ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control

[ Upstream commit a1429f3d3029b65cd4032f6218d5290911377ce4 ]

Modify usart 2 & 3 pins to allow wake up from low power mode while the
hardware flow control is activated. UART RTS pin need to stay configure
in idle mode to receive characters in order to wake up.

Fixes: 842ed898a757 ("ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl")

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index d84686e..dee4d32 100644 (file)
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1806,10 +1806,15 @@
        usart2_idle_pins_c: usart2-idle-2 {
                pins1 {
                        pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
-                                <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
                                 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
                };
                pins2 {
+                       pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+                       bias-disable;
+                       drive-push-pull;
+                       slew-rate = <3>;
+               };
+               pins3 {
                        pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
                        bias-disable;
                };
@@ -1855,10 +1860,15 @@
        usart3_idle_pins_b: usart3-idle-1 {
                pins1 {
                        pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-                                <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
                                 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
                };
                pins2 {
+                       pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+                       bias-disable;
+                       drive-push-pull;
+                       slew-rate = <0>;
+               };
+               pins3 {
                        pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
                        bias-disable;
                };
@@ -1891,10 +1901,15 @@
        usart3_idle_pins_c: usart3-idle-2 {
                pins1 {
                        pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
-                                <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
                                 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
                };
                pins2 {
+                       pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+                       bias-disable;
+                       drive-push-pull;
+                       slew-rate = <0>;
+               };
+               pins3 {
                        pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
                        bias-disable;
                };