+++ /dev/null
-<manifest>
- <request>
- <domain name="_" />
- </request>
-</manifest>
+++ /dev/null
-pcm. !default {
- type asym
- playback.pcm {
- type hw
- card 0
- device 3
- }
- capture.pcm {
- type hw
- card 0
- device 0
- }
-}
-
-ctl. !default {
- type hw
- card 0
-}
-
-pcm. AIF2{
- type hw
- card 0
- device 1
- format S16_LE
- channels 2
- rate 8000
-}
-
-pcm. AIF3{
- type hw
- card 0
- device 2
- format S16_LE
- channels 2
- rate 8000
-}
-
-pcm. AIF4{
- type hw
- card 0
- device 4
- format S16_LE
- channels 2
- rate 44100
-}
-
-ctl. wm1811 {
- type hw
- card 0
-}
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
-## more information. Default values a commented out. Use either ; or # for
-## commenting.
-
-; default-sink =
-; default-source =
-; default-server =
-
-; autospawn = yes
-; daemon-binary = /usr/bin/pulseaudio
-; extra-arguments = --log-target=syslog
-
-; cookie-file =
-
-; enable-shm = yes
-shm-size-bytes = 4194304 # setting this 0 will use the system-default, usually 64 MiB
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values a commented out. Use either ; or # for
-## commenting.
-
-; daemonize = no
-; fail = yes
-; allow-module-loading = yes
-; allow-exit = yes
-; use-pid-file = yes
-; system-instance = no
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-; lock-memory = no
-; cpu-limit = no
-
-; high-priority = yes
-; nice-level = -11
-
-realtime-scheduling = yes
-realtime-priority = 5
-
-; exit-idle-time = 20
-; scache-idle-time = 20
-
-; dl-search-path = (depends on architecture)
-
-; load-default-script-file = yes
-; default-script-file =
-
-log-target = dlog-color
-; log-level = notice
-; log-meta = no
-; log-time = no
-; log-backtrace = 0
-
-resample-method = ffmpeg
-; enable-remixing = yes
-; enable-lfe-remixing = no
-
-; flat-volumes = yes
-
-; rlimit-fsize = -1
-; rlimit-data = -1
-; rlimit-stack = -1
-; rlimit-core = -1
-; rlimit-as = -1
-; rlimit-rss = -1
-; rlimit-nproc = -1
-; rlimit-nofile = 256
-; rlimit-memlock = -1
-; rlimit-locks = -1
-; rlimit-sigpending = -1
-; rlimit-msgqueue = -1
-; rlimit-nice = 31
-; rlimit-rtprio = 9
-; rlimit-rttime = 1000000
-
-; default-sample-format = s16le
-; default-sample-rate = 44100
-; default-sample-channels = 2
-; default-channel-map = front-left,front-right
-
-; default-fragments = 4
-; default-fragment-size-msec = 25
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
-#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Load audio drivers statically (it's probably better to not load
-### these drivers manually, but instead use module-hal-detect --
-### see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-#load-module module-udev-detect
-.else
-### Alternatively use the static hardware detection module (for systems that
-### lack udev support)
-#load-module module-detect
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-#load-module module-zeroconf-publish
-
-### Load the RTP reciever module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user during runtime
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-load-module module-console-kit
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music streams when a phone stream is active
-load-module module-cork-music-on-phone
-
-# X11 modules should not be started from default.pa so that one daemon
-# can be shared by multiple sessions.
-
-### Load X11 bell module
-#load-module module-x11-bell sample=bell-windowing-system
-
-### Register ourselves in the X11 session manager
-#load-module module-x11-xsmp
-
-### Publish connection data in the X11 root window
-#.ifexists module-x11-publish.so
-#.nofail
-#load-module module-x11-publish
-#.fail
-#.endif
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started in system
-# mode.
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-hal-detect.so
-#load-module module-hal-detect
-.else
-### Alternatively use the static hardware detection module (for systems that
-### lack HAL support)
-#load-module module-detect
-load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,3
-load-module module-alsa-source source_name=alsa_input.0.analog-stereo device=hw:0,0
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-load-module module-bluetooth-discover
-
-### Custom policy module to route between bt<=speaker
-load-module module-policy
-
-### Automatically restore the volume of streams and devices
-#load-module module-stream-restore
-#load-module module-device-restore
-
-### Automatically restore the default sink/source when changed by the user during runtime
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### Enable positioned event sounds
-#load-module module-position-event-sounds
-
-### Set default source (not to use alsa_sink monitor which is index 0)
-set-default-source alsa_input.0.analog-stereo
-
-load-module module-remap-sink sink_name=mono_alsa master=alsa_output.0.analog-stereo channels=1
-load-sample camera-shutter /usr/share/sounds/mm-camcorder/capture_shutter_02.wav
+++ /dev/null
-omx_mpeg4dec,
- type=GstOmxMpeg4Dec,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.MPEG4.Decoder,
- sink="video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-divx, divxversion=(int)[4,5], width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-xvid, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-3ivx, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_h264dec,
- type=GstOmxH264Dec,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.AVC.Decoder,
- sink="video/x-h264, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_h263dec,
- type=GstOmxH263Dec,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.H263.Decoder,
- sink="video/x-h263, variant=(string)itu, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_wmvdec,
- type=GstOmxWmvDec,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.WMV.Decoder,
- sink="video/x-wmv, wmvversion=(int)3, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_mpeg4enc,
- type=GstOmxMpeg4Enc,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.MPEG4.Encoder,
- sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_h264enc,
- type=GstOmxH264Enc,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.AVC.Encoder,
- sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-h264, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_h263enc,
- type=GstOmxH263Enc,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.H263.Encoder,
- sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-h263, variant=(string)itu, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = GT-TIZEN
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-VideosrcElement = camerasrc | 2,0 | do-timestamp,1 | num-alloc-buf,7
-UseVideoscale = 0
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 1
-DeviceCount = 1
-
-[AudioInput]
-AudiosrcElement = avsysaudiosrc | 3,0 | do-timestamp,1 | slave-method,3 | latency,0
-AudiomodemsrcElement = voicedatasrcbin | 0,0
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; DisplayMode
-;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
-DisplayMode = 0,1,2 || 0
-; Videosink
-;;; 0: X surface, 1: Evas surface, 2: GL surface, 3: NULL surface
-Videosink = 0,1,3 || 0
-VideosinkElementX = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementEvas = evasimagesink | 4,0 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-buffer,0 | show-preroll-frame,0
-UseVideoscale = 0
-VideoscaleElement = fimcconvert | 1,0 | rotang,90
-
-[VideoEncoder]
-H263 = omx_h263enc | 0,0
-H264 = omx_h264enc | 0,0
-MPEG4 = omx_mpeg4enc | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = ffenc_aac | 0,0
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = secjpeg_enc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 0
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = ffmux_3gp | 0,0
-AMR = ffmux_amr | 0,0
-MP4 = ffmux_mp4 | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = ffmux_adts | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Control INI file >
-;
-; - Header List -
-; 1. Camera
-; 2. Strobe
-; 3. Effect
-; 4. Photograph
-; 5. Capture
-; 6. Detect
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryControl"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[Camera]
-; Input index - real setting value
-;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
-; Input index - MSL value(convert array index)
-;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
-InputIndex = 0,-255 || 0
-DeviceName = S5C73M3
-PreviewResolution = 176,144 | 320,240 | 640,480 | 960,720 | 1280,720 | 1920,1080 || 640,480
-CaptureResolution = 640,480 | 1280,720 | 2048,1152 | 2048,1536 | 3264,1836 | 3264,2176 | 3264,2448 || 3264,2448
-FPS = 0,8,15,24,25,30,60,120 || 30
-; PictureForamt - MSL value
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-PictureFormat = 0,4,5,7,14 || 14
-Overlay = 0,1 || 1
-; Recommend display rotation
-;;; 0:NONE, 1:90, 2:180, 3:270
-RecommendDisplayRotation = 3
-; Recommend preview format for capture
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatCapture = 14
-; Recommend preview format for record
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatRecord = 14
-; Recommend preview resolution
-;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9)
-RecommendPreviewResolution = 960,720 | 1280,720 || 960,720
-; Camera facing direction
-;;; 0:REAR, 1:FRONT
-FacingDirection = 0
-
-
-[Strobe]
-;StrobeControl - Not support
-;StrobeCapabilities - Not support
-; Strobe mode - real setting value
-;;; 0:BASE, 1:OFF, 2:AUTO, 3:ON, 4:TORCH, 5:MAX
-; Strobe mode - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
-StrobeMode = 1,3,2,-255,-255,-255,-255,4 || 2
-;StrobeStatus - Not support
-;StrobeEV - Not support
-
-
-[Effect]
-Brightness = 0,8 || 4
-Contrast = 1,7 || 4
-Saturation = 0,4 || 2
-Sharpness = 0,4 || 2
-
-; White balance - real setting value
-;;; 0:AUTO, 1:DAYLIGHT, 2:CLOUDY, 3:TUNGSTEN, 4:FLUORESCENT
-; White balance - MSL value(convert array index)
-;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
-WhiteBalance = -255,1,2,3,5,4,-255,-255,-255,-255 || 1
-
-; Color tone - real setting value
-;;; 1:NONE, 2:MONO, 3:SEPIA, 4:AQUA, 5:ANTIQUE, 6:NEGATIVE, 7:SHARPEN, 8:SKETCH, 9:WASHED, 10:VINTAGE_WARM
-;;; 11:VINTAGE_COLD, 12:SOLARIZE, 13:POSTERIZE, 14:POINT_BLUE, 15:POINT_RED_YELLOW, 16:POINT_COLOR_3, 17:POINT_GREEN, 18:POINT_RED, 19:POINT_YELLOW, 20:CARTOONIZE
-; Color tone - MSL value(convert array index)
-;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED,
-;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED,
-;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW
-ColorTone = 1,2,3,6,-255,-255,4,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,12,8,9,10,11,13,20,-255,17,14,-255,15 || 1
-; Flip - real setting value
-;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL
-; Flip - MSL value(convert array index)
-;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE
-;Flip = 2,1,0 || 0
-
-; Wide Dynamic Range - real setting value
-;;; 0:OFF, 1:ON
-; Wide Dynamic Range - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO
-WDR = 0,1,-255 || 0
-
-; Part color mode - real setting value
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-; Part color mode - MSL value(convert array index)
-;;; 0:OFF, 1:SWAP, 2:ACCENT
-;PartColorMode = 0,1,2 || 0
-
-; Part color - real setting value
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-; Part color - MSL value(convert array index)
-;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
-;;; 11:GREEN_4, 12:COBALT_BLUE, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
-;PartColor = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 || 0
-
-
-[Photograph]
-;LensInit = 0,1 || 0
-DigitalZoom = 0,30 || 0
-OpticalZoom = 0,0 || 0
-
-; Focus mode - real setting value
-;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS
-; Focus mode - MSL value(convert array index)
-;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
-FocusMode = -255,-255,0,-255,3,4 || 3
-
-; Auto focus type - real setting value
-;;; 0:NORMAL, 1:MACRO, 2:FULL
-; Auto focus - MSL value(convert array index)
-;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
-AFType = -255,0,1,-255 || 0
-
-; Auto exposure type - real setting value
-;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX
-; Auto exposure mode - MSL value(convert array index)
-;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2
-AEType = -255,1,2,-255,-255,3,-255,-255,-255 || 1
-
-;ExposureValue - Not support
-;FNumber - Not support
-;ShutterSpeed - Not support
-
-; ISO - real setting value
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600
-; ISO - MSL value(convert array index)
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
-ISO = 0,-255,2,3,4,5,6,-255 || 0
-
-; Program mode - real setting value
-;;; 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN,
-;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT
-; Program mode - MSL value(convert array index)
-;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
-;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
-ProgramMode = 1,2,5,6,7,8,9,10,11,3,12,13,-255,14,4 || 1
-
-; Anti-handshake - real setting value
-;;; 0:OFF, 1:ON
-; Anti-handshake - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
-AntiHandshake = 0,1,-255,-255 || 0
-
-; Video-stabilization - real setting value
-;;; 0:OFF, 1:ON
-; Video-stabilization - MSL value(convert array index)
-;;; 0:OFF, 1:ON
-VideoStabilization = 0 || 0
-
-; Face zoom mode
-;;; 0:OFF, 1:ON
-FaceZoomMode = 0,1 || 0
-; Face zoom level
-FaceZoomLevel = 0,0 || 0
-
-
-[Capture]
-; Output mode
-;;; No need to convert
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-OutputMode = 0,4,7,13 || 13
-JpegQuality = 0,100 || 50
-MultishotNumber = 1,255 || 1
-SensorEncodedCapture = 1
-; Support HDR
-;;; 0: OFF, 1: ON, 2: ON and Original
-SupportHDR = 0,-255,-255 || 0
-
-
-[Detect]
-; Detect mode
-;;; 0:OFF, 1:ON
-DetectMode = 0,1 || 0
-;DetectNumber - Not support
-;DetectFocusSelect - Not support
-;DetectSelectNumber - Not support
-;DetectStatus - Not support
-
+++ /dev/null
-[general]
-
-; if disabled typefind element will used directely
-use decodebin = no ; async state change problem exist
-
-use sink handler = yes
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element x = xvimagesink
-videosink element evas = evaspixmapsink
-videosink element fake = fakesink
-
-video converter element = ffmpegcolorspace
-
-audiosink element = avsysaudiosink
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword =
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-gstparam1 =
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-generate dot = no
-
-; parameter for clock provide in audiosink
-provide clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 150 ; msec
-
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /opt/usr/media
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
-
-
-[rtsp streaming]
-
-rtspsrc element = rtspsrc
-
-rtsp buffering time = 5000; msec
-
-rtsp rebuffering time = 15000; msec
-
-rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging
-
-rtsp error concealment = yes
-
-
-[hw accelation]
-use video hw accel = no
-
-
-[priority]
-
-use priority setting = no
-
-demux = 95
-
-videosink = 96
-
-audiosink = 97
-
-ringbuffer = 98
-
+++ /dev/null
-[audio effect]
-; name of audio effect element
-audio effect element = audioeq
-
-; preset audio effect setting
-audio effect preset = no
-
-; custom audio effect setting (EQ/extension)
-audio effect custom = yes
-audio effect custom list = 0
-
-audio effect custom eq band num = 7 ; number of EQ bands
-audio effect custom eq band width = 33, 90, 242, 649, 1743, 4676, 12544 ; list of each EQ band width (Hz)
-audio effect custom eq band freq = 36, 98, 265, 711, 1907, 5117, 13727 ; list of each EQ band central frequency (Hz)
-
-audio effect custom min list = -12 ; list of minimum level value (the first element is for EQ, others for extension effect)
-audio effect custom max list = 12 ; list of maximum level value (the first element is for EQ, others for extension effect)
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where an 'Aux' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-name = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where an 'FM' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-name = analog-input-radio
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Mic/Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-name = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Mic' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-name = analog-input-microphone
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Common element for all microphone inputs
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Mic Select'
-
-[Element Mic Select]
-enumeration = select
-
-[Option Mic Select:Mic1]
-name = input-microphone
-priority = 20
-
-[Option Mic Select:Mic2]
-name = input-microphone
-priority = 19
-
-;;; Various Boosts
-
-[Element Mic Boost (+20dB)]
-switch = select
-volume = merge
-
-[Option Mic Boost (+20dB):on]
-name = input-boost-on
-
-[Option Mic Boost (+20dB):off]
-name = input-boost-off
-
-[Element Mic Boost]
-switch = select
-volume = merge
-
-[Option Mic Boost:on]
-name = input-boost-on
-
-[Option Mic Boost:off]
-name = input-boost-off
-
-[Element Front Mic Boost]
-switch = select
-
-[Option Front Mic Boost:on]
-name = input-boost-on
-
-[Option Front Mic Boost:off]
-name = input-boost-off
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'TV Tuner' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-name = analog-input-video
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Video' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; A fallback for devices that lack seperate Mic/Line/Aux/Video/TV
-; Tuner/FM elements
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Capture]
-required = volume
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required-absent = any
-
-[Element Line]
-required-absent = any
-
-[Element Aux]
-required-absent = any
-
-[Element Video]
-required-absent = any
-
-[Element Mic/Line]
-required-absent = any
-
-[Element TV Tuner]
-required-absent = any
-
-[Element FM]
-required-absent = any
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Mixer path for PulseAudio's ALSA backend, common elements for all
-; input paths. If multiple options by the same id are discovered they
-; will be suffixed with a number to distuingish them, in the same
-; order they appear here.
