#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-i2c-drv.h>
#include "ovcamchip_priv.h"
#define DRIVER_VERSION "v2.27 for Linux 2.6"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
+
/* Registers common to all chips, that are needed for detection */
#define GENERIC_REG_ID_HIGH 0x1C /* manufacturer ID MSB */
#define GENERIC_REG_ID_LOW 0x1D /* manufacturer ID LSB */
[CC_OV6630AF] = "OV6630AF",
};
-/* Forward declarations */
-static struct i2c_driver driver;
-static struct i2c_client client_template;
-
/* ----------------------------------------------------------------------- */
int ov_write_regvals(struct i2c_client *c, struct ovcamchip_regvals *rvals)
/* Test for 7xx0 */
PDEBUG(3, "Testing for 0V7xx0");
- c->addr = OV7xx0_SID;
- if (init_camchip(c) < 0) {
- /* Test for 6xx0 */
- PDEBUG(3, "Testing for 0V6xx0");
- c->addr = OV6xx0_SID;
- if (init_camchip(c) < 0) {
- return -ENODEV;
- } else {
- if (ov6xx0_detect(c) < 0) {
- PERROR("Failed to init OV6xx0");
- return -EIO;
- }
- }
- } else {
+ if (init_camchip(c) < 0)
+ return -ENODEV;
+ /* 7-bit addresses with bit 0 set are for the OV7xx0 */
+ if (c->addr & 1) {
if (ov7xx0_detect(c) < 0) {
PERROR("Failed to init OV7xx0");
return -EIO;
}
+ return 0;
+ }
+ /* Test for 6xx0 */
+ PDEBUG(3, "Testing for 0V6xx0");
+ if (ov6xx0_detect(c) < 0) {
+ PERROR("Failed to init OV6xx0");
+ return -EIO;
}
-
return 0;
}
/* ----------------------------------------------------------------------- */
-static int ovcamchip_attach(struct i2c_adapter *adap)
-{
- int rc = 0;
- struct ovcamchip *ov;
- struct i2c_client *c;
-
- /* I2C is not a PnP bus, so we can never be certain that we're talking
- * to the right chip. To prevent damage to EEPROMS and such, only
- * attach to adapters that are known to contain OV camera chips. */
-
- switch (adap->id) {
- case I2C_HW_SMBUS_OV511:
- case I2C_HW_SMBUS_OV518:
- case I2C_HW_SMBUS_W9968CF:
- PDEBUG(1, "Adapter ID 0x%06x accepted", adap->id);
- break;
- default:
- PDEBUG(1, "Adapter ID 0x%06x rejected", adap->id);
- return -ENODEV;
- }
-
- c = kmalloc(sizeof *c, GFP_KERNEL);
- if (!c) {
- rc = -ENOMEM;
- goto no_client;
- }
- memcpy(c, &client_template, sizeof *c);
- c->adapter = adap;
- strcpy(c->name, "OV????");
-
- ov = kzalloc(sizeof *ov, GFP_KERNEL);
- if (!ov) {
- rc = -ENOMEM;
- goto no_ov;
- }
- i2c_set_clientdata(c, ov);
-
- rc = ovcamchip_detect(c);
- if (rc < 0)
- goto error;
-
- strcpy(c->name, chip_names[ov->subtype]);
-
- PDEBUG(1, "Camera chip detection complete");
-
- i2c_attach_client(c);
-
- return rc;
-error:
- kfree(ov);
-no_ov:
- kfree(c);
-no_client:
- PDEBUG(1, "returning %d", rc);
- return rc;
-}
-
-static int ovcamchip_detach(struct i2c_client *c)
+static long ovcamchip_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
{
- struct ovcamchip *ov = i2c_get_clientdata(c);
- int rc;
-
- rc = ov->sops->free(c);
- if (rc < 0)
- return rc;
-
- i2c_detach_client(c);
-
- kfree(ov);
- kfree(c);
- return 0;
-}
-
-static int ovcamchip_command(struct i2c_client *c, unsigned int cmd, void *arg)
-{
- struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ovcamchip *ov = to_ovcamchip(sd);
+ struct i2c_client *c = v4l2_get_subdevdata(sd);
if (!ov->initialized &&
cmd != OVCAMCHIP_CMD_Q_SUBTYPE &&
cmd != OVCAMCHIP_CMD_INITIALIZE) {
- dev_err(&c->dev, "ERROR: Camera chip not initialized yet!\n");
+ v4l2_err(sd, "Camera chip not initialized yet!\n");
return -EPERM;
}
if (ov->mono) {
if (ov->subtype != CC_OV7620)
- dev_warn(&c->dev, "Warning: Monochrome not "
+ v4l2_warn(sd, "Monochrome not "
"implemented for this chip\n");
else
- dev_info(&c->dev, "Initializing chip as "
+ v4l2_info(sd, "Initializing chip as "
