[ Upstream commit
6ca5cecbd1c1758666ab79446f19e0e61ed11444 ]
Add a state machine for FW boot to track the
different stages of FW boot and replace the boot_complete
field with fw_state field in struct snd_sof_dev.
This will be used to determine the actions to be performed
during system suspend.
One of the main motivations for adding this change is the
fact that errors during the top-level SOF device probe cannot
be propagated and therefore suspending the SOF device normally
during system suspend could potentially run into errors.
For example, with the current flow, if the FW boot failed
for some reason and the system suspends, the SOF device
suspend could fail because the CTX_SAVE IPC would be attempted
even though the FW never really booted successfully causing it
to time out. Another scenario that the state machine fixes
is when the runtime suspend for the SOF device fails and
the DSP is powered down nevertheless, the CTX_SAVE IPC during
system suspend would timeout because the DSP is already
powered down.
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191218002616.7652-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
#endif
}
+/*
+ * FW Boot State Transition Diagram
+ *
+ * +-----------------------------------------------------------------------+
+ * | |
+ * ------------------ ------------------ |
+ * | | | | |
+ * | BOOT_FAILED | | READY_FAILED |-------------------------+ |
+ * | | | | | |
+ * ------------------ ------------------ | |
+ * ^ ^ | |
+ * | | | |
+ * (FW Boot Timeout) (FW_READY FAIL) | |
+ * | | | |
+ * | | | |
+ * ------------------ | ------------------ | |
+ * | | | | | | |
+ * | IN_PROGRESS |---------------+------------->| COMPLETE | | |
+ * | | (FW Boot OK) (FW_READY OK) | | | |
+ * ------------------ ------------------ | |
+ * ^ | | |
+ * | | | |
+ * (FW Loading OK) (System Suspend/Runtime Suspend)
+ * | | | |
+ * | | | |
+ * ------------------ ------------------ | | |
+ * | | | |<-----+ | |
+ * | PREPARE | | NOT_STARTED |<---------------------+ |
+ * | | | |<---------------------------+
+ * ------------------ ------------------
+ * | ^ | ^
+ * | | | |
+ * | +-----------------------+ |
+ * | (DSP Probe OK) |
+ * | |
+ * | |
+ * +------------------------------------+
+ * (System Suspend/Runtime Suspend)
+ */
+
static int sof_probe_continue(struct snd_sof_dev *sdev)
{
struct snd_sof_pdata *plat_data = sdev->pdata;
return ret;
}
+ sdev->fw_state = SOF_FW_BOOT_PREPARE;
+
/* check machine info */
ret = sof_machine_check(sdev);
if (ret < 0) {
goto fw_load_err;
}
- /* boot the firmware */
+ sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS;
+
+ /*
+ * Boot the firmware. The FW boot status will be modified
+ * in snd_sof_run_firmware() depending on the outcome.
+ */
ret = snd_sof_run_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev, "error: failed to boot DSP firmware %d\n",
sdev->pdata = plat_data;
sdev->first_boot = true;
+ sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
dev_set_drvdata(dev, sdev);
/* check all mandatory ops */
/* init for booting wait */
init_waitqueue_head(&sdev->boot_wait);
- sdev->boot_complete = false;
/* prepare DMA for code loader stream */
tag = cl_stream_prepare(sdev, 0x40, stripped_firmware.size,
panic = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
HDA_ADSP_ERROR_CODE_SKL + 0x4);
- if (sdev->boot_complete) {
+ if (sdev->fw_state == SOF_FW_BOOT_COMPLETE) {
hda_dsp_get_registers(sdev, &xoops, &panic_info, stack,
HDA_DSP_STACK_DUMP_SIZE);
snd_sof_get_status(sdev, status, panic, &xoops, &panic_info,
HDA_DSP_SRAM_REG_FW_STATUS);