-;
-; Source selection should use the following names:
-;
-; input -- If we don't know the exact kind of input
-; input-microphone
-; input-microphone-internal
-; input-microphone-external
-; input-linein
-; input-video
-; input-radio
-; input-docking-microphone
-; input-docking-linein
-; input-docking
-;
-; We explicitly don't want to wrap the following sources:
-;
-; CD
-; Synth/MIDI
-; Phone
-; Mix
-; Digital/SPDIF
-; Master
-; PC Speaker
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Input Source Select'
-
-[Element Input Source Select]
-enumeration = select
-
-[Option Input Source Select:Input1]
-name = input
-priority = 10
-
-[Option Input Source Select:Input2]
-name = input
-priority = 5
-
-;;; 'Input Source'
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Mic]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Microphone]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Front Mic]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Front Microphone]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Internal Mic]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Line]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line-In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Docking-Station]
-name = input-docking
-priority = 17
-
-[Option Input Source:AUX IN]
-name = input
-priority = 10
-
-;;; 'Capture Source'
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:TV Tuner]
-name = input-video
-
-[Option Capture Source:FM]
-name = input-radio
-
-[Option Capture Source:Mic/Line]
-name = input
-
-[Option Capture Source:Line/Mic]
-name = input
-
-[Option Capture Source:Mic]
-name = input-microphone
-
-[Option Capture Source:Microphone]
-name = input-microphone
-
-[Option Capture Source:Int Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Int DMic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Mic]
-name = input-microphone-internal
-
-[Option Capture Source:iMic]
-name = input-microphone-internal
-
-[Option Capture Source:i-Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Microphone]
-name = input-microphone-internal
-
-[Option Capture Source:Front Mic]
-name = input-microphone
-
-[Option Capture Source:Front Microphone]
-name = input-microphone
-
-[Option Capture Source:Rear Mic]
-name = input-microphone
-
-[Option Capture Source:Mic1]
-name = input-microphone
-
-[Option Capture Source:Mic2]
-name = input-microphone
-
-[Option Capture Source:D-Mic]
-name = input-microphone
-
-[Option Capture Source:IntMic]
-name = input-microphone-internal
-
-[Option Capture Source:ExtMic]
-name = input-microphone-external
-
-[Option Capture Source:Ext Mic]
-name = input-microphone-external
-
-[Option Capture Source:E-Mic]
-name = input-microphone-external
-
-[Option Capture Source:e-Mic]
-name = input-microphone-external
-
-[Option Capture Source:LineIn]
-name = input-linein
-
-[Option Capture Source:Analog]
-name = input
-
-[Option Capture Source:Line]
-name = input-linein
-
-[Option Capture Source:Line-In]
-name = input-linein
-
-[Option Capture Source:Line In]
-name = input-linein
-
-[Option Capture Source:Video]
-name = input-video
-
-[Option Capture Source:Aux]
-name = input
-
-[Option Capture Source:Aux0]
-name = input
-
-[Option Capture Source:Aux1]
-name = input
-
-[Option Capture Source:Aux2]
-name = input
-
-[Option Capture Source:Aux3]
-name = input
-
-[Option Capture Source:AUX IN]
-name = input
-
-[Option Capture Source:Aux In]
-name = input
-
-[Option Capture Source:AOUT]
-name = input
-
-[Option Capture Source:AUX]
-name = input
-
-[Option Capture Source:Cam Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 1]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 2]
-name = input-microphone
-
-[Option Capture Source:Analog Inputs]
-name = input
-
-[Option Capture Source:Unknown1]
-name = input
-
-[Option Capture Source:Unknown2]
-name = input
-
-[Option Capture Source:Docking-Station]
-name = input-docking
-
-[Option Capture Source:Dock Mic]
-name = input-docking-microphone
-
-;;; 'Mic Jack Mode'
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Mic In]
-name = input-microphone
-
-[Option Mic Jack Mode:Line In]
-name = input-linein
-
-;;; 'Digital Input Source'
-
-[Element Digital Input Source]
-enumeration = select
-
-[Option Digital Input Source:Analog Inputs]
-name = input
-
-[Option Digital Input Source:Digital Mic 1]
-name = input-microphone
-
-[Option Digital Input Source:Digital Mic 2]
-name = input-microphone
-
-;;; Various Boosts
-
-[Element Capture Boost]
-switch = select
-
-[Option Capture Boost:on]
-name = input-boost-on
-
-[Option Capture Boost:off]
-name = input-boost-off
-
-[Element Auto Gain Control]
-switch = select
-
-[Option Auto Gain Control:on]
-name = input-agc-on
-
-[Option Auto Gain Control:off]
-name = input-agc-off
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Headphone2' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 89
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the second headphones, not
-; the first headphones. But it should not hurt if we leave the
-; headphone jack enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Headphone' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Headphone]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the first headphones, not
-; the second headphones. But it should not hurt if we leave the second
-; headphone jack enabled nonetheless.
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for usage in laptops that have a seperate LFE speaker
-; connected to the Master mono connector
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 40
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all-no-lfe
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for usage on boards that have a seperate Mono output plug.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 50
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = off
-volume = off
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Speaker' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for the 'default' output. Note that a-o-speaker.conf has a
-; higher priority than this
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 99
-
-[Element Hardware Master]
-switch = ignore
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = ignore
-volume = ignore
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the default output, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = ignore
-volume = zero
-
-[Element Headphone2]
-switch = ignore
-volume = zero
-
-[Element Speaker]
-switch = ignore
-volume = off
-
-[Element Front]
-switch = ignore
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = ignore
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = ignore
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = ignore
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = ignore
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = ignore
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Common part of all paths
-
-; So here's generally how mixer paths are used by PA: PA goes through
-; a mixer path file from top to bottom and checks if a mixer element
-; described therein exists. If so it is added to the list of mixer
-; elements PA will control, keeping the order it read them in. If a
-; mixer element described here has set the required= or
-; required-absent= directives a path might not be accepted as valid
-; and is ignored in its entirety (see below). However usually if a
-; element listed here is missing this one element is ignored but not
-; the entire path.
-;
-; When a device shall be muted/unmuted *all* elements listed in a path
-; file with "switch = mute" will be toggled.
-;
-; When a device shall change its volume, PA will got through the list
-; of all elements with "volume = merge" and set the volume on the
-; first element. If that element does not support dB volumes, this is
-; where the story ends. If it does support dB volumes, PA divides the
-; requested volume by the volume that was set on this element, and
-; then go on to the next element with "volume = merge" and then set
-; that there, and so on. That way the first volume element in the
-; path will be the one that does the 'biggest' part of the overall
-; volume adjustment, with the remaining elements usually being set to
-; some value next to 0dB. This logic makes sure we get the full range
-; over all volume sliders and a very high granularity of volumes
-; already in hardware.
-;
-; All switches and enumerations set to "select" are exposed via the
-; "port" functionality of sinks/sources. Basically every possible
-; switch setting and every possible enumeration setting will be
-; combined and made into a "port". So make sure you don't list too
-; many switches/enums for exposing, because the number of ports might
-; rise exponentially.
-;
-; Only one path can be selected at a time. All paths that are valid
-; for an audio device will be exposed as "port" for the sink/source.
-
-
-; [General]
-; priority = ... # Priority for this path
-; description = ...
-;
-; [Option ...:...] # For each option of an enumeration or switch element
-; # that shall be exposed as a sink/source port. Needs to
-; # be named after the Element, followed by a colon, followed
-; # by the option name, resp. on/off if the element is a switch.
-; name = ... # Logical name to use in the path identifier
-; priority = ... # Priority if this is made into a device port
-;
-; [Element ...] # For each element that we shall control
-; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available,
-; # otherwise don't consider this path valid for the card
-; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not
-; # available, otherwise don't consider this path valid for the card
-;
-; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
-; # always set it to off, always to on, or make it selectable as port.
-; # If set to 'select' you need to define an Option section for on
-; # and off
-; volume = ignore | merge | off | zero # What to do with this volume: ignore it, merge it into the device
-; # volume slider, always set it to the lowest value possible, or always
-; # set it to 0 dB (for whatever that means)
-; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable
-; # via device ports. If set to 'select' you need to define an Option section
-; # for each of the items you want to expose
-; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be
-; # set the direction of the PCM device is opened as. Generally this doesn't need to be set
-; # unless you have a broken driver that has playback controls marked for capture or vice
-; # versa
-; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too?
-;
-; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel
-; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels
-; # Override maps should list for each element channel which high-level channels it controls via a
-; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
-; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
-; # channels in a mask
-
-[Element PCM]
-switch = ignore
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element External Amplifier]
-switch = select
-
-[Option External Amplifier:on]
-name = output-amplifier-on
-priority = 10
-
-[Option External Amplifier:off]
-name = output-amplifier-off
-priority = 0
-
-;;; 'Analog Output'
-
-[Element Analog Output]
-enumeration = select
-
-[Option Analog Output:Speakers]
-name = output-speaker
-priority = 10
-
-[Option Analog Output:Headphones]
-name = output-headphones
-priority = 9
-
-[Option Analog Output:FP Headphones]
-name = output-headphones
-priority = 8
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Default profile definitions for the ALSA backend of PulseAudio. This
-; is used as fallback for all cards that have no special mapping
-; assigned. (and should be good enough for the vast majority of
-; cards). Use the udev property PULSE_PROFILE_SET to assign a
-; different profile set than this one to a device. So what is this
-; about? Simply, what we do here is map ALSA devices to how they are
-; exposed in PA. We say which ALSA device string to use to open a
-; device, which channel mapping to use then, and which mixer path to
-; use. This is encoded in a 'mapping'. Multiple of these mappings can
-; be bound together in a 'profile' which is then directly exposed in
-; the UI as a card profile. Each mapping assigned to a profile will
-; result in one sink/source to be created if the profile is selected
-; for the card.
-
-; [General]
-; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate
-; # them by combining every input mapping with every output mapping.
-;
-; [Mapping id]
-; device-strings = ... # ALSA device string. %f will be replaced by the card identifier.
-; channel-map = ... # Channel mapping to use for this device
-; description = ...
-; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed.
-; # If multiple are found to be working they will be available as device ports
-; paths-output = ...
-; element-input = ... # Instead of configuring a full mixer path simply configure a single
-; # mixer element for volume/mute handling
-; element-output = ...
-; priority = ...
-; direction = any | input | output # Only useful for?
-;
-; [Profile id]
-; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be
-; # defined in this file too
-; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be
-; # defined in this file too
-; description = ...
-; priority = ... # Numeric value to deduce priority for this profile
-; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile
-; # will be assumed as working without probing. Makes initialization
-; # a bit faster but only works if the card is really known well.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:0
-channel-map = mono
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping analog-stereo]
-device-strings = front:%f hw:0
-channel-map = left,right
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 8
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-priority = 5
-
-[Mapping iec958-surround-40]
-device-strings = iec958:%f
-channel-map = front-left,front-right,rear-left,rear-right
-priority = 1
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-device-strings = hdmi:%f
-channel-map = left,right
-priority = 4
-direction = output
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Native Instruments Audio 4 DJ
-;
-; This card has two stereo pairs of input and two stereo pairs of
-; output, named channels A and B. Channel B has an additional
-; Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b-output]
-description = Analog Stereo Channel B (Headphones)
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-b-input]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b-output
-input-mappings = analog-stereo-a analog-stereo-b-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-input-mappings = analog-stereo-b-input
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-priority = 6
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b-input
-priority = 1
-skip-probe = yes
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Native Instruments Audio 8 DJ
-;
-; This card has four stereo pairs of input and four stereo pairs of
-; output, named channels A to D. Channel C has an additional Mic/Line
-; connector, channel D an additional Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-
-# Since we want to set a different description for channel C's/D's input
-# and output we define two seperate mappings for them
-[Mapping analog-stereo-c-output]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-c-input]
-description = Analog Stereo Channel C (Line/Mic)
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-d-output]
-description = Analog Stereo Channel D (Headphones)
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-d-input]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-c]
-description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-c-input
-priority = 90
-skip-probe = yes
-
-[Profile output:analog-stereo-c-d+input:analog-stereo-c-d]
-description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic)
-output-mappings = analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-c-input analog-stereo-d-input
-priority = 80
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-b
-input-mappings = analog-stereo-b
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-c+input:analog-stereo-c]
-description = Analog Stereo Duplex Channel C (Line/Mic)
-output-mappings = analog-stereo-c-output
-input-mappings = analog-stereo-c-input
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-d]
-description = Analog Stereo Duplex Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-d-input
-priority = 70
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 6
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-c]
-description = Analog Stereo Output Channel C
-output-mappings = analog-stereo-c-output
-priority = 7
-skip-probe = yes
-
-[Profile output:analog-stereo-d]
-description = Analog Stereo Output Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-priority = 8
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b
-priority = 1
-skip-probe = yes
-
-[Profile input:analog-stereo-c]
-description = Analog Stereo Input Channel C (Line/Mic)
-input-mappings = analog-stereo-c-input
-priority = 4
-skip-probe = yes
-
-[Profile input:analog-stereo-d]
-description = Analog Stereo Input Channel D
-input-mappings = analog-stereo-d-input
-priority = 3
-skip-probe = yes
+++ /dev/null
-<manifest>
- <request>
- <domain name="_" />
- </request>
-</manifest>
+++ /dev/null
-# default sound configuration for c210
-
-pcm. !default {
- type hw
- card 0
-}
-
-ctl. !default {
- type hw
- card 0
-}
-
-pcm. AIF2{
- type hw
- card 0
- device 1
-}
-
-pcm. AIF3{
- type hw
- card 0
- device 3
-}
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
-## more information. Default values a commented out. Use either ; or # for
-## commenting.
-
-; default-sink =
-; default-source =
-; default-server =
-
-; autospawn = yes
-; daemon-binary = /usr/bin/pulseaudio
-; extra-arguments = --log-target=syslog
-
-; cookie-file =
-
-; enable-shm = yes
-shm-size-bytes = 4194304 # setting this 0 will use the system-default, usually 64 MiB
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA.
-
-## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
-## more information. Default values a commented out. Use either ; or # for
-## commenting.
-
-; daemonize = no
-; fail = yes
-; allow-module-loading = yes
-; allow-exit = yes
-; use-pid-file = yes
-; system-instance = no
-; enable-shm = yes
-; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
-; lock-memory = no
-; cpu-limit = no
-
-; high-priority = yes
-; nice-level = -11
-
-realtime-scheduling = yes
-realtime-priority = 5
-
-; exit-idle-time = 20
-; scache-idle-time = 20
-
-; dl-search-path = (depends on architecture)
-
-; load-default-script-file = yes
-; default-script-file =
-
-log-target = dlog-color
-; log-level = notice
-; log-meta = no
-; log-time = no
-; log-backtrace = 0
-
-resample-method = ffmpeg
-; enable-remixing = yes
-; enable-lfe-remixing = no
-
-; flat-volumes = yes
-
-; rlimit-fsize = -1
-; rlimit-data = -1
-; rlimit-stack = -1
-; rlimit-core = -1
-; rlimit-as = -1
-; rlimit-rss = -1
-; rlimit-nproc = -1
-; rlimit-nofile = 256
-; rlimit-memlock = -1
-; rlimit-locks = -1
-; rlimit-sigpending = -1
-; rlimit-msgqueue = -1
-; rlimit-nice = 31
-; rlimit-rtprio = 9
-; rlimit-rttime = 1000000
-
-; default-sample-format = s16le
-; default-sample-rate = 44100
-; default-sample-channels = 2
-; default-channel-map = front-left,front-right
-
-; default-fragments = 4
-; default-fragment-size-msec = 25
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
-#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
-#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Load audio drivers statically (it's probably better to not load
-### these drivers manually, but instead use module-hal-detect --
-### see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:1,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-#load-module module-udev-detect
-.else
-### Alternatively use the static hardware detection module (for systems that
-### lack udev support)
-#load-module module-detect
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-#load-module module-zeroconf-publish
-
-### Load the RTP reciever module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user during runtime
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-load-module module-console-kit
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music streams when a phone stream is active
-load-module module-cork-music-on-phone
-
-# X11 modules should not be started from default.pa so that one daemon
-# can be shared by multiple sessions.
-
-### Load X11 bell module
-#load-module module-x11-bell sample=bell-windowing-system
-
-### Register ourselves in the X11 session manager
-#load-module module-x11-xsmp
-
-### Publish connection data in the X11 root window
-#.ifexists module-x11-publish.so
-#.nofail
-#load-module module-x11-publish
-#.fail
-#.endif
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input
+++ /dev/null
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started in system
-# mode.
