board: sl28: move DM_* configs to Kconfig

Move the CONFIG_DM_* from the defconfig to the TARGET_SL28 config.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8b40fc4..fa98c1a 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1605,6 +1605,25 @@ config TARGET_SL28
        select ARMV8_MULTIENTRY
        select SUPPORT_SPL
        select BINMAN
+       select DM
+       select DM_GPIO
+       select DM_I2C
+       select DM_MMC
+       select DM_SPI_FLASH
+       select DM_ETH
+       select DM_MDIO
+       select DM_PCI
+       select DM_RNG
+       select DM_RTC
+       select DM_SCSI
+       select DM_SPI
+       select DM_USB
+       select SPL_DM if SPL
+       select SPL_DM_SPI if SPL
+       select SPL_DM_SPI_FLASH if SPL
+       select SPL_DM_I2C if SPL
+       select SPL_DM_MMC if SPL
+       select SPL_DM_SERIAL if SPL
        help
          Support for Kontron SMARC-sAL28 board.
 

diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig
index 1c781e0..98718db 100644 (file)
--- a/configs/kontron_sl28_defconfig
+++ b/configs/kontron_sl28_defconfig
@@ -8,8 +8,6 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x3e0000
 CONFIG_ENV_SECT_SIZE=0x10000
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000
-CONFIG_DM_GPIO=y
-CONFIG_SPL_DM_SPI=y
 CONFIG_SPL_TEXT_BASE=0x18010000
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_SPL_SERIAL_SUPPORT=y
@@ -35,7 +33,6 @@ CONFIG_PCI_INIT_R=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_GREPENV=y
@@ -58,52 +55,38 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NETCONSOLE=y
-CONFIG_DM=y
-CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SATA_CEVA=y
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_FSL_DDR3=y
-CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_I2C_MUX=y
-CONFIG_DM_MMC=y
 CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y
-CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_UNLOCK_ALL is not set
 CONFIG_SPI_FLASH_WINBOND=y
 # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 CONFIG_PHYLIB=y
 CONFIG_PHY_ATHEROS=y
 CONFIG_PHY_FIXED=y
-CONFIG_DM_ETH=y
-CONFIG_DM_MDIO=y
 CONFIG_DM_DSA=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MSCC_FELIX_SWITCH=y
 CONFIG_NVME=y
 CONFIG_PCI=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_ECAM_GENERIC=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
-CONFIG_DM_RNG=y
-CONFIG_DM_RTC=y
 CONFIG_RTC_RV8803=y
 CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
-CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_NXP_FSPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
 # CONFIG_SPL_DM_USB is not set
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y