121_nfc_done(struct mtd_info *mtd)
+{
+ int max_retries = NFC_TIMEOUT;
+
+ while (1) {
+ max_retries--;
+ if (nfc_read(mtd, NFC_CONFIG2) & NFC_INT)
+ break;
+ udelay(1);
+ }
+
+ if (max_retries <= 0)
+ printk(KERN_WARNING DRV_NAME
+ ": Timeout while waiting for completion.\n");
+}
+
+/* Do address cycle(s) */
+static void mpc5121_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
+{
+ struct nand_chip *chip = mtd->priv;
+ u32 pagemask = chip->pagemask;
+
+ if (column != -1) {
+ mpc5121_nfc_send_addr(mtd, column);
+ if (mtd->writesize > 512)
+ mpc5121_nfc_send_addr(mtd, column >> 8);
+ }
+
+ if (page != -1) {
+ do {
+ mpc5121_nfc_send_addr(mtd, page & 0xFF);
+ page >>= 8;
+ pagemask >>= 8;
+ } while (pagemask);
+ }
+}
+
+/* Control chip select signals */
+
+/*
+ * Selecting the active device:
+ *
+ * This is different than the linux version. Switching between chips
+ * is done via board_nand_select_device(). The Linux select_chip
+ * function used here in U-Boot has only 2 valid chip numbers:
+ * 0 select
+ * -1 deselect
+ */
+
+/*
+ * Implement it as a weak default, so that boards with a specific
+ * chip-select routine can use their own function.
+ */
+void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip < 0) {
+ nfc_clear(mtd, NFC_CONFIG1, NFC_CE);
+ return;
+ }
+
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_ACTIVE_CS_MASK);
+ nfc_set(mtd, NFC_BUF_ADDR, (chip << NFC_ACTIVE_CS_SHIFT) &
+ NFC_ACTIVE_CS_MASK);
+ nfc_set(mtd, NFC_CONFIG1, NFC_CE);
+}
+void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
+ __attribute__((weak, alias("__mpc5121_nfc_select_chip")));
+
+void board_nand_select_device(struct nand_chip *nand, int chip)
+{
+ /*
+ * Only save this chip number in global variable here. This
+ * will be used later in mpc5121_nfc_select_chip().
+ */
+ mpc5121_nfc_chip = chip;
+}
+
+/* Read NAND Ready/Busy signal */
+static int mpc5121_nfc_dev_ready(struct mtd_info *mtd)
+{
+ /*
+ * NFC handles ready/busy signal internally. Therefore, this function
+ * always returns status as ready.
+ */
+ return 1;
+}
+
+/* Write command to NAND flash */
+static void mpc5121_nfc_command(struct mtd_info *mtd, unsigned command,
+ int column, int page)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ prv->column = (column >= 0) ? column : 0;
+ prv->spareonly = 0;
+
+ switch (command) {
+ case NAND_CMD_PAGEPROG:
+ mpc5121_nfc_send_prog_page(mtd);
+ break;
+ /*
+ * NFC does not support sub-page reads and writes,
+ * so emulate them using full page transfers.
+ */
+ case NAND_CMD_READ0:
+ column = 0;
+ break;
+
+ case NAND_CMD_READ1:
+ prv->column += 256;
+ command = NAND_CMD_READ0;
+ column = 0;
+ break;
+
+ case NAND_CMD_READOOB:
+ prv->spareonly = 1;
+ command = NAND_CMD_READ0;
+ column = 0;
+ break;
+
+ case NAND_CMD_SEQIN:
+ mpc5121_nfc_command(mtd, NAND_CMD_READ0, column, page);
+ column = 0;
+ break;
+
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_READID:
+ case NAND_CMD_STATUS:
+ break;
+
+ default:
+ return;
+ }
+
+ mpc5121_nfc_send_cmd(mtd, command);
+ mpc5121_nfc_addr_cycle(mtd, column, page);
+
+ switch (command) {
+ case NAND_CMD_READ0:
+ if (mtd->writesize > 512)
+ mpc5121_nfc_send_cmd(mtd, NAND_CMD_READSTART);
+ mpc5121_nfc_send_read_page(mtd);
+ break;
+
+ case NAND_CMD_READID:
+ mpc5121_nfc_send_read_id(mtd);
+ break;
+
+ case NAND_CMD_STATUS:
+ mpc5121_nfc_send_read_status(mtd);
+ if (chip->options & NAND_BUSWIDTH_16)
+ prv->column = 1;
+ else
+ prv->column = 0;
+ break;
+ }
+}
+
+/* Copy data from/to NFC spare buffers. */
+static void mpc5121_nfc_copy_spare(struct mtd_info *mtd, uint offset,
+ u8 * buffer, uint size, int wr)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mpc5121_nfc_prv *prv = nand->priv;
+ uint o, s, sbsize, blksize;
+
+ /*
+ * NAND spare area is available through NFC spare buffers.
+ * The NFC divides spare area into (page_size / 512) chunks.
+ * Each chunk is placed into separate spare memory area, using
+ * first (spare_size / num_of_chunks) bytes of the buffer.