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-hal-detect.so
-#load-module module-hal-detect
-.else
-### Alternatively use the static hardware detection module (for systems that
-### lack HAL support)
-load-module module-detect
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-load-module module-bluetooth-discover
-
-### Custom policy module to route between bt<=speaker
-load-module module-policy
-
-### Automatically restore the volume of streams and devices
-#load-module module-stream-restore
-#load-module module-device-restore
-
-### Automatically restore the default sink/source when changed by the user during runtime
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### Enable positioned event sounds
-#load-module module-position-event-sounds
-
-### Set default source (not to use alsa_sink monitor which is index 0)
-set-default-source alsa_input.0.analog-stereo
-
-load-module module-remap-sink sink_name=mono_alsa master=alsa_output.0.analog-stereo channels=1
-load-sample camera-shutter /usr/share/sounds/mm-camcorder/capture_shutter_02.wav
+++ /dev/null
-omx_mpeg4dec,
- type=GstOmxMpeg4Dec,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.MPEG4.Decoder,
- sink="video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-divx, divxversion=(int)[4,5], width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-xvid, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max]; video/x-3ivx, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_h264dec,
- type=GstOmxH264Dec,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.AVC.Decoder,
- sink="video/x-h264, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_h263dec,
- type=GstOmxH263Dec,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.H263.Decoder,
- sink="video/x-h263, variant=(string)itu, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_wmvdec,
- type=GstOmxWmvDec,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.WMV.Decoder,
- sink="video/x-wmv, wmvversion=(int)3, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-raw-yuv, format=(fourcc){ST12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_mpeg4enc,
- type=GstOmxMpeg4Enc,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.MPEG4.Encoder,
- sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_h264enc,
- type=GstOmxH264Enc,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.AVC.Encoder,
- sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-h264, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
-
-omx_h263enc,
- type=GstOmxH263Enc,
- library-name=libSEC_OMX_Core.so.0,
- component-name=OMX.SEC.H263.Encoder,
- sink="video/x-raw-yuv, format=(fourcc){ST12, SN12}, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- src="video/x-h263, variant=(string)itu, width=(int)[16,4096], height=(int)[16,4096], framerate=(fraction)[0,max];",
- rank=256;
+++ /dev/null
-; < Camera/Camcorder Configure Main INI file >
-;
-; - aquila_FUJITSU_M5MOLS
-;
-; - Header List -
-; 1. General
-; 2. VideoInput
-; 3. AudioInput
-; 4. VideoOutput
-; 5. Capture
-; 6. Record
-; 7. VideoEncoder
-; 8. AudioEncoder
-; 9. ImageEncoder
-; 10. Mux
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryMain"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[General]
-SyncStateChange = 1
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
-;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
-ModelName = GT-TIZEN
-;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
-
-[VideoInput]
-UseConfCtrl = 1
-ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
-ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
-VideosrcElement = camerasrc | 2,0 | do-timestamp,1 | num-alloc-buf,7
-UseVideoscale = 0
-VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
-UseZeroCopyFormat = 1
-DeviceCount = 2
-
-[AudioInput]
-AudiosrcElement = avsysaudiosrc | 3,0 | do-timestamp,1 | slave-method,3 | latency,0
-AudiomodemsrcElement = audiotestsrc | 2,0 | do-timestamp,1 | slave-method,3
-
-[VideoOutput]
-; DisplayDevice
-;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
-DisplayDevice = 0 || 0
-; Videosink
-;;; 0: X surface, 1: Evas surface, 2: GL surface, 3: NULL surface
-Videosink = 0,1,3 || 0
-VideosinkElementX = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementEvas = evasimagesink | 4,0 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0
-VideosinkElementNull = fakesink | 3,0 | qos,0 | sync,0 | enable-last-buffer,0
-UseVideoscale = 0
-VideoscaleElement = fimcconvert | 1,0 | rotang,90
-
-[VideoEncoder]
-H263 = omx_h263enc | 0,0
-H264 = omx_h264enc | 0,0
-MPEG4 = omx_mpeg4enc | 0,0
-
-[AudioEncoder]
-AMR = amrnbenc | 0,0
-AAC = ffenc_aac | 0,0
-WAVE = wavenc | 0,0
-
-[ImageEncoder]
-JPEG = secjpeg_enc | 0,0
-;PNG = pngenc | 0,0
-
-[Capture]
-UseEncodebin = 0
-UseCaptureMode = 0
-VideoscaleElement = videoscale | 1,0 | method,1
-
-[Record]
-UseAudioEncoderQueue = 1
-UseVideoEncoderQueue = 1
-VideoProfile = 0
-VideoAutoAudioConvert = 1
-VideoAutoAudioResample = 0
-VideoAutoColorSpace = 0
-AudioProfile = 1
-AudioAutoAudioConvert = 1
-AudioAutoAudioResample = 0
-AudioAutoColorSpace = 0
-ImageProfile = 2
-ImageAutoAudioConvert = 0
-ImageAutoAudioResample = 0
-ImageAutoColorSpace = 1
-RecordsinkElement = filesink | 1,0 | async,0
-UseNoiseSuppressor = 0
-DropVideoFrame = 0
-PassFirstVideoFrame = 0
-
-[Mux]
-3GP = ffmux_3gp | 0,0
-AMR = ffmux_amr | 0,0
-MP4 = ffmux_mp4 | 0,0
-AVI = avimux | 0,0
-MATROSKA = matroskamux | 0,0
-WAV = wavenc | 0,0
-AAC = ffmux_adts | 0,0
-
+++ /dev/null
-; < Camera/Camcorder Configure Control INI file >
-;
-; - aquila_FUJITSU_M5MOLS
-;
-; - Header List -
-; 1. Camera
-; 2. Strobe
-; 3. Effect
-; 4. Photograph
-; 5. Capture
-; 6. Detect
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryControl"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[Camera]
-; Input index - real setting value
-;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
-; Input index - MSL value(convert array index)
-;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
-InputIndex = 0,-255 || 0
-DeviceName = m5mols_c210
-PreviewResolution = 176,144 | 320,240 | 640,480 | 720,480 | 800,480 | 1280,720 | 1920,1080 || 640,480
-CaptureResolution = 640,480 | 1280,720 | 1920,1080 | 2048,1536 | 3264,1960 | 3264,2448 || 3264,2448
-FPS = 0,8,15,24,25,30,60,120 || 30
-; PictureForamt - MSL value
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-PictureFormat = 0,4,7 || 0
-Overlay = 0,1 || 1
-; Recommend display rotation
-;;; 0:NONE, 1:90, 2:180, 3:270
-RecommendDisplayRotation = 3
-; Recommend preview format for capture
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatCapture = 0
-; Recommend preview format for record
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatRecord = 0
-; Recommend preview resolution
-;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9)
-RecommendPreviewResolution = 640,480 | 800,480 || 640,480
-; Camera facing direction
-;;; 0:REAR, 1:FRONT
-FacingDirection = 0
-
-
-[Strobe]
-;StrobeControl - Not support
-;StrobeCapabilities - Not support
-; Strobe mode - real setting value
-;;; 0:BASE, 1:OFF, 2:AUTO, 3:ON, 4:TORCH, 5:MAX
-; Strobe mode - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
-StrobeMode = 1,-255,-255,-255,-255,-255,-255,-255 || 1
-;StrobeStatus - Not support
-;StrobeEV - Not support
-
-
-[Effect]
-Brightness = 0,8 || 4
-;Contrast = 1,7 || 4
-Saturation = 0,4 || 2
-Sharpness = 0,4 || 2
-
-; White balance - real setting value
-;;; 0:BASE, 1:AUTO, 2:SUNNY, 3:CLOUDY, 4:TUNGSTEN, 5:FLUORESCENT
-; White balance - MSL value(convert array index)
-;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
-WhiteBalance = -255,1,2,3,5,4,-255,-255,-255,-255 || 1
-
-; Color tone - real setting value
-;;; 1:NONE, 2:BNW, 3:SEPIA, 4:AQUA, 6:NEGATIVE
-; Color tone - MSL value(convert array index)
-;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED,
-;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED,
-;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW
-ColorTone = 1,-255,3,6,-255,-255,4,-255,-255,2,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Flip - real setting value
-;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL
-; Flip - MSL value(convert array index)
-;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE
-;Flip = 2,1,0 || 0
-
-; Wide Dynamic Range - real setting value
-;;; 0:OFF, 1:ON
-; Wide Dynamic Range - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO
-WDR = 0,1,-255 || 0
-
-
-[Photograph]
-;LensInit = 0,1 || 0
-DigitalZoom = 0,30 || 0
-OpticalZoom = 0,0 || 0
-
-; Focus mode - real setting value
-;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS
-; Focus mode - MSL value(convert array index)
-;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
-FocusMode = -255,-255,0,-255,3,-255 || 3
-
-; Auto focus type - real setting value
-;;; 0:NORMAL, 1:MACRO, 2:FULL
-; Auto focus - MSL value(convert array index)
-;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
-AFType = -255,0,1,-255 || 0
-
-; Auto exposure type - real setting value
-;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX
-; Auto exposure mode - MSL value(convert array index)
-;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2
-AEType = -255,1,2,-255,-255,3,-255,-255,-255 || 1
-
-;ExposureValue - Not support
-;FNumber - Not support
-;ShutterSpeed - Not support
-
-; ISO - real setting value
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600(Not Supported), 7:SPORTS(Not Supported), 8:NIGHT(Not Supported), 9:MOVIE(Not Supported)
-; ISO - MSL value(convert array index)
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
-ISO = 0,1,2,3,4,5,-255,-255 || 0
-
-; Program mode - real setting value
-;;; 0:BASE, 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN,
-;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT
-; Program mode - MSL value(convert array index)
-;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
-;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
-ProgramMode = 1,2,5,6,7,-255,9,10,11,3,12,13,-255,14,4 || 1
-
-; Anti-handshake - real setting value
-;;; N/A
-; Anti-handshake - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
-AntiHandshake = 0,-255,-255,-255 || 0
-
-; Video-stabilization - real setting value
-;;; 0:OFF, 1:ON
-; Video-stabilization - MSL value(convert array index)
-;;; 0:OFF, 1:ON
-VideoStabilization = 0 || 0
-
-; Face zoom mode
-;;; 0:OFF, 1:ON
-FaceZoomMode = 0 || 0
-; Face zoom level
-FaceZoomLevel = 0,0 || 0
-
-
-[Capture]
-; Output mode
-;;; No need to convert
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-OutputMode = 0,4,7,13 || 13
-JpegQuality = 0,100 || 50
-MultishotNumber = 1,255 || 1
-SensorEncodedCapture = 1
-; Support HDR
-;;; 0: OFF, 1: ON, 2: ON and Original
-SupportHDR = 0,-255,-255 || 0
-
-
-[Detect]
-; Detect mode
-;;; No need to convert
-;;; 0:OFF, 1:ON
-DetectMode = 0 || 0
-;DetectNumber - Not support
-;DetectFocusSelect - Not support
-;DetectSelectNumber - Not support
-;DetectStatus - Not support
-
+++ /dev/null
-; < Camera/Camcorder Configure Control INI file >
-;
-; - aquila_FUJITSU_M5MOLS - VGA camera
-;
-; - Header List -
-; 1. Camera
-; 2. Strobe
-; 3. Effect
-; 4. Photograph
-; 5. Capture
-; 6. Detect
-;
-; - Note -
-; If you want to add a new header,
-; add a new enum value to "enum ConfigureCategoryControl"
-; and new default table for it in mm_camcorder_configure.c/.h
-;
-
-[Camera]
-; Input index - real setting value
-;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
-; Input index - MSL value(convert array index)
-;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
-InputIndex = -255,1 || 1
-DeviceName = m4mo_VGA_c210
-PreviewResolution = 176,144 | 320,240 | 352,288 | 640,480 || 640,480
-CaptureResolution = 176,144 | 320,240 | 352,288 | 640,480 || 640,480
-FPS = 0,8,15,25,30 || 30
-; PictureForamt - MSL value
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-PictureFormat = 0,4,7 || 0
-Overlay = 0,1 || 1
-; Recommend display rotation
-;;; 0:NONE, 1:90, 2:180, 3:270
-RecommendDisplayRotation = 3
-; Recommend preview format for capture
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatCapture = 0
-; Recommend preview format for record
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
-RecommendPreviewFormatRecord = 0
-; Recommend preview resolution
-;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9)
-RecommendPreviewResolution = 640,480 | 352,288 || 640,480
-; Camera facing direction
-;;; 0:REAR, 1:FRONT
-FacingDirection = 1
-
-
-[Strobe]
-;StrobeControl - Not support
-;StrobeCapabilities - Not support
-; Strobe mode - real setting value
-;;; N/A
-; Strobe mode - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
-StrobeMode = 0,-255,-255,-255,-255,-255,-255,-255 || 0
-;StrobeStatus - Not support
-;StrobeEV - Not support
-
-
-[Effect]
-Brightness = -4,4 || 0
-;Contrast - Not support
-;Saturation - Not support
-;Sharpness - Not support
-
-; White balance - real setting value
-;;; N/A
-; White balance - MSL value(convert array index)
-;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
-WhiteBalance = -255,0,-255,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Color tone - real setting value
-;;; N/A
-; Color tone - MSL value(convert array index)
-;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED,
-;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED,
-;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW
-ColorTone = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Wide Dynamic Range - real setting value
-;;; N/A
-; Wide Dynamic Range - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO
-WDR = 0,-255,-255 || 0
-
-
-[Photograph]
-;LensInit - Not support
-DigitalZoom = 0,0 || 0
-OpticalZoom = 0,0 || 0
-
-; Focus mode - real setting value
-;;; N/A
-; Focus mode - MSL value(convert array index)
-;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
-FocusMode = -255,0,-255,-255,-255,-255 || 0
-
-; Auto focus type - real setting value
-;;; N/A
-; Auto focus - MSL value(convert array index)
-;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
-AFType = 0,-255,-255,-255 || 0
-
-; Auto exposure type - real setting value
-;;; N/A
-; Auto exposure mode - MSL value(convert array index)
-;;; 0:OFF, 1:ALL, 2:CENTER1, 3:CENTER2, 4:CENTER3, 5:SPOT1, 6:SPOT2, 7:CUSTOM1, 8:CUSTOM2
-AEType = -255,0,-255,-255,-255,-255,-255,-255,-255 || 0
-
-;ExposureValue - Not support
-;FNumber - Not support
-;ShutterSpeed - Not support
-
-; ISO - real setting value
-;;; N/A
-; ISO - MSL value(convert array index)
-;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
-ISO = 0,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Program mode - real setting value
-;;; N/A
-; Program mode - MSL value(convert array index)
-;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
-;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
-ProgramMode = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0
-
-; Anti-handshake - real setting value
-;;; N/A
-; Anti-handshake - MSL value(convert array index)
-;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
-AntiHandshake = 0,-255,-255,-255 || 0
-
-; Video-stabilization - real setting value
-;;; 0:OFF, 1:ON
-; Video-stabilization - MSL value(convert array index)
-;;; 0:OFF, 1:ON
-VideoStabilization = 0 || 0
-
-; Face zoom mode
-;;; 0:OFF, 1:ON
-FaceZoomMode = 0 || 0
-; Face zoom level
-FaceZoomLevel = 0,0 || 0
-
-
-[Capture]
-; Output mode
-;;; No need to convert
-;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED
-OutputMode = 0,4,7,13 || 13
-JpegQuality = 0,100 || 50
-MultishotNumber = 1,255 || 1
-SensorEncodedCapture = 0
-; Support HDR
-;;; 0: OFF, 1: ON, 2: ON and Original
-SupportHDR = 0,-255,-255 || 0
-
-
-[Detect]
-; Detect mode
-;;; No need to convert
-;;; 0:OFF, 1:ON
-DetectMode = 0 || 0
-;DetectNumber - Not support
-;DetectFocusSelect - Not support
-;DetectSelectNumber - Not support
-;DetectStatus - Not support
-
+++ /dev/null
-[general]
-
-; if disabled typefind element will used directely
-use decodebin = no ; async state change problem exist
-
-use sink handler = yes
-
-disable segtrap = yes ; same effect with --gst-disable-segtrap
-
-; set default videosink element according to video surface type(X, EVAS, NULL)
-videosink element x = xvimagesink
-videosink element evas = evaspixmapsink
-videosink element fake = fakesink
-
-video converter element = ffmpegcolorspace
-
-audiosink element = avsysaudiosink
-
-drmsrc element = filesrc
-
-; if yes. gstreamer will not update registry
-skip rescan = yes
-delay before repeat = 50 ; msec
-
-; comma separated list of tocken which elemnts has it in it's name will not be used
-element exclude keyword =
-
-async start = yes
-
-multiple codec supported = yes
-
-; parameters for initializing gstreamer
-gstparam1 =
-gstparam2 =
-gstparam3 =
-gstparam4 =
-gstparam5 =
-
-; generating dot file representing pipeline state
-generate dot = no
-
-; parameter for clock provide in audiosink
-provide clock = yes
-
-; allowed timeout for changing pipeline state
-live state change timeout = 30 ; sec
-localplayback state change timeout = 10 ; sec
-
-; delay in msec for sending EOS
-eos delay = 150 ; msec
-
-
-[http streaming]
-
-httpsrc element = souphttpsrc
-
-; if set, use file or not use memory for buffering
-http file buffer path = /opt/usr/media
-
-http buffering limit = 99.0 ; percent
-
-http max size bytes = 1048576 ; bytes
-
-http buffering time = 1.2
-
-http timeout = 30 ; sec
-
-
-[rtsp streaming]
-
-rtspsrc element = rtspsrc
-
-rtsp buffering time = 5000; msec
-
-rtsp rebuffering time = 15000; msec
-
-rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging
-
-rtsp error concealment = yes
-
-
-[hw accelation]
-use video hw accel = no
-
-
-[priority]
-
-use priority setting = no
-
-demux = 95
-
-videosink = 96
-
-audiosink = 97
-
-ringbuffer = 98
-
+++ /dev/null
-[audio effect]
-; name of audio effect element
-audio effect element = audioeq
-
-; preset audio effect setting
-audio effect preset = no
-
-; custom audio effect setting (EQ/extension)
-audio effect custom = yes
-audio effect custom list = 0
-
-audio effect custom eq band num = 7 ; number of EQ bands
-audio effect custom eq band width = 33, 90, 242, 649, 1743, 4676, 12544 ; list of each EQ band width (Hz)
-audio effect custom eq band freq = 36, 98, 265, 711, 1907, 5117, 13727 ; list of each EQ band central frequency (Hz)
-
-audio effect custom min list = -12 ; list of minimum level value (the first element is for EQ, others for extension effect)
-audio effect custom max list = 12 ; list of maximum level value (the first element is for EQ, others for extension effect)
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where an 'Aux' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-name = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where an 'FM' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-name = analog-input-radio
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Mic/Line' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-name = analog-input
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Mic' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-name = analog-input-microphone
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Common element for all microphone inputs
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Mic Select'
-
-[Element Mic Select]
-enumeration = select
-
-[Option Mic Select:Mic1]
-name = input-microphone
-priority = 20
-
-[Option Mic Select:Mic2]
-name = input-microphone
-priority = 19
-
-;;; Various Boosts
-
-[Element Mic Boost (+20dB)]
-switch = select
-volume = merge
-
-[Option Mic Boost (+20dB):on]
-name = input-boost-on
-
-[Option Mic Boost (+20dB):off]
-name = input-boost-off
-
-[Element Mic Boost]
-switch = select
-volume = merge
-
-[Option Mic Boost:on]
-name = input-boost-on
-
-[Option Mic Boost:off]
-name = input-boost-off
-
-[Element Front Mic Boost]
-switch = select
-
-[Option Front Mic Boost:on]
-name = input-boost-on
-
-[Option Front Mic Boost:off]
-name = input-boost-off
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'TV Tuner' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-name = analog-input-video
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-switch = off
-volume = off
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; For devices where a 'Video' element exists
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 70
-
-[Element Capture]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-switch = off
-volume = off
-
-[Element Line]
-switch = off
-volume = off
-
-[Element Aux]
-switch = off
-volume = off
-
-[Element Video]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic/Line]
-switch = off
-volume = off
-
-[Element TV Tuner]
-switch = off
-volume = off
-
-[Element FM]
-switch = off
-volume = off
-
-.include analog-input.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; A fallback for devices that lack seperate Mic/Line/Aux/Video/TV
-; Tuner/FM elements
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Capture]
-required = volume
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Mic]
-required-absent = any
-
-[Element Line]
-required-absent = any
-
-[Element Aux]
-required-absent = any
-
-[Element Video]
-required-absent = any
-
-[Element Mic/Line]
-required-absent = any
-
-[Element TV Tuner]
-required-absent = any
-
-[Element FM]
-required-absent = any
-
-.include analog-input.conf.common
-.include analog-input-mic.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Mixer path for PulseAudio's ALSA backend, common elements for all
-; input paths. If multiple options by the same id are discovered they
-; will be suffixed with a number to distuingish them, in the same
-; order they appear here.
