+++ /dev/null
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/bus/intel,ixp4xx-expansion-bus-controller.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel IXP4xx Expansion Bus Controller
-
-description: |
- The IXP4xx expansion bus controller handles access to devices on the
- memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
- including IXP42x, IXP43x, IXP45x and IXP46x.
-
-maintainers:
- - Linus Walleij <linus.walleij@linaro.org>
-
-properties:
- $nodename:
- pattern: '^bus@[0-9a-f]+$'
-
- compatible:
- items:
- - enum:
- - intel,ixp42x-expansion-bus-controller
- - intel,ixp43x-expansion-bus-controller
- - intel,ixp45x-expansion-bus-controller
- - intel,ixp46x-expansion-bus-controller
- - const: syscon
-
- reg:
- description: Control registers for the expansion bus, these are not
- inside the memory range handled by the expansion bus.
- maxItems: 1
-
- native-endian:
- $ref: /schemas/types.yaml#/definitions/flag
- description: The IXP4xx has a peculiar MMIO access scheme, as it changes
- the access pattern for words (swizzling) on the bus depending on whether
- the SoC is running in big-endian or little-endian mode. Thus the
- registers must always be accessed using native endianness.
-
- "#address-cells":
- description: |
- The first cell is the chip select number.
- The second cell is the address offset within the bank.
- const: 2
-
- "#size-cells":
- const: 1
-
- ranges: true
- dma-ranges: true
-
-patternProperties:
- "^.*@[0-7],[0-9a-f]+$":
- description: Devices attached to chip selects are represented as
- subnodes.
- type: object
-
- properties:
- intel,ixp4xx-eb-t1:
- description: Address timing, extend address phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 3
-
- intel,ixp4xx-eb-t2:
- description: Setup chip select timing, extend setup phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 3
-
- intel,ixp4xx-eb-t3:
- description: Strobe timing, extend strobe phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 15
-
- intel,ixp4xx-eb-t4:
- description: Hold timing, extend hold phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 3
-
- intel,ixp4xx-eb-t5:
- description: Recovery timing, extend recovery phase with n cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 15
-
- intel,ixp4xx-eb-cycle-type:
- description: The type of cycles to use on the expansion bus for this
- chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2]
-
- intel,ixp4xx-eb-byte-access-on-halfword:
- description: Allow byte read access on half word devices.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-hpi-hrdy-pol-high:
- description: Set HPI HRDY polarity to active high when using HPI.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-mux-address-and-data:
- description: Multiplex address and data on the data bus.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-ahb-split-transfers:
- description: Enable AHB split transfers.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-write-enable:
- description: Enable write cycles.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
- intel,ixp4xx-eb-byte-access:
- description: Expansion bus uses only 8 bits. The default is to use
- 16 bits.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1]
-
-required:
- - compatible
- - reg
- - native-endian
- - "#address-cells"
- - "#size-cells"
- - ranges
- - dma-ranges
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/irq.h>
- bus@50000000 {
- compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
- reg = <0xc4000000 0x28>;
- native-endian;
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0x0 0x50000000 0x01000000>,
- <1 0x0 0x51000000 0x01000000>;
- dma-ranges = <0 0x0 0x50000000 0x01000000>,
- <1 0x0 0x51000000 0x01000000>;
- flash@0,0 {
- compatible = "intel,ixp4xx-flash", "cfi-flash";
- bank-width = <2>;
- reg = <0 0x00000000 0x1000000>;
- intel,ixp4xx-eb-t3 = <3>;
- intel,ixp4xx-eb-cycle-type = <0>;
- intel,ixp4xx-eb-byte-access-on-halfword = <1>;
- intel,ixp4xx-eb-write-enable = <1>;
- intel,ixp4xx-eb-byte-access = <0>;
- };
- serial@1,0 {
- compatible = "exar,xr16l2551", "ns8250";
- reg = <1 0x00000000 0x10>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- clock-frequency = <1843200>;
- intel,ixp4xx-eb-t3 = <3>;
- intel,ixp4xx-eb-cycle-type = <1>;
- intel,ixp4xx-eb-write-enable = <1>;
- intel,ixp4xx-eb-byte-access = <1>;
- };
- };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx Expansion Bus Controller
+
+description: |
+ The IXP4xx expansion bus controller handles access to devices on the
+ memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+ including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ $nodename:
+ pattern: '^bus@[0-9a-f]+$'
+
+ compatible:
+ items:
+ - enum:
+ - intel,ixp42x-expansion-bus-controller
+ - intel,ixp43x-expansion-bus-controller
+ - intel,ixp45x-expansion-bus-controller
+ - intel,ixp46x-expansion-bus-controller
+ - const: syscon
+
+ reg:
+ description: Control registers for the expansion bus, these are not
+ inside the memory range handled by the expansion bus.
