* configure.in (mips-idt-ecoff): New target.
authorIan Lance Taylor <ian@airs.com>
Thu, 25 Feb 1993 19:15:32 +0000 (19:15 +0000)
committerIan Lance Taylor <ian@airs.com>
Thu, 25 Feb 1993 19:15:32 +0000 (19:15 +0000)
* config/mips-gdb.exp: New file for remote board using MIPS remote
debugging protocol.

gdb/testsuite/config/.Sanitize
gdb/testsuite/config/mips-gdb.exp [new file with mode: 0644]
gdb/testsuite/configure.in

index ae16056..c314127 100644 (file)
@@ -29,6 +29,7 @@ Things-to-keep:
 
 aout-gdb.exp
 coff-gdb.exp
+mips-gdb.exp
 udi-gdb.exp
 unix-gdb.exp
 vx-gdb.exp
diff --git a/gdb/testsuite/config/mips-gdb.exp b/gdb/testsuite/config/mips-gdb.exp
new file mode 100644 (file)
index 0000000..6282275
--- /dev/null
@@ -0,0 +1,247 @@
+#   Copyright (C) 1993 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+# This file was written by Ian Lance Taylor <ian@cygnus.com>.
+
+# GDB support routines for a board using the MIPS remote debugging
+# protocol.  These are actually pretty generic.
+
+# DejaGnu currently assumes that debugging is being done over the main
+# console port.  It would probably be more convenient for people using
+# IDT boards to permit the debugging port and the connected port to be
+# different, since an IDT board has two ports.  This would require
+# extending some of the tests in a fashion similar to that done for
+# VxWorks, because the test output would appear on the other port,
+# rather than being displayed by gdb.
+
+set prompt "\(gdb\)"
+
+load_lib remote.exp
+load_lib gdb.exp
+
+#
+# gdb_version -- extract and print the version number of gdb
+#
+proc gdb_version {} {
+    global GDB
+    global GDBFLAGS
+    global prompt
+    set tmp [exec echo "q" | $GDB]
+    set version [lindex $tmp [lsearch $tmp "\[0-9\]*"]]
+    set version [string range $version 0 [expr [string length $version]-2]]
+    clone_output "[which $GDB] version $version $GDBFLAGS\n"
+}
+
+#
+# gdb_load -- load a file into the GDB. 
+#             Returns a 0 if there was an error,
+#                       1 if it load successfully.
+#
+proc gdb_load { arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global prompt
+    global spawn_id
+    global GDB
+    global expect_out
+
+    set loadfile [file tail $arg]
+    set loadpath [file dirname $arg]
+    gdb_unload
+    send "file $arg\n"
+    expect {
+       -re "A program is being debugged already.  Kill it\? \(y or n\)" {
+           send "y\n"
+           continue -expect
+       }
+       -re "Reading symbols from.*done..*$prompt $" { }
+       -re "$prompt $" { error "GDB couldn't read file" }
+       timeout { error "(timeout) read symbol file" ; return }
+    }
+    send "load $arg\n"
+    if $verbose>1 then {
+       send_user "Loading $arg into $GDB\n"
+    }
+    set timeout 1200
+    expect {
+       -re "Loading.*$prompt $" {
+           if $verbose>1 then {
+               send_user "Loaded $arg into $GDB\n"
+           }
+           set timeout 30
+           return 1
+       }
+       -re "$prompt $"     {
+           if $verbose>1 then {
+               error "GDB couldn't load."
+           }
+       }
+       timeout {
+           if $verbose>1 then {
+               error "Timed out trying to load $arg."
+           }
+       }
+    }
+    set timeout 10
+    if [info exists expect_out(buffer)] then {
+       send_log $expect_out(buffer)
+    }
+    return 0
+}
+
+#
+# gdb_exit -- exit the GDB
+#
+proc gdb_exit {} {
+    global GDB
+    global GDBFLAGS
+    global verbose
+
+    set timeout 5
+    send "quit\n"
+    expect {
+       eof { 
+           if $verbose>1 then {
+               send_user "Got EOF from $GDB\n"
+           }
+       }
+       timeout { 
+           if $verbose>1 then {
+               send_user "Got TIMEOUT from $GDB\n"
+           }
+       }
