pinctrl: amd: Use amd_pinconf_set() for all config options
authorMario Limonciello <mario.limonciello@amd.com>
Wed, 5 Jul 2023 13:30:03 +0000 (08:30 -0500)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sun, 23 Jul 2023 11:49:30 +0000 (13:49 +0200)
commit 635a750d958e158e17af0f524bedc484b27fbb93 upstream.

On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to
GPIO 7 is causing an interrupt storm.  This issue doesn't happen on
Windows.

Comparing the GPIO register configuration between Windows and Linux
bit 20 has been configured as a pull up on Windows, but not on Linux.
Checking GPIO declaration from the firmware it is clear it *should* have
been a pull up on Linux as well.

```
GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000,
 "\\_SB.GPIO", 0x00, ResourceConsumer, ,)
{   // Pin list
0x0007
}
```

On Linux amd_gpio_set_config() is currently only used for programming
the debounce. Actually the GPIO core calls it with all the arguments
that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`.

To solve this issue expand amd_gpio_set_config() to support the other
arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`,
`PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`.

Reported-by: Nik P <npliashechnikov@gmail.com>
Reported-by: Nathan Schulte <nmschulte@gmail.com>
Reported-by: Friedrich Vock <friedrich.vock@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336
Reported-by: dridri85@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493
Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/
Tested-by: Jan Visser <starquake@linuxeverywhere.org>
Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/pinctrl/pinctrl-amd.c

index b3a3bb155dea5346d33b3ef099d3d07267cee00a..300e735ca57c4a046c84e7cbd4c3a13643238067 100644 (file)
@@ -188,18 +188,6 @@ static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
        return ret;
 }
 
-static int amd_gpio_set_config(struct gpio_chip *gc, unsigned offset,
-                              unsigned long config)
-{
-       u32 debounce;
-
-       if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
-               return -ENOTSUPP;
-
-       debounce = pinconf_to_config_argument(config);
-       return amd_gpio_set_debounce(gc, offset, debounce);
-}
-
 #ifdef CONFIG_DEBUG_FS
 static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 {
@@ -782,7 +770,7 @@ static int amd_pinconf_get(struct pinctrl_dev *pctldev,
 }
 
 static int amd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
-                               unsigned long *configs, unsigned num_configs)
+                          unsigned long *configs, unsigned int num_configs)
 {
        int i;
        u32 arg;
@@ -872,6 +860,20 @@ static int amd_pinconf_group_set(struct pinctrl_dev *pctldev,
        return 0;
 }
 
+static int amd_gpio_set_config(struct gpio_chip *gc, unsigned int pin,
+                              unsigned long config)
+{
+       struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
+
+       if (pinconf_to_config_param(config) == PIN_CONFIG_INPUT_DEBOUNCE) {
+               u32 debounce = pinconf_to_config_argument(config);
+
+               return amd_gpio_set_debounce(gc, pin, debounce);
+       }
+
+       return amd_pinconf_set(gpio_dev->pctrl, pin, &config, 1);
+}
+
 static const struct pinconf_ops amd_pinconf_ops = {
        .pin_config_get         = amd_pinconf_get,
        .pin_config_set         = amd_pinconf_set,