-;
-; Source selection should use the following names:
-;
-; input -- If we don't know the exact kind of input
-; input-microphone
-; input-microphone-internal
-; input-microphone-external
-; input-linein
-; input-video
-; input-radio
-; input-docking-microphone
-; input-docking-linein
-; input-docking
-;
-; We explicitly don't want to wrap the following sources:
-;
-; CD
-; Synth/MIDI
-; Phone
-; Mix
-; Digital/SPDIF
-; Master
-; PC Speaker
-;
-; See analog-output.conf.common for an explanation on the directives
-
-;;; 'Input Source Select'
-
-[Element Input Source Select]
-enumeration = select
-
-[Option Input Source Select:Input1]
-name = input
-priority = 10
-
-[Option Input Source Select:Input2]
-name = input
-priority = 5
-
-;;; 'Input Source'
-
-[Element Input Source]
-enumeration = select
-
-[Option Input Source:Mic]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Microphone]
-name = input-microphone
-priority = 20
-
-[Option Input Source:Front Mic]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Front Microphone]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Internal Mic]
-name = input-microphone
-priority = 19
-
-[Option Input Source:Line]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line-In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Line In]
-name = input-linein
-priority = 18
-
-[Option Input Source:Docking-Station]
-name = input-docking
-priority = 17
-
-[Option Input Source:AUX IN]
-name = input
-priority = 10
-
-;;; 'Capture Source'
-
-[Element Capture Source]
-enumeration = select
-
-[Option Capture Source:TV Tuner]
-name = input-video
-
-[Option Capture Source:FM]
-name = input-radio
-
-[Option Capture Source:Mic/Line]
-name = input
-
-[Option Capture Source:Line/Mic]
-name = input
-
-[Option Capture Source:Mic]
-name = input-microphone
-
-[Option Capture Source:Microphone]
-name = input-microphone
-
-[Option Capture Source:Int Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Int DMic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Mic]
-name = input-microphone-internal
-
-[Option Capture Source:iMic]
-name = input-microphone-internal
-
-[Option Capture Source:i-Mic]
-name = input-microphone-internal
-
-[Option Capture Source:Internal Microphone]
-name = input-microphone-internal
-
-[Option Capture Source:Front Mic]
-name = input-microphone
-
-[Option Capture Source:Front Microphone]
-name = input-microphone
-
-[Option Capture Source:Rear Mic]
-name = input-microphone
-
-[Option Capture Source:Mic1]
-name = input-microphone
-
-[Option Capture Source:Mic2]
-name = input-microphone
-
-[Option Capture Source:D-Mic]
-name = input-microphone
-
-[Option Capture Source:IntMic]
-name = input-microphone-internal
-
-[Option Capture Source:ExtMic]
-name = input-microphone-external
-
-[Option Capture Source:Ext Mic]
-name = input-microphone-external
-
-[Option Capture Source:E-Mic]
-name = input-microphone-external
-
-[Option Capture Source:e-Mic]
-name = input-microphone-external
-
-[Option Capture Source:LineIn]
-name = input-linein
-
-[Option Capture Source:Analog]
-name = input
-
-[Option Capture Source:Line]
-name = input-linein
-
-[Option Capture Source:Line-In]
-name = input-linein
-
-[Option Capture Source:Line In]
-name = input-linein
-
-[Option Capture Source:Video]
-name = input-video
-
-[Option Capture Source:Aux]
-name = input
-
-[Option Capture Source:Aux0]
-name = input
-
-[Option Capture Source:Aux1]
-name = input
-
-[Option Capture Source:Aux2]
-name = input
-
-[Option Capture Source:Aux3]
-name = input
-
-[Option Capture Source:AUX IN]
-name = input
-
-[Option Capture Source:Aux In]
-name = input
-
-[Option Capture Source:AOUT]
-name = input
-
-[Option Capture Source:AUX]
-name = input
-
-[Option Capture Source:Cam Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 1]
-name = input-microphone
-
-[Option Capture Source:Digital Mic 2]
-name = input-microphone
-
-[Option Capture Source:Analog Inputs]
-name = input
-
-[Option Capture Source:Unknown1]
-name = input
-
-[Option Capture Source:Unknown2]
-name = input
-
-[Option Capture Source:Docking-Station]
-name = input-docking
-
-[Option Capture Source:Dock Mic]
-name = input-docking-microphone
-
-;;; 'Mic Jack Mode'
-
-[Element Mic Jack Mode]
-enumeration = select
-
-[Option Mic Jack Mode:Mic In]
-name = input-microphone
-
-[Option Mic Jack Mode:Line In]
-name = input-linein
-
-;;; 'Digital Input Source'
-
-[Element Digital Input Source]
-enumeration = select
-
-[Option Digital Input Source:Analog Inputs]
-name = input
-
-[Option Digital Input Source:Digital Mic 1]
-name = input-microphone
-
-[Option Digital Input Source:Digital Mic 2]
-name = input-microphone
-
-;;; Various Boosts
-
-[Element Capture Boost]
-switch = select
-
-[Option Capture Boost:on]
-name = input-boost-on
-
-[Option Capture Boost:off]
-name = input-boost-off
-
-[Element Auto Gain Control]
-switch = select
-
-[Option Auto Gain Control:on]
-name = input-agc-on
-
-[Option Auto Gain Control:off]
-name = input-agc-off
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Headphone2' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 89
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the second headphones, not
-; the first headphones. But it should not hurt if we leave the
-; headphone jack enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Headphone' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 90
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-[Element Headphone]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the first headphones, not
-; the second headphones. But it should not hurt if we leave the second
-; headphone jack enabled nonetheless.
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = off
-volume = off
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for usage in laptops that have a seperate LFE speaker
-; connected to the Master mono connector
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 40
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all-no-lfe
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for usage on boards that have a seperate Mono output plug.
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 50
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = off
-volume = off
-
-[Element Master Mono]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = off
-volume = off
-
-[Element Rear]
-switch = off
-volume = off
-
-[Element Surround]
-switch = off
-volume = off
-
-[Element Side]
-switch = off
-volume = off
-
-[Element Center]
-switch = off
-volume = off
-
-[Element LFE]
-switch = off
-volume = off
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Path for mixers that have a 'Speaker' control
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 100
-
-[Element Hardware Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the speaker, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = mute
-volume = zero
-
-[Element Headphone2]
-switch = mute
-volume = zero
-
-[Element Speaker]
-required = any
-switch = mute
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Front]
-switch = mute
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = mute
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = mute
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = mute
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = mute
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Intended for the 'default' output. Note that a-o-speaker.conf has a
-; higher priority than this
-;
-; See analog-output.conf.common for an explanation on the directives
-
-[General]
-priority = 99
-
-[Element Hardware Master]
-switch = ignore
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master]
-switch = ignore
-volume = ignore
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element Master Mono]
-switch = off
-volume = off
-
-; This profile path is intended to control the default output, not the
-; headphones. But it should not hurt if we leave the headphone jack
-; enabled nonetheless.
-[Element Headphone]
-switch = ignore
-volume = zero
-
-[Element Headphone2]
-switch = ignore
-volume = zero
-
-[Element Speaker]
-switch = ignore
-volume = off
-
-[Element Front]
-switch = ignore
-volume = merge
-override-map.1 = all-front
-override-map.2 = front-left,front-right
-
-[Element Rear]
-switch = ignore
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Surround]
-switch = ignore
-volume = merge
-override-map.1 = all-rear
-override-map.2 = rear-left,rear-right
-
-[Element Side]
-switch = ignore
-volume = merge
-override-map.1 = all-side
-override-map.2 = side-left,side-right
-
-[Element Center]
-switch = ignore
-volume = merge
-override-map.1 = all-center
-override-map.2 = all-center,all-center
-
-[Element LFE]
-switch = ignore
-volume = merge
-override-map.1 = lfe
-override-map.2 = lfe,lfe
-
-.include analog-output.conf.common
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Common part of all paths
-
-; So here's generally how mixer paths are used by PA: PA goes through
-; a mixer path file from top to bottom and checks if a mixer element
-; described therein exists. If so it is added to the list of mixer
-; elements PA will control, keeping the order it read them in. If a
-; mixer element described here has set the required= or
-; required-absent= directives a path might not be accepted as valid
-; and is ignored in its entirety (see below). However usually if a
-; element listed here is missing this one element is ignored but not
-; the entire path.
-;
-; When a device shall be muted/unmuted *all* elements listed in a path
-; file with "switch = mute" will be toggled.
-;
-; When a device shall change its volume, PA will got through the list
-; of all elements with "volume = merge" and set the volume on the
-; first element. If that element does not support dB volumes, this is
-; where the story ends. If it does support dB volumes, PA divides the
-; requested volume by the volume that was set on this element, and
-; then go on to the next element with "volume = merge" and then set
-; that there, and so on. That way the first volume element in the
-; path will be the one that does the 'biggest' part of the overall
-; volume adjustment, with the remaining elements usually being set to
-; some value next to 0dB. This logic makes sure we get the full range
-; over all volume sliders and a very high granularity of volumes
-; already in hardware.
-;
-; All switches and enumerations set to "select" are exposed via the
-; "port" functionality of sinks/sources. Basically every possible
-; switch setting and every possible enumeration setting will be
-; combined and made into a "port". So make sure you don't list too
-; many switches/enums for exposing, because the number of ports might
-; rise exponentially.
-;
-; Only one path can be selected at a time. All paths that are valid
-; for an audio device will be exposed as "port" for the sink/source.
-
-
-; [General]
-; priority = ... # Priority for this path
-; description = ...
-;
-; [Option ...:...] # For each option of an enumeration or switch element
-; # that shall be exposed as a sink/source port. Needs to
-; # be named after the Element, followed by a colon, followed
-; # by the option name, resp. on/off if the element is a switch.
-; name = ... # Logical name to use in the path identifier
-; priority = ... # Priority if this is made into a device port
-;
-; [Element ...] # For each element that we shall control
-; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available,
-; # otherwise don't consider this path valid for the card
-; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not
-; # available, otherwise don't consider this path valid for the card
-;
-; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
-; # always set it to off, always to on, or make it selectable as port.
-; # If set to 'select' you need to define an Option section for on
-; # and off
-; volume = ignore | merge | off | zero # What to do with this volume: ignore it, merge it into the device
-; # volume slider, always set it to the lowest value possible, or always
-; # set it to 0 dB (for whatever that means)
-; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable
-; # via device ports. If set to 'select' you need to define an Option section
-; # for each of the items you want to expose
-; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be
-; # set the direction of the PCM device is opened as. Generally this doesn't need to be set
-; # unless you have a broken driver that has playback controls marked for capture or vice
-; # versa
-; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too?
-;
-; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel
-; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels
-; # Override maps should list for each element channel which high-level channels it controls via a
-; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
-; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
-; # channels in a mask
-
-[Element PCM]
-switch = ignore
-volume = merge
-override-map.1 = all
-override-map.2 = all-left,all-right
-
-[Element External Amplifier]
-switch = select
-
-[Option External Amplifier:on]
-name = output-amplifier-on
-priority = 10
-
-[Option External Amplifier:off]
-name = output-amplifier-off
-priority = 0
-
-;;; 'Analog Output'
-
-[Element Analog Output]
-enumeration = select
-
-[Option Analog Output:Speakers]
-name = output-speaker
-priority = 10
-
-[Option Analog Output:Headphones]
-name = output-headphones
-priority = 9
-
-[Option Analog Output:FP Headphones]
-name = output-headphones
-priority = 8
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Default profile definitions for the ALSA backend of PulseAudio. This
-; is used as fallback for all cards that have no special mapping
-; assigned. (and should be good enough for the vast majority of
-; cards). Use the udev property PULSE_PROFILE_SET to assign a
-; different profile set than this one to a device. So what is this
-; about? Simply, what we do here is map ALSA devices to how they are
-; exposed in PA. We say which ALSA device string to use to open a
-; device, which channel mapping to use then, and which mixer path to
-; use. This is encoded in a 'mapping'. Multiple of these mappings can
-; be bound together in a 'profile' which is then directly exposed in
-; the UI as a card profile. Each mapping assigned to a profile will
-; result in one sink/source to be created if the profile is selected
-; for the card.
-
-; [General]
-; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate
-; # them by combining every input mapping with every output mapping.
-;
-; [Mapping id]
-; device-strings = ... # ALSA device string. %f will be replaced by the card identifier.
-; channel-map = ... # Channel mapping to use for this device
-; description = ...
-; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed.
-; # If multiple are found to be working they will be available as device ports
-; paths-output = ...
-; element-input = ... # Instead of configuring a full mixer path simply configure a single
-; # mixer element for volume/mute handling
-; element-output = ...
-; priority = ...
-; direction = any | input | output # Only useful for?
-;
-; [Profile id]
-; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be
-; # defined in this file too
-; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be
-; # defined in this file too
-; description = ...
-; priority = ... # Numeric value to deduce priority for this profile
-; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile
-; # will be assumed as working without probing. Makes initialization
-; # a bit faster but only works if the card is really known well.
-
-[General]
-auto-profiles = yes
-
-[Mapping analog-mono]
-device-strings = hw:0
-channel-map = mono
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 1
-
-[Mapping analog-stereo]
-device-strings = front:%f hw:0
-channel-map = left,right
-paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
-paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
-priority = 10
-
-[Mapping analog-surround-40]
-device-strings = surround40:%f
-channel-map = front-left,front-right,rear-left,rear-right
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping analog-surround-41]
-device-strings = surround41:%f
-channel-map = front-left,front-right,rear-left,rear-right,lfe
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 8
-direction = output
-
-[Mapping analog-surround-50]
-device-strings = surround50:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping analog-surround-51]
-device-strings = surround51:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 8
-direction = output
-
-[Mapping analog-surround-71]
-device-strings = surround71:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-description = Analog Surround 7.1
-paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
-priority = 7
-direction = output
-
-[Mapping iec958-stereo]
-device-strings = iec958:%f
-channel-map = left,right
-priority = 5
-
-[Mapping iec958-surround-40]
-device-strings = iec958:%f
-channel-map = front-left,front-right,rear-left,rear-right
-priority = 1
-
-[Mapping iec958-ac3-surround-40]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right
-priority = 2
-direction = output
-
-[Mapping iec958-ac3-surround-51]
-device-strings = a52:%f
-channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 3
-direction = output
-
-[Mapping hdmi-stereo]
-device-strings = hdmi:%f
-channel-map = left,right
-priority = 4
-direction = output
-
-; An example for defining multiple-sink profiles
-#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
-#description = Foobar
-#output-mappings = analog-stereo iec958-stereo
-#input-mappings = analog-stereo
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Native Instruments Audio 4 DJ
-;
-; This card has two stereo pairs of input and two stereo pairs of
-; output, named channels A and B. Channel B has an additional
-; Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b-output]
-description = Analog Stereo Channel B (Headphones)
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-b-input]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b-output
-input-mappings = analog-stereo-a analog-stereo-b-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-input-mappings = analog-stereo-b-input
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B (Headphones)
-output-mappings = analog-stereo-b-output
-priority = 6
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b-input
-priority = 1
-skip-probe = yes
+++ /dev/null
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Lesser General Public License as
-# published by the Free Software Foundation; either version 2.1 of the
-# License, or (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-; Native Instruments Audio 8 DJ
-;
-; This card has four stereo pairs of input and four stereo pairs of
-; output, named channels A to D. Channel C has an additional Mic/Line
-; connector, channel D an additional Headphone connector.
-;
-; We knowingly only define a subset of the theoretically possible
-; mapping combinations as profiles here.
-;
-; See default.conf for an explanation on the directives used here.
-
-[General]
-auto-profiles = no
-
-[Mapping analog-stereo-a]
-description = Analog Stereo Channel A
-device-strings = hw:%f,0,0
-channel-map = left,right
-
-[Mapping analog-stereo-b]
-description = Analog Stereo Channel B
-device-strings = hw:%f,0,1
-channel-map = left,right
-
-# Since we want to set a different description for channel C's/D's input
-# and output we define two seperate mappings for them
-[Mapping analog-stereo-c-output]
-description = Analog Stereo Channel C
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-c-input]
-description = Analog Stereo Channel C (Line/Mic)
-device-strings = hw:%f,0,2
-channel-map = left,right
-direction = input
-
-[Mapping analog-stereo-d-output]
-description = Analog Stereo Channel D (Headphones)
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = output
-
-[Mapping analog-stereo-d-input]
-description = Analog Stereo Channel D
-device-strings = hw:%f,0,3
-channel-map = left,right
-direction = input
-
-[Profile output:analog-stereo-all+input:analog-stereo-all]
-description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones)
-output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input
-priority = 100
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-c]
-description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-c-input
-priority = 90
-skip-probe = yes
-
-[Profile output:analog-stereo-c-d+input:analog-stereo-c-d]
-description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic)
-output-mappings = analog-stereo-c-output analog-stereo-d-output
-input-mappings = analog-stereo-c-input analog-stereo-d-input
-priority = 80
-skip-probe = yes
-
-[Profile output:analog-stereo-a+input:analog-stereo-a]
-description = Analog Stereo Duplex Channel A
-output-mappings = analog-stereo-a
-input-mappings = analog-stereo-a
-priority = 50
-skip-probe = yes
-
-[Profile output:analog-stereo-b+input:analog-stereo-b]
-description = Analog Stereo Duplex Channel B
-output-mappings = analog-stereo-b
-input-mappings = analog-stereo-b
-priority = 40
-skip-probe = yes
-
-[Profile output:analog-stereo-c+input:analog-stereo-c]
-description = Analog Stereo Duplex Channel C (Line/Mic)
-output-mappings = analog-stereo-c-output
-input-mappings = analog-stereo-c-input
-priority = 60
-skip-probe = yes
-
-[Profile output:analog-stereo-d+input:analog-stereo-d]
-description = Analog Stereo Duplex Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-input-mappings = analog-stereo-d-input
-priority = 70
-skip-probe = yes
-
-[Profile output:analog-stereo-a]
-description = Analog Stereo Output Channel A
-output-mappings = analog-stereo-a
-priority = 6
-skip-probe = yes
-
-[Profile output:analog-stereo-b]
-description = Analog Stereo Output Channel B
-output-mappings = analog-stereo-b
-priority = 5
-skip-probe = yes
-
-[Profile output:analog-stereo-c]
-description = Analog Stereo Output Channel C
-output-mappings = analog-stereo-c-output
-priority = 7
-skip-probe = yes
-
-[Profile output:analog-stereo-d]
-description = Analog Stereo Output Channel D (Headphones)
-output-mappings = analog-stereo-d-output
-priority = 8
-skip-probe = yes
-
-[Profile input:analog-stereo-a]
-description = Analog Stereo Input Channel A
-input-mappings = analog-stereo-a
-priority = 2
-skip-probe = yes
-
-[Profile input:analog-stereo-b]
-description = Analog Stereo Input Channel B
-input-mappings = analog-stereo-b
-priority = 1
-skip-probe = yes
-
-[Profile input:analog-stereo-c]
-description = Analog Stereo Input Channel C (Line/Mic)
-input-mappings = analog-stereo-c-input
-priority = 4
-skip-probe = yes
-
-[Profile input:analog-stereo-d]
-description = Analog Stereo Input Channel D
-input-mappings = analog-stereo-d-input
-priority = 3
-skip-probe = yes
--- /dev/null
+<manifest>
+ <request>
+ <domain name="_" />
+ </request>
+</manifest>
--- /dev/null
+pcm. !default {
+ type asym
+ playback.pcm {
+ type hw
+ card 0
+ device 0
+ }
+ capture.pcm {
+ type hw
+ card 0
+ device 0
+ }
+}
+
+ctl. !default {
+ type hw
+ card 0
+}
+
+pcm. AIF2{
+ type hw
+ card 0
+ device 1
+ format S16_LE
+ channels 2
+ rate 8000
+}
+
+pcm. AIF3{
+ type hw
+ card 0
+ device 2
+ format S16_LE
+ channels 2
+ rate 8000
+}
+
+pcm. AIF4{
+ type hw
+ card 0
+ device 4
+ format S16_LE
+ channels 2
+ rate 44100
+}
+
+ctl. wm1811 {
+ type hw
+ card 0
+}
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA.
+
+## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
+## more information. Default values are commented out. Use either ; or # for
+## commenting.
+
+; default-sink =
+; default-source =
+; default-server =
+; default-dbus-server =
+
+; autospawn = yes
+; daemon-binary = /usr/bin/pulseaudio
+; extra-arguments = --log-target=syslog
+
+; cookie-file =
+
+; enable-shm = yes
+shm-size-bytes = 4194304 # setting this 0 will use the system-default, usually 64 MiB
+
+; auto-connect-localhost = no
+; auto-connect-display = no
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values are commented out. Use either ; or # for
+## commenting.
