greybus: arche-apb-ctrl: Add sysfs to allow user to change state

This patch introduces sysfs interface for the user space to enable
state change of the driver. Driver supports below operational
states,

 - off
 - active
 - standby
 - fw_flashing

To see the current state

i # cat /sys/devices/arche_platform.*/apb*/state

And to change the state
 # echo [off/active/standby/fw_flashing] > /sys/devices/arche_platform.*/apb*/state

Testing Done: Tested on EVT1.2 and DB3.5 platform

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

diff --git a/drivers/staging/greybus/arche-apb-ctrl.c b/drivers/staging/greybus/arche-apb-ctrl.c
index 8f6f096..e4fd34d 100644 (file)
--- a/drivers/staging/greybus/arche-apb-ctrl.c
+++ b/drivers/staging/greybus/arche-apb-ctrl.c
@@ -113,6 +113,52 @@ static int apb_ctrl_coldboot_seq(struct platform_device *pdev)
        return 0;
 }
 
+static int apb_ctrl_fw_flashing_seq(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
+       int ret;
+
+       ret = regulator_enable(apb->vcore);
+       if (ret) {
+               dev_err(dev, "failed to enable core regulator\n");
+               return ret;
+       }
+
+       ret = regulator_enable(apb->vio);
+       if (ret) {
+               dev_err(dev, "failed to enable IO regulator\n");
+               return ret;
+       }
+
+       /* for flashing device should be in reset state */
+       assert_reset(apb->resetn_gpio);
+       apb->state = ARCHE_PLATFORM_STATE_FW_FLASHING;
+
+       return 0;
+}
+
+static int apb_ctrl_standby_boot_seq(struct platform_device *pdev)
+{
+       struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
+
+       /* If it is in OFF state, then we do not want to change the state */
+       if (apb->state == ARCHE_PLATFORM_STATE_OFF)
+               return 0;
+
+       /*
+        * As per WDM spec, do nothing
+        *
+        * Pasted from WDM spec,
+        *  - A falling edge on POWEROFF_L is detected (a)
+        *  - WDM enters standby mode, but no output signals are changed
+        * */
+
+       /* TODO: POWEROFF_L is input to WDM module  */
+       apb->state = ARCHE_PLATFORM_STATE_STANDBY;
+       return 0;
+}
+
 static void apb_ctrl_poweroff_seq(struct platform_device *pdev)
 {
        struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
@@ -134,6 +180,66 @@ static void apb_ctrl_poweroff_seq(struct platform_device *pdev)
        /* TODO: May have to send an event to SVC about this exit */
 }
 
+static ssize_t state_store(struct device *dev,
+               struct device_attribute *attr, const char *buf, size_t count)
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
+       int ret = 0;
+
+       if (sysfs_streq(buf, "off")) {
+               if (apb->state == ARCHE_PLATFORM_STATE_OFF)
+                       return count;
+
+               apb_ctrl_poweroff_seq(pdev);
+       } else if (sysfs_streq(buf, "active")) {
+               if (apb->state == ARCHE_PLATFORM_STATE_ACTIVE)
+                       return count;
+
+               apb_ctrl_poweroff_seq(pdev);
+               ret = apb_ctrl_coldboot_seq(pdev);
+       } else if (sysfs_streq(buf, "standby")) {
+               if (apb->state == ARCHE_PLATFORM_STATE_STANDBY)
+                       return count;
+
+               ret = apb_ctrl_standby_boot_seq(pdev);
+       } else if (sysfs_streq(buf, "fw_flashing")) {
+               if (apb->state == ARCHE_PLATFORM_STATE_FW_FLASHING)
+                       return count;
+
+               /* First we want to make sure we power off everything
+                * and then enter FW flashing state */
+               apb_ctrl_poweroff_seq(pdev);
+               ret = apb_ctrl_fw_flashing_seq(pdev);
+       } else {
+               dev_err(dev, "unknown state\n");
+               ret = -EINVAL;
+       }
+
+       return ret ? ret : count;
+}
+
+static ssize_t state_show(struct device *dev,
+               struct device_attribute *attr, char *buf)
+{
+       struct arche_apb_ctrl_drvdata *apb = dev_get_drvdata(dev);
+
+       switch (apb->state) {
+       case ARCHE_PLATFORM_STATE_OFF:
+               return sprintf(buf, "off\n");
+       case ARCHE_PLATFORM_STATE_ACTIVE:
+               return sprintf(buf, "active\n");
+       case ARCHE_PLATFORM_STATE_STANDBY:
+               return sprintf(buf, "standby\n");
+       case ARCHE_PLATFORM_STATE_FW_FLASHING:
+               return sprintf(buf, "fw_flashing\n");
+       default:
+               return sprintf(buf, "unknown state\n");
+       }
+}
+
+static DEVICE_ATTR_RW(state);
+
 static int apb_ctrl_get_devtree_data(struct platform_device *pdev,
                struct arche_apb_ctrl_drvdata *apb)
 {
@@ -243,10 +349,18 @@ int arche_apb_ctrl_probe(struct platform_device *pdev)
 
        platform_set_drvdata(pdev, apb);
 
+       /* Create sysfs interface to allow user to change state dynamically */
+       ret = device_create_file(dev, &dev_attr_state);
+       if (ret) {
+               dev_err(dev, "failed to create state file in sysfs\n");
+               return ret;
+       }
+
        ret = apb_ctrl_coldboot_seq(pdev);
        if (ret) {
                dev_err(dev, "failed to set init state of control signal %d\n",
                                ret);
+               device_remove_file(dev, &dev_attr_state);
                platform_set_drvdata(pdev, NULL);
                return ret;
        }
@@ -261,6 +375,7 @@ int arche_apb_ctrl_remove(struct platform_device *pdev)
 {
        struct arche_apb_ctrl_drvdata *apb = platform_get_drvdata(pdev);
 
+       device_remove_file(&pdev->dev, &dev_attr_state);
        apb_ctrl_poweroff_seq(pdev);
        platform_set_drvdata(pdev, NULL);
        unexport_gpios(apb);