panic = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_SRAM_REG_FW_TRACEP);
- if (sdev->boot_complete) {
+ if (sdev->fw_state == SOF_FW_BOOT_COMPLETE) {
hda_dsp_get_registers(sdev, &xoops, &panic_info, stack,
HDA_DSP_STACK_DUMP_SIZE);
snd_sof_get_status(sdev, status, panic, &xoops, &panic_info,
break;
case SOF_IPC_FW_READY:
/* check for FW boot completion */
- if (!sdev->boot_complete) {
+ if (sdev->fw_state == SOF_FW_BOOT_IN_PROGRESS) {
err = sof_ops(sdev)->fw_ready(sdev, cmd);
- if (err < 0) {
- /*
- * this indicates a mismatch in ABI
- * between the driver and fw
- */
- dev_err(sdev->dev, "error: ABI mismatch %d\n",
- err);
- } else {
- /* firmware boot completed OK */
- sdev->boot_complete = true;
- }
+ if (err < 0)
+ sdev->fw_state = SOF_FW_BOOT_READY_FAILED;
+ else
+ sdev->fw_state = SOF_FW_BOOT_COMPLETE;
/* wake up firmware loader */
wake_up(&sdev->boot_wait);
int init_core_mask;
init_waitqueue_head(&sdev->boot_wait);
- sdev->boot_complete = false;
/* create read-only fw_version debugfs to store boot version info */
if (sdev->first_boot) {
init_core_mask = ret;
- /* now wait for the DSP to boot */
- ret = wait_event_timeout(sdev->boot_wait, sdev->boot_complete,
+ /*
+ * now wait for the DSP to boot. There are 3 possible outcomes:
+ * 1. Boot wait times out indicating FW boot failure.
+ * 2. FW boots successfully and fw_ready op succeeds.
+ * 3. FW boots but fw_ready op fails.
+ */
+ ret = wait_event_timeout(sdev->boot_wait,
+ sdev->fw_state > SOF_FW_BOOT_IN_PROGRESS,
msecs_to_jiffies(sdev->boot_timeout));
if (ret == 0) {
dev_err(sdev->dev, "error: firmware boot failure\n");
snd_sof_dsp_dbg_dump(sdev, SOF_DBG_REGS | SOF_DBG_MBOX |
SOF_DBG_TEXT | SOF_DBG_PCI);
- /* after this point FW_READY msg should be ignored */
- sdev->boot_complete = true;
+ sdev->fw_state = SOF_FW_BOOT_FAILED;
return -EIO;
}
- dev_info(sdev->dev, "firmware boot complete\n");
+ if (sdev->fw_state == SOF_FW_BOOT_COMPLETE)
+ dev_info(sdev->dev, "firmware boot complete\n");
+ else
+ return -EIO; /* FW boots but fw_ready op failed */
/* perform post fw run operations */
ret = snd_sof_dsp_post_fw_run(sdev);
return ret;
}
+ sdev->fw_state = SOF_FW_BOOT_PREPARE;
+
/* load the firmware */
ret = snd_sof_load_firmware(sdev);
if (ret < 0) {
return ret;
}
- /* boot the firmware */
+ sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS;
+
+ /*
+ * Boot the firmware. The FW boot status will be modified
+ * in snd_sof_run_firmware() depending on the outcome.
+ */
ret = snd_sof_run_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev,
if (!sof_ops(sdev)->suspend)
return 0;
+ if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
+ goto power_down;
+
/* release trace */
snd_sof_release_trace(sdev);
ret);
}
+power_down:
+
+ /* return if the DSP was not probed successfully */
+ if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
+ return 0;
+
/* power down all DSP cores */
if (runtime_suspend)
ret = snd_sof_dsp_runtime_suspend(sdev);
"error: failed to power down DSP during suspend %d\n",
ret);
+ /* reset FW state */
+ sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
+
return ret;
}
struct list_head list; /* list in sdev dai list */
};
+enum snd_sof_fw_state {
+ SOF_FW_BOOT_NOT_STARTED = 0,
+ SOF_FW_BOOT_PREPARE,
+ SOF_FW_BOOT_IN_PROGRESS,
+ SOF_FW_BOOT_FAILED,
+ SOF_FW_BOOT_READY_FAILED, /* firmware booted but fw_ready op failed */
+ SOF_FW_BOOT_COMPLETE,
+};
+
/*
* SOF Device Level.
*/
/* DSP firmware boot */
wait_queue_head_t boot_wait;
- u32 boot_complete;
+ enum snd_sof_fw_state fw_state;
u32 first_boot;
/* work queue in case the probe is implemented in two steps */