S2io: Added support set_mac_address driver entry point

- Added set_mac_address driver entry point
- Copying permanent mac address to dev->perm_addr
- Incorporated following review comments from Jeff
     - Converted the macro to a function and removed call to memset
     - regarding function naming convention, for all callbacks and entry points
       will have 's2io_' prefix and helper functions will have 'do_s2io_' prefix.

Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 3885f6b..01e4b1c 100644 (file)
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -355,6 +355,16 @@ static char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
                        timer.data = (unsigned long) arg;       \
                        mod_timer(&timer, (jiffies + exp))      \
 
+/* copy mac addr to def_mac_addr array */
+static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr)
+{
+       sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr);
+       sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8);
+       sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16);
+       sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24);
+       sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32);
+       sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40);
+}
 /* Add the vlan */
 static void s2io_vlan_rx_register(struct net_device *dev,
                                        struct vlan_group *grp)
@@ -3412,7 +3422,7 @@ static void s2io_reset(struct s2io_nic * sp)
        }
 
        /* restore the previously assigned mac address */
-       s2io_set_mac_addr(sp->dev, (u8 *)&sp->def_mac_addr[0].mac_addr);
+       do_s2io_prog_unicast(sp->dev, (u8 *)&sp->def_mac_addr[0].mac_addr);
 
        sp->device_enabled_once = FALSE;
 }
@@ -3843,7 +3853,7 @@ static int s2io_open(struct net_device *dev)
                goto hw_init_failed;
        }
 
-       if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
+       if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) {
                DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
                s2io_card_down(sp);
                err = -ENODEV;
@@ -4845,8 +4855,48 @@ static void s2io_set_multicast(struct net_device *dev)
        }
 }
 
+/* add unicast MAC address to CAM */
+static int do_s2io_add_unicast(struct s2io_nic *sp, u64 addr, int off)
+{
+       u64 val64;
+       struct XENA_dev_config __iomem *bar0 = sp->bar0;
+
+       writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr),
+               &bar0->rmac_addr_data0_mem);
+
+       val64 =
+               RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
+               RMAC_ADDR_CMD_MEM_OFFSET(off);
+       writeq(val64, &bar0->rmac_addr_cmd_mem);
+
+       /* Wait till command completes */
+       if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
+               RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
+               S2IO_BIT_RESET)) {
+               DBG_PRINT(INFO_DBG, "add_mac_addr failed\n");
+               return FAILURE;
+       }
+       return SUCCESS;
+}
+
+/**
+ * s2io_set_mac_addr driver entry point
+ */
+static int s2io_set_mac_addr(struct net_device *dev, void *p)
+{
+       struct sockaddr *addr = p;
+
+       if (!is_valid_ether_addr(addr->sa_data))
+               return -EINVAL;
+
+       memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+       /* store the MAC address in CAM */
+       return (do_s2io_prog_unicast(dev, dev->dev_addr));
+}
+
 /**
- *  s2io_set_mac_addr - Programs the Xframe mac address
+ *  do_s2io_prog_unicast - Programs the Xframe mac address
  *  @dev : pointer to the device structure.
  *  @addr: a uchar pointer to the new mac address which is to be set.
  *  Description : This procedure will program the Xframe to receive
@@ -4854,56 +4904,31 @@ static void s2io_set_multicast(struct net_device *dev)
  *  Return value: SUCCESS on success and an appropriate (-)ve integer
  *  as defined in errno.h file on failure.
  */
-
-static int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
+static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
 {
        struct s2io_nic *sp = dev->priv;
-       struct XENA_dev_config __iomem *bar0 = sp->bar0;
-       register u64 val64, mac_addr = 0;
+       register u64 mac_addr = 0, perm_addr = 0;
        int i;
-       u64 old_mac_addr = 0;
 
        /*
-        * Set the new MAC address as the new unicast filter and reflect this
-        * change on the device address registered with the OS. It will be
-        * at offset 0.
-        */
+       * Set the new MAC address as the new unicast filter and reflect this
+       * change on the device address registered with the OS. It will be
+       * at offset 0.
+       */
        for (i = 0; i < ETH_ALEN; i++) {
                mac_addr <<= 8;
                mac_addr |= addr[i];
-               old_mac_addr <<= 8;
-               old_mac_addr |= sp->def_mac_addr[0].mac_addr[i];
+               perm_addr <<= 8;
+               perm_addr |= sp->def_mac_addr[0].mac_addr[i];
        }
 
-       if(0 == mac_addr)
+       /* check if the dev_addr is different than perm_addr */
+       if (mac_addr == perm_addr)
                return SUCCESS;
 
        /* Update the internal structure with this new mac address */
-       if(mac_addr != old_mac_addr) {
-               memset(sp->def_mac_addr[0].mac_addr, 0, sizeof(ETH_ALEN));
-               sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_addr);
-               sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_addr >> 8);
-               sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_addr >> 16);
-               sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_addr >> 24);
-               sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_addr >> 32);
-               sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_addr >> 40);
-       }
-
-       writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
-              &bar0->rmac_addr_data0_mem);
-
-       val64 =
-           RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
-           RMAC_ADDR_CMD_MEM_OFFSET(0);
-       writeq(val64, &bar0->rmac_addr_cmd_mem);
-       /* Wait till command completes */
-       if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
-                     RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING, S2IO_BIT_RESET)) {
-               DBG_PRINT(ERR_DBG, "%s: set_mac_addr failed\n", dev->name);
-               return FAILURE;
-       }
-
-       return SUCCESS;
+       do_s2io_copy_mac_addr(sp, 0, mac_addr);
+       return (do_s2io_add_unicast(sp, mac_addr, 0));
 }
 
 /**
@@ -7530,6 +7555,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
        dev->get_stats = &s2io_get_stats;
        dev->set_multicast_list = &s2io_set_multicast;
        dev->do_ioctl = &s2io_ioctl;
+       dev->set_mac_address = &s2io_set_mac_addr;
        dev->change_mtu = &s2io_change_mtu;
        SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
        dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
@@ -7615,6 +7641,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
        /*  Set the factory defined MAC address initially   */
        dev->addr_len = ETH_ALEN;
        memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
+       memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
 
         /* Store the values of the MSIX table in the s2io_nic structure */
        store_xmsi_data(sp);

diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 9b645f4..f6b4556 100644 (file)
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -1047,7 +1047,7 @@ static void s2io_link(struct s2io_nic * sp, int link);
 static void s2io_reset(struct s2io_nic * sp);
 static int s2io_poll(struct napi_struct *napi, int budget);
 static void s2io_init_pci(struct s2io_nic * sp);
-static int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
+static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr);
 static void s2io_alarm_handle(unsigned long data);
 static irqreturn_t
 s2io_msix_ring_handle(int irq, void *dev_id);