+       -re "The program is running.  Quit anyway? (y or n) $" {
+           send "y\n"
+           if $verbose>1 then {
+               send_user "\t\tKilling program being debugged\n"
+           }
+       }
+    }
+    if $verbose>1 then {
+       send_user "Quitting $GDB $GDBFLAGS\n"
+    }
+    close
+}
+
+#
+# gdb_start -- start GDB running.
+#
+proc gdb_start { } {
+    global GDB
+    global GDBFLAGS
+    global spawn_id
+    global shell_id
+    global prompt
+    global verbose
+    global targetname
+    global connectmode
+    global reboot
+    global baud
+
+    # reboot the board to get a clean start
+    if $reboot then {
+       if ![info exists connectmode] then {
+           set connectmode "kermit"
+       }       
+       if ![info exists baud] then {
+           set baud 9600
+       }
+       set shell_id [ eval $connectmode "$targetname" $baud ]
+       send -i $shell_id "\CC"
+       expect -i $shell_id {
+           -re "<IDT>$" { }
+           timeout     { error "(timeout) board did not come up."; alldone }
+       }
+       send -i $shell_id "go 0xbfc00000"
+       expect -i $shell_id {
+           -re "<IDT>$" { }
+           timeout     { error "(timeout) board did not come up."; alldone }
+       }
+       exit_remote_shell $shell_id
+    }
+
+    set GDB [which $GDB]
+    # start GDB
+    if [ llength $GDBFLAGS ] then {
+       spawn $GDB $GDBFLAGS
+    } else {
+       spawn $GDB
+    }
+    expect  {
+       -re "GDB.*$prompt $"   {
+           if $verbose>1 then {
+               send_user "$GDB initialized for cross mode\n\n"
+           }
+       }
+       -re "$prompt $"     { error "GDB never initialized."; alldone }
+       timeout             { error "(timeout) GDB never initialized.";
+                             alldone }
+    }
+
+    # force the height to "unlimited", so no pagers get used
+    send "set height 0\n"
+    expect -re ".*$prompt $" {}
+    # force the width to "unlimited", so no wraparound occurs
+    send "set width 0\n"
+    expect -re ".*$prompt $" {}
+
+    # Don't use floating point instructions, in case the board doesn't
+    # support them.
+    send "set mipsfpu off\n"
+    expect -re ".*$prompt $" {}
+
+    if $verbose>1 then {
+       send_user "Setting up target, please wait...\n"
+    }
+    send "target mips $targetname\n"
+    set timeout 60
+    expect {
+       -re "Remote MIPS debugging.*$prompt $"  {
+           if $verbose>1 then {
+               send_user "Set target to $targetname\n"
+           }
+       }
+       timeout { 
+           error "Couldn't set MIPS target."
+           set timeout 10
+           alldone
+       }
+    }
+    set timeout 10
+}
+
+expect_after {
+    "<return>"            { send "\n"; error "Window too small." }
+    -re "\(y or n\) "     { send "n\n"; error "Got interactive prompt." }
+    buffer_full                   { error "internal buffer is full." }
+    eof                           { error "eof -- pty is hosed." }
+    timeout                       { error "timeout." }
+    "virtual memory exhausted" { error "virtual memory exhausted." }
+    "Undefined command"           { error "send string probably wrong." }
+}
+
+gdb_start
+
+# make sure gdb has actually started, otherwise if the first test
+# timesout, DejaGnu crashes
+send "\n"
+expect {
+    -re "$prompt"
+    }
index 9839a5d..b4ddffd 100644 (file)
@@ -42,6 +42,8 @@ a29k-*-udi)           target_abbrev=udi ;
                                target_makefile_frag=config/mt-a29k-udi ;;
 a29k-isstip-*)         target_abbrev=itip ; 
                                target_makefile_frag=config/mt-a29k-isstip ;;
+mips-idt-ecoff)                target_abbrev=mips ;
+                               target_makefile_frag=config/mt-mips ;;
 esac
 
        # link in the lib directory if needed