Remove BOARDLIBS usage completely

Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/Makefile b/Makefile
index 9a27bc2..15dec17 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -197,6 +197,9 @@ LIBS += cpu/$(CPU)/lib$(CPU).a
 ifdef SOC
 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 endif
+ifeq ($(CPU),ixp)
+LIBS += cpu/ixp/npe/libnpe.a
+endif
 LIBS += lib_$(ARCH)/lib$(ARCH).a
 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
        fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
@@ -219,7 +222,6 @@ LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
 LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
        "post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
 LIBS += common/libcommon.a
-LIBS += $(BOARDLIBS)
 
 LIBS := $(addprefix $(obj),$(LIBS))
 .PHONY : $(LIBS)

diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk
index d49c0e7..0436c5b 100644 (file)
--- a/board/ixdp425/config.mk
+++ b/board/ixdp425/config.mk
@@ -1,4 +1 @@
 TEXT_BASE = 0x00f80000
-
-# include NPE ethernet driver
-BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a

diff --git a/board/mpc8360emds/config.mk b/board/mpc8360emds/config.mk
index 5801a5f..9ace886 100644 (file)
--- a/board/mpc8360emds/config.mk
+++ b/board/mpc8360emds/config.mk
@@ -26,8 +26,3 @@
 #
 
 TEXT_BASE = 0xFE000000
-
-#
-# Additional board-specific libraries
-#
-BOARDLIBS = libfdt/libfdt.a

diff --git a/board/nc650/config.mk b/board/nc650/config.mk
index 52c8ffe..b5c9df2 100644 (file)
--- a/board/nc650/config.mk
+++ b/board/nc650/config.mk
@@ -27,4 +27,3 @@
 #
 
 TEXT_BASE = 0x40700000
-BOARDLIBS = $(obj)drivers/nand/libnand.a

diff --git a/board/prodrive/pdnb3/config.mk b/board/prodrive/pdnb3/config.mk
index 7670758..2f7cc3b 100644 (file)
--- a/board/prodrive/pdnb3/config.mk
+++ b/board/prodrive/pdnb3/config.mk
@@ -1,4 +1 @@
 TEXT_BASE = 0x01f00000
-
-# include NPE ethernet driver
-BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a

diff --git a/cpu/ixp/npe/Makefile b/cpu/ixp/npe/Makefile
index 4de34fd..7f020b5 100644 (file)
--- a/cpu/ixp/npe/Makefile
+++ b/cpu/ixp/npe/Makefile
@@ -87,7 +87,7 @@ START := $(addprefix $(obj),$(START))
 
 all:   $(LIB)
 
-$(LIB):        $(obj).depend $(OBJS)
+$(LIB):        $(OBJS)
        $(AR) $(ARFLAGS) $@ $(OBJS)
 
 #########################################################################

diff --git a/doc/README.nand b/doc/README.nand
index b5171f4..5c31845 100644 (file)
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -192,12 +192,7 @@ The old NAND handling code has been re-factored and is now confined
 to only board-specific files and - unfortunately - to the DoC code
 (see below). A new configuration variable has been introduced:
 CFG_NAND_LEGACY, which has to be defined in the board config file if
-that board uses legacy code. If CFG_NAND_LEGACY is defined, the board
-specific config.mk file should also have "BOARDLIBS =
-drivers/nand_legacy/libnand_legacy.a". For boards using the new NAND
-approach (PPChameleon and netstar at the moment) no variable is
-necessary, but the config.mk should have "BOARDLIBS =
-drivers/nand/libnand.a".
+that board uses legacy code.
 
 The necessary changes have been made to all affected boards, and no
 build breakage has been introduced, except for NETTA and NETTA_ISDN

diff --git a/include/configs/delta.h b/include/configs/delta.h
index 91284fd..1568120 100644 (file)
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -188,7 +188,6 @@
 /*
  * NAND Flash
  */
-/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */
 #undef CFG_NAND_LEGACY
 
 #define CFG_NAND0_BASE         0x0 /* 0x43100040 */ /* 0x10000000 */

diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index c6aa8ec..1e8ed7a 100644 (file)
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -174,7 +174,6 @@
 /*
  * NAND Flash
  */
-/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */
 #define CONFIG_NEW_NAND_CODE
 #define CFG_NAND0_BASE         0x0
 #undef CFG_NAND1_BASE