ARM: dts: qcom: add 8devices Jalapeno

8devices Jalapeno is a dual-band SoM, based on Qualcomm
IPQ4018 + QCA8072 platform.

Specification:
QCA IPQ4018, Quad core ARM v7 Cortex A7 717MHz
256 MB of DDR3 RAM
8 MB of SPI NOR flash
128 MB of Winbond SPI NAND flash
WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
ETH: Qualcomm Atheros QCA8072 Gigabit Switch (1 x LAN, 1 x WAN)

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Link: https://lore.kernel.org/r/20200909195640.3127341-3-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 13a7cee..31a4451 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -912,6 +912,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
        qcom-apq8074-dragonboard.dtb \
        qcom-apq8084-ifc6540.dtb \
        qcom-apq8084-mtp.dtb \
+       qcom-ipq4018-jalapeno.dtb \
        qcom-ipq4019-ap.dk01.1-c1.dtb \
        qcom-ipq4019-ap.dk04.1-c1.dtb \
        qcom-ipq4019-ap.dk04.1-c3.dtb \

diff --git a/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
new file mode 100644 (file)
index 0000000..3944126
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "8devices Jalapeno";
+       compatible = "8dev,jalapeno";
+};
+
+&tlmm {
+       mdio_pins: mdio_pinmux {
+               pinmux_1 {
+                       pins = "gpio53";
+                       function = "mdio";
+               };
+
+               pinmux_2 {
+                       pins = "gpio52";
+                       function = "mdc";
+               };
+
+               pinconf {
+                       pins = "gpio52", "gpio53";
+                       bias-pull-up;
+               };
+       };
+
+       serial_pins: serial_pinmux {
+               mux {
+                       pins = "gpio60", "gpio61";
+                       function = "blsp_uart0";
+                       bias-disable;
+               };
+       };
+
+       spi_0_pins: spi_0_pinmux {
+               pin {
+                       function = "blsp_spi0";
+                       pins = "gpio55", "gpio56", "gpio57";
+                       drive-strength = <2>;
+                       bias-disable;
+               };
+
+               pin_cs {
+                       function = "gpio";
+                       pins = "gpio54", "gpio59";
+                       drive-strength = <2>;
+                       bias-disable;
+                       output-high;
+               };
+       };
+};
+
+&watchdog {
+       status = "okay";
+};
+
+&prng {
+       status = "okay";
+};
+
+&blsp_dma {
+       status = "okay";
+};
+
+&blsp1_spi1 {
+       status = "okay";
+
+       pinctrl-0 = <&spi_0_pins>;
+       pinctrl-names = "default";
+       cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
+
+       flash@0 {
+               status = "okay";
+
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <24000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "SBL1";
+                               reg = <0x00000000 0x00040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "MIBIB";
+                               reg = <0x00040000 0x00020000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "QSEE";
+                               reg = <0x00060000 0x00060000>;
+                               read-only;
+                       };
+
+                       partition@c0000 {
+                               label = "CDT";
+                               reg = <0x000c0000 0x00010000>;
+                               read-only;
+                       };
+
+                       partition@d0000 {
+                               label = "DDRPARAMS";
+                               reg = <0x000d0000 0x00010000>;
+                               read-only;
+                       };
+
+                       partition@e0000 {
+                               label = "u-boot-env";
+                               reg = <0x000e0000 0x00010000>;
+                       };
+
+                       partition@f0000 {
+                               label = "u-boot";
+                               reg = <0x000f0000 0x00080000>;
+                               read-only;
+                       };
+
+                       partition@170000 {
+                               label = "ART";
+                               reg = <0x00170000 0x00010000>;
+                               read-only;
+                       };
+               };
+       };
+
+       spi-nand@1 {
+               status = "okay";
+
+               compatible = "spi-nand";
+               reg = <1>;
+               spi-max-frequency = <24000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "ubi1";
+                               reg = <0x00000000 0x04000000>;
+                       };
+
+                       partition@4000000 {
+                               label = "ubi2";
+                               reg = <0x04000000 0x04000000>;
+                       };
+               };
+       };
+};
+
+&blsp1_uart1 {
+       status = "okay";
+
+       pinctrl-0 = <&serial_pins>;
+       pinctrl-names = "default";
+};
+
+&cryptobam {
+       status = "okay";
+};
+
+&crypto {
+       status = "okay";
+};
+
+&mdio {
+       status = "okay";
+
+       pinctrl-0 = <&mdio_pins>;
+       pinctrl-names = "default";
+};
+
+&wifi0 {
+       status = "okay";
+
+       qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+};
+
+&wifi1 {
+       status = "okay";
+
+       qcom,ath10k-calibration-variant = "8devices-Jalapeno";
+};
+
+&usb3_ss_phy {
+       status = "okay";
+};
+
+&usb3_hs_phy {
+       status = "okay";
+};
+
+&usb3 {
+       status = "okay";
+};
+
+&usb2_hs_phy {
+       status = "okay";
+};
+
+&usb2 {
+       status = "okay";
+};