+ maxItems: 1
+
+ native-endian:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: The IXP4xx has a peculiar MMIO access scheme, as it changes
+ the access pattern for words (swizzling) on the bus depending on whether
+ the SoC is running in big-endian or little-endian mode. Thus the
+ registers must always be accessed using native endianness.
+
+ "#address-cells":
+ description: |
+ The first cell is the chip select number.
+ The second cell is the address offset within the bank.
+ const: 2
+
+ "#size-cells":
+ const: 1
+
+ ranges: true
+ dma-ranges: true
+
+patternProperties:
+ "^.*@[0-7],[0-9a-f]+$":
+ description: Devices attached to chip selects are represented as
+ subnodes.
+ type: object
+ $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+
+required:
+ - compatible
+ - reg
+ - native-endian
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - dma-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ bus@50000000 {
+ compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+ reg = <0xc4000000 0x28>;
+ native-endian;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x50000000 0x01000000>,
+ <1 0x0 0x51000000 0x01000000>;
+ dma-ranges = <0 0x0 0x50000000 0x01000000>,
+ <1 0x0 0x51000000 0x01000000>;
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ reg = <0 0x00000000 0x1000000>;
+ intel,ixp4xx-eb-t3 = <3>;
+ intel,ixp4xx-eb-cycle-type = <0>;
+ intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <0>;
+ };
+ serial@1,0 {
+ compatible = "exar,xr16l2551", "ns8250";
+ reg = <1 0x00000000 0x10>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ clock-frequency = <1843200>;
+ intel,ixp4xx-eb-t3 = <3>;
+ intel,ixp4xx-eb-cycle-type = <1>;
+ intel,ixp4xx-eb-write-enable = <1>;
+ intel,ixp4xx-eb-byte-access = <1>;
+ };
+ };
--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Intel IXP4xx Expansion Bus
+
+description:
+ The IXP4xx expansion bus controller handles access to devices on the
+ memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+ including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+ intel,ixp4xx-eb-t1:
+ description: Address timing, extend address phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ intel,ixp4xx-eb-t2:
+ description: Setup chip select timing, extend setup phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ intel,ixp4xx-eb-t3:
+ description: Strobe timing, extend strobe phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+
+ intel,ixp4xx-eb-t4:
+ description: Hold timing, extend hold phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 3
+
+ intel,ixp4xx-eb-t5:
+ description: Recovery timing, extend recovery phase with n cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 15
+
+ intel,ixp4xx-eb-cycle-type:
+ description: The type of cycles to use on the expansion bus for this
+ chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+
+ intel,ixp4xx-eb-byte-access-on-halfword:
+ description: Allow byte read access on half word devices.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-hpi-hrdy-pol-high:
+ description: Set HPI HRDY polarity to active high when using HPI.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-mux-address-and-data:
+ description: Multiplex address and data on the data bus.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-ahb-split-transfers:
+ description: Enable AHB split transfers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-write-enable:
+ description: Enable write cycles.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ intel,ixp4xx-eb-byte-access:
+ description: Expansion bus uses only 8 bits. The default is to use
+ 16 bits.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+additionalProperties: true
# The controller specific properties go here.
allOf:
- $ref: st,stm32-fmc2-ebi-props.yaml#
+ - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
additionalProperties: true
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
-F: Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
+F: Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion*
F: Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
F: Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
F: Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
projects / platform / kernel / linux-starfive.git / commitdiff