usb: phy: samsung: Introducing usb phy driver for hsotg
authorPraveen Paneri <p.paneri@samsung.com>
Fri, 23 Nov 2012 10:33:06 +0000 (16:03 +0530)
committerFelipe Balbi <balbi@ti.com>
Fri, 18 Jan 2013 13:06:30 +0000 (15:06 +0200)
This driver uses usb_phy interface to interact with s3c-hsotg. Supports
phy_init and phy_shutdown functions to enable/disable usb phy. Support
will be extended to host controllers and more Samsung SoCs.

Signed-off-by: Praveen Paneri <p.paneri@samsung.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Documentation/devicetree/bindings/usb/samsung-usbphy.txt [new file with mode: 0644]
drivers/usb/phy/Kconfig
drivers/usb/phy/Makefile
drivers/usb/phy/samsung-usbphy.c [new file with mode: 0644]
include/linux/platform_data/samsung-usbphy.h [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/Documentation/devicetree/bindings/usb/samsung-usbphy.txt
new file mode 100644 (file)
index 0000000..7b26e2d
--- /dev/null
@@ -0,0 +1,11 @@
+* Samsung's usb phy transceiver
+
+The Samsung's phy transceiver is used for controlling usb otg phy for
+s3c-hsotg usb device controller.
+TODO: Adding the PHY binding with controller(s) according to the under
+developement generic PHY driver.
+
+Required properties:
+- compatible : should be "samsung,exynos4210-usbphy"
+- reg : base physical address of the phy registers and length of memory mapped
+       region.
index 5de6e7f..36a85b6 100644 (file)
@@ -45,3 +45,11 @@ config USB_RCAR_PHY
 
          To compile this driver as a module, choose M here: the
          module will be called rcar-phy.
+
+config SAMSUNG_USBPHY
+       bool "Samsung USB PHY controller Driver"
+       depends on USB_S3C_HSOTG
+       select USB_OTG_UTILS
+       help
+         Enable this to support Samsung USB phy controller for samsung
+         SoCs.
index 1a579a8..ec304f6 100644 (file)
@@ -9,3 +9,4 @@ obj-$(CONFIG_USB_ISP1301)               += isp1301.o
 obj-$(CONFIG_MV_U3D_PHY)               += mv_u3d_phy.o
 obj-$(CONFIG_USB_EHCI_TEGRA)   += tegra_usb_phy.o
 obj-$(CONFIG_USB_RCAR_PHY)             += rcar-phy.o
+obj-$(CONFIG_SAMSUNG_USBPHY)           += samsung-usbphy.o
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
new file mode 100644 (file)
index 0000000..5c5e1bb
--- /dev/null
@@ -0,0 +1,354 @@
+/* linux/drivers/usb/phy/samsung-usbphy.c
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Author: Praveen Paneri <p.paneri@samsung.com>
+ *
+ * Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_data/samsung-usbphy.h>
+
+/* Register definitions */
+
+#define SAMSUNG_PHYPWR                         (0x00)
+
+#define PHYPWR_NORMAL_MASK                     (0x19 << 0)
+#define PHYPWR_OTG_DISABLE                     (0x1 << 4)
+#define PHYPWR_ANALOG_POWERDOWN                        (0x1 << 3)
+#define PHYPWR_FORCE_SUSPEND                   (0x1 << 1)
+/* For Exynos4 */
+#define PHYPWR_NORMAL_MASK_PHY0                        (0x39 << 0)
+#define PHYPWR_SLEEP_PHY0                      (0x1 << 5)
+
+#define SAMSUNG_PHYCLK                         (0x04)
+
+#define PHYCLK_MODE_USB11                      (0x1 << 6)
+#define PHYCLK_EXT_OSC                         (0x1 << 5)
+#define PHYCLK_COMMON_ON_N                     (0x1 << 4)
+#define PHYCLK_ID_PULL                         (0x1 << 2)
+#define PHYCLK_CLKSEL_MASK                     (0x3 << 0)
+#define PHYCLK_CLKSEL_48M                      (0x0 << 0)
+#define PHYCLK_CLKSEL_12M                      (0x2 << 0)
+#define PHYCLK_CLKSEL_24M                      (0x3 << 0)
+
+#define SAMSUNG_RSTCON                         (0x08)
+
+#define RSTCON_PHYLINK_SWRST                   (0x1 << 2)
+#define RSTCON_HLINK_SWRST                     (0x1 << 1)
+#define RSTCON_SWRST                           (0x1 << 0)
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+enum samsung_cpu_type {
+       TYPE_S3C64XX,
+       TYPE_EXYNOS4210,
+};
+
+/*
+ * struct samsung_usbphy - transceiver driver state
+ * @phy: transceiver structure
+ * @plat: platform data
+ * @dev: The parent device supplied to the probe function
+ * @clk: usb phy clock
+ * @regs: usb phy register memory base
+ * @ref_clk_freq: reference clock frequency selection
+ * @cpu_type: machine identifier
+ */
+struct samsung_usbphy {
+       struct usb_phy  phy;
+       struct samsung_usbphy_data *plat;
+       struct device   *dev;
+       struct clk      *clk;
+       void __iomem    *regs;