"monochrome\n");
}
}
}
+static int ovcamchip_command(struct i2c_client *client, unsigned cmd, void *arg)
+{
+ return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
+}
+
/* ----------------------------------------------------------------------- */
-static struct i2c_driver driver = {
- .driver = {
- .name = "ovcamchip",
- },
- .id = I2C_DRIVERID_OVCAMCHIP,
- .attach_adapter = ovcamchip_attach,
- .detach_client = ovcamchip_detach,
- .command = ovcamchip_command,
+static const struct v4l2_subdev_core_ops ovcamchip_core_ops = {
+ .ioctl = ovcamchip_ioctl,
};
-static struct i2c_client client_template = {
- .name = "(unset)",
- .driver = &driver,
+static const struct v4l2_subdev_ops ovcamchip_ops = {
+ .core = &ovcamchip_core_ops,
};
-static int __init ovcamchip_init(void)
+static int ovcamchip_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
-#ifdef DEBUG
- ovcamchip_debug = debug;
-#endif
+ struct ovcamchip *ov;
+ struct v4l2_subdev *sd;
+ int rc = 0;
- PINFO(DRIVER_VERSION " : " DRIVER_DESC);
- return i2c_add_driver(&driver);
+ ov = kzalloc(sizeof *ov, GFP_KERNEL);
+ if (!ov) {
+ rc = -ENOMEM;
+ goto no_ov;
+ }
+ sd = &ov->sd;
+ v4l2_i2c_subdev_init(sd, client, &ovcamchip_ops);
+
+ rc = ovcamchip_detect(client);
+ if (rc < 0)
+ goto error;
+
+ v4l_info(client, "%s found @ 0x%02x (%s)\n",
+ chip_names[ov->subtype], client->addr << 1, client->adapter->name);
+
+ PDEBUG(1, "Camera chip detection complete");
+
+ return rc;
+error:
+ kfree(ov);
+no_ov:
+ PDEBUG(1, "returning %d", rc);
+ return rc;
}
-static void __exit ovcamchip_exit(void)
+static int ovcamchip_remove(struct i2c_client *client)
{
- i2c_del_driver(&driver);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct ovcamchip *ov = to_ovcamchip(sd);
+ int rc;
+
+ v4l2_device_unregister_subdev(sd);
+ rc = ov->sops->free(client);
+ if (rc < 0)
+ return rc;
+
+ kfree(ov);
+ return 0;
}
-module_init(ovcamchip_init);
-module_exit(ovcamchip_exit);
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_device_id ovcamchip_id[] = {
+ { "ovcamchip", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ovcamchip_id);
+
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "ovcamchip",
+ .command = ovcamchip_command,
+ .probe = ovcamchip_probe,
+ .remove = ovcamchip_remove,
+ .id_table = ovcamchip_id,
+};
#define __LINUX_OVCAMCHIP_PRIV_H
#include <linux/i2c.h>
+#include <media/v4l2-subdev.h>
#include <media/ovcamchip.h>
#ifdef DEBUG
};
struct ovcamchip {
+ struct v4l2_subdev sd;
struct ovcamchip_ops *sops;
void *spriv; /* Private data for OV7x10.c etc... */
int subtype; /* = SEN_OV7610 etc... */
int initialized; /* OVCAMCHIP_CMD_INITIALIZE was successful */
};
+static inline struct ovcamchip *to_ovcamchip(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct ovcamchip, sd);
+}
+
extern struct ovcamchip_ops ov6x20_ops;
extern struct ovcamchip_ops ov6x30_ops;
extern struct ovcamchip_ops ov7x10_ops;
MODULE_LICENSE(W9968CF_MODULE_LICENSE);
MODULE_SUPPORTED_DEVICE("Video");
-static int ovmod_load = W9968CF_OVMOD_LOAD;
static unsigned short simcams = W9968CF_SIMCAMS;
static short video_nr[]={[0 ... W9968CF_MAX_DEVICES-1] = -1}; /*-1=first free*/
static unsigned int packet_size[] = {[0 ... W9968CF_MAX_DEVICES-1] =
static unsigned int param_nv[24]; /* number of values per parameter */
-#ifdef CONFIG_MODULES
-module_param(ovmod_load, bool, 0644);
-#endif
module_param(simcams, ushort, 0644);
module_param_array(video_nr, short, ¶m_nv[0], 0444);
module_param_array(packet_size, uint, ¶m_nv[1], 0444);
module_param(specific_debug, bool, 0644);
#endif
-#ifdef CONFIG_MODULES
-MODULE_PARM_DESC(ovmod_load,
- "\n<0|1> Automatic 'ovcamchip' module loading."
