PATA host controller driver for ep93xx
authorRafal Prylowski <prylowski@metasoft.pl>
Thu, 12 Apr 2012 12:13:16 +0000 (14:13 +0200)
committerJeff Garzik <jgarzik@redhat.com>
Tue, 22 May 2012 20:02:34 +0000 (16:02 -0400)
Add PATA host controller driver for ep93xx.

Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl>
Cc: Joao Ramos <joao.ramos@inov.pt>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
drivers/ata/Kconfig
drivers/ata/Makefile
drivers/ata/pata_ep93xx.c [new file with mode: 0644]

index 6bdedd7..2be8ef1 100644 (file)
@@ -416,6 +416,15 @@ config PATA_EFAR
 
          If unsure, say N.
 
+config PATA_EP93XX
+       tristate "Cirrus Logic EP93xx PATA support"
+       depends on ARCH_EP93XX
+       help
+         This option enables support for the PATA controller in
+         the Cirrus Logic EP9312 and EP9315 ARM CPU.
+
+         If unsure, say N.
+
 config PATA_HPT366
        tristate "HPT 366/368 PATA support"
        depends on PCI
index 6ece5b7..a454a13 100644 (file)
@@ -43,6 +43,7 @@ obj-$(CONFIG_PATA_CS5535)     += pata_cs5535.o
 obj-$(CONFIG_PATA_CS5536)      += pata_cs5536.o
 obj-$(CONFIG_PATA_CYPRESS)     += pata_cypress.o
 obj-$(CONFIG_PATA_EFAR)                += pata_efar.o
+obj-$(CONFIG_PATA_EP93XX)      += pata_ep93xx.o
 obj-$(CONFIG_PATA_HPT366)      += pata_hpt366.o
 obj-$(CONFIG_PATA_HPT37X)      += pata_hpt37x.o
 obj-$(CONFIG_PATA_HPT3X2N)     += pata_hpt3x2n.o
diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
new file mode 100644 (file)
index 0000000..6ef2e37
--- /dev/null
@@ -0,0 +1,1044 @@
+/*
+ * EP93XX PATA controller driver.
+ *
+ * Copyright (c) 2012, Metasoft s.c.
+ *     Rafal Prylowski <prylowski@metasoft.pl>
+ *
+ * Based on pata_scc.c, pata_icside.c and on earlier version of EP93XX
+ * PATA driver by Lennert Buytenhek and Alessandro Zummo.
+ * Read/Write timings, resource management and other improvements
+ * from driver by Joao Ramos and Bartlomiej Zolnierkiewicz.
+ * DMA engine support based on spi-ep93xx.c by Mika Westerberg.
+ *
+ * Original copyrights:
+ *
+ * Support for Cirrus Logic's EP93xx (EP9312, EP9315) CPUs
+ * PATA host controller driver.
+ *
+ * Copyright (c) 2009, Bartlomiej Zolnierkiewicz
+ *
+ * Heavily based on the ep93xx-ide.c driver:
+ *
+ * Copyright (c) 2009, Joao Ramos <joao.ramos@inov.pt>
+ *                   INESC Inovacao (INOV)
+ *
+ * EP93XX PATA controller driver.
+ * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * An ATA driver for the Cirrus Logic EP93xx PATA controller.
+ *
+ * Based on an earlier version by Alessandro Zummo, which is:
+ *   Copyright (C) 2006 Tower Technologies
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/ktime.h>
+
+#include <mach/dma.h>
+#include <mach/platform.h>
+
+#define DRV_NAME       "ep93xx-ide"
+#define DRV_VERSION    "1.0"
+
+enum {
+       /* IDE Control Register */
+       IDECTRL                         = 0x00,
+       IDECTRL_CS0N                    = (1 << 0),
+       IDECTRL_CS1N                    = (1 << 1),
+       IDECTRL_DIORN                   = (1 << 5),
+       IDECTRL_DIOWN                   = (1 << 6),
+       IDECTRL_INTRQ                   = (1 << 9),
+       IDECTRL_IORDY                   = (1 << 10),
+       /*
+        * the device IDE register to be accessed is selected through
+        * IDECTRL register's specific bitfields 'DA', 'CS1N' and 'CS0N':
+        *   b4   b3   b2    b1     b0
+        *   A2   A1   A0   CS1N   CS0N
+        * the values filled in this structure allows the value to be directly
+        * ORed to the IDECTRL register, hence giving directly the A[2:0] and
+        * CS1N/CS0N values for each IDE register.
