extcon: intel-cht-wc: Make charger detection co-existed with OTG host mode

Whiskey Cove Cherry Trail PMIC requires disabling OTG host mode before
of charger detection procedure. Do this by manipulationg of CHGRCTRL1
register.

Source: APCI DSDT code of Lenovo Yoga Book YB1-X91L and open-sourced
Intel's drivers.

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 5ef2152..8d20e91 100644 (file)
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -29,7 +29,15 @@
 #define CHT_WC_CHGRCTRL0_DBPOFF                BIT(6)
 #define CHT_WC_CHGRCTRL0_CHR_WDT_NOKICK        BIT(7)
 
-#define CHT_WC_CHGRCTRL1               0x5e17
+#define CHT_WC_CHGRCTRL1                       0x5e17
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_100                BIT(0)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_150                BIT(1)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_500                BIT(2)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_900                BIT(3)
+#define CHT_WC_CHGRCTRL1_FUSB_INLMT_1500       BIT(4)
+#define CHT_WC_CHGRCTRL1_FTEMP_EVENT           BIT(5)
+#define CHT_WC_CHGRCTRL1_OTGMODE               BIT(6)
+#define CHT_WC_CHGRCTRL1_DBPEN                 BIT(7)
 
 #define CHT_WC_USBSRC                  0x5e29
 #define CHT_WC_USBSRC_STS_MASK         GENMASK(1, 0)
@@ -198,6 +206,18 @@ static void cht_wc_extcon_set_5v_boost(struct cht_wc_extcon_data *ext,
                dev_err(ext->dev, "Error writing Vbus GPIO CTLO: %d\n", ret);
 }
 
+static void cht_wc_extcon_set_otgmode(struct cht_wc_extcon_data *ext,
+                                     bool enable)
+{
+       unsigned int val = enable ? CHT_WC_CHGRCTRL1_OTGMODE : 0;
+       int ret;
+
+       ret = regmap_update_bits(ext->regmap, CHT_WC_CHGRCTRL1,
+                                CHT_WC_CHGRCTRL1_OTGMODE, val);
+       if (ret)
+               dev_err(ext->dev, "Error updating CHGRCTRL1 reg: %d\n", ret);
+}
+
 /* Small helper to sync EXTCON_CHG_USB_SDP and EXTCON_USB state */
 static void cht_wc_extcon_set_state(struct cht_wc_extcon_data *ext,
                                    unsigned int cable, bool state)
@@ -222,10 +242,14 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
 
        id = cht_wc_extcon_get_id(ext, pwrsrc_sts);
        if (id == USB_ID_GND) {
+               cht_wc_extcon_set_otgmode(ext, true);
+
                /* The 5v boost causes a false VBUS / SDP detect, skip */
                goto charger_det_done;
        }
 
+       cht_wc_extcon_set_otgmode(ext, false);
+
        /* Plugged into a host/charger or not connected? */
        if (!(pwrsrc_sts & CHT_WC_PWRSRC_VBUS)) {
                /* Route D+ and D- to PMIC for future charger detection */