+
+daemonize = yes
+; fail = yes
+; allow-module-loading = yes
+; allow-exit = yes
+; use-pid-file = yes
+system-instance = yes
+; local-server-type = user
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+; high-priority = yes
+; nice-level = -11
+
+realtime-scheduling = yes
+realtime-priority = 5
+
+; exit-idle-time = 20
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = /etc/pulse/default.pa
+
+log-target = dlog
+log-level = debug
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+resample-method = ffmpeg
+; enable-remixing = yes
+; enable-lfe-remixing = no
+
+flat-volumes = no
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 1000000
+
+; default-sample-format = s16le
+; default-sample-rate = 44100
+alternate-sample-rate = 48000
+; default-sample-channels = 2
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25
--- /dev/null
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.nofail
+
+### Load something into the sample cache
+#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
+#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
+#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Use the static hardware detection module (for systems that lack udev support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect channels=2
+.fail
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-policy.so
+load-module module-bluetooth-policy
+.endif
+
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+.ifexists module-console-kit.so
+load-module module-console-kit
+.endif
+.ifexists module-systemd-login.so
+load-module module-systemd-login
+.endif
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music/video streams when a phone stream is active
+load-module module-role-cork
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Load DBus protocol
+.ifexists module-dbus-protocol.so
+load-module module-dbus-protocol
+.endif
+
+
+load-module module-switch-on-port-available
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input
--- /dev/null
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started in system
+# mode.
+
+### Custom policy module to route between bt<=speaker
+load-module module-policy
+
+#load-module module-alsa-sink sink_name=alsa_output.0.analog-stereo device=hw:0,0 fragment_size=8192
+#load-module module-alsa-source source_name=alsa_input.0.analog-stereo device=hw:0,0 fragment_size=8192
+#load-module module-alsa-source source_name=alsa_input.8.analog-stereo device=hw:0,8 mmap=0
+#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 tsched_buffer_size=2048576
+#load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,0 fragment_size=8192 mmap=1
+load-module module-alsa-sink sink_name=alsa_output.1.analog-stereo device=hw:0,1 fragment_size=8192 mmap=1 tsched=1 tsched_buffer_size=262144 fixed_latency_range=1
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Use the static hardware detection module (for systems that lack udev/hal support)
+load-module module-detect
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+load-module module-bluetooth-policy
+
+load-module module-bluetooth-discover
+#load-module module-bluetooth-discover enable_scmst=true
+
+### Automatically restore the volume of streams and devices
+#load-module module-stream-restore
+#load-module module-device-restore
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+.ifexists module-dbus-protocol.so
+### If you want to allow TCP connections, set access to "remote" or "local,remote".
+load-module module-dbus-protocol access=local
+.endif
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle timeout=1
+
+### Enable positioned event sounds
+#load-module module-position-event-sounds
+
+### Set default source (not to use alsa_sink monitor which is index 0)
+#set-default-source alsa_input.0.analog-stereo
+
+load-module module-null-sink
+load-module module-remap-sink sink_name=mono_alsa master=alsa_output.1.analog-stereo channels=1
+load-sample camera-shutter /usr/share/sounds/mm-camcorder/capture_shutter_02.wav
+load-sample recording-stop /usr/share/sounds/mm-camcorder/recording_stop_01.wav
--- /dev/null
+
+[speaker]
+system = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000
+notification = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000
+alarm = 0.00000, 0.00891, 0.01413, 0.02239, 0.03162, 0.03981, 0.05012, 0.06310, 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+ringtone = 0.00000, 0.00891, 0.01413, 0.02239, 0.03162, 0.03981, 0.05012, 0.06310, 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+media = 0.00000, 0.00891, 0.01413, 0.02239, 0.03162, 0.03981, 0.05012, 0.06310, 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+call = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+voip = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+voice = 0.00000, 0.00891, 0.01413, 0.02239, 0.03162, 0.03981, 0.05012, 0.06310, 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+gain = 0.10000, 0.90000, 0.69104, 1.00000, 1.00000, 1.00000, 1.00000, 0.79370, 0.96549
+
+[headset]
+system = 0.00000, 0.01259, 0.01585, 0.01995, 0.02512, 0.03162, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623
+notification = 0.00000, 0.00398, 0.00501, 0.00631, 0.00794, 0.01000, 0.01259, 0.01585, 0.01995, 0.02512, 0.03162, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000
+alarm = 0.00000, 0.00398, 0.00501, 0.00631, 0.00794, 0.01000, 0.01259, 0.01585, 0.01995, 0.02512, 0.03162, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000
+ringtone = 0.00000, 0.00398, 0.00501, 0.00631, 0.00794, 0.01000, 0.01259, 0.01585, 0.01995, 0.02512, 0.03162, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000
+media = 0.00000, 0.00398, 0.00794, 0.01585, 0.03162, 0.05623, 0.07943, 0.11220, 0.14125, 0.17783, 0.22387, 0.28184, 0.35481, 0.50119, 0.70795, 1.00000
+call = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+voip = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+voice = 0.00000, 0.00398, 0.00794, 0.01585, 0.03162, 0.05623, 0.07943, 0.11220, 0.14125, 0.17783, 0.22387, 0.28184, 0.35481, 0.50119, 0.70795, 1.00000
+gain = 0.10000, 0.92832, 1.00000, 1.00000, 0.79370, 0.79370, 0.36840, 0.92832, 1.00000
+
+[btheadset]
+system = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000
+notification = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000
+alarm = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+ringtone = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000
+media = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+call = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+voip = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+voice = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+gain = 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000
+
+[hdmi]
+system = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000
+notification = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000
+alarm = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+ringtone = 0.00000, 0.03981, 0.05012, 0.06310, 0.07943, 0.10000, 0.12589, 0.15849, 0.19953, 0.25119, 0.31623, 0.39811, 0.50119, 0.63096, 0.79433, 1.00000
+media = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+call = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+voip = 0.08913, 0.12589, 0.17783, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+voice = 0.00000, 0.00794, 0.01122, 0.01585, 0.02239, 0.03162, 0.04467, 0.06310, 0.07943, 0.11220, 0.15849, 0.25119, 0.35481, 0.50119, 0.70795, 1.00000
+gain = 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000, 1.00000
+
--- /dev/null
+omx_mpeg2dec,
+ type=GstOmxMpeg2Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.mp2,
+ sink="video/mpeg, mpegversion=(int)[1,2], systemstream=false, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max]; ",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_mpeg4dec,
+ type=GstOmxMpeg4Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.mp4,
+ sink="video/x-msmpeg, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], format=(fourcc){DIV3}; video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max]; video/x-divx, divxversion=(int)[4,5], width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max]; video/x-xvid, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max]; video/x-3ivx, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_h264dec,
+ type=GstOmxH264Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.avc,
+ sink="video/x-h264, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_h263dec,
+ type=GstOmxH263Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.h263,
+ sink="video/x-h263, variant=(string)itu, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_wmvdec,
+ type=GstOmxWmvDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.wmv,
+ sink="video/x-wmv, wmvversion=(int)3, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_vp8dec,
+ type=GstOmxVp8Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.vp8,
+ sink="video/x-vp8, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_rvdec,
+ type=GstOmxRvDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.rv,
+ sink="video/x-pn-realvideo, rmversion=(int)[3,4], format=(fourcc){RV30,RV40}, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_avsdec,
+ type=GstOmxAvsDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.avs,
+ sink="video/x-avs, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_mjpegdec,
+ type=GstOmxMjpegDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mjpeg,
+ sink="video/x-jpeg, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max];",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_mp3dec,
+ type=GstOmxMp3Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/mpeg, mpegversion=(int)1, layer=(int)[1,3], parsed=true",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_aacdec,
+ type=GstOmxAacDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-aac;audio/mpeg, mpegversion=(int){2,4}, framed=true",
+ src="audio/x-raw-int, hassubdata=true",
+ rank=257;
+
+omx_ac3dec,
+ type=GstOmxAc3Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-ac3, framed=true;audio/x-eac3, framed=true;audio/ac3, framed=true",
+ src="audio/x-raw-int, hassubdata=true",
+ rank=257;
+
+omx_adpcmdec,
+ type=GstOmxAdpcmDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-adpcm",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_wmadec,
+ type=GstOmxWmaDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-wma",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_dtsdec,
+ type=GstOmxDtsDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-dts, framed=true",
+ src="audio/x-raw-int, hassubdata=true",
+ rank=257;
+
+omx_vorbisdec,
+ type=GstOmxVorbisDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-vorbis",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_radec,
+ type=GstOmxRaDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-pn-realaudio",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_g711dec,
+ type=GstOmxG711Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-alaw; audio/x-mulaw",
+ src="audio/x-raw-int",
+ rank=257;
--- /dev/null
+omx_tz_mpeg2dec,
+ type=GstOmxTZMpeg2Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.mp2,
+ sink="video/mpeg, mpegversion=(int)[1,2], systemstream=false, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true; ",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_tz_mpeg4dec,
+ type=GstOmxTZMpeg4Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.mp4,
+ sink="video/x-msmpeg, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], format=(fourcc){DIV3}, secure=(boolean)true; video/mpeg, mpegversion=(int)4, systemstream=false, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true; video/x-divx, divxversion=(int)[4,5], width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true; video/x-xvid, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true; video/x-3ivx, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+omx_tz_h264dec,
+ type=GstOmxTZH264Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.avc,
+ sink="video/x-h264, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_tz_h263dec,
+ type=GstOmxTZH263Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.h263,
+ sink="video/x-h263, variant=(string)itu, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_tz_wmvdec,
+ type=GstOmxTZWmvDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.wmv,
+ sink="video/x-wmv, wmvversion=(int)3, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_tz_vp8dec,
+ type=GstOmxTZVp8Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.vp8,
+ sink="video/x-vp8, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_tz_rvdec,
+ type=GstOmxTZRvDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.rv,
+ sink="video/x-pn-realvideo, rmversion=(int)[3,4], format=(fourcc){RV30,RV40}, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_tz_avsdec,
+ type=GstOmxTZAvsDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mfc.avs,
+ sink="video/x-avs, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_tz_mjpegdec,
+ type=GstOmxTZMjpegDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.video_decoder.mjpeg,
+ sink="video/x-jpeg, width=(int)[0,4096], height=(int)[0,4096], framerate=(fraction)[0,max], secure=(boolean)true;",
+ src="video/x-raw-yuv, format=(fourcc){I420}, width=(int)[1,4096], height=(int)[1,4096], framerate=(fraction)[0,max];",
+ rank=257;
+
+omx_tz_mp3dec,
+ type=GstOmxTZMp3Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/mpeg, mpegversion=(int)1, layer=(int)[1,3], parsed=true, secure=(boolean)true",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_tz_aacdec,
+ type=GstOmxTZAacDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-aac;audio/mpeg, mpegversion=(int){2,4}, framed=true, secure=(boolean)true",
+ src="audio/x-raw-int",
+ rank=257;
+omx_tz_ac3dec,
+ type=GstOmxTZAc3Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-ac3,secure=(boolean)true;audio/x-eac3,secure=(boolean)true;audio/ac3,secure=(boolean)true;",
+ src="audio/x-raw-int",
+ rank=257;
+omx_tz_adpcmdec,
+ type=GstOmxTZAdpcmDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-adpcm, secure=(boolean)true",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_tz_wmadec,
+ type=GstOmxTZWmaDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-wma, secure=(boolean)true",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_tz_dtsdec,
+ type=GstOmxTZDtsDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-dts, framed=true, secure=(boolean)true",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_tz_vorbisdec,
+ type=GstOmxTZVorbisDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-vorbis, secure=(boolean)true",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_tz_radec,
+ type=GstOmxTZRaDec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-pn-realaudio, secure=(boolean)true",
+ src="audio/x-raw-int",
+ rank=257;
+
+omx_tz_g711dec,
+ type=GstOmxTZG711Dec,
+ library-name=libSDP_OMX_Core.so.0,
+ component-name=OMX.SDP.AUDANY.Decoder,
+ sink="audio/x-alaw, secure=(boolean)true; audio/x-mulaw, secure=(boolean)true",
+ src="audio/x-raw-int",
+ rank=257;
--- /dev/null
+[aif]
+
+control aif before path set = no
+
+[debug]
+
+gain debug mode = no
+
--- /dev/null
+; < Camera/Camcorder Configure Main INI file >
+;
+; - Header List -
+; 1. General
+; 2. VideoInput
+; 3. AudioInput
+; 4. VideoOutput
+; 5. Capture
+; 6. Record
+; 7. VideoEncoder
+; 8. AudioEncoder
+; 9. ImageEncoder
+; 10. Mux
+;
+; - Note -
+; If you want to add a new header,
+; add a new enum value to "enum ConfigureCategoryMain"
+; and new default table for it in mm_camcorder_configure.c/.h
+;
+
+[General]
+SyncStateChange = 1
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap || NOT-USE-DEFAULT_VALUE
+;GSTInitOption = --gst-enable-tiny-registry --gst-disable-segtrap --gst-debug=3 || NOT-USE-DEFAULT_VALUE
+ModelName = GT-TIZEN
+;DisabledAttributes = camera-optical-zoom camera-af-touch-x camera-af-touch-y camera-exposure-value camera-f-number camera-shutter-speed camera-hold-af-after-capturing filter-flip filter-hue display-src-x display-src-y display-src-width display-src-height tag-image-description strobe-control strobe-capabilities strobe-mode detect-mode detect-number detect-focus-select detect-select-number detect-status || NO_DEFAULT_VALUE
+
+[VideoInput]
+UseConfCtrl = 1
+ConfCtrlFile0 = mmfw_camcorder_dev_video_pri.ini
+ConfCtrlFile1 = mmfw_camcorder_dev_video_sec.ini
+VideosrcElement = v4l2src | 1,0 | do-timestamp,1
+UseVideoscale = 1
+VideoscaleElement = videoscale | 3,0 | width,320 | height,240 | method,1
+UseZeroCopyFormat = 0
+DeviceCount = 1
+
+[AudioInput]
+AudiosrcElement = audiotestsrc | 4,0 | do-timestamp,1 | slave-method,3 | latency,0 | is-live,1
+;AudiosrcElement = alsasrc | 3,0 | do-timestamp,1 | slave-method,3 | latency,0
+AudiomodemsrcElement = voicedatasrcbin | 0,0
+
+[VideoOutput]
+; DisplayDevice
+;;; 0: MAIN LCD, 1: SUB LCD, 2:TV OUT, 3: MAIN LCD and SUB LCD, 4: MAIN LCD and TV OUT
+DisplayDevice = 0 || 0
+; DisplayMode
+;;; 0: Default, 1: Pri Video ON and Sec Video Full-Screen, 2: Pri Video OFF and Sec Video Full-Screen
+DisplayMode = 0,1,2 || 0
+; Videosink
+;;; 0: X surface, 1: Evas surface, 2: GL surface, 3: NULL surface
+Videosink = 0,1,3 || 1
+VideosinkElementX = xvimagesink | 6,0 | draw-borders,0 | force-aspect-ratio,1 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0
+VideosinkElementEvas = evasimagesink | 4,0 | enable-last-buffer,0 | qos,0 | sync,0 | show-preroll-frame,0
+VideosinkElementNull = fakesink | 4,0 | qos,0 | sync,0 | enable-last-buffer,0 | show-preroll-frame,0
+UseVideoscale = 1