+        * The values correspond to the transformation:
+        *   ((real IDE address) << 2) | CS1N value << 1 | CS0N value
+        */
+       IDECTRL_ADDR_CMD                = 0 + 2, /* CS1 */
+       IDECTRL_ADDR_DATA               = (ATA_REG_DATA << 2) + 2,
+       IDECTRL_ADDR_ERROR              = (ATA_REG_ERR << 2) + 2,
+       IDECTRL_ADDR_FEATURE            = (ATA_REG_FEATURE << 2) + 2,
+       IDECTRL_ADDR_NSECT              = (ATA_REG_NSECT << 2) + 2,
+       IDECTRL_ADDR_LBAL               = (ATA_REG_LBAL << 2) + 2,
+       IDECTRL_ADDR_LBAM               = (ATA_REG_LBAM << 2) + 2,
+       IDECTRL_ADDR_LBAH               = (ATA_REG_LBAH << 2) + 2,
+       IDECTRL_ADDR_DEVICE             = (ATA_REG_DEVICE << 2) + 2,
+       IDECTRL_ADDR_STATUS             = (ATA_REG_STATUS << 2) + 2,
+       IDECTRL_ADDR_COMMAND            = (ATA_REG_CMD << 2) + 2,
+       IDECTRL_ADDR_ALTSTATUS          = (0x06 << 2) + 1, /* CS0 */
+       IDECTRL_ADDR_CTL                = (0x06 << 2) + 1, /* CS0 */
+
+       /* IDE Configuration Register */
+       IDECFG                          = 0x04,
+       IDECFG_IDEEN                    = (1 << 0),
+       IDECFG_PIO                      = (1 << 1),
+       IDECFG_MDMA                     = (1 << 2),
+       IDECFG_UDMA                     = (1 << 3),
+       IDECFG_MODE_SHIFT               = 4,
+       IDECFG_MODE_MASK                = (0xf << 4),
+       IDECFG_WST_SHIFT                = 8,
+       IDECFG_WST_MASK                 = (0x3 << 8),
+
+       /* MDMA Operation Register */
+       IDEMDMAOP                       = 0x08,
+
+       /* UDMA Operation Register */
+       IDEUDMAOP                       = 0x0c,
+       IDEUDMAOP_UEN                   = (1 << 0),
+       IDEUDMAOP_RWOP                  = (1 << 1),
+
+       /* PIO/MDMA/UDMA Data Registers */
+       IDEDATAOUT                      = 0x10,
+       IDEDATAIN                       = 0x14,
+       IDEMDMADATAOUT                  = 0x18,
+       IDEMDMADATAIN                   = 0x1c,
+       IDEUDMADATAOUT                  = 0x20,
+       IDEUDMADATAIN                   = 0x24,
+
+       /* UDMA Status Register */
+       IDEUDMASTS                      = 0x28,
+       IDEUDMASTS_DMAIDE               = (1 << 16),
+       IDEUDMASTS_INTIDE               = (1 << 17),
+       IDEUDMASTS_SBUSY                = (1 << 18),
+       IDEUDMASTS_NDO                  = (1 << 24),
+       IDEUDMASTS_NDI                  = (1 << 25),
+       IDEUDMASTS_N4X                  = (1 << 26),
+
+       /* UDMA Debug Status Register */
+       IDEUDMADEBUG                    = 0x2c,
+};
+
+struct ep93xx_pata_data {
+       const struct platform_device *pdev;
+       void __iomem *ide_base;
+       struct ata_timing t;
+       bool iordy;
+
+       unsigned long udma_in_phys;
+       unsigned long udma_out_phys;
+
+       struct dma_chan *dma_rx_channel;
+       struct ep93xx_dma_data dma_rx_data;
+       struct dma_chan *dma_tx_channel;
+       struct ep93xx_dma_data dma_tx_data;
+};
+
+static void ep93xx_pata_clear_regs(void __iomem *base)
+{
+       writel(IDECTRL_CS0N | IDECTRL_CS1N | IDECTRL_DIORN |
+               IDECTRL_DIOWN, base + IDECTRL);
+
+       writel(0, base + IDECFG);
+       writel(0, base + IDEMDMAOP);
+       writel(0, base + IDEUDMAOP);
+       writel(0, base + IDEDATAOUT);
+       writel(0, base + IDEDATAIN);
+       writel(0, base + IDEMDMADATAOUT);
+       writel(0, base + IDEMDMADATAIN);
+       writel(0, base + IDEUDMADATAOUT);
+       writel(0, base + IDEUDMADATAIN);
+       writel(0, base + IDEUDMADEBUG);
+}
+
+static bool ep93xx_pata_check_iordy(void __iomem *base)
+{
+       return !!(readl(base + IDECTRL) & IDECTRL_IORDY);
+}
+
+/*
+ * According to EP93xx User's Guide, WST field of IDECFG specifies number
+ * of HCLK cycles to hold the data bus after a PIO write operation.
+ * It should be programmed to guarantee following delays:
+ *
+ * PIO Mode   [ns]
+ * 0          30
+ * 1          20
+ * 2          15
+ * 3          10
+ * 4          5
+ *
+ * Maximum possible value for HCLK is 100MHz.
+ */
+static int ep93xx_pata_get_wst(int pio_mode)
+{
+       int val;
+
+       if (pio_mode == 0)
+               val = 3;
+       else if (pio_mode < 3)
+               val = 2;
+       else
+               val = 1;
+
+       return val << IDECFG_WST_SHIFT;
+}
+
+static void ep93xx_pata_enable_pio(void __iomem *base, int pio_mode)
+{
+       writel(IDECFG_IDEEN | IDECFG_PIO |
+               ep93xx_pata_get_wst(pio_mode) |
+               (pio_mode << IDECFG_MODE_SHIFT), base + IDECFG);
+}
+
+/*
+ * Based on delay loop found in mach-pxa/mp900.c.
+ *
+ * Single iteration should take 5 cpu cycles. This is 25ns assuming the
+ * fastest ep93xx cpu speed (200MHz) and is better optimized for PIO4 timings
+ * than eg. 20ns.