- "\n0 disabled, 1 enabled."
- "\nIf enabled,'insmod' searches for the required 'ovcamchip'"
- "\nmodule in the system, according to its configuration, and"
- "\nattempts to load that module automatically. This action is"
- "\nperformed once as soon as the 'w9968cf' module is loaded"
- "\ninto memory."
- "\nDefault value is "__MODULE_STRING(W9968CF_OVMOD_LOAD)"."
- "\n");
-#endif
MODULE_PARM_DESC(simcams,
"\n<n> Number of cameras allowed to stream simultaneously."
"\nn may vary from 0 to "
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data*);
static u32 w9968cf_i2c_func(struct i2c_adapter*);
-static int w9968cf_i2c_attach_inform(struct i2c_client*);
-static int w9968cf_i2c_detach_inform(struct i2c_client*);
/* Memory management */
static void* rvmalloc(unsigned long size);
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data)
{
- struct w9968cf_device* cam = i2c_get_adapdata(adapter);
+ struct v4l2_device *v4l2_dev = i2c_get_adapdata(adapter);
+ struct w9968cf_device *cam = to_cam(v4l2_dev);
u8 i;
int err = 0;
- switch (addr) {
- case OV6xx0_SID:
- case OV7xx0_SID:
- break;
- default:
- DBG(4, "Rejected slave ID 0x%04X", addr)
- return -EINVAL;
- }
-
if (size == I2C_SMBUS_BYTE) {
/* Why addr <<= 1? See OVXXX0_SID defines in ovcamchip.h */
addr <<= 1;
if (read_write == I2C_SMBUS_WRITE)
err = w9968cf_i2c_adap_write_byte(cam, addr, command);
else if (read_write == I2C_SMBUS_READ)
- err = w9968cf_i2c_adap_read_byte(cam,addr,&data->byte);
-
+ for (i = 1; i <= W9968CF_I2C_RW_RETRIES; i++) {
+ err = w9968cf_i2c_adap_read_byte(cam, addr,
+ &data->byte);
+ if (err) {
+ if (w9968cf_smbus_refresh_bus(cam)) {
+ err = -EIO;
+ break;
+ }
+ } else
+ break;
+ }
} else if (size == I2C_SMBUS_BYTE_DATA) {
addr <<= 1;
DBG(4, "Unsupported I2C transfer mode (%d)", size)
return -EINVAL;
}
-
return err;
}
}
-static int w9968cf_i2c_attach_inform(struct i2c_client* client)
-{
- struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
- int id = client->driver->id, err = 0;
-
- if (id == I2C_DRIVERID_OVCAMCHIP) {
- cam->sensor_client = client;
- err = w9968cf_sensor_init(cam);
- if (err) {
- cam->sensor_client = NULL;
- return err;
- }
- } else {
- DBG(4, "Rejected client [%s] with driver [%s]",
- client->name, client->driver->driver.name)
- return -EINVAL;
- }
-
- DBG(5, "I2C attach client [%s] with driver [%s]",
- client->name, client->driver->driver.name)
-
- return 0;
-}
-
-
-static int w9968cf_i2c_detach_inform(struct i2c_client* client)
-{
- struct w9968cf_device* cam = i2c_get_adapdata(client->adapter);
-
- if (cam->sensor_client == client)
- cam->sensor_client = NULL;
-
- DBG(5, "I2C detach client [%s]", client->name)
-
- return 0;
-}
-
-
static int w9968cf_i2c_init(struct w9968cf_device* cam)
{
int err = 0;
static struct i2c_adapter adap = {
.id = I2C_HW_SMBUS_W9968CF,
.owner = THIS_MODULE,
- .client_register = w9968cf_i2c_attach_inform,
- .client_unregister = w9968cf_i2c_detach_inform,
.algo = &algo,
};
memcpy(&cam->i2c_adapter, &adap, sizeof(struct i2c_adapter));
strcpy(cam->i2c_adapter.name, "w9968cf");
cam->i2c_adapter.dev.parent = &cam->usbdev->dev;
- i2c_set_adapdata(&cam->i2c_adapter, cam);
+ i2c_set_adapdata(&cam->i2c_adapter, &cam->v4l2_dev);
DBG(6, "Registering I2C adapter with kernel...")