+       int             ref_clk_freq;
+       int             cpu_type;
+};
+
+#define phy_to_sphy(x)         container_of((x), struct samsung_usbphy, phy)
+
+/*
+ * Returns reference clock frequency selection value
+ */
+static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
+{
+       struct clk *ref_clk;
+       int refclk_freq = 0;
+
+       ref_clk = clk_get(sphy->dev, "xusbxti");
+       if (IS_ERR(ref_clk)) {
+               dev_err(sphy->dev, "Failed to get reference clock\n");
+               return PTR_ERR(ref_clk);
+       }
+
+       switch (clk_get_rate(ref_clk)) {
+       case 12 * MHZ:
+               refclk_freq = PHYCLK_CLKSEL_12M;
+               break;
+       case 24 * MHZ:
+               refclk_freq = PHYCLK_CLKSEL_24M;
+               break;
+       case 48 * MHZ:
+               refclk_freq = PHYCLK_CLKSEL_48M;
+               break;
+       default:
+               if (sphy->cpu_type == TYPE_S3C64XX)
+                       refclk_freq = PHYCLK_CLKSEL_48M;
+               else
+                       refclk_freq = PHYCLK_CLKSEL_24M;
+               break;
+       }
+       clk_put(ref_clk);
+
+       return refclk_freq;
+}
+
+static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
+{
+       void __iomem *regs = sphy->regs;
+       u32 phypwr;
+       u32 phyclk;
+       u32 rstcon;
+
+       /* set clock frequency for PLL */
+       phyclk = sphy->ref_clk_freq;
+       phypwr = readl(regs + SAMSUNG_PHYPWR);
+       rstcon = readl(regs + SAMSUNG_RSTCON);
+
+       switch (sphy->cpu_type) {
+       case TYPE_S3C64XX:
+               phyclk &= ~PHYCLK_COMMON_ON_N;
+               phypwr &= ~PHYPWR_NORMAL_MASK;
+               rstcon |= RSTCON_SWRST;
+               break;
+       case TYPE_EXYNOS4210:
+               phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
+               rstcon |= RSTCON_SWRST;
+       default:
+               break;
+       }
+
+       writel(phyclk, regs + SAMSUNG_PHYCLK);
+       /* Configure PHY0 for normal operation*/
+       writel(phypwr, regs + SAMSUNG_PHYPWR);
+       /* reset all ports of PHY and Link */
+       writel(rstcon, regs + SAMSUNG_RSTCON);
+       udelay(10);
+       rstcon &= ~RSTCON_SWRST;
+       writel(rstcon, regs + SAMSUNG_RSTCON);
+}
+
+static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
+{
+       void __iomem *regs = sphy->regs;
+       u32 phypwr;
+
+       phypwr = readl(regs + SAMSUNG_PHYPWR);
+
+       switch (sphy->cpu_type) {
+       case TYPE_S3C64XX:
+               phypwr |= PHYPWR_NORMAL_MASK;
+               break;
+       case TYPE_EXYNOS4210:
+               phypwr |= PHYPWR_NORMAL_MASK_PHY0;
+       default:
+               break;
+       }
+
+       /* Disable analog and otg block power */
+       writel(phypwr, regs + SAMSUNG_PHYPWR);
+}
+
+/*
+ * The function passed to the usb driver for phy initialization
+ */
+static int samsung_usbphy_init(struct usb_phy *phy)
+{
+       struct samsung_usbphy *sphy;
+       int ret = 0;
+
+       sphy = phy_to_sphy(phy);
+
+       /* Enable the phy clock */
+       ret = clk_prepare_enable(sphy->clk);
+       if (ret) {
+               dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+               return ret;
+       }
+
+       /* Disable phy isolation */
+       if (sphy->plat && sphy->plat->pmu_isolation)
+               sphy->plat->pmu_isolation(false);
+
+       /* Initialize usb phy registers */
+       samsung_usbphy_enable(sphy);
+
+       /* Disable the phy clock */
+       clk_disable_unprepare(sphy->clk);
+       return ret;
+}
+
+/*
+ * The function passed to the usb driver for phy shutdown
+ */
+static void samsung_usbphy_shutdown(struct usb_phy *phy)
+{
+       struct samsung_usbphy *sphy;
+
+       sphy = phy_to_sphy(phy);
+
+       if (clk_prepare_enable(sphy->clk)) {
+               dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
+               return;
+       }
+
+       /* De-initialize usb phy registers */
+       samsung_usbphy_disable(sphy);
+
+       /* Enable phy isolation */
+       if (sphy->plat && sphy->plat->pmu_isolation)
+               sphy->plat->pmu_isolation(true);
+
+       clk_disable_unprepare(sphy->clk);
+}
+
+static const struct of_device_id samsung_usbphy_dt_match[];
+
+static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
+{
+       if (pdev->dev.of_node) {
+               const struct of_device_id *match;