+ */
+static void ep93xx_pata_delay(unsigned long count)
+{
+       __asm__ volatile (
+               "0:\n"
+               "mov r0, r0\n"
+               "subs %0, %1, #1\n"
+               "bge 0b\n"
+               : "=r" (count)
+               : "0" (count)
+       );
+}
+
+static unsigned long ep93xx_pata_wait_for_iordy(void __iomem *base,
+                                               unsigned long t2)
+{
+       /*
+        * According to ATA specification, IORDY pin can be first sampled
+        * tA = 35ns after activation of DIOR-/DIOW-. Maximum IORDY pulse
+        * width is tB = 1250ns.
+        *
+        * We are already t2 delay loop iterations after activation of
+        * DIOR-/DIOW-, so we set timeout to (1250 + 35) / 25 - t2 additional
+        * delay loop iterations.
+        */
+       unsigned long start = (1250 + 35) / 25 - t2;
+       unsigned long counter = start;
+
+       while (!ep93xx_pata_check_iordy(base) && counter--)
+               ep93xx_pata_delay(1);
+       return start - counter;
+}
+
+/* common part at start of ep93xx_pata_read/write() */
+static void ep93xx_pata_rw_begin(void __iomem *base, unsigned long addr,
+                                unsigned long t1)
+{
+       writel(IDECTRL_DIOWN | IDECTRL_DIORN | addr, base + IDECTRL);
+       ep93xx_pata_delay(t1);
+}
+
+/* common part at end of ep93xx_pata_read/write() */
+static void ep93xx_pata_rw_end(void __iomem *base, unsigned long addr,
+                              bool iordy, unsigned long t0, unsigned long t2,
+                              unsigned long t2i)
+{
+       ep93xx_pata_delay(t2);
+       /* lengthen t2 if needed */
+       if (iordy)
+               t2 += ep93xx_pata_wait_for_iordy(base, t2);
+       writel(IDECTRL_DIOWN | IDECTRL_DIORN | addr, base + IDECTRL);
+       if (t0 > t2 && t0 - t2 > t2i)
+               ep93xx_pata_delay(t0 - t2);
+       else
+               ep93xx_pata_delay(t2i);
+}
+
+static u16 ep93xx_pata_read(struct ep93xx_pata_data *drv_data,
+                           unsigned long addr,
+                           bool reg)
+{
+       void __iomem *base = drv_data->ide_base;
+       const struct ata_timing *t = &drv_data->t;
+       unsigned long t0 = reg ? t->cyc8b : t->cycle;
+       unsigned long t2 = reg ? t->act8b : t->active;
+       unsigned long t2i = reg ? t->rec8b : t->recover;
+
+       ep93xx_pata_rw_begin(base, addr, t->setup);
+       writel(IDECTRL_DIOWN | addr, base + IDECTRL);
+       /*
+        * The IDEDATAIN register is loaded from the DD pins at the positive
+        * edge of the DIORN signal. (EP93xx UG p27-14)
+        */
+       ep93xx_pata_rw_end(base, addr, drv_data->iordy, t0, t2, t2i);
+       return readl(base + IDEDATAIN);
+}
+
+/* IDE register read */
+static u16 ep93xx_pata_read_reg(struct ep93xx_pata_data *drv_data,
+                               unsigned long addr)
+{
+       return ep93xx_pata_read(drv_data, addr, true);
+}
+
+/* PIO data read */
+static u16 ep93xx_pata_read_data(struct ep93xx_pata_data *drv_data,
+                                unsigned long addr)
+{
+       return ep93xx_pata_read(drv_data, addr, false);
+}
+
+static void ep93xx_pata_write(struct ep93xx_pata_data *drv_data,
+                             u16 value, unsigned long addr,
+                             bool reg)
+{
+       void __iomem *base = drv_data->ide_base;
+       const struct ata_timing *t = &drv_data->t;
+       unsigned long t0 = reg ? t->cyc8b : t->cycle;
+       unsigned long t2 = reg ? t->act8b : t->active;
+       unsigned long t2i = reg ? t->rec8b : t->recover;
+
+       ep93xx_pata_rw_begin(base, addr, t->setup);
+       /*
+        * Value from IDEDATAOUT register is driven onto the DD pins when
+        * DIOWN is low. (EP93xx UG p27-13)
+        */
+       writel(value, base + IDEDATAOUT);
+       writel(IDECTRL_DIORN | addr, base + IDECTRL);
+       ep93xx_pata_rw_end(base, addr, drv_data->iordy, t0, t2, t2i);
+}
+
+/* IDE register write */
+static void ep93xx_pata_write_reg(struct ep93xx_pata_data *drv_data,
+                                 u16 value, unsigned long addr)
+{
+       ep93xx_pata_write(drv_data, value, addr, true);
+}
+
+/* PIO data write */
+static void ep93xx_pata_write_data(struct ep93xx_pata_data *drv_data,
+                                  u16 value, unsigned long addr)
+{
+       ep93xx_pata_write(drv_data, value, addr, false);
+}
+
+static void ep93xx_pata_set_piomode(struct ata_port *ap,
+                                   struct ata_device *adev)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+       struct ata_device *pair = ata_dev_pair(adev);
+       /*
+        * Calculate timings for the delay loop, assuming ep93xx cpu speed
+        * is 200MHz (maximum possible for ep93xx). If actual cpu speed is
+        * slower, we will wait a bit longer in each delay.
+        * Additional division of cpu speed by 5, because single iteration
+        * of our delay loop takes 5 cpu cycles (25ns).
