davinci: Add DA830/OMAP-L137 EVM specific pinmux setting for McASP1

The DA830/OMAP-L137 EVM cannot use the default pinmux setup for McASP1
so put the correct settings in the board file for that platform.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 22d9fe4..39711c1 100644 (file)
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -22,6 +22,7 @@
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/cp_intc.h>
+#include <mach/mux.h>
 #include <mach/da8xx.h>
 #include <mach/asp.h>
 
@@ -55,6 +56,14 @@ static struct davinci_uart_config da830_evm_uart_config __initdata = {
        .enabled_uarts = 0x7,
 };
 
+static const short da830_evm_mcasp1_pins[] = {
+       DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
+       DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
+       DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
+       DA830_AXR1_11,
+       -1
+};
+
 static u8 da830_iis_serializer_direction[] = {
        RX_MODE,        INACTIVE_MODE,  INACTIVE_MODE,  INACTIVE_MODE,
        INACTIVE_MODE,  TX_MODE,        INACTIVE_MODE,  INACTIVE_MODE,
@@ -117,7 +126,7 @@ static __init void da830_evm_init(void)
        i2c_register_board_info(1, da830_evm_i2c_devices,
                        ARRAY_SIZE(da830_evm_i2c_devices));
 
-       ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+       ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins);
        if (ret)
                pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
                                ret);