+               match = of_match_node(samsung_usbphy_dt_match,
+                                                       pdev->dev.of_node);
+               return (int) match->data;
+       }
+
+       return platform_get_device_id(pdev)->driver_data;
+}
+
+static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
+{
+       struct samsung_usbphy *sphy;
+       struct samsung_usbphy_data *pdata;
+       struct device *dev = &pdev->dev;
+       struct resource *phy_mem;
+       void __iomem    *phy_base;
+       struct clk *clk;
+
+       pdata = pdev->dev.platform_data;
+       if (!pdata) {
+               dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
+               return -EINVAL;
+       }
+
+       phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!phy_mem) {
+               dev_err(dev, "%s: missing mem resource\n", __func__);
+               return -ENODEV;
+       }
+
+       phy_base = devm_request_and_ioremap(dev, phy_mem);
+       if (!phy_base) {
+               dev_err(dev, "%s: register mapping failed\n", __func__);
+               return -ENXIO;
+       }
+
+       sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
+       if (!sphy)
+               return -ENOMEM;
+
+       clk = devm_clk_get(dev, "otg");
+       if (IS_ERR(clk)) {
+               dev_err(dev, "Failed to get otg clock\n");
+               return PTR_ERR(clk);
+       }
+
+       sphy->dev               = &pdev->dev;
+       sphy->plat              = pdata;
+       sphy->regs              = phy_base;
+       sphy->clk               = clk;
+       sphy->phy.dev           = sphy->dev;
+       sphy->phy.label         = "samsung-usbphy";
+       sphy->phy.init          = samsung_usbphy_init;
+       sphy->phy.shutdown      = samsung_usbphy_shutdown;
+       sphy->cpu_type          = samsung_usbphy_get_driver_data(pdev);
+       sphy->ref_clk_freq      = samsung_usbphy_get_refclk_freq(sphy);
+
+       platform_set_drvdata(pdev, sphy);
+
+       return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
+}
+
+static int __exit samsung_usbphy_remove(struct platform_device *pdev)
+{
+       struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
+
+       usb_remove_phy(&sphy->phy);
+
+       return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_usbphy_dt_match[] = {
+       {
+               .compatible = "samsung,s3c64xx-usbphy",
+               .data = (void *)TYPE_S3C64XX,
+       }, {
+               .compatible = "samsung,exynos4210-usbphy",
+               .data = (void *)TYPE_EXYNOS4210,
+       },
+       {},
+};
+MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
+#endif
+
+static struct platform_device_id samsung_usbphy_driver_ids[] = {
+       {
+               .name           = "s3c64xx-usbphy",
+               .driver_data    = TYPE_S3C64XX,
+       }, {
+               .name           = "exynos4210-usbphy",
+               .driver_data    = TYPE_EXYNOS4210,
+       },
+       {},
+};
+
+MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
+
+static struct platform_driver samsung_usbphy_driver = {
+       .probe          = samsung_usbphy_probe,
+       .remove         = __devexit_p(samsung_usbphy_remove),
+       .id_table       = samsung_usbphy_driver_ids,
+       .driver         = {
+               .name   = "samsung-usbphy",
+               .owner  = THIS_MODULE,
+               .of_match_table = of_match_ptr(samsung_usbphy_dt_match),
+       },
+};
+
+module_platform_driver(samsung_usbphy_driver);
+
+MODULE_DESCRIPTION("Samsung USB phy controller");
+MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-usbphy");
diff --git a/include/linux/platform_data/samsung-usbphy.h b/include/linux/platform_data/samsung-usbphy.h
new file mode 100644 (file)
index 0000000..1bd24cb
--- /dev/null
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *             http://www.samsung.com/
+ * Author: Praveen Paneri <p.paneri@samsung.com>
+ *
+ * Defines platform data for samsung usb phy driver.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __SAMSUNG_USBPHY_PLATFORM_H
+#define __SAMSUNG_USBPHY_PLATFORM_H
+
+/**
+ * samsung_usbphy_data - Platform data for USB PHY driver.
+ * @pmu_isolation: Function to control usb phy isolation in PMU.
+ */
+struct samsung_usbphy_data {
+       void (*pmu_isolation)(int on);
+};
+
+extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
+
+#endif /* __SAMSUNG_USBPHY_PLATFORM_H */