+        */
+       unsigned long T = 1000000 / (200 / 5);
+
+       ata_timing_compute(adev, adev->pio_mode, &drv_data->t, T, 0);
+       if (pair && pair->pio_mode) {
+               struct ata_timing t;
+               ata_timing_compute(pair, pair->pio_mode, &t, T, 0);
+               ata_timing_merge(&t, &drv_data->t, &drv_data->t,
+                       ATA_TIMING_SETUP | ATA_TIMING_8BIT);
+       }
+       drv_data->iordy = ata_pio_need_iordy(adev);
+
+       ep93xx_pata_enable_pio(drv_data->ide_base,
+                              adev->pio_mode - XFER_PIO_0);
+}
+
+/* Note: original code is ata_sff_check_status */
+static u8 ep93xx_pata_check_status(struct ata_port *ap)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+
+       return ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_STATUS);
+}
+
+static u8 ep93xx_pata_check_altstatus(struct ata_port *ap)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+
+       return ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_ALTSTATUS);
+}
+
+/* Note: original code is ata_sff_tf_load */
+static void ep93xx_pata_tf_load(struct ata_port *ap,
+                               const struct ata_taskfile *tf)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+       unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+       if (tf->ctl != ap->last_ctl) {
+               ep93xx_pata_write_reg(drv_data, tf->ctl, IDECTRL_ADDR_CTL);
+               ap->last_ctl = tf->ctl;
+               ata_wait_idle(ap);
+       }
+
+       if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+               ep93xx_pata_write_reg(drv_data, tf->hob_feature,
+                       IDECTRL_ADDR_FEATURE);
+               ep93xx_pata_write_reg(drv_data, tf->hob_nsect,
+                       IDECTRL_ADDR_NSECT);
+               ep93xx_pata_write_reg(drv_data, tf->hob_lbal,
+                       IDECTRL_ADDR_LBAL);
+               ep93xx_pata_write_reg(drv_data, tf->hob_lbam,
+                       IDECTRL_ADDR_LBAM);
+               ep93xx_pata_write_reg(drv_data, tf->hob_lbah,
+                       IDECTRL_ADDR_LBAH);
+       }
+
+       if (is_addr) {
+               ep93xx_pata_write_reg(drv_data, tf->feature,
+                       IDECTRL_ADDR_FEATURE);
+               ep93xx_pata_write_reg(drv_data, tf->nsect, IDECTRL_ADDR_NSECT);
+               ep93xx_pata_write_reg(drv_data, tf->lbal, IDECTRL_ADDR_LBAL);
+               ep93xx_pata_write_reg(drv_data, tf->lbam, IDECTRL_ADDR_LBAM);
+               ep93xx_pata_write_reg(drv_data, tf->lbah, IDECTRL_ADDR_LBAH);
+       }
+
+       if (tf->flags & ATA_TFLAG_DEVICE)
+               ep93xx_pata_write_reg(drv_data, tf->device,
+                       IDECTRL_ADDR_DEVICE);
+
+       ata_wait_idle(ap);
+}
+
+/* Note: original code is ata_sff_tf_read */
+static void ep93xx_pata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+
+       tf->command = ep93xx_pata_check_status(ap);
+       tf->feature = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_FEATURE);
+       tf->nsect = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_NSECT);
+       tf->lbal = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAL);
+       tf->lbam = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAM);
+       tf->lbah = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAH);
+       tf->device = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_DEVICE);
+
+       if (tf->flags & ATA_TFLAG_LBA48) {
+               ep93xx_pata_write_reg(drv_data, tf->ctl | ATA_HOB,
+                       IDECTRL_ADDR_CTL);
+               tf->hob_feature = ep93xx_pata_read_reg(drv_data,
+                       IDECTRL_ADDR_FEATURE);
+               tf->hob_nsect = ep93xx_pata_read_reg(drv_data,
+                       IDECTRL_ADDR_NSECT);
+               tf->hob_lbal = ep93xx_pata_read_reg(drv_data,
+                       IDECTRL_ADDR_LBAL);
+               tf->hob_lbam = ep93xx_pata_read_reg(drv_data,
+                       IDECTRL_ADDR_LBAM);
+               tf->hob_lbah = ep93xx_pata_read_reg(drv_data,
+                       IDECTRL_ADDR_LBAH);
+               ep93xx_pata_write_reg(drv_data, tf->ctl, IDECTRL_ADDR_CTL);
+               ap->last_ctl = tf->ctl;
+       }
+}
+
+/* Note: original code is ata_sff_exec_command */
+static void ep93xx_pata_exec_command(struct ata_port *ap,
+                                    const struct ata_taskfile *tf)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+
+       ep93xx_pata_write_reg(drv_data, tf->command,
+                         IDECTRL_ADDR_COMMAND);
+       ata_sff_pause(ap);
+}
+
+/* Note: original code is ata_sff_dev_select */
+static void ep93xx_pata_dev_select(struct ata_port *ap, unsigned int device)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+       u8 tmp = ATA_DEVICE_OBS;
+
+       if (device != 0)
+               tmp |= ATA_DEV1;
+
+       ep93xx_pata_write_reg(drv_data, tmp, IDECTRL_ADDR_DEVICE);
+       ata_sff_pause(ap);      /* needed; also flushes, for mmio */
+}
+
+/* Note: original code is ata_sff_set_devctl */
+static void ep93xx_pata_set_devctl(struct ata_port *ap, u8 ctl)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+
+       ep93xx_pata_write_reg(drv_data, ctl, IDECTRL_ADDR_CTL);
+}
+
+/* Note: original code is ata_sff_data_xfer */
+static unsigned int ep93xx_pata_data_xfer(struct ata_device *adev,
+                                         unsigned char *buf,
+                                         unsigned int buflen, int rw)
+{
+       struct ata_port *ap = adev->link->ap;
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+       u16 *data = (u16 *)buf;
+       unsigned int words = buflen >> 1;
+
+       /* Transfer multiple of 2 bytes */
+       while (words--)
+               if (rw == READ)
+                       *data++ = cpu_to_le16(
+                               ep93xx_pata_read_data(