+VideoscaleElement = fimcconvert | 1,0 | rotang,0
+;VideoscaleElement = videoscale
+
+[VideoEncoder]
+MPEG4 = avenc_mpeg4 | 0,0
+
+[AudioEncoder]
+AMR = amrnbenc | 0,0
+AAC = avenc_aac | 1,0 | compliance,-2
+WAVE = wavenc | 0,0
+
+[ImageEncoder]
+JPEG = jpegenc | 0,0
+;PNG = pngenc | 0,0
+
+[Capture]
+UseEncodebin = 1
+UseCaptureMode = 0
+VideoscaleElement = videoscale | 1,0 | method,1
+
+[Record]
+UseAudioEncoderQueue = 1
+UseVideoEncoderQueue = 0
+VideoProfile = 0
+VideoAutoAudioConvert = 1
+VideoAutoAudioResample = 0
+VideoAutoColorSpace = 1
+AudioProfile = 1
+AudioAutoAudioConvert = 1
+AudioAutoAudioResample = 0
+AudioAutoColorSpace = 0
+ImageProfile = 2
+ImageAutoAudioConvert = 0
+ImageAutoAudioResample = 0
+ImageAutoColorSpace = 1
+RecordsinkElement = filesink | 1,0 | async,0
+UseNoiseSuppressor = 0
+DropVideoFrame = 0
+PassFirstVideoFrame = 0
+
+[Mux]
+3GP = avmux_3gp | 0,0
+AMR = avmux_amr | 0,0
+MP4 = avmux_mp4 | 0,0
+AVI = avimux | 0,0
+MATROSKA = matroskamux | 0,0
+WAV = wavenc | 0,0
+AAC = avmux_adts | 0,0
+M2TS = mpegtsmux | 0,0
+
--- /dev/null
+; < Camera/Camcorder Configure Control INI file >
+;
+; - Header List -
+; 1. Camera
+; 2. Strobe
+; 3. Effect
+; 4. Photograph
+; 5. Capture
+; 6. Detect
+;
+; - Note -
+; If you want to add a new header,
+; add a new enum value to "enum ConfigureCategoryControl"
+; and new default table for it in mm_camcorder_configure.c/.h
+;
+
+[Camera]
+; Input index - real setting value
+;;; 0:PRIMARY_CAMERA, 1:SECONDARY_CAMERA
+; Input index - MSL value(convert array index)
+;;; -1:NONE, 0:CAMERA0, 1:CAMERA1
+InputIndex = 0,-255 || 0
+DeviceName = USB_CAMERA
+PreviewResolution = 320,240 | 640,480 || 320,240
+CaptureResolution = 320,240 | 640,480 || 640,480
+VideoResolution = 320,240 | 640,480 || 640,480
+FPS = 0,15,30 || 15
+; PictureForamt - MSL value
+;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264
+PictureFormat = 7 || 7
+Overlay = 0,1 || 1
+; Recommend display rotation
+;;; 0:NONE, 1:90, 2:180, 3:270
+RecommendDisplayRotation = 0
+; Recommend preview format for capture
+;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264
+RecommendPreviewFormatCapture = 7
+; Recommend preview format for record
+;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY, 15:ENCODED_H264
+RecommendPreviewFormatRecord = 7
+; Recommend preview resolution
+;;; 0: NORMAL ratio(4:3), 1: WIDE ratio(16:9), 2: SQUARE ratio(1:1)
+RecommendPreviewResolution = 320,240 | 320,240 | 320,240 || 320,240
+; Camera facing direction
+;;; 0:REAR, 1:FRONT
+FacingDirection = 0
+
+
+[Strobe]
+;StrobeControl - Not support
+;StrobeCapabilities - Not support
+; Strobe mode - real setting value
+;;; 0:BASE, 1:OFF, 2:AUTO, 3:ON, 4:TORCH, 5:MAX
+; Strobe mode - MSL value(convert array index)
+;;; 0:OFF, 1:ON, 2:AUTO, 3:REDEYE_REDUCTION, 4:SLOW_SYNC, 5:FRONT_CURTAIN, 6:REAR_CURTAIN, 7:PERMANENT
+StrobeMode = 1,3,2,-255,-255,-255,-255,4 || 2
+;StrobeStatus - Not support
+;StrobeEV - Not support
+
+
+[Effect]
+Brightness = 0,8 || 4
+;Contrast = 1,7 || 4
+;Saturation = 0,4 || 2
+;Sharpness = 0,4 || 2
+
+; White balance - real setting value
+;;; 0:AUTO, 1:DAYLIGHT, 2:CLOUDY, 3:TUNGSTEN, 4:FLUORESCENT
+; White balance - MSL value(convert array index)
+;;; 0:NONE, 1:AUTO, 2:DAYLIGHT, 3:CLOUDY, 4:FLUORESCENT, 5:INCANDESCENT, 6:SHADE, 7:HORIZON, 8:FLASH, 9:CUSTOM
+WhiteBalance = -255,0,-255,-255,-255,-255,-255,-255,-255,-255 || 0
+
+; Color tone - real setting value
+;;; 1:NONE, 2:MONO, 3:SEPIA, 4:AQUA, 5:ANTIQUE, 6:NEGATIVE, 7:SHARPEN, 8:SKETCH, 9:WASHED, 10:VINTAGE_WARM
+;;; 11:VINTAGE_COLD, 12:SOLARIZE, 13:POSTERIZE, 14:POINT_BLUE, 15:POINT_RED_YELLOW, 16:POINT_COLOR_3, 17:POINT_GREEN, 18:POINT_RED, 19:POINT_YELLOW, 20:CARTOONIZE
+; Color tone - MSL value(convert array index)
+;;; 0:NONE, 1:MONO, 2:SEPIA, 3:NEGATIVE, 4:BLUE, 5:GREEN, 6:AQUA, 7:VIOLET, 8:ORANGE, 9:GRAY, 10:RED,
+;;; 11:ANTIQUE, 12:WARM, 13:PINK, 14:YELLOW, 15:PURPLE, 16:EMBOSS, 17:OUTLINE, 18:SOLARIZATION, 19:SKETCH, 20:WASHED,
+;;; 21:VINTAGE_WARM, 22:VINTAGE_COLD, 23:POSTERIZATION, 24:CARTOON, 25:SELECTIVE_RED, 26:SELECTIVE_GREEN, 27:SELECTIVE_BLUE, 28:SELECTIVE_YELLOW, 29:SELECTIVE_RED_YELLOW
+ColorTone = 1,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 1
+; Flip - real setting value
+;;; 0:NONE, 1:VERTICAL, 2:HORIZONTAL
+; Flip - MSL value(convert array index)
+;;; 0:HORIZONTAL, 1:VERTICAL, 2:NONE
+;Flip = 2,1,0 || 0
+
+; Wide Dynamic Range - real setting value
+;;; 0:OFF, 1:ON
+; Wide Dynamic Range - MSL value(convert array index)
+;;; 0:OFF, 1:ON, 2:AUTO
+WDR = 0,-255,-255 || 0
+
+; Part color mode - real setting value
+;;; 0:OFF, 1:SWAP, 2:ACCENT
+; Part color mode - MSL value(convert array index)
+;;; 0:OFF, 1:SWAP, 2:ACCENT
+;PartColorMode = 0,1,2 || 0
+
+; Part color - real setting value
+;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
+;;; 11:GREEN_4, 12:COBALT, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
+; Part color - MSL value(convert array index)
+;;; 0:VIOLET, 1:PURPLE, 2:MAGENTA_1, 3:MAGENTA_2, 4:RED_1, 5:RED_2, 6:BROWN, 7:YELLOW, 8:GREEN_1, 9:GREEN_2, 10:GREEN_3,
+;;; 11:GREEN_4, 12:COBALT_BLUE, 13:CYAN, 14:BLUE_1, 15:BLUE_2, 16:GRAY
+;PartColor = 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 || 0
+
+
+[Photograph]
+;LensInit = 0,1 || 0
+;DigitalZoom = 0,10 || 0
+;OpticalZoom = 0,0 || 0
+
+; Focus mode - real setting value
+;;; 0:AUTO, 1:MANUAL, 2:PAN, 3:TOUCH_AUTO, 4:CONTINUOUS
+; Focus mode - MSL value(convert array index)
+;;; 0:NONE, 1:PAN, 2:AUTO, 3:MANUAL, 4:TOUCH_AUTO, 5:CONTINUOUS
+FocusMode = 0,-255,-255,-255,-255,-255 || 0
+
+; Auto focus type - real setting value
+;;; 0:NORMAL, 1:MACRO, 2:FULL
+; Auto focus - MSL value(convert array index)
+;;; 0:NONE, 1:NORMAL, 2:MACRO, 3:FULL
+AFType = 0,-255,-255,-255 || 0
+
+; Auto exposure type - real setting value
+;;; 0:BASE, 1:MATRIX, 2:CENTER, 3:SPOT, 4:MAX
+; Auto exposure mode - MSL value(convert array index)
+;;; 0,OFF 1,ALL 2,CENTER1 3,CENTER2 4,CENTER3 5,SPOT1 6,SPOT2 7,CUSTOM1 8,CUSTOM2
+AEType = -255,0,-255,-255,-255,-255,-255,-255,-255 || 0
+
+;ExposureValue - Not support
+;FNumber - Not support
+;ShutterSpeed - Not support
+
+; ISO - real setting value
+;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600
+; ISO - MSL value(convert array index)
+;;; 0:AUTO, 1:50, 2:100, 3:200, 4:400, 5:800, 6:1600, 7:3200
+ISO = 0,-255,-255,-255,-255,-255,-255,-255 || 0
+
+; Program mode - real setting value
+;;; 1:NONE, 2:PORTRAIT, 3:NIGHTSHOT, 4:BACK_LIGHT, 5:LANDSCAPE, 6:SPORTS, 7:PARTY_INDOOR, 8:BEACH_SNOW, 9:SUNSET, 10:DUSK_DAWN,
+;;; 11:FALL_COLOR, 12:FIREWORKS, 13:TEXT, 14:CANDLE_LIGHT
+; Program mode - MSL value(convert array index)
+;;; 0:NORMAL, 1:PORTRAIT, 2:LANDSCAPE, 3:SPORTS, 4:PARTY_N_INDOOR, 5:BEACH_N_INDOOR, 6:SUNSET, 7:DUSK_N_DAWN, 8:FALL_COLOR, 9:NIGHT_SCENE,
+;;; 10:FIREWORK, 11:TEXT, 12:SHOW_WINDOW, 13:CANDLE_LIGHT, 14:BACKLIGHT
+ProgramMode = 0,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255,-255 || 0
+
+; Anti-handshake - real setting value
+;;; 0:OFF, 1:ON
+; Anti-handshake - MSL value(convert array index)
+;;; 0:OFF, 1:ON, 2:AUTO, 3:MOVIE_ON
+AntiHandshake = 0,-255,-255,-255 || 0
+
+; Video-stabilization - real setting value
+;;; 0:OFF, 1:ON
+; Video-stabilization - MSL value(convert array index)
+;;; 0:OFF, 1:ON
+VideoStabilization = 0 || 0
+
+; Face zoom mode
+;;; 0:OFF, 1:ON
+FaceZoomMode = 0 || 0
+; Face zoom level
+FaceZoomLevel = 0,0 || 0
+
+
+[Capture]
+; Output mode
+;;; No need to convert
+;;; 0:NV12, 1:NV12T, 2:NV16, 3:NV21, 4:YUYV, 5:UYVY, 6:422P, 7:I420, 8:YV12, 9:RGB565, 10:RGB888, 11:RGBA, 12:ARGB, 13:ENCODED, 14:INTERLEAVED_JPEG_UYVY
+OutputMode = 7,13 || 13
+JpegQuality = 0,100 || 90
+MultishotNumber = 1,1 || 1
+SensorEncodedCapture = 0
+; Support HDR
+;;; 0: OFF, 1: ON, 2: ON and Original
+SupportHDR = 0,-255,-255 || 0
+
+
+[Detect]
+; Detect mode
+;;; 0:OFF, 1:ON
+DetectMode = 0,-255 || 0
+;DetectNumber - Not support
+;DetectFocusSelect - Not support
+;DetectSelectNumber - Not support
+;DetectStatus - Not support
+
--- /dev/null
+[general]
+
+; if disabled typefind element will used directely
+use decodebin = yes
+
+; for retransmission enable = yes, disable = no
+use rtp retransmission = no
+
+disable segtrap = yes ; same effect with --gst-disable-segtrap
+
+; set default videosink element according to video surface type(X, EVAS, NULL)
+videosink element x = xvimagesink
+videosink element evas = evasimagesink
+videosink element fake = fakesink
+
+video converter element =
+
+audiosink element = alsasink
+
+
+drmsrc element = filesrc
+
+; if yes. gstreamer will not update registry
+skip rescan = yes
+delay before repeat = 50 ; msec
+
+; comma separated list of tocken which elemnts has it in it's name will not be used
+;element exclude keyword = omx_mpeg2dec,omx_mpeg4dec,omx_h263dec,omx_wmvdec,omx_mp3dec,omx_mp3dec,omx_aacdec
+
+; ignore resume play just for debugging
+ignore first skip request = no
+
+;audio/video decode type(0:DEFAULT, 1:HW, 2:SW, 3:DISABLE)
+video decoder type = 0
+audio decoder type = 0
+
+async start = yes
+
+multiple codec supported = yes
+
+; parameters for initializing gstreamer
+; DEFAULT SET (--gst-debug=*:2)
+gstparam1 = --gst-debug=*:2
+gstparam2 =
+gstparam3 =
+gstparam4 =
+gstparam5 =
+
+; generating dot file representing pipeline state
+; DEFAULT MUST BE 'no'. If 'yes', mmplayer will set env-variable for it's session as "export GST_DEBUG_DUMP_DOT_DIR=/tmp/"
+generate dot = no
+
+; parameter for clock provide in audiosink
+provide clock for music = yes
+provide clock for movie = yes
+
+; allowed timeout for changing pipeline state
+live state change timeout = 30 ; sec
+localplayback state change timeout = 10 ; sec
+
+; delay in msec for sending EOS
+eos delay = 0 ; msec
+
+; for asm function enable = yes, disable = no
+enable asm = yes
+
+[http streaming]
+
+httpsrc element = souphttpsrc
+
+; if set, use file or not use memory for buffering
+http file buffer path = /opt/usr/media
+
+http buffering limit = 99.0 ; percent
+
+http max size bytes = 1048576 ; bytes
+
+http buffering time = 1.2
+
+http timeout = 30 ; sec
+
+
+[rtsp streaming]
+
+rtspsrc element = rtspsrc
+
+rtsp buffering time = 5000; msec
+
+rtsp rebuffering time = 15000; msec
+
+rtsp do typefinding = no; if no, caps on rtspsrc:src pad will be used for autoplugging
+
+rtsp error concealment = yes
+
+;transport to use, 7 for default (tcp+udp-multicast+udp-unicast), 4 for TCP
+rtsp lower protocol = 7;
+
+[hw accelation]
+use video hw accel = no
+
+
+[priority]
+
+use priority setting = no
+
+demux = 95
+
+videosink = 96
+
+audiosink = 97
+
+ringbuffer = 98
+
+[subtitle]
+; related to the textbin structure
+; if yes, textbin need to consider the external display to print subtitle
+support external display = no
+
+; subtitle default value when 'support external display = yes'
+mirroring width = 1920
+
+mirroring height = 1080
+
+font color = 0xffffffff
+
+font background color = 0x00000000
+
--- /dev/null
+[audio effect]
+; name of audio effect element
+audio effect element = audioeq
+
+; preset audio effect setting
+audio effect preset = no
+
+; custom audio effect setting (EQ/extension)
+audio effect custom = yes
+audio effect custom list = 0
+
+audio effect custom eq band num = 7 ; number of EQ bands
+audio effect custom eq band width = 33, 90, 242, 649, 1743, 4676, 12544 ; list of each EQ band width (Hz)
+audio effect custom eq band freq = 36, 98, 265, 711, 1907, 5117, 13727 ; list of each EQ band central frequency (Hz)
+
+audio effect custom min list = -12 ; list of minimum level value (the first element is for EQ, others for extension effect)
+audio effect custom max list = 12 ; list of maximum level value (the first element is for EQ, others for extension effect)
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where an 'Aux' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 90
+name = analog-input
+
+[Element Capture]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Mic]
+switch = off
+volume = off
+
+[Element Line]
+switch = off
+volume = off
+
+[Element Aux]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Video]
+switch = off
+volume = off
+
+[Element Mic/Line]
+switch = off
+volume = off
+
+[Element TV Tuner]
+switch = off
+volume = off
+
+[Element FM]
+switch = off
+volume = off
+
+.include analog-input.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where an 'FM' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 70
+name = analog-input-radio
+
+[Element Capture]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Mic]
+switch = off
+volume = off
+
+[Element Line]
+switch = off
+volume = off
+
+[Element Aux]
+switch = off
+volume = off
+
+[Element Video]
+switch = off
+volume = off
+
+[Element Mic/Line]
+switch = off
+volume = off
+
+[Element TV Tuner]
+switch = off
+volume = off
+
+[Element FM]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+.include analog-input.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'Line' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 90
+
+[Element Capture]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Mic]
+switch = off
+volume = off
+
+[Element Line]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Aux]
+switch = off
+volume = off
+
+[Element Video]
+switch = off
+volume = off
+
+[Element Mic/Line]
+switch = off
+volume = off
+
+[Element TV Tuner]
+switch = off
+volume = off
+
+[Element FM]
+switch = off
+volume = off
+
+.include analog-input.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'Mic/Line' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 90
+name = analog-input
+
+[Element Capture]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Mic]
+switch = off
+volume = off
+
+[Element Line]
+switch = off
+volume = off
+
+[Element Aux]
+switch = off
+volume = off
+
+[Element Video]
+switch = off
+volume = off
+
+[Element Mic/Line]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element TV Tuner]
+switch = off
+volume = off
+
+[Element FM]
+switch = off
+volume = off
+
+.include analog-input.conf.common
+.include analog-input-mic.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'Mic' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 100
+name = analog-input-microphone
+
+[Element Capture]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Mic]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Line]
+switch = off
+volume = off
+
+[Element Aux]
+switch = off
+volume = off
+
+[Element Video]
+switch = off
+volume = off
+
+[Element Mic/Line]
+switch = off
+volume = off
+
+[Element TV Tuner]
+switch = off
+volume = off
+
+[Element FM]
+switch = off
+volume = off
+
+.include analog-input.conf.common
+.include analog-input-mic.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Common element for all microphone inputs
+;
+; See analog-output.conf.common for an explanation on the directives
+
+;;; 'Mic Select'
+
+[Element Mic Select]
+enumeration = select
+
+[Option Mic Select:Mic1]
+name = input-microphone
+priority = 20
+
+[Option Mic Select:Mic2]
+name = input-microphone
+priority = 19
+
+;;; Various Boosts
+
+[Element Mic Boost (+20dB)]
+switch = select
+volume = merge
+
+[Option Mic Boost (+20dB):on]
+name = input-boost-on
+
+[Option Mic Boost (+20dB):off]
+name = input-boost-off
+
+[Element Mic Boost]
+switch = select
+volume = merge
+
+[Option Mic Boost:on]
+name = input-boost-on
+
+[Option Mic Boost:off]
+name = input-boost-off
+
+[Element Front Mic Boost]
+switch = select
+
+[Option Front Mic Boost:on]
+name = input-boost-on
+
+[Option Front Mic Boost:off]
+name = input-boost-off
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'TV Tuner' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 70
+name = analog-input-video
+
+[Element Capture]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Mic]
+switch = off
+volume = off
+
+[Element Line]
+switch = off
+volume = off
+
+[Element Aux]
+switch = off
+volume = off
+
+[Element Video]
+switch = off
+volume = off
+
+[Element Mic/Line]
+switch = off
+volume = off
+
+[Element TV Tuner]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element FM]
+switch = off
+volume = off
+
+.include analog-input.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; For devices where a 'Video' element exists
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 70
+
+[Element Capture]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Mic]
+switch = off
+volume = off
+
+[Element Line]
+switch = off
+volume = off
+
+[Element Aux]
+switch = off
+volume = off
+
+[Element Video]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Mic/Line]
+switch = off
+volume = off
+
+[Element TV Tuner]
+switch = off
+volume = off
+
+[Element FM]
+switch = off
+volume = off
+
+.include analog-input.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; A fallback for devices that lack seperate Mic/Line/Aux/Video/TV
+; Tuner/FM elements
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 100
+
+[Element Capture]
+required = volume
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Mic]
+required-absent = any
+
+[Element Line]
+required-absent = any
+
+[Element Aux]
+required-absent = any
+
+[Element Video]
+required-absent = any
+
+[Element Mic/Line]
+required-absent = any
+
+[Element TV Tuner]
+required-absent = any
+
+[Element FM]
+required-absent = any
+
+.include analog-input.conf.common
+.include analog-input-mic.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Mixer path for PulseAudio's ALSA backend, common elements for all
+; input paths. If multiple options by the same id are discovered they
+; will be suffixed with a number to distuingish them, in the same
+; order they appear here.