+ *
+ * For NAND device in which the spare area is not divided fully
+ * by the number of chunks, number of used bytes in each spare
+ * buffer is rounded down to the nearest even number of bytes,
+ * and all remaining bytes are added to the last used spare area.
+ *
+ * For more information read section 26.6.10 of MPC5121e
+ * Microcontroller Reference Manual, Rev. 3.
+ */
+
+ /* Calculate number of valid bytes in each spare buffer */
+ sbsize = (mtd->oobsize / (mtd->writesize / 512)) & ~1;
+
+ while (size) {
+ /* Calculate spare buffer number */
+ s = offset / sbsize;
+ if (s > NFC_SPARE_BUFFERS - 1)
+ s = NFC_SPARE_BUFFERS - 1;
+
+ /*
+ * Calculate offset to requested data block in selected spare
+ * buffer and its size.
+ */
+ o = offset - (s * sbsize);
+ blksize = min(sbsize - o, size);
+
+ if (wr)
+ memcpy_toio(prv->regs + NFC_SPARE_AREA(s) + o,
+ buffer, blksize);
+ else
+ memcpy_fromio(buffer,
+ prv->regs + NFC_SPARE_AREA(s) + o,
+ blksize);
+
+ buffer += blksize;
+ offset += blksize;
+ size -= blksize;
+ };
+}
+
+/* Copy data from/to NFC main and spare buffers */
+static void mpc5121_nfc_buf_copy(struct mtd_info *mtd, u_char * buf, int len,
+ int wr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+ uint c = prv->column;
+ uint l;
+
+ /* Handle spare area access */
+ if (prv->spareonly || c >= mtd->writesize) {
+ /* Calculate offset from beginning of spare area */
+ if (c >= mtd->writesize)
+ c -= mtd->writesize;
+
+ prv->column += len;
+ mpc5121_nfc_copy_spare(mtd, c, buf, len, wr);
+ return;
+ }
+
+ /*
+ * Handle main area access - limit copy length to prevent
+ * crossing main/spare boundary.
+ */
+ l = min((uint) len, mtd->writesize - c);
+ prv->column += l;
+
+ if (wr)
+ memcpy_toio(prv->regs + NFC_MAIN_AREA(0) + c, buf, l);
+ else
+ memcpy_fromio(buf, prv->regs + NFC_MAIN_AREA(0) + c, l);
+
+ /* Handle crossing main/spare boundary */
+ if (l != len) {
+ buf += l;
+ len -= l;
+ mpc5121_nfc_buf_copy(mtd, buf, len, wr);
+ }
+}
+
+/* Read data from NFC buffers */
+static void mpc5121_nfc_read_buf(struct mtd_info *mtd, u_char * buf, int len)
+{
+ mpc5121_nfc_buf_copy(mtd, buf, len, 0);
+}
+
+/* Write data to NFC buffers */
+static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
+ const u_char * buf, int len)
+{
+ mpc5121_nfc_buf_copy(mtd, (u_char *) buf, len, 1);
+}
+
+/* Compare buffer with NAND flash */
+static int mpc5121_nfc_verify_buf(struct mtd_info *mtd,
+ const u_char * buf, int len)
+{
+ u_char tmp[256];
+ uint bsize;
+
+ while (len) {
+ bsize = min(len, 256);
+ mpc5121_nfc_read_buf(mtd, tmp, bsize);
+
+ if (memcmp(buf, tmp, bsize))
+ return 1;
+
+ buf += bsize;
+ len -= bsize;
+ }
+
+ return 0;
+}
+
+/* Read byte from NFC buffers */
+static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
+{
+ u8 tmp;
+
+ mpc5121_nfc_read_buf(mtd, &tmp, sizeof(tmp));
+
+ return tmp;
+}
+
+/* Read word from NFC buffers */
+static u16 mpc5121_nfc_read_word(struct mtd_info *mtd)
+{
+ u16 tmp;
+
+ mpc5121_nfc_read_buf(mtd, (u_char *) & tmp, sizeof(tmp));
+
+ return tmp;
+}
+
+/*
+ * Read NFC configuration from Reset Config Word
+ *
+ * NFC is configured during reset in basis of information stored
+ * in Reset Config Word. There is no other way to set NAND block
+ * size, spare size and bus width.