+                                       drv_data, IDECTRL_ADDR_DATA));
+               else
+                       ep93xx_pata_write_data(drv_data, le16_to_cpu(*data++),
+                               IDECTRL_ADDR_DATA);
+
+       /* Transfer trailing 1 byte, if any. */
+       if (unlikely(buflen & 0x01)) {
+               unsigned char pad[2] = { };
+
+               buf += buflen - 1;
+
+               if (rw == READ) {
+                       *pad = cpu_to_le16(
+                               ep93xx_pata_read_data(
+                                       drv_data, IDECTRL_ADDR_DATA));
+                       *buf = pad[0];
+               } else {
+                       pad[0] = *buf;
+                       ep93xx_pata_write_data(drv_data, le16_to_cpu(*pad),
+                                         IDECTRL_ADDR_DATA);
+               }
+               words++;
+       }
+
+       return words << 1;
+}
+
+/* Note: original code is ata_devchk */
+static bool ep93xx_pata_device_is_present(struct ata_port *ap,
+                                         unsigned int device)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+       u8 nsect, lbal;
+
+       ap->ops->sff_dev_select(ap, device);
+
+       ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_NSECT);
+       ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_LBAL);
+
+       ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_NSECT);
+       ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_LBAL);
+
+       ep93xx_pata_write_reg(drv_data, 0x55, IDECTRL_ADDR_NSECT);
+       ep93xx_pata_write_reg(drv_data, 0xaa, IDECTRL_ADDR_LBAL);
+
+       nsect = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_NSECT);
+       lbal = ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_LBAL);
+
+       if ((nsect == 0x55) && (lbal == 0xaa))
+               return true;
+
+       return false;
+}
+
+/* Note: original code is ata_sff_wait_after_reset */
+static int ep93xx_pata_wait_after_reset(struct ata_link *link,
+                                       unsigned int devmask,
+                                       unsigned long deadline)
+{
+       struct ata_port *ap = link->ap;
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+       unsigned int dev0 = devmask & (1 << 0);
+       unsigned int dev1 = devmask & (1 << 1);
+       int rc, ret = 0;
+
+       ata_msleep(ap, ATA_WAIT_AFTER_RESET);
+
+       /* always check readiness of the master device */
+       rc = ata_sff_wait_ready(link, deadline);
+       /*
+        * -ENODEV means the odd clown forgot the D7 pulldown resistor
+        * and TF status is 0xff, bail out on it too.
+        */
+       if (rc)
+               return rc;
+
+       /*
+        * if device 1 was found in ata_devchk, wait for register
+        * access briefly, then wait for BSY to clear.
+        */
+       if (dev1) {
+               int i;
+
+               ap->ops->sff_dev_select(ap, 1);
+
+               /*
+                * Wait for register access.  Some ATAPI devices fail
+                * to set nsect/lbal after reset, so don't waste too
+                * much time on it.  We're gonna wait for !BSY anyway.
+                */
+               for (i = 0; i < 2; i++) {
+                       u8 nsect, lbal;
+
+                       nsect = ep93xx_pata_read_reg(drv_data,
+                               IDECTRL_ADDR_NSECT);
+                       lbal = ep93xx_pata_read_reg(drv_data,
+                               IDECTRL_ADDR_LBAL);
+                       if (nsect == 1 && lbal == 1)
+                               break;
+                       msleep(50);     /* give drive a breather */
+               }
+
+               rc = ata_sff_wait_ready(link, deadline);
+               if (rc) {
+                       if (rc != -ENODEV)
+                               return rc;
+                       ret = rc;
+               }
+       }
+       /* is all this really necessary? */
+       ap->ops->sff_dev_select(ap, 0);
+       if (dev1)
+               ap->ops->sff_dev_select(ap, 1);
+       if (dev0)
+               ap->ops->sff_dev_select(ap, 0);
+
+       return ret;
+}
+
+/* Note: original code is ata_bus_softreset */
+static int ep93xx_pata_bus_softreset(struct ata_port *ap, unsigned int devmask,
+                                    unsigned long deadline)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+
+       ep93xx_pata_write_reg(drv_data, ap->ctl, IDECTRL_ADDR_CTL);
+       udelay(20);             /* FIXME: flush */
+       ep93xx_pata_write_reg(drv_data, ap->ctl | ATA_SRST, IDECTRL_ADDR_CTL);
+       udelay(20);             /* FIXME: flush */
+       ep93xx_pata_write_reg(drv_data, ap->ctl, IDECTRL_ADDR_CTL);
+       ap->last_ctl = ap->ctl;
+
+       return ep93xx_pata_wait_after_reset(&ap->link, devmask, deadline);
+}
+
+static void ep93xx_pata_release_dma(struct ep93xx_pata_data *drv_data)
+{
+       if (drv_data->dma_rx_channel) {
+               dma_release_channel(drv_data->dma_rx_channel);
+               drv_data->dma_rx_channel = NULL;
+       }
+       if (drv_data->dma_tx_channel) {
+               dma_release_channel(drv_data->dma_tx_channel);
+               drv_data->dma_tx_channel = NULL;
+       }
+}
+
+static bool ep93xx_pata_dma_filter(struct dma_chan *chan, void *filter_param)
+{
+       if (ep93xx_dma_chan_is_m2p(chan))
+               return false;
+
+       chan->private = filter_param;
+       return true;
+}
+
+static void ep93xx_pata_dma_init(struct ep93xx_pata_data *drv_data)
+{
+       const struct platform_device *pdev = drv_data->pdev;
+       dma_cap_mask_t mask;
+       struct dma_slave_config conf;
+
+       dma_cap_zero(mask);
+       dma_cap_set(DMA_SLAVE, mask);
+
+       /*
+        * Request two channels for IDE. Another possibility would be
+        * to request only one channel, and reprogram it's direction at
+        * start of new transfer.
