* monitor.c array-rom.c monitor.h rom68k-rom.c: Move target_ops

	into monitor.c.
	* monitor.c (monitor_create_inferior):  Allow run command to start
	program.

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index d382ccf..dc2bb8d 100644 (file)
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,10 @@
 Tue Mar  7 00:23:47 1995  Stu Grossman  (grossman@cygnus.com)
 
+       * monitor.c array-rom.c monitor.h rom68k-rom.c:  Move target_ops
+       into monitor.c.
+       * monitor.c (monitor_create_inferior):  Allow run command to start
+       program.
+
        * monitor.c (monitor_load):  Set PC to start address when done
        loading.
 

diff --git a/gdb/array-rom.c b/gdb/array-rom.c
index 02f3d2e..23c20a8 100644 (file)
--- a/gdb/array-rom.c
+++ b/gdb/array-rom.c
@@ -44,48 +44,7 @@ extern int mips_set_processor_type();
  * strings. We also need a CR or LF on the end.
  */
 
-static struct target_ops array_ops = {
-  "array",                     /* to_shortname */
-  "Debug using the standard GDB remote protocol for the Array Tech target.",
-  "Debug using the standard GDB remote protocol for the Array Tech target.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
-  array_open,                  /* to_open */
-  monitor_close,               /* to_close */
-  NULL,                                /* to_attach */
-  monitor_detach,              /* to_detach */
-  monitor_resume,              /* to_resume */
-  monitor_wait,                        /* to_wait */
-  monitor_fetch_registers,     /* to_fetch_registers */
-  monitor_store_registers,     /* to_store_registers */
-  monitor_prepare_to_store,    /* to_prepare_to_store */
-  monitor_xfer_memory,         /* to_xfer_memory */
-  monitor_files_info,          /* to_files_info */
-  monitor_insert_breakpoint,   /* to_insert_breakpoint */
-  monitor_remove_breakpoint,   /* to_remove_breakpoint */
-  0,                           /* to_terminal_init */
-  0,                           /* to_terminal_inferior */
-  0,                           /* to_terminal_ours_for_output */
-  0,                           /* to_terminal_ours */
-  0,                           /* to_terminal_info */
-  monitor_kill,                        /* to_kill */
-  monitor_load,                        /* to_load */
-  0,                           /* to_lookup_symbol */
-  NULL,                                /* to_create_inferior */
-  monitor_mourn_inferior,      /* to_mourn_inferior */
-  0,                           /* to_can_run */
-  0,                           /* to_notice_signals */
-  0,                            /* to_stop */
-  process_stratum,             /* to_stratum */
-  0,                           /* to_next */
-  1,                           /* to_has_all_memory */
-  1,                           /* to_has_memory */
-  1,                           /* to_has_stack */
-  1,                           /* to_has_registers */
-  1,                           /* to_has_execution */
-  0,                           /* sections */
-  0,                           /* sections_end */
-  OPS_MAGIC                    /* to_magic */
-};
+static struct target_ops array_ops;
 
 static char *array_loadtypes[] = {"none", "srec", "default", NULL};
 static char *array_loadprotos[] = {"none", NULL};
@@ -152,6 +111,14 @@ array_open(args, from_tty)
 void
 _initialize_array ()
 {
+  init_monitor_ops (&array_ops);
+
+  array_ops.to_shortname = "array";
+  array_ops.to_longname = "Debug using the standard GDB remote protocol for the Array Tech target.";
+  array_ops.to_doc = "Debug using the standard GDB remote protocol for the Array Tech target.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  array_ops.to_open = array_open;
+
   add_target (&array_ops);
   baud_rate = 4800;                    /* this is the only supported baud rate */
 }

diff --git a/gdb/monitor.h b/gdb/monitor.h
index 30dc3a6..ad21b02 100644 (file)
--- a/gdb/monitor.h
+++ b/gdb/monitor.h
@@ -122,22 +122,6 @@ extern struct monitor_ops        *current_monitor;
 #define SREC_SIZE 160
 #define GDBPROTO               ((current_monitor->type) ? 0: 1)
 
-extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops, int from_tty));
-extern void monitor_close PARAMS ((int quitting));
-extern void monitor_detach PARAMS ((char *args, int from_tty));
-extern void monitor_resume PARAMS ((int pid, int step, enum target_signal sig));
-extern int  monitor_wait PARAMS ((int pid, struct target_waitstatus *status));
-extern void monitor_fetch_registers PARAMS ((int regno));
-extern void monitor_store_registers PARAMS ((int regno));
-extern void monitor_prepare_to_store();
-extern int  monitor_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len, int write, struct target_ops *target));
-extern void monitor_files_info();
-extern int  monitor_insert_breakpoint();
-extern int  monitor_remove_breakpoint();
-extern void monitor_kill();
-extern void monitor_load();
-extern void monitor_mourn_inferior PARAMS ((void));
-
 /*
  * FIXME: These are to temporarily maintain compatability with the
  *     old monitor structure till remote-mon.c is fixed to work
@@ -147,3 +131,5 @@ extern void monitor_mourn_inferior PARAMS ((void));
 #define MEM_SET_CMD            (current_monitor->setmem)
 #define MEM_DIS_CMD            (current_monitor->getmem)
 #define REG_DELIM               (current_monitor->regset.delim)
+
+extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops, int from_tty));

diff --git a/gdb/rom68k-rom.c b/gdb/rom68k-rom.c
index 2170b14..5673d50 100644 (file)
--- a/gdb/rom68k-rom.c
+++ b/gdb/rom68k-rom.c
@@ -44,48 +44,7 @@ static char *rom68k_regnames[NUM_REGS] = {
  * strings. We also need a CR or LF on the end.
  */
 
-static struct target_ops rom68k_ops = {
-  "rom68k",                    /* to_shortname */
-  "Rom68k debug monitor for the IDP Eval board", /* to_longname */
-  "Debug on a Motorola IDP eval board running the ROM68K monitor.\n\
-Specify the serial device it is connected to (e.g. /dev/ttya).",
-  rom68k_open,                 /* to_open */
-  monitor_close,               /* to_close */
-  NULL,                                /* to_attach */
-  monitor_detach,              /* to_detach */
-  monitor_resume,              /* to_resume */
-  monitor_wait,                        /* to_wait */
-  monitor_fetch_registers,     /* to_fetch_registers */
-  monitor_store_registers,     /* to_store_registers */
-  monitor_prepare_to_store,    /* to_prepare_to_store */
-  monitor_xfer_memory,         /* to_xfer_memory */
-  monitor_files_info,          /* to_files_info */
-  monitor_insert_breakpoint,   /* to_insert_breakpoint */
-  monitor_remove_breakpoint,   /* to_remove_breakpoint */
-  0,                           /* to_terminal_init */
-  0,                           /* to_terminal_inferior */
-  0,                           /* to_terminal_ours_for_output */
-  0,                           /* to_terminal_ours */
-  0,                           /* to_terminal_info */
-  monitor_kill,                        /* to_kill */
-  monitor_load,                        /* to_load */
-  0,                           /* to_lookup_symbol */
-  NULL,                                /* to_create_inferior */
-  monitor_mourn_inferior,      /* to_mourn_inferior */
-  0,                           /* to_can_run */
-  0,                           /* to_notice_signals */
-  0,                            /* to_stop */
-  process_stratum,             /* to_stratum */
-  0,                           /* to_next */
-  1,                           /* to_has_all_memory */
-  1,                           /* to_has_memory */
-  1,                           /* to_has_stack */
-  1,                           /* to_has_registers */
-  1,                           /* to_has_execution */
-  0,                           /* sections */
-  0,                           /* sections_end */
-  OPS_MAGIC                    /* to_magic */
-};
+static struct target_ops rom68k_ops;
 
 static char *rom68k_loadtypes[] = {"none", "srec", "default", NULL};
 static char *rom68k_loadprotos[] = {"none", NULL};
@@ -147,6 +106,14 @@ rom68k_open(args, from_tty)
 void
 _initialize_rom68k ()
 {
+  init_monitor_ops (&rom68k_ops);
+
+  rom68k_ops.to_shortname = "rom68k";
+  rom68k_ops.to_longname = "Rom68k debug monitor for the IDP Eval board";
+  rom68k_ops.to_doc = "Debug on a Motorola IDP eval board running the ROM68K monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  rom68k_ops.to_open = rom68k_open;
+
   add_target (&rom68k_ops);
 
   /* this is the default, since it's the only baud rate supported by the hardware */