+ */
+static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
+{
+ immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+ struct nand_chip *chip = mtd->priv;
+ uint rcw_pagesize = 0;
+ uint rcw_sparesize = 0;
+ uint rcw_width;
+ uint rcwh;
+ uint romloc, ps;
+
+ rcwh = in_be32(&(im->reset.rcwh));
+
+ /* Bit 6: NFC bus width */
+ rcw_width = ((rcwh >> 6) & 0x1) ? 2 : 1;
+
+ /* Bit 7: NFC Page/Spare size */
+ ps = (rcwh >> 7) & 0x1;
+
+ /* Bits [22:21]: ROM Location */
+ romloc = (rcwh >> 21) & 0x3;
+
+ /* Decode RCW bits */
+ switch ((ps << 2) | romloc) {
+ case 0x00:
+ case 0x01:
+ rcw_pagesize = 512;
+ rcw_sparesize = 16;
+ break;
+ case 0x02:
+ case 0x03:
+ rcw_pagesize = 4096;
+ rcw_sparesize = 128;
+ break;
+ case 0x04:
+ case 0x05:
+ rcw_pagesize = 2048;
+ rcw_sparesize = 64;
+ break;
+ case 0x06:
+ case 0x07:
+ rcw_pagesize = 4096;
+ rcw_sparesize = 218;
+ break;
+ }
+
+ mtd->writesize = rcw_pagesize;
+ mtd->oobsize = rcw_sparesize;
+ if (rcw_width == 2)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ debug(KERN_NOTICE DRV_NAME ": Configured for "
+ "%u-bit NAND, page size %u with %u spare.\n",
+ rcw_width * 8, rcw_pagesize, rcw_sparesize);
+ return 0;
+}
+
+int board_nand_init(struct nand_chip *chip)
+{
+ struct mpc5121_nfc_prv *prv;
+ struct mtd_info *mtd;
+ int resettime = 0;
+ int retval = 0;
+ int rev;
+ static int chip_nr = 0;
+
+ /*
+ * Check SoC revision. This driver supports only NFC
+ * in MPC5121 revision 2.
+ */
+ rev = (mfspr(SPRN_SVR) >> 4) & 0xF;
+ if (rev != 2) {
+ printk(KERN_ERR DRV_NAME
+ ": SoC revision %u is not supported!\n", rev);
+ return -ENXIO;
+ }
+
+ prv = malloc(sizeof(*prv));
+ if (!prv) {
+ printk(KERN_ERR DRV_NAME ": Memory exhausted!\n");
+ return -ENOMEM;
+ }
+
+ mtd = &nand_info[chip_nr++];
+ mtd->priv = chip;
+ chip->priv = prv;
+
+ /* Read NFC configuration from Reset Config Word */
+ retval = mpc5121_nfc_read_hw_config(mtd);
+ if (retval) {
+ printk(KERN_ERR DRV_NAME ": Unable to read NFC config!\n");
+ return retval;
+ }
+
+ prv->regs = (void __iomem *)CONFIG_SYS_NAND_BASE;
+ chip->dev_ready = mpc5121_nfc_dev_ready;
+ chip->cmdfunc = mpc5121_nfc_command;
+ chip->read_byte = mpc5121_nfc_read_byte;
+ chip->read_word = mpc5121_nfc_read_word;
+ chip->read_buf = mpc5121_nfc_read_buf;
+ chip->write_buf = mpc5121_nfc_write_buf;
+ chip->verify_buf = mpc5121_nfc_verify_buf;
+ chip->select_chip = mpc5121_nfc_select_chip;
+ chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+ chip->ecc.mode = NAND_ECC_SOFT;
+
+ /* Reset NAND Flash controller */
+ nfc_set(mtd, NFC_CONFIG1, NFC_RESET);
+ while (nfc_read(mtd, NFC_CONFIG1) & NFC_RESET) {
+ if (resettime++ >= NFC_RESET_TIMEOUT) {
+ printk(KERN_ERR DRV_NAME
+ ": Timeout while resetting NFC!\n");
+ retval = -EINVAL;
+ goto error;
+ }
+
+ udelay(1);
+ }
+
+ /* Enable write to NFC memory */
+ nfc_write(mtd, NFC_CONFIG, NFC_BLS_UNLOCKED);
+
+ /* Enable write to all NAND pages */
+ nfc_write(mtd, NFC_UNLOCKSTART_BLK0, 0x0000);
+ nfc_write(mtd, NFC_UNLOCKEND_BLK0, 0xFFFF);
+ nfc_write(mtd, NFC_WRPROT, NFC_WPC_UNLOCK);
+
+ /*
+ * Setup NFC:
+ * - Big Endian transfers,
+ * - Interrupt after full page read/write.
+ */
+ nfc_write(mtd, NFC_CONFIG1, NFC_BIG_ENDIAN | NFC_INT_MASK |
+ NFC_FULL_PAGE_INT);
+
+ /* Set spare area size */
+ nfc_write(mtd, NFC_SPAS, mtd->oobsize >> 1);
+
+ /* Detect NAND chips */
+ if (nand_scan(mtd, 1)) {
+ printk(KERN_ERR DRV_NAME ": NAND Flash not found !\n");
+ retval = -ENXIO;
+ goto error;
+ }
+
+ /* Set erase block size */
+ switch (mtd->erasesize / mtd->writesize) {
+ case 32:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_32);
+ break;
+
+ case 64:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_64);
+ break;
+
+ case 128:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_128);
+ break;
+
+ case 256:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_256);
+ break;
+
+ default:
+ printk(KERN_ERR DRV_NAME ": Unsupported NAND flash!\n");
+ retval = -ENXIO;
+ goto error;
+ }
+
+ return 0;
+error:
+ return retval;
+}
projects / kernel / u-boot.git / commitdiff