+        */
+       drv_data->dma_rx_data.port = EP93XX_DMA_IDE;
+       drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
+       drv_data->dma_rx_data.name = "ep93xx-pata-rx";
+       drv_data->dma_rx_channel = dma_request_channel(mask,
+               ep93xx_pata_dma_filter, &drv_data->dma_rx_data);
+       if (!drv_data->dma_rx_channel)
+               return;
+
+       drv_data->dma_tx_data.port = EP93XX_DMA_IDE;
+       drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
+       drv_data->dma_tx_data.name = "ep93xx-pata-tx";
+       drv_data->dma_tx_channel = dma_request_channel(mask,
+               ep93xx_pata_dma_filter, &drv_data->dma_tx_data);
+       if (!drv_data->dma_tx_channel) {
+               dma_release_channel(drv_data->dma_rx_channel);
+               return;
+       }
+
+       /* Configure receive channel direction and source address */
+       memset(&conf, 0, sizeof(conf));
+       conf.direction = DMA_FROM_DEVICE;
+       conf.src_addr = drv_data->udma_in_phys;
+       conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+       if (dmaengine_slave_config(drv_data->dma_rx_channel, &conf)) {
+               dev_err(&pdev->dev, "failed to configure rx dma channel\n");
+               ep93xx_pata_release_dma(drv_data);
+               return;
+       }
+
+       /* Configure transmit channel direction and destination address */
+       memset(&conf, 0, sizeof(conf));
+       conf.direction = DMA_TO_DEVICE;
+       conf.dst_addr = drv_data->udma_out_phys;
+       conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+       if (dmaengine_slave_config(drv_data->dma_tx_channel, &conf)) {
+               dev_err(&pdev->dev, "failed to configure tx dma channel\n");
+               ep93xx_pata_release_dma(drv_data);
+       }
+}
+
+static void ep93xx_pata_dma_start(struct ata_queued_cmd *qc)
+{
+       struct dma_async_tx_descriptor *txd;
+       struct ep93xx_pata_data *drv_data = qc->ap->host->private_data;
+       void __iomem *base = drv_data->ide_base;
+       struct ata_device *adev = qc->dev;
+       u32 v = qc->dma_dir == DMA_TO_DEVICE ? IDEUDMAOP_RWOP : 0;
+       struct dma_chan *channel = qc->dma_dir == DMA_TO_DEVICE
+               ? drv_data->dma_tx_channel : drv_data->dma_rx_channel;
+
+       txd = channel->device->device_prep_slave_sg(channel, qc->sg,
+                qc->n_elem, qc->dma_dir, DMA_CTRL_ACK, NULL);
+       if (!txd) {
+               dev_err(qc->ap->dev, "failed to prepare slave for sg dma\n");
+               return;
+       }
+       txd->callback = NULL;
+       txd->callback_param = NULL;
+
+       if (dmaengine_submit(txd) < 0) {
+               dev_err(qc->ap->dev, "failed to submit dma transfer\n");
+               return;
+       }
+       dma_async_issue_pending(channel);
+
+       /*
+        * When enabling UDMA operation, IDEUDMAOP register needs to be
+        * programmed in three step sequence:
+        * 1) set or clear the RWOP bit,
+        * 2) perform dummy read of the register,
+        * 3) set the UEN bit.
+        */
+       writel(v, base + IDEUDMAOP);
+       readl(base + IDEUDMAOP);
+       writel(v | IDEUDMAOP_UEN, base + IDEUDMAOP);
+
+       writel(IDECFG_IDEEN | IDECFG_UDMA |
+               ((adev->xfer_mode - XFER_UDMA_0) << IDECFG_MODE_SHIFT),
+               base + IDECFG);
+}
+
+static void ep93xx_pata_dma_stop(struct ata_queued_cmd *qc)
+{
+       struct ep93xx_pata_data *drv_data = qc->ap->host->private_data;
+       void __iomem *base = drv_data->ide_base;
+
+       /* terminate all dma transfers, if not yet finished */
+       dmaengine_terminate_all(drv_data->dma_rx_channel);
+       dmaengine_terminate_all(drv_data->dma_tx_channel);
+
+       /*
+        * To properly stop IDE-DMA, IDEUDMAOP register must to be cleared
+        * and IDECTRL register must be set to default value.
