arm: meson: remove static ethernet link setup

The static ethernet link type config code is no more needed because now handled by
the meson8b glue driver, delete it.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

diff --git a/arch/arm/include/asm/arch-meson/axg.h b/arch/arm/include/asm/arch-meson/axg.h
index 91c8769..12042de 100644 (file)
--- a/arch/arm/include/asm/arch-meson/axg.h
+++ b/arch/arm/include/asm/arch-meson/axg.h
@@ -31,26 +31,4 @@
 #define AXG_AO_BL31_RSVMEM_SIZE_SHIFT  16
 #define AXG_AO_BL32_RSVMEM_SIZE_MASK   0xFFFF
 
-/* Peripherals registers */
-#define AXG_PERIPHS_ADDR(off)  (AXG_PERIPHS_BASE + ((off) << 2))
-
-#define AXG_ETH_REG_0          AXG_PERIPHS_ADDR(0x50)
-#define AXG_ETH_REG_1          AXG_PERIPHS_ADDR(0x51)
-
-#define AXG_ETH_REG_0_PHY_INTF_RGMII   BIT(0)
-#define AXG_ETH_REG_0_PHY_INTF_RMII    BIT(2)
-#define AXG_ETH_REG_0_TX_PHASE(x)      (((x) & 3) << 5)
-#define AXG_ETH_REG_0_TX_RATIO(x)      (((x) & 7) << 7)
-#define AXG_ETH_REG_0_PHY_CLK_EN       BIT(10)
-#define AXG_ETH_REG_0_INVERT_RMII_CLK  BIT(11)
-#define AXG_ETH_REG_0_CLK_EN           BIT(12)
-
-/* HIU registers */
-#define AXG_HIU_ADDR(off)      (AXG_HIU_BASE + ((off) << 2))
-
-#define AXG_MEM_PD_REG_0       AXG_HIU_ADDR(0x40)
-
-/* Ethernet memory power domain */
-#define AXG_MEM_PD_REG_0_ETH_MASK      (BIT(2) | BIT(3))
-
 #endif /* __AXG_H__ */

diff --git a/arch/arm/include/asm/arch-meson/eth.h b/arch/arm/include/asm/arch-meson/eth.h
index f765cd7..c007061 100644 (file)
--- a/arch/arm/include/asm/arch-meson/eth.h
+++ b/arch/arm/include/asm/arch-meson/eth.h
@@ -7,18 +7,6 @@
 #ifndef __MESON_ETH_H__
 #define __MESON_ETH_H__
 
-#include <phy.h>
-
-enum {
-       /* Use Internal RMII PHY */
-       MESON_USE_INTERNAL_RMII_PHY = 1,
-};
-
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_eth_init(phy_interface_t mode, unsigned int flags);
-
 /* Generate an unique MAC address based on the HW serial */
 int meson_generate_serial_ethaddr(void);
 

diff --git a/arch/arm/include/asm/arch-meson/g12a.h b/arch/arm/include/asm/arch-meson/g12a.h
index db29cc3..ef4f301 100644 (file)
--- a/arch/arm/include/asm/arch-meson/g12a.h
+++ b/arch/arm/include/asm/arch-meson/g12a.h
@@ -32,39 +32,4 @@
 #define G12A_AO_BL31_RSVMEM_SIZE_SHIFT 16
 #define G12A_AO_BL32_RSVMEM_SIZE_MASK  0xFFFF
 
-/* Peripherals registers */
-#define G12A_PERIPHS_ADDR(off) (G12A_PERIPHS_BASE + ((off) << 2))
-
-#define G12A_ETH_REG_0                 G12A_PERIPHS_ADDR(0x50)
-#define G12A_ETH_REG_1                 G12A_PERIPHS_ADDR(0x51)
-
-#define G12A_ETH_REG_0_PHY_INTF_RGMII  BIT(0)
-#define G12A_ETH_REG_0_PHY_INTF_RMII   BIT(2)
-#define G12A_ETH_REG_0_TX_PHASE(x)     (((x) & 3) << 5)
-#define G12A_ETH_REG_0_TX_RATIO(x)     (((x) & 7) << 7)
-#define G12A_ETH_REG_0_PHY_CLK_EN      BIT(10)
-#define G12A_ETH_REG_0_INVERT_RMII_CLK BIT(11)
-#define G12A_ETH_REG_0_CLK_EN          BIT(12)
-
-#define G12A_ETH_PHY_ADDR(off) (G12A_ETH_PHY_BASE + ((off) << 2))
-#define ETH_PLL_CNTL0                  G12A_ETH_PHY_ADDR(0x11)
-#define ETH_PLL_CNTL1                  G12A_ETH_PHY_ADDR(0x12)
-#define ETH_PLL_CNTL2                  G12A_ETH_PHY_ADDR(0x13)
-#define ETH_PLL_CNTL3                  G12A_ETH_PHY_ADDR(0x14)
-#define ETH_PLL_CNTL4                  G12A_ETH_PHY_ADDR(0x15)
-#define ETH_PLL_CNTL5                  G12A_ETH_PHY_ADDR(0x16)
-#define ETH_PLL_CNTL6                  G12A_ETH_PHY_ADDR(0x17)
-#define ETH_PLL_CNTL7                  G12A_ETH_PHY_ADDR(0x18)
-#define ETH_PHY_CNTL0                  G12A_ETH_PHY_ADDR(0x20)
-#define ETH_PHY_CNTL1                  G12A_ETH_PHY_ADDR(0x21)
-#define ETH_PHY_CNTL2                  G12A_ETH_PHY_ADDR(0x22)
-
-/* HIU registers */
-#define G12A_HIU_ADDR(off)     (G12A_HIU_BASE + ((off) << 2))
-
-#define G12A_MEM_PD_REG_0              G12A_HIU_ADDR(0x40)
-
-/* Ethernet memory power domain */
-#define G12A_MEM_PD_REG_0_ETH_MASK     (BIT(2) | BIT(3))
-
 #endif /* __G12A_H__ */