static int
w9968cf_sensor_cmd(struct w9968cf_device* cam, unsigned int cmd, void* arg)
{
- struct i2c_client* c = cam->sensor_client;
- int rc = 0;
+ int rc;
- if (!c || !c->driver || !c->driver->command)
- return -EINVAL;
-
- rc = c->driver->command(c, cmd, arg);
+ rc = v4l2_subdev_call(cam->sensor_sd, core, ioctl, cmd, arg);
/* The I2C driver returns -EPERM on non-supported controls */
return (rc < 0 && rc != -EPERM) ? rc : 0;
}
goto error;
/* NOTE: Make sure width and height are a multiple of 16 */
- switch (cam->sensor_client->addr) {
+ switch (v4l2_i2c_subdev_addr(cam->sensor_sd)) {
case OV6xx0_SID:
cam->maxwidth = 352;
cam->maxheight = 288;
w9968cf_deallocate_memory(cam);
kfree(cam->control_buffer);
kfree(cam->data_buffer);
+ v4l2_device_unregister(&cam->v4l2_dev);
mutex_unlock(&w9968cf_devlist_mutex);
}
struct list_head* ptr;
u8 sc = 0; /* number of simultaneous cameras */
static unsigned short dev_nr; /* 0 - we are handling device number n */
+ static unsigned short addrs[] = {
+ OV7xx0_SID,
+ OV6xx0_SID,
+ I2C_CLIENT_END
+ };
if (le16_to_cpu(udev->descriptor.idVendor) == winbond_id_table[0].idVendor &&
le16_to_cpu(udev->descriptor.idProduct) == winbond_id_table[0].idProduct)
w9968cf_turn_on_led(cam);
w9968cf_i2c_init(cam);
+ cam->sensor_sd = v4l2_i2c_new_probed_subdev(&cam->i2c_adapter,
+ "ovcamchip", "ovcamchip", addrs);
usb_set_intfdata(intf, cam);
mutex_unlock(&cam->dev_mutex);
- if (ovmod_load)
- request_module("ovcamchip");
+ err = w9968cf_sensor_init(cam);
return 0;
fail: /* Free unused memory */
struct w9968cf_device* cam =
(struct w9968cf_device*)usb_get_intfdata(intf);
- down_write(&w9968cf_disconnect);
-
if (cam) {
+ down_write(&w9968cf_disconnect);
/* Prevent concurrent accesses to data */
mutex_lock(&cam->dev_mutex);
w9968cf_release_resources(cam);
mutex_unlock(&cam->dev_mutex);
+ up_write(&w9968cf_disconnect);
if (!cam->users) {
- v4l2_device_unregister(&cam->v4l2_dev);
kfree(cam);
}
}
-
- up_write(&w9968cf_disconnect);
}
* Default values *
****************************************************************************/
-#define W9968CF_OVMOD_LOAD 1 /* automatic 'ovcamchip' module loading */
#define W9968CF_VPPMOD_LOAD 1 /* automatic 'w9968cf-vpp' module loading */
/* Comment/uncomment the following line to enable/disable debugging messages */
/* I2C interface to kernel */
struct i2c_adapter i2c_adapter;
- struct i2c_client* sensor_client;
+ struct v4l2_subdev *sensor_sd;
/* Locks */
struct mutex dev_mutex, /* for probe, disconnect,open and close */
char command[16]; /* name of the program holding the device */
};
+static inline struct w9968cf_device *to_cam(struct v4l2_device *v4l2_dev)
+{
+ return container_of(v4l2_dev, struct w9968cf_device, v4l2_dev);
+}
+
/****************************************************************************
* Macros for debugging *
projects / platform / kernel / linux-amlogic.git / commitdiff