+        */
+       writel(0, base + IDEUDMAOP);
+       writel(readl(base + IDECTRL) | IDECTRL_DIOWN | IDECTRL_DIORN |
+               IDECTRL_CS0N | IDECTRL_CS1N, base + IDECTRL);
+
+       ep93xx_pata_enable_pio(drv_data->ide_base,
+               qc->dev->pio_mode - XFER_PIO_0);
+
+       ata_sff_dma_pause(qc->ap);
+}
+
+static void ep93xx_pata_dma_setup(struct ata_queued_cmd *qc)
+{
+       qc->ap->ops->sff_exec_command(qc->ap, &qc->tf);
+}
+
+static u8 ep93xx_pata_dma_status(struct ata_port *ap)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+       u32 val = readl(drv_data->ide_base + IDEUDMASTS);
+
+       /*
+        * UDMA Status Register bits:
+        *
+        * DMAIDE - DMA request signal from UDMA state machine,
+        * INTIDE - INT line generated by UDMA because of errors in the
+        *          state machine,
+        * SBUSY - UDMA state machine busy, not in idle state,
+        * NDO   - error for data-out not completed,
+        * NDI   - error for data-in not completed,
+        * N4X   - error for data transferred not multiplies of four
+        *         32-bit words.
+        * (EP93xx UG p27-17)
+        */
+       if (val & IDEUDMASTS_NDO || val & IDEUDMASTS_NDI ||
+           val & IDEUDMASTS_N4X || val & IDEUDMASTS_INTIDE)
+               return ATA_DMA_ERR;
+
+       /* read INTRQ (INT[3]) pin input state */
+       if (readl(drv_data->ide_base + IDECTRL) & IDECTRL_INTRQ)
+               return ATA_DMA_INTR;
+
+       if (val & IDEUDMASTS_SBUSY || val & IDEUDMASTS_DMAIDE)
+               return ATA_DMA_ACTIVE;
+
+       return 0;
+}
+
+/* Note: original code is ata_sff_softreset */
+static int ep93xx_pata_softreset(struct ata_link *al, unsigned int *classes,
+                                unsigned long deadline)
+{
+       struct ata_port *ap = al->ap;
+       unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
+       unsigned int devmask = 0;
+       int rc;
+       u8 err;
+
+       /* determine if device 0/1 are present */
+       if (ep93xx_pata_device_is_present(ap, 0))
+               devmask |= (1 << 0);
+       if (slave_possible && ep93xx_pata_device_is_present(ap, 1))
+               devmask |= (1 << 1);
+
+       /* select device 0 again */
+       ap->ops->sff_dev_select(al->ap, 0);
+
+       /* issue bus reset */
+       rc = ep93xx_pata_bus_softreset(ap, devmask, deadline);
+       /* if link is ocuppied, -ENODEV too is an error */
+       if (rc && (rc != -ENODEV || sata_scr_valid(al))) {
+               ata_link_printk(al, KERN_ERR, "SRST failed (errno=%d)\n",
+                               rc);
+               return rc;
+       }
+
+       /* determine by signature whether we have ATA or ATAPI devices */
+       classes[0] = ata_sff_dev_classify(&al->device[0], devmask & (1 << 0),
+                                         &err);
+       if (slave_possible && err != 0x81)
+               classes[1] = ata_sff_dev_classify(&al->device[1],
+                                                 devmask & (1 << 1), &err);
+
+       return 0;
+}
+
+/* Note: original code is ata_sff_drain_fifo */
+static void ep93xx_pata_drain_fifo(struct ata_queued_cmd *qc)
+{
+       int count;
+       struct ata_port *ap;
+       struct ep93xx_pata_data *drv_data;
+
+       /* We only need to flush incoming data when a command was running */
+       if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
+               return;
+
+       ap = qc->ap;
+       drv_data = ap->host->private_data;
+       /* Drain up to 64K of data before we give up this recovery method */
+       for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
+                    && count < 65536; count += 2)
+               ep93xx_pata_read_reg(drv_data, IDECTRL_ADDR_DATA);
+
+       /* Can become DEBUG later */
+       if (count)
+               ata_port_printk(ap, KERN_DEBUG,
+                               "drained %d bytes to clear DRQ.\n", count);
+
+}
+
+static int ep93xx_pata_port_start(struct ata_port *ap)
+{
+       struct ep93xx_pata_data *drv_data = ap->host->private_data;
+
+       /*
+        * Set timings to safe values at startup (= number of ns from ATA
+        * specification), we'll switch to properly calculated values later.