+;
+; Source selection should use the following names:
+;
+; input -- If we don't know the exact kind of input
+; input-microphone
+; input-microphone-internal
+; input-microphone-external
+; input-linein
+; input-video
+; input-radio
+; input-docking-microphone
+; input-docking-linein
+; input-docking
+;
+; We explicitly don't want to wrap the following sources:
+;
+; CD
+; Synth/MIDI
+; Phone
+; Mix
+; Digital/SPDIF
+; Master
+; PC Speaker
+;
+; See analog-output.conf.common for an explanation on the directives
+
+;;; 'Input Source Select'
+
+[Element Input Source Select]
+enumeration = select
+
+[Option Input Source Select:Input1]
+name = input
+priority = 10
+
+[Option Input Source Select:Input2]
+name = input
+priority = 5
+
+;;; 'Input Source'
+
+[Element Input Source]
+enumeration = select
+
+[Option Input Source:Mic]
+name = input-microphone
+priority = 20
+
+[Option Input Source:Microphone]
+name = input-microphone
+priority = 20
+
+[Option Input Source:Front Mic]
+name = input-microphone
+priority = 19
+
+[Option Input Source:Front Microphone]
+name = input-microphone
+priority = 19
+
+[Option Input Source:Internal Mic]
+name = input-microphone
+priority = 19
+
+[Option Input Source:Line]
+name = input-linein
+priority = 18
+
+[Option Input Source:Line-In]
+name = input-linein
+priority = 18
+
+[Option Input Source:Line In]
+name = input-linein
+priority = 18
+
+[Option Input Source:Docking-Station]
+name = input-docking
+priority = 17
+
+[Option Input Source:AUX IN]
+name = input
+priority = 10
+
+;;; 'Capture Source'
+
+[Element Capture Source]
+enumeration = select
+
+[Option Capture Source:TV Tuner]
+name = input-video
+
+[Option Capture Source:FM]
+name = input-radio
+
+[Option Capture Source:Mic/Line]
+name = input
+
+[Option Capture Source:Line/Mic]
+name = input
+
+[Option Capture Source:Mic]
+name = input-microphone
+
+[Option Capture Source:Microphone]
+name = input-microphone
+
+[Option Capture Source:Int Mic]
+name = input-microphone-internal
+
+[Option Capture Source:Int DMic]
+name = input-microphone-internal
+
+[Option Capture Source:Internal Mic]
+name = input-microphone-internal
+
+[Option Capture Source:iMic]
+name = input-microphone-internal
+
+[Option Capture Source:i-Mic]
+name = input-microphone-internal
+
+[Option Capture Source:Internal Microphone]
+name = input-microphone-internal
+
+[Option Capture Source:Front Mic]
+name = input-microphone
+
+[Option Capture Source:Front Microphone]
+name = input-microphone
+
+[Option Capture Source:Rear Mic]
+name = input-microphone
+
+[Option Capture Source:Mic1]
+name = input-microphone
+
+[Option Capture Source:Mic2]
+name = input-microphone
+
+[Option Capture Source:D-Mic]
+name = input-microphone
+
+[Option Capture Source:IntMic]
+name = input-microphone-internal
+
+[Option Capture Source:ExtMic]
+name = input-microphone-external
+
+[Option Capture Source:Ext Mic]
+name = input-microphone-external
+
+[Option Capture Source:E-Mic]
+name = input-microphone-external
+
+[Option Capture Source:e-Mic]
+name = input-microphone-external
+
+[Option Capture Source:LineIn]
+name = input-linein
+
+[Option Capture Source:Analog]
+name = input
+
+[Option Capture Source:Line]
+name = input-linein
+
+[Option Capture Source:Line-In]
+name = input-linein
+
+[Option Capture Source:Line In]
+name = input-linein
+
+[Option Capture Source:Video]
+name = input-video
+
+[Option Capture Source:Aux]
+name = input
+
+[Option Capture Source:Aux0]
+name = input
+
+[Option Capture Source:Aux1]
+name = input
+
+[Option Capture Source:Aux2]
+name = input
+
+[Option Capture Source:Aux3]
+name = input
+
+[Option Capture Source:AUX IN]
+name = input
+
+[Option Capture Source:Aux In]
+name = input
+
+[Option Capture Source:AOUT]
+name = input
+
+[Option Capture Source:AUX]
+name = input
+
+[Option Capture Source:Cam Mic]
+name = input-microphone
+
+[Option Capture Source:Digital Mic]
+name = input-microphone
+
+[Option Capture Source:Digital Mic 1]
+name = input-microphone
+
+[Option Capture Source:Digital Mic 2]
+name = input-microphone
+
+[Option Capture Source:Analog Inputs]
+name = input
+
+[Option Capture Source:Unknown1]
+name = input
+
+[Option Capture Source:Unknown2]
+name = input
+
+[Option Capture Source:Docking-Station]
+name = input-docking
+
+[Option Capture Source:Dock Mic]
+name = input-docking-microphone
+
+;;; 'Mic Jack Mode'
+
+[Element Mic Jack Mode]
+enumeration = select
+
+[Option Mic Jack Mode:Mic In]
+name = input-microphone
+
+[Option Mic Jack Mode:Line In]
+name = input-linein
+
+;;; 'Digital Input Source'
+
+[Element Digital Input Source]
+enumeration = select
+
+[Option Digital Input Source:Analog Inputs]
+name = input
+
+[Option Digital Input Source:Digital Mic 1]
+name = input-microphone
+
+[Option Digital Input Source:Digital Mic 2]
+name = input-microphone
+
+;;; Various Boosts
+
+[Element Capture Boost]
+switch = select
+
+[Option Capture Boost:on]
+name = input-boost-on
+
+[Option Capture Boost:off]
+name = input-boost-off
+
+[Element Auto Gain Control]
+switch = select
+
+[Option Auto Gain Control:on]
+name = input-agc-on
+
+[Option Auto Gain Control:off]
+name = input-agc-off
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Path for mixers that have a 'Headphone2' control
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 89
+
+[Element Hardware Master]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master Mono]
+switch = off
+volume = off
+
+; This profile path is intended to control the second headphones, not
+; the first headphones. But it should not hurt if we leave the
+; headphone jack enabled nonetheless.
+[Element Headphone]
+switch = mute
+volume = zero
+
+[Element Headphone2]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Speaker]
+switch = off
+volume = off
+
+[Element Front]
+switch = off
+volume = off
+
+[Element Rear]
+switch = off
+volume = off
+
+[Element Surround]
+switch = off
+volume = off
+
+[Element Side]
+switch = off
+volume = off
+
+[Element Center]
+switch = off
+volume = off
+
+[Element LFE]
+switch = off
+volume = off
+
+.include analog-output.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Path for mixers that have a 'Headphone' control
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 90
+
+[Element Hardware Master]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master Mono]
+switch = off
+volume = off
+
+[Element Headphone]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+; This profile path is intended to control the first headphones, not
+; the second headphones. But it should not hurt if we leave the second
+; headphone jack enabled nonetheless.
+[Element Headphone2]
+switch = mute
+volume = zero
+
+[Element Speaker]
+switch = off
+volume = off
+
+[Element Front]
+switch = off
+volume = off
+
+[Element Rear]
+switch = off
+volume = off
+
+[Element Surround]
+switch = off
+volume = off
+
+[Element Side]
+switch = off
+volume = off
+
+[Element Center]
+switch = off
+volume = off
+
+[Element LFE]
+switch = off
+volume = off
+
+.include analog-output.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Intended for usage in laptops that have a seperate LFE speaker
+; connected to the Master mono connector
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 40
+
+[Element Hardware Master]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master]
+switch = mute
+volume = merge
+override-map.1 = all-no-lfe
+override-map.2 = all-left,all-right
+
+[Element Master Mono]
+required = any
+switch = mute
+volume = merge
+override-map.1 = lfe
+override-map.2 = lfe,lfe
+
+; This profile path is intended to control the speaker, not the
+; headphones. But it should not hurt if we leave the headphone jack
+; enabled nonetheless.
+[Element Headphone]
+switch = mute
+volume = zero
+
+[Element Headphone2]
+switch = mute
+volume = zero
+
+[Element Speaker]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Front]
+switch = off
+volume = off
+
+[Element Rear]
+switch = off
+volume = off
+
+[Element Surround]
+switch = off
+volume = off
+
+[Element Side]
+switch = off
+volume = off
+
+[Element Center]
+switch = off
+volume = off
+
+[Element LFE]
+switch = off
+volume = off
+
+.include analog-output.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Intended for usage on boards that have a seperate Mono output plug.
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 50
+
+[Element Hardware Master]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master]
+switch = off
+volume = off
+
+[Element Master Mono]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+; This profile path is intended to control the speaker, not the
+; headphones. But it should not hurt if we leave the headphone jack
+; enabled nonetheless.
+[Element Headphone]
+switch = mute
+volume = zero
+
+[Element Headphone2]
+switch = mute
+volume = zero
+
+[Element Speaker]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Front]
+switch = off
+volume = off
+
+[Element Rear]
+switch = off
+volume = off
+
+[Element Surround]
+switch = off
+volume = off
+
+[Element Side]
+switch = off
+volume = off
+
+[Element Center]
+switch = off
+volume = off
+
+[Element LFE]
+switch = off
+volume = off
+
+.include analog-output.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Path for mixers that have a 'Speaker' control
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 100
+
+[Element Hardware Master]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master]
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master Mono]
+switch = off
+volume = off
+
+; This profile path is intended to control the speaker, not the
+; headphones. But it should not hurt if we leave the headphone jack
+; enabled nonetheless.
+[Element Headphone]
+switch = mute
+volume = zero
+
+[Element Headphone2]
+switch = mute
+volume = zero
+
+[Element Speaker]
+required = any
+switch = mute
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Front]
+switch = mute
+volume = merge
+override-map.1 = all-front
+override-map.2 = front-left,front-right
+
+[Element Rear]
+switch = mute
+volume = merge
+override-map.1 = all-rear
+override-map.2 = rear-left,rear-right
+
+[Element Surround]
+switch = mute
+volume = merge
+override-map.1 = all-rear
+override-map.2 = rear-left,rear-right
+
+[Element Side]
+switch = mute
+volume = merge
+override-map.1 = all-side
+override-map.2 = side-left,side-right
+
+[Element Center]
+switch = mute
+volume = merge
+override-map.1 = all-center
+override-map.2 = all-center,all-center
+
+[Element LFE]
+switch = mute
+volume = merge
+override-map.1 = lfe
+override-map.2 = lfe,lfe
+
+.include analog-output.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Intended for the 'default' output. Note that a-o-speaker.conf has a
+; higher priority than this
+;
+; See analog-output.conf.common for an explanation on the directives
+
+[General]
+priority = 99
+
+[Element Hardware Master]
+switch = ignore
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master]
+switch = ignore
+volume = ignore
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element Master Mono]
+switch = off
+volume = off
+
+; This profile path is intended to control the default output, not the
+; headphones. But it should not hurt if we leave the headphone jack
+; enabled nonetheless.
+[Element Headphone]
+switch = ignore
+volume = zero
+
+[Element Headphone2]
+switch = ignore
+volume = zero
+
+[Element Speaker]
+switch = ignore
+volume = off
+
+[Element Front]
+switch = ignore
+volume = merge
+override-map.1 = all-front
+override-map.2 = front-left,front-right
+
+[Element Rear]
+switch = ignore
+volume = merge
+override-map.1 = all-rear
+override-map.2 = rear-left,rear-right
+
+[Element Surround]
+switch = ignore
+volume = merge
+override-map.1 = all-rear
+override-map.2 = rear-left,rear-right
+
+[Element Side]
+switch = ignore
+volume = merge
+override-map.1 = all-side
+override-map.2 = side-left,side-right
+
+[Element Center]
+switch = ignore
+volume = merge
+override-map.1 = all-center
+override-map.2 = all-center,all-center
+
+[Element LFE]
+switch = ignore
+volume = merge
+override-map.1 = lfe
+override-map.2 = lfe,lfe
+
+.include analog-output.conf.common
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Common part of all paths
+
+; So here's generally how mixer paths are used by PA: PA goes through
+; a mixer path file from top to bottom and checks if a mixer element
+; described therein exists. If so it is added to the list of mixer
+; elements PA will control, keeping the order it read them in. If a
+; mixer element described here has set the required= or
+; required-absent= directives a path might not be accepted as valid
+; and is ignored in its entirety (see below). However usually if a
+; element listed here is missing this one element is ignored but not
+; the entire path.
+;
+; When a device shall be muted/unmuted *all* elements listed in a path
+; file with "switch = mute" will be toggled.
+;
+; When a device shall change its volume, PA will got through the list
+; of all elements with "volume = merge" and set the volume on the
+; first element. If that element does not support dB volumes, this is
+; where the story ends. If it does support dB volumes, PA divides the
+; requested volume by the volume that was set on this element, and
+; then go on to the next element with "volume = merge" and then set
+; that there, and so on. That way the first volume element in the
+; path will be the one that does the 'biggest' part of the overall
+; volume adjustment, with the remaining elements usually being set to
+; some value next to 0dB. This logic makes sure we get the full range
+; over all volume sliders and a very high granularity of volumes
+; already in hardware.
+;
+; All switches and enumerations set to "select" are exposed via the
+; "port" functionality of sinks/sources. Basically every possible
+; switch setting and every possible enumeration setting will be
+; combined and made into a "port". So make sure you don't list too
+; many switches/enums for exposing, because the number of ports might
+; rise exponentially.
+;
+; Only one path can be selected at a time. All paths that are valid
+; for an audio device will be exposed as "port" for the sink/source.
+
+
+; [General]
+; priority = ... # Priority for this path
+; description = ...
+;
+; [Option ...:...] # For each option of an enumeration or switch element
+; # that shall be exposed as a sink/source port. Needs to
+; # be named after the Element, followed by a colon, followed
+; # by the option name, resp. on/off if the element is a switch.
+; name = ... # Logical name to use in the path identifier
+; priority = ... # Priority if this is made into a device port
+;
+; [Element ...] # For each element that we shall control
+; required = ignore | switch | volume | enumeration | any # If set, require this element to be of this kind and available,
+; # otherwise don't consider this path valid for the card
+; required-absent = ignore | switch | volume # If set, require this element to not be of this kind and not
+; # available, otherwise don't consider this path valid for the card
+;
+; switch = ignore | mute | off | on | select # What to do with this switch: ignore it, make it follow mute status,
+; # always set it to off, always to on, or make it selectable as port.
+; # If set to 'select' you need to define an Option section for on
+; # and off
+; volume = ignore | merge | off | zero # What to do with this volume: ignore it, merge it into the device
+; # volume slider, always set it to the lowest value possible, or always
+; # set it to 0 dB (for whatever that means)
+; enumeration = ignore | select # What to do with this enumeration, ignore it or make it selectable
+; # via device ports. If set to 'select' you need to define an Option section
+; # for each of the items you want to expose
+; direction = playback | capture # Is this relevant only for playback or capture? If not set this will implicitly be
+; # set the direction of the PCM device is opened as. Generally this doesn't need to be set
+; # unless you have a broken driver that has playback controls marked for capture or vice
+; # versa
+; direction-try-other = no | yes # If the element does not supported what is requested, try the other direction, too?
+;
+; override-map.1 = ... # Override the channel mask of the mixer control if the control only exposes a single channel
+; override-map.2 = ... # Override the channel masks of the mixer control if the control only exposes two channels
+; # Override maps should list for each element channel which high-level channels it controls via a
+; # channel mask. A channel mask may either be the name of a single channel, or the words "all-left",
+; # "all-right", "all-center", "all-front", "all-rear", and "all" to encode a specific subset of
+; # channels in a mask
+
+[Element PCM]
+switch = ignore
+volume = merge
+override-map.1 = all
+override-map.2 = all-left,all-right
+
+[Element External Amplifier]
+switch = select
+
+[Option External Amplifier:on]
+name = output-amplifier-on
+priority = 10
+
+[Option External Amplifier:off]
+name = output-amplifier-off
+priority = 0
+
+;;; 'Analog Output'
+
+[Element Analog Output]
+enumeration = select
+
+[Option Analog Output:Speakers]
+name = output-speaker
+priority = 10
+
+[Option Analog Output:Headphones]
+name = output-headphones
+priority = 9
+
+[Option Analog Output:FP Headphones]
+name = output-headphones
+priority = 8
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Default profile definitions for the ALSA backend of PulseAudio. This
+; is used as fallback for all cards that have no special mapping
+; assigned. (and should be good enough for the vast majority of
+; cards). Use the udev property PULSE_PROFILE_SET to assign a
+; different profile set than this one to a device. So what is this
+; about? Simply, what we do here is map ALSA devices to how they are
+; exposed in PA. We say which ALSA device string to use to open a
+; device, which channel mapping to use then, and which mixer path to
+; use. This is encoded in a 'mapping'. Multiple of these mappings can
+; be bound together in a 'profile' which is then directly exposed in
+; the UI as a card profile. Each mapping assigned to a profile will
+; result in one sink/source to be created if the profile is selected
+; for the card.
+
+; [General]
+; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate
+; # them by combining every input mapping with every output mapping.
+;
+; [Mapping id]
+; device-strings = ... # ALSA device string. %f will be replaced by the card identifier.
+; channel-map = ... # Channel mapping to use for this device
+; description = ...
+; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed.
+; # If multiple are found to be working they will be available as device ports
+; paths-output = ...
+; element-input = ... # Instead of configuring a full mixer path simply configure a single
+; # mixer element for volume/mute handling
+; element-output = ...
+; priority = ...
+; direction = any | input | output # Only useful for?
+;
+; [Profile id]
+; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be
+; # defined in this file too
+; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be
+; # defined in this file too
+; description = ...
+; priority = ... # Numeric value to deduce priority for this profile
+; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile
+; # will be assumed as working without probing. Makes initialization
+; # a bit faster but only works if the card is really known well.
+
+[General]
+auto-profiles = yes
+
+[Mapping analog-mono]
+device-strings = hw:0
+channel-map = mono
+paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
+paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
+priority = 1
+
+[Mapping analog-stereo]
+device-strings = front:%f hw:0
+channel-map = left,right
+paths-output = analog-output analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
+paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line
+priority = 10
+
+[Mapping analog-surround-40]
+device-strings = surround40:%f
+channel-map = front-left,front-right,rear-left,rear-right
+paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
+priority = 7
+direction = output
+
+[Mapping analog-surround-41]
+device-strings = surround41:%f
+channel-map = front-left,front-right,rear-left,rear-right,lfe
+paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
+priority = 8
+direction = output
+
+[Mapping analog-surround-50]
+device-strings = surround50:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center
+paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
+priority = 7
+direction = output
+
+[Mapping analog-surround-51]
+device-strings = surround51:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
+priority = 8
+direction = output
+
+[Mapping analog-surround-71]
+device-strings = surround71:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+description = Analog Surround 7.1
+paths-output = analog-output analog-output-speaker analog-output-lfe-on-mono
+priority = 7
+direction = output
+
+[Mapping iec958-stereo]
+device-strings = iec958:%f
+channel-map = left,right
+priority = 5
+
+[Mapping iec958-surround-40]
+device-strings = iec958:%f
+channel-map = front-left,front-right,rear-left,rear-right
+priority = 1
+
+[Mapping iec958-ac3-surround-40]
+device-strings = a52:%f
+channel-map = front-left,front-right,rear-left,rear-right
+priority = 2
+direction = output
+
+[Mapping iec958-ac3-surround-51]
+device-strings = a52:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 3
+direction = output
+
+[Mapping hdmi-stereo]
+device-strings = hdmi:%f
+channel-map = left,right
+priority = 4
+direction = output
+
+; An example for defining multiple-sink profiles
+#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
+#description = Foobar
+#output-mappings = analog-stereo iec958-stereo
+#input-mappings = analog-stereo
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Native Instruments Audio 4 DJ
+;
+; This card has two stereo pairs of input and two stereo pairs of
+; output, named channels A and B. Channel B has an additional
+; Headphone connector.
+;
+; We knowingly only define a subset of the theoretically possible
+; mapping combinations as profiles here.
+;
+; See default.conf for an explanation on the directives used here.