diff --git a/arch/arm/include/asm/arch-meson/gx.h b/arch/arm/include/asm/arch-meson/gx.h
index 743d2e8..26ec5d0 100644 (file)
--- a/arch/arm/include/asm/arch-meson/gx.h
+++ b/arch/arm/include/asm/arch-meson/gx.h
@@ -41,24 +41,4 @@
 #define GX_GPIO_IN(n)          GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 1)
 #define GX_GPIO_OUT(n) GX_PERIPHS_ADDR(_GX_GPIO_OFF(n) + 2)
 
-#define GX_ETH_REG_0           GX_PERIPHS_ADDR(0x50)
-#define GX_ETH_REG_1           GX_PERIPHS_ADDR(0x51)
-#define GX_ETH_REG_2           GX_PERIPHS_ADDR(0x56)
-#define GX_ETH_REG_3           GX_PERIPHS_ADDR(0x57)
-
-#define GX_ETH_REG_0_PHY_INTF          BIT(0)
-#define GX_ETH_REG_0_TX_PHASE(x)       (((x) & 3) << 5)
-#define GX_ETH_REG_0_TX_RATIO(x)       (((x) & 7) << 7)
-#define GX_ETH_REG_0_PHY_CLK_EN        BIT(10)
-#define GX_ETH_REG_0_INVERT_RMII_CLK   BIT(11)
-#define GX_ETH_REG_0_CLK_EN            BIT(12)
-
-/* HIU registers */
-#define GX_HIU_ADDR(off)       (GX_HIU_BASE + ((off) << 2))
-
-#define GX_MEM_PD_REG_0        GX_HIU_ADDR(0x40)
-
-/* Ethernet memory power domain */
-#define GX_MEM_PD_REG_0_ETH_MASK       (BIT(2) | BIT(3))
-
 #endif /* __GX_H__ */

diff --git a/arch/arm/mach-meson/board-axg.c b/arch/arm/mach-meson/board-axg.c
index 3b14bc9..71ac65c 100644 (file)
--- a/arch/arm/mach-meson/board-axg.c
+++ b/arch/arm/mach-meson/board-axg.c
@@ -91,40 +91,6 @@ static struct mm_region axg_mem_map[] = {
 
 struct mm_region *mem_map = axg_mem_map;
 
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_eth_init(phy_interface_t mode, unsigned int flags)
-{
-       switch (mode) {
-       case PHY_INTERFACE_MODE_RGMII:
-       case PHY_INTERFACE_MODE_RGMII_ID:
-       case PHY_INTERFACE_MODE_RGMII_RXID:
-       case PHY_INTERFACE_MODE_RGMII_TXID:
-               /* Set RGMII mode */
-               setbits_le32(AXG_ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RGMII |
-                            AXG_ETH_REG_0_TX_PHASE(1) |
-                            AXG_ETH_REG_0_TX_RATIO(4) |
-                            AXG_ETH_REG_0_PHY_CLK_EN |
-                            AXG_ETH_REG_0_CLK_EN);
-               break;
-
-       case PHY_INTERFACE_MODE_RMII:
-               /* Set RMII mode */
-               out_le32(AXG_ETH_REG_0, AXG_ETH_REG_0_PHY_INTF_RMII |
-                                       AXG_ETH_REG_0_INVERT_RMII_CLK |
-                                       AXG_ETH_REG_0_CLK_EN);
-               break;
-
-       default:
-               printf("Invalid Ethernet interface mode\n");
-               return;
-       }
-
-       /* Enable power gate */
-       clrbits_le32(AXG_MEM_PD_REG_0, AXG_MEM_PD_REG_0_ETH_MASK);
-}
-
 #if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \
        CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
 static struct dwc2_plat_otg_data meson_gx_dwc2_data;

