at91rm9200: move serial shutdown code to serial drivers

introduce serial_exit for this purpose. Use it only when the rm9200
serial driver is active

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

diff --git a/cpu/arm920t/at91rm9200/interrupts.c b/cpu/arm920t/at91rm9200/interrupts.c
index 5f0703c..15e22bf 100644 (file)
--- a/cpu/arm920t/at91rm9200/interrupts.c
+++ b/cpu/arm920t/at91rm9200/interrupts.c
@@ -166,21 +166,14 @@ ulong get_tbclk (void)
 void reset_cpu (ulong ignored)
 {
 
-#ifdef CONFIG_DBGU
-       AT91PS_USART us = (AT91PS_USART) AT91C_BASE_DBGU;
-#endif
-#ifdef CONFIG_USART0
-       AT91PS_USART us = AT91C_BASE_US0;
-#endif
-#ifdef CONFIG_USART1
-       AT91PS_USART us = AT91C_BASE_US1;
-#endif
 #ifdef CONFIG_AT91RM9200DK
        AT91PS_PIO pio = AT91C_BASE_PIOA;
 #endif
 
+#if defined(CONFIG_AT91RM9200_USART)
        /*shutdown the console to avoid strange chars during reset */
-       us->US_CR = (AT91C_US_RSTRX | AT91C_US_RSTTX);
+       serial_exit();
+#endif
 
 #ifdef CONFIG_AT91RM9200DK
        /* Clear PA19 to trigger the hard reset */

diff --git a/drivers/serial/at91rm9200_usart.c b/drivers/serial/at91rm9200_usart.c
index d563445..858bde9 100644 (file)
--- a/drivers/serial/at91rm9200_usart.c
+++ b/drivers/serial/at91rm9200_usart.c
@@ -86,6 +86,11 @@ int serial_init (void)
        return (0);
 }
 
+void serial_exit (void)
+{
+       us->US_CR = (AT91C_US_RSTRX | AT91C_US_RSTTX);
+}
+
 void serial_putc (const char c)
 {
        if (c == '\n')

diff --git a/include/common.h b/include/common.h
index 20c058a..30fff7d 100644 (file)
--- a/include/common.h
+++ b/include/common.h
@@ -453,6 +453,7 @@ void ft_pci_setup(void *blob, bd_t *bd);
 
 /* $(CPU)/serial.c */
 int    serial_init   (void);
+void   serial_exit   (void);
 void   serial_addr   (unsigned int);
 void   serial_setbrg (void);
 void   serial_putc   (const char);