+        */
+       drv_data->t = *ata_timing_find_mode(XFER_PIO_0);
+       return 0;
+}
+
+static struct scsi_host_template ep93xx_pata_sht = {
+       ATA_BASE_SHT(DRV_NAME),
+       /* ep93xx dma implementation limit */
+       .sg_tablesize           = 32,
+       /* ep93xx dma can't transfer 65536 bytes at once */
+       .dma_boundary           = 0x7fff,
+};
+
+static struct ata_port_operations ep93xx_pata_port_ops = {
+       .inherits               = &ata_bmdma_port_ops,
+
+       .qc_prep                = ata_noop_qc_prep,
+
+       .softreset              = ep93xx_pata_softreset,
+       .hardreset              = ATA_OP_NULL,
+
+       .sff_dev_select         = ep93xx_pata_dev_select,
+       .sff_set_devctl         = ep93xx_pata_set_devctl,
+       .sff_check_status       = ep93xx_pata_check_status,
+       .sff_check_altstatus    = ep93xx_pata_check_altstatus,
+       .sff_tf_load            = ep93xx_pata_tf_load,
+       .sff_tf_read            = ep93xx_pata_tf_read,
+       .sff_exec_command       = ep93xx_pata_exec_command,
+       .sff_data_xfer          = ep93xx_pata_data_xfer,
+       .sff_drain_fifo         = ep93xx_pata_drain_fifo,
+       .sff_irq_clear          = ATA_OP_NULL,
+
+       .set_piomode            = ep93xx_pata_set_piomode,
+
+       .bmdma_setup            = ep93xx_pata_dma_setup,
+       .bmdma_start            = ep93xx_pata_dma_start,
+       .bmdma_stop             = ep93xx_pata_dma_stop,
+       .bmdma_status           = ep93xx_pata_dma_status,
+
+       .cable_detect           = ata_cable_unknown,
+       .port_start             = ep93xx_pata_port_start,
+};
+
+static int __devinit ep93xx_pata_probe(struct platform_device *pdev)
+{
+       struct ep93xx_pata_data *drv_data;
+       struct ata_host *host;
+       struct ata_port *ap;
+       unsigned int irq;
+       struct resource *mem_res;
+       void __iomem *ide_base;
+       int err;
+
+       err = ep93xx_ide_acquire_gpio(pdev);
+       if (err)
+               return err;
+
+       /* INT[3] (IRQ_EP93XX_EXT3) line connected as pull down */
+       irq = platform_get_irq(pdev, 0);
+       if (irq < 0) {
+               err = -ENXIO;
+               goto err_rel_gpio;
+       }
+
+       mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!mem_res) {
+               err = -ENXIO;
+               goto err_rel_gpio;
+       }
+
+       ide_base = devm_request_and_ioremap(&pdev->dev, mem_res);
+       if (!ide_base) {
+               err = -ENXIO;
+               goto err_rel_gpio;
+       }
+
+       drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL);
+       if (!drv_data) {
+               err = -ENXIO;
+               goto err_rel_gpio;
+       }
+
+       platform_set_drvdata(pdev, drv_data);
+       drv_data->pdev = pdev;
+       drv_data->ide_base = ide_base;
+       drv_data->udma_in_phys = mem_res->start + IDEUDMADATAIN;
+       drv_data->udma_out_phys = mem_res->start + IDEUDMADATAOUT;
+       ep93xx_pata_dma_init(drv_data);
+
+       /* allocate host */
+       host = ata_host_alloc(&pdev->dev, 1);
+       if (!host) {
+               err = -ENXIO;
+               goto err_rel_dma;
+       }
+
+       ep93xx_pata_clear_regs(ide_base);
+
+       host->private_data = drv_data;
+
+       ap = host->ports[0];
+       ap->dev = &pdev->dev;
+       ap->ops = &ep93xx_pata_port_ops;
+       ap->flags |= ATA_FLAG_SLAVE_POSS;
+       ap->pio_mask = ATA_PIO4;
+
+       /*
+        * Maximum UDMA modes:
+        * EP931x rev.E0 - UDMA2
+        * EP931x rev.E1 - UDMA3
+        * EP931x rev.E2 - UDMA4
+        *
+        * MWDMA support was removed from EP931x rev.E2,
+        * so this driver supports only UDMA modes.
+        */
+       if (drv_data->dma_rx_channel && drv_data->dma_tx_channel) {
+               int chip_rev = ep93xx_chip_revision();
+
+               if (chip_rev == EP93XX_CHIP_REV_E1)
+                       ap->udma_mask = ATA_UDMA3;
+               else if (chip_rev == EP93XX_CHIP_REV_E2)
+                       ap->udma_mask = ATA_UDMA4;
+               else
+                       ap->udma_mask = ATA_UDMA2;
+       }
+
+       /* defaults, pio 0 */
+       ep93xx_pata_enable_pio(ide_base, 0);
+
+       dev_info(&pdev->dev, "version " DRV_VERSION "\n");
+
+       /* activate host */
+       err = ata_host_activate(host, irq, ata_bmdma_interrupt, 0,
+               &ep93xx_pata_sht);
+       if (err == 0)
+               return 0;
+
+err_rel_dma:
+       ep93xx_pata_release_dma(drv_data);
+err_rel_gpio:
+       ep93xx_ide_release_gpio(pdev);
+       return err;
+}
+
+static int __devexit ep93xx_pata_remove(struct platform_device *pdev)
+{
+       struct ata_host *host = platform_get_drvdata(pdev);
+       struct ep93xx_pata_data *drv_data = host->private_data;
+
+       ata_host_detach(host);
+       ep93xx_pata_release_dma(drv_data);
+       ep93xx_pata_clear_regs(drv_data->ide_base);
+       ep93xx_ide_release_gpio(pdev);
+       return 0;
+}
+
+static struct platform_driver ep93xx_pata_platform_driver = {
+       .driver = {
+               .name = DRV_NAME,
+               .owner = THIS_MODULE,
+       },
+       .probe = ep93xx_pata_probe,
+       .remove = __devexit_p(ep93xx_pata_remove),
+};
+
+module_platform_driver(ep93xx_pata_platform_driver);
+
+MODULE_AUTHOR("Alessandro Zummo, Lennert Buytenhek, Joao Ramos, "
+               "Bartlomiej Zolnierkiewicz, Rafal Prylowski");
+MODULE_DESCRIPTION("low-level driver for cirrus ep93xx IDE controller");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:pata_ep93xx");