diff --git a/arch/arm/mach-meson/board-g12a.c b/arch/arm/mach-meson/board-g12a.c
index cc7e01d..2e59eee 100644 (file)
--- a/arch/arm/mach-meson/board-g12a.c
+++ b/arch/arm/mach-meson/board-g12a.c
@@ -97,37 +97,6 @@ static struct mm_region g12a_mem_map[] = {
 
 struct mm_region *mem_map = g12a_mem_map;
 
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_eth_init(phy_interface_t mode, unsigned int flags)
-{
-       switch (mode) {
-       case PHY_INTERFACE_MODE_RGMII:
-       case PHY_INTERFACE_MODE_RGMII_ID:
-       case PHY_INTERFACE_MODE_RGMII_RXID:
-       case PHY_INTERFACE_MODE_RGMII_TXID:
-               /* Set RGMII mode */
-               setbits_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RGMII |
-                            G12A_ETH_REG_0_TX_PHASE(1) |
-                            G12A_ETH_REG_0_TX_RATIO(4) |
-                            G12A_ETH_REG_0_PHY_CLK_EN |
-                            G12A_ETH_REG_0_CLK_EN);
-               break;
-
-       case PHY_INTERFACE_MODE_RMII:
-               /* Set RMII mode */
-               out_le32(G12A_ETH_REG_0, G12A_ETH_REG_0_PHY_INTF_RMII |
-                                       G12A_ETH_REG_0_INVERT_RMII_CLK |
-                                       G12A_ETH_REG_0_CLK_EN);
-               break;
-
-       default:
-               printf("Invalid Ethernet interface mode\n");
-               return;
-       }
-}
-
 #if CONFIG_IS_ENABLED(USB_DWC3_MESON_G12A) && \
        CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
 static struct dwc2_plat_otg_data meson_g12a_dwc2_data;

diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c
index cae7af5..01fafd8 100644 (file)
--- a/arch/arm/mach-meson/board-gx.c
+++ b/arch/arm/mach-meson/board-gx.c
@@ -109,41 +109,6 @@ static struct mm_region gx_mem_map[] = {
 
 struct mm_region *mem_map = gx_mem_map;
 
-/* Configure the Ethernet MAC with the requested interface mode
- * with some optional flags.
- */
-void meson_eth_init(phy_interface_t mode, unsigned int flags)
-{
-       switch (mode) {
-       case PHY_INTERFACE_MODE_RGMII:
-       case PHY_INTERFACE_MODE_RGMII_ID:
-       case PHY_INTERFACE_MODE_RGMII_RXID:
-       case PHY_INTERFACE_MODE_RGMII_TXID:
-               /* Set RGMII mode */
-               setbits_le32(GX_ETH_REG_0, GX_ETH_REG_0_PHY_INTF |
-                            GX_ETH_REG_0_TX_PHASE(1) |
-                            GX_ETH_REG_0_TX_RATIO(4) |
-                            GX_ETH_REG_0_PHY_CLK_EN |
-                            GX_ETH_REG_0_CLK_EN);
-
-               break;
-
-       case PHY_INTERFACE_MODE_RMII:
-               /* Set RMII mode */
-               out_le32(GX_ETH_REG_0, GX_ETH_REG_0_INVERT_RMII_CLK |
-                                        GX_ETH_REG_0_CLK_EN);
-
-               if (!IS_ENABLED(CONFIG_MESON_GXBB))
-                       writel(0x10110181, GX_ETH_REG_2);
-
-               break;
-
-       default:
-               printf("Invalid Ethernet interface mode\n");
-               return;
-       }
-}
-
 #if CONFIG_IS_ENABLED(USB_DWC3_MESON_GXL) && \
        CONFIG_IS_ENABLED(USB_GADGET_DWC2_OTG)
 static struct dwc2_plat_otg_data meson_gx_dwc2_data;

diff --git a/board/amlogic/beelink-s922x/beelink-s922x.c b/board/amlogic/beelink-s922x/beelink-s922x.c
index dc0d933..bb74426 100644 (file)
--- a/board/amlogic/beelink-s922x/beelink-s922x.c
+++ b/board/amlogic/beelink-s922x/beelink-s922x.c
@@ -28,8 +28,6 @@ int misc_init_r(void)
            meson_get_soc_rev(tmp, sizeof(tmp)) > 0)
                env_set("soc_rev", tmp);
 
-       meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