+
+[General]
+auto-profiles = no
+
+[Mapping analog-stereo-a]
+description = Analog Stereo Channel A
+device-strings = hw:%f,0,0
+channel-map = left,right
+
+[Mapping analog-stereo-b-output]
+description = Analog Stereo Channel B (Headphones)
+device-strings = hw:%f,0,1
+channel-map = left,right
+direction = output
+
+[Mapping analog-stereo-b-input]
+description = Analog Stereo Channel B
+device-strings = hw:%f,0,1
+channel-map = left,right
+direction = input
+
+[Profile output:analog-stereo-all+input:analog-stereo-all]
+description = Analog Stereo Duplex Channels A, B (Headphones)
+output-mappings = analog-stereo-a analog-stereo-b-output
+input-mappings = analog-stereo-a analog-stereo-b-input
+priority = 100
+skip-probe = yes
+
+[Profile output:analog-stereo-a+input:analog-stereo-a]
+description = Analog Stereo Duplex Channel A
+output-mappings = analog-stereo-a
+input-mappings = analog-stereo-a
+priority = 40
+skip-probe = yes
+
+[Profile output:analog-stereo-b+input:analog-stereo-b]
+description = Analog Stereo Duplex Channel B (Headphones)
+output-mappings = analog-stereo-b-output
+input-mappings = analog-stereo-b-input
+priority = 50
+skip-probe = yes
+
+[Profile output:analog-stereo-a]
+description = Analog Stereo Output Channel A
+output-mappings = analog-stereo-a
+priority = 5
+skip-probe = yes
+
+[Profile output:analog-stereo-b]
+description = Analog Stereo Output Channel B (Headphones)
+output-mappings = analog-stereo-b-output
+priority = 6
+skip-probe = yes
+
+[Profile input:analog-stereo-a]
+description = Analog Stereo Input Channel A
+input-mappings = analog-stereo-a
+priority = 2
+skip-probe = yes
+
+[Profile input:analog-stereo-b]
+description = Analog Stereo Input Channel B
+input-mappings = analog-stereo-b-input
+priority = 1
+skip-probe = yes
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Native Instruments Audio 8 DJ
+;
+; This card has four stereo pairs of input and four stereo pairs of
+; output, named channels A to D. Channel C has an additional Mic/Line
+; connector, channel D an additional Headphone connector.
+;
+; We knowingly only define a subset of the theoretically possible
+; mapping combinations as profiles here.
+;
+; See default.conf for an explanation on the directives used here.
+
+[General]
+auto-profiles = no
+
+[Mapping analog-stereo-a]
+description = Analog Stereo Channel A
+device-strings = hw:%f,0,0
+channel-map = left,right
+
+[Mapping analog-stereo-b]
+description = Analog Stereo Channel B
+device-strings = hw:%f,0,1
+channel-map = left,right
+
+# Since we want to set a different description for channel C's/D's input
+# and output we define two seperate mappings for them
+[Mapping analog-stereo-c-output]
+description = Analog Stereo Channel C
+device-strings = hw:%f,0,2
+channel-map = left,right
+direction = output
+
+[Mapping analog-stereo-c-input]
+description = Analog Stereo Channel C (Line/Mic)
+device-strings = hw:%f,0,2
+channel-map = left,right
+direction = input
+
+[Mapping analog-stereo-d-output]
+description = Analog Stereo Channel D (Headphones)
+device-strings = hw:%f,0,3
+channel-map = left,right
+direction = output
+
+[Mapping analog-stereo-d-input]
+description = Analog Stereo Channel D
+device-strings = hw:%f,0,3
+channel-map = left,right
+direction = input
+
+[Profile output:analog-stereo-all+input:analog-stereo-all]
+description = Analog Stereo Duplex Channels A, B, C (Line/Mic), D (Headphones)
+output-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-output analog-stereo-d-output
+input-mappings = analog-stereo-a analog-stereo-b analog-stereo-c-input analog-stereo-d-input
+priority = 100
+skip-probe = yes
+
+[Profile output:analog-stereo-d+input:analog-stereo-c]
+description = Analog Stereo Channel D (Headphones) Output, Channel C (Line/Mic) Input
+output-mappings = analog-stereo-d-output
+input-mappings = analog-stereo-c-input
+priority = 90
+skip-probe = yes
+
+[Profile output:analog-stereo-c-d+input:analog-stereo-c-d]
+description = Analog Stereo Duplex Channels C (Line/Mic), D (Line/Mic)
+output-mappings = analog-stereo-c-output analog-stereo-d-output
+input-mappings = analog-stereo-c-input analog-stereo-d-input
+priority = 80
+skip-probe = yes
+
+[Profile output:analog-stereo-a+input:analog-stereo-a]
+description = Analog Stereo Duplex Channel A
+output-mappings = analog-stereo-a
+input-mappings = analog-stereo-a
+priority = 50
+skip-probe = yes
+
+[Profile output:analog-stereo-b+input:analog-stereo-b]
+description = Analog Stereo Duplex Channel B
+output-mappings = analog-stereo-b
+input-mappings = analog-stereo-b
+priority = 40
+skip-probe = yes
+
+[Profile output:analog-stereo-c+input:analog-stereo-c]
+description = Analog Stereo Duplex Channel C (Line/Mic)
+output-mappings = analog-stereo-c-output
+input-mappings = analog-stereo-c-input
+priority = 60
+skip-probe = yes
+
+[Profile output:analog-stereo-d+input:analog-stereo-d]
+description = Analog Stereo Duplex Channel D (Headphones)
+output-mappings = analog-stereo-d-output
+input-mappings = analog-stereo-d-input
+priority = 70
+skip-probe = yes
+
+[Profile output:analog-stereo-a]
+description = Analog Stereo Output Channel A
+output-mappings = analog-stereo-a
+priority = 6
+skip-probe = yes
+
+[Profile output:analog-stereo-b]
+description = Analog Stereo Output Channel B
+output-mappings = analog-stereo-b
+priority = 5
+skip-probe = yes
+
+[Profile output:analog-stereo-c]
+description = Analog Stereo Output Channel C
+output-mappings = analog-stereo-c-output
+priority = 7
+skip-probe = yes
+
+[Profile output:analog-stereo-d]
+description = Analog Stereo Output Channel D (Headphones)
+output-mappings = analog-stereo-d-output
+priority = 8
+skip-probe = yes
+
+[Profile input:analog-stereo-a]
+description = Analog Stereo Input Channel A
+input-mappings = analog-stereo-a
+priority = 2
+skip-probe = yes
+
+[Profile input:analog-stereo-b]
+description = Analog Stereo Input Channel B
+input-mappings = analog-stereo-b
+priority = 1
+skip-probe = yes
+
+[Profile input:analog-stereo-c]
+description = Analog Stereo Input Channel C (Line/Mic)
+input-mappings = analog-stereo-c-input
+priority = 4
+skip-probe = yes
+
+[Profile input:analog-stereo-d]
+description = Analog Stereo Input Channel D
+input-mappings = analog-stereo-d-input
+priority = 3
+skip-probe = yes
--- /dev/null
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+; Default profile definitions for the ALSA backend of PulseAudio. This
+; is used as fallback for all cards that have no special mapping
+; assigned (and should be good enough for the vast majority of
+; cards). If you want to assign a different profile set than this one
+; to a device, either set the udev property PULSE_PROFILE_SET for the
+; card, or use the "profile_set" module argument when loading
+; module-alsa-card.
+;
+; So what is this about? Simply, what we do here is map ALSA devices
+; to how they are exposed in PA. We say which ALSA device string to
+; use to open a device, which channel mapping to use then, and which
+; mixer path to use. This is encoded in a 'mapping'. Multiple of these
+; mappings can be bound together in a 'profile' which is then directly
+; exposed in the UI as a card profile. Each mapping assigned to a
+; profile will result in one sink/source to be created if the profile
+; is selected for the card.
+;
+; Additionally, the path set configuration files can describe the
+; decibel values assigned to the steps of the volume elements. This
+; can be used to work around situations when the alsa driver doesn't
+; provide any decibel information, or when the information is
+; incorrect.
+
+
+; [General]
+; auto-profiles = no | yes # Instead of defining all profiles manually, autogenerate
+; # them by combining every input mapping with every output mapping.
+;
+; [Mapping id]
+; device-strings = ... # ALSA device string. %f will be replaced by the card identifier.
+; channel-map = ... # Channel mapping to use for this device
+; description = ...
+; paths-input = ... # A list of mixer paths to use. Every path in this list will be probed.
+; # If multiple are found to be working they will be available as device ports
+; paths-output = ...
+; element-input = ... # Instead of configuring a full mixer path simply configure a single
+; # mixer element for volume/mute handling
+; element-output = ...
+; priority = ...
+; direction = any | input | output # Only useful for?
+;
+; [Profile id]
+; input-mappings = ... # Lists mappings for sources on this profile, those mapping must be
+; # defined in this file too
+; output-mappings = ... # Lists mappings for sinks on this profile, those mappings must be
+; # defined in this file too
+; description = ...
+; priority = ... # Numeric value to deduce priority for this profile
+; skip-probe = no | yes # Skip probing for availability? If this is yes then this profile
+; # will be assumed as working without probing. Makes initialization
+; # a bit faster but only works if the card is really known well.
+;
+; [DecibelFix element] # Decibel fixes can be used to work around missing or incorrect dB
+; # information from alsa. A decibel fix is a table that maps volume steps
+; # to decibel values for one volume element. The "element" part in the
+; # section title is the name of the volume element.
+; #
+; # NOTE: This feature is meant just as a help for figuring out the correct
+; # decibel values. PulseAudio is not the correct place to maintain the
+; # decibel mappings!
+; #
+; # If you need this feature, then you should make sure that when you have
+; # the correct values figured out, the alsa driver developers get informed
+; # too, so that they can fix the driver.
+;
+; db-values = ... # The option value consists of pairs of step numbers and decibel values.
+; # The pairs are separated with whitespace, and steps are separated from
+; # the corresponding decibel values with a colon. The values must be in an
+; # increasing order. Here's an example of a valid string:
+; #
+; # "0:-40.50 1:-38.70 3:-33.00 11:0"
+; #
+; # The lowest step imposes a lower limit for hardware volume and the
+; # highest step correspondingly imposes a higher limit. That means that
+; # that the mixer will never be set outside those values - the rest of the
+; # volume scale is done using software volume.
+; #
+; # As can be seen in the example, you don't need to specify a dB value for
+; # each step. The dB values for skipped steps will be linearly interpolated
+; # using the nearest steps that are given.
+
+[General]
+auto-profiles = yes
+
+[Mapping usb-analog-stereo]
+device-strings = hw:%f
+channel-map = left,right
+paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono analog-output-lfe-on-mono
+priority = 10
+direction = output
+
+[Mapping usb-analog-surround-51]
+device-strings = hw:%f
+;channel-map = front-left,front-right,front-center,lfe,rear-left,rear-right
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+paths-output = analog-output analog-output-speaker analog-output-desktop-speaker analog-output-lfe-on-mono
+priority = 180
+direction = output
+
+; An example for defining multiple-sink profiles
+#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
+#description = Foobar
+#output-mappings = analog-stereo iec958-stereo
+#input-mappings = analog-stereo
+++ /dev/null
-Name: mmfw-sysconf-cleansdk-e4x12
-Summary: Multimedia Framework system configuration package
-Version: 0.1.66
-Release: 0
-Group: TO_BE/FILLED_IN
-License: Apache-2.0
-Source0: mmfw-sysconf-%{version}.tar.gz
-ExclusiveArch: %arm
-
-%description
-Multimedia Framework system configuration package
-
-%prep
-%setup -q -n mmfw-sysconf-%{version}
-
-%build
-
-%install
-rm -rf %{buildroot}
-mkdir -p %{buildroot}/etc
-mkdir -p %{buildroot}/usr
-cp -arf mmfw-sysconf-cleansdk-e4x12/* %{buildroot}
-
-%post
-
-%postun
-
-%files
-%manifest mmfw-sysconf-cleansdk-e4x12.manifest
-%defattr(-,root,root,-)
-/etc/asound.conf
-/etc/pulse/*
-/usr/etc/*.ini
-/usr/etc/gst-openmax.conf
-/usr/share/pulseaudio/alsa-mixer/paths/*.conf
-/usr/share/pulseaudio/alsa-mixer/paths/*.common
-/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf
+++ /dev/null
-Name: mmfw-sysconf-cleansdk-target
-Summary: Multimedia Framework system configuration package
-Version: 0.1.66
-Release: 0
-Group: TO_BE/FILLED_IN
-License: Apache-2.0
-Source0: mmfw-sysconf-%{version}.tar.gz
-ExclusiveArch: %arm
-
-%description
-Multimedia Framework system configuration package
-
-%prep
-%setup -q -n mmfw-sysconf-%{version}
-
-%build
-
-%install
-rm -rf %{buildroot}
-mkdir -p %{buildroot}/etc
-mkdir -p %{buildroot}/usr
-cp -arf mmfw-sysconf-cleansdk-target/* %{buildroot}
-
-%post
-
-%postun
-
-%files
-%manifest mmfw-sysconf-cleansdk-target.manifest
-%defattr(-,root,root,-)
-/etc/asound.conf
-/etc/pulse/*
-/usr/etc/*.ini
-/usr/etc/gst-openmax.conf
-/usr/share/pulseaudio/alsa-mixer/paths/*.conf
-/usr/share/pulseaudio/alsa-mixer/paths/*.common
-/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf
+++ /dev/null
-Name: mmfw-sysconf-simulator
-Summary: Multimedia Framework system configuration package
-Version: 0.1.66
-Release: 0
-Group: TO_BE/FILLED_IN
-License: Apache-2.0
-Source0: mmfw-sysconf-%{version}.tar.gz
-ExclusiveArch: %{ix86}
-
-%description
-Multimedia Framework system configuration package for simulator
-
-%prep
-%setup -q -n mmfw-sysconf-%{version}
-
-%build
-
-%install
-rm -rf %{buildroot}
-mkdir -p %{buildroot}/etc
-mkdir -p %{buildroot}/usr
-cp -arf mmfw-sysconf-simulator/* %{buildroot}
-
-%post
-
-%postun
-
-%files
-%manifest mmfw-sysconf-simulator.manifest
-%defattr(-,root,root,-)
-/etc/asound.conf
-/etc/pulse/*
-/usr/etc/*.ini
-/usr/etc/gst-openmax.conf
-/usr/share/pulseaudio/alsa-mixer/paths/*.conf
-/usr/share/pulseaudio/alsa-mixer/paths/*.common
-/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf
Name: mmfw-sysconf
Summary: Multimedia Framework system configuration package
-Version: 0.1.66
+Version: 0.2.0
Release: 0
-Group: TO_BE/FILLED_IN
+Group: Multimedia/Configuration
License: Apache-2.0
Source0: mmfw-sysconf-%{version}.tar.gz
-ExcludeArch: %{ix86}
-ExcludeArch: %{arm}
%description
-Multimedia Framework system configuration package for simulator
+Multimedia Framework system configuration package including ini, conf and etc files.
+
+
+%ifarch %{arm}
+
+%package target-u3
+Summary: Multimedia Framework system configuration package for u3
+Group: Multimedia/Configuration
+License: Apache-2.0
+
+%description target-u3
+Multimedia Framework system configuration package including ini, conf and etc files for u3 target.
+
+%else
+
+%package simulator
+Summary: Multimedia Framework system configuration package for simulator
+Group: Multimedia/Configuration
+License: Apache-2.0
+
+%description simulator
+Multimedia Framework system configuration package including ini, conf and etc files for simulator.
+
+%endif
+
%prep
-%setup -q -n mmfw-sysconf-%{version}
+%setup -q -n %{name}-%{version}
+
%build
+
%install
+rm -rf %{buildroot}
+mkdir -p %{buildroot}%{_datadir}
+
+
+%ifarch %{arm}
+
+mkdir -p %{buildroot}%{_datadir}/%{name}-target-u3
+cp -arf %{name}-target-u3/* %{buildroot}%{_datadir}/%{name}-target-u3
+mkdir -p %{buildroot}%{_datadir}/%{name}-target-u3/usr/share/license
+cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-target-u3/usr/share/license/%{name}-target-u3
+cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-target-u3/usr/share/license/%{name}-target-u3
+
+%else
-%post
+mkdir -p %{buildroot}%{_datadir}/%{name}-simulator
+cp -arf %{name}-simulator/* %{buildroot}%{_datadir}/%{name}-simulator
+mkdir -p %{buildroot}%{_datadir}/%{name}-simulator/usr/share/license
+cp LICENSE.APLv2.0 %{buildroot}%{_datadir}/%{name}-simulator/usr/share/license/%{name}-simulator
+cat LICENSE.LGPLv2.1 >> %{buildroot}%{_datadir}/%{name}-simulator/usr/share/license/%{name}-simulator
-%postun
+%endif
-%files
+
+%ifarch %{arm}
+
+%post target-u3
+cp -arf %{_datadir}/mmfw-sysconf-target-u3/* /
+rm -rf %{_datadir}/mmfw-sysconf-target-u3
+
+%else
+
+%post simulator
+cp -arf %{_datadir}/mmfw-sysconf-simulator/* /
+rm -rf %{_datadir}/mmfw-sysconf-simulator
+
+%endif
+
+
+%postun
+
+
+%ifarch %{arm}
+
+%files target-u3
+%manifest mmfw-sysconf-target-u3.manifest
%defattr(-,root,root,-)
+%{_datadir}/mmfw-sysconf-target-u3/etc/asound.conf
+%{_datadir}/mmfw-sysconf-target-u3/etc/pulse/*
+%{_datadir}/mmfw-sysconf-target-u3/usr/etc/*.ini
+%{_datadir}/mmfw-sysconf-target-u3/usr/etc/gst-openmax.conf
+%{_datadir}/mmfw-sysconf-target-u3/usr/etc/gst-tz-openmax.conf
+%{_datadir}/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/*.conf
+%{_datadir}/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/paths/*.common
+%{_datadir}/mmfw-sysconf-target-u3/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf
+%{_datadir}/mmfw-sysconf-target-u3/opt/system/*
+%{_datadir}/mmfw-sysconf-target-u3/usr/share/license/mmfw-sysconf-target-u3
+
+%else
+
+%files simulator
+%manifest mmfw-sysconf-simulator.manifest
+%defattr(-,root,root,-)
+%{_datadir}/mmfw-sysconf-simulator/etc/asound.conf
+%{_datadir}/mmfw-sysconf-simulator/etc/pulse/*
+%{_datadir}/mmfw-sysconf-simulator/usr/etc/*.ini
+%{_datadir}/mmfw-sysconf-simulator/usr/etc/gst-openmax.conf
+%{_datadir}/mmfw-sysconf-simulator/usr/share/pulseaudio/alsa-mixer/paths/*.conf
+%{_datadir}/mmfw-sysconf-simulator/usr/share/pulseaudio/alsa-mixer/paths/*.common
+%{_datadir}/mmfw-sysconf-simulator/usr/share/pulseaudio/alsa-mixer/profile-sets/*.conf
+%{_datadir}/mmfw-sysconf-simulator/usr/share/license/mmfw-sysconf-simulator
+
+%endif
+
projects / platform / core / multimedia / mmfw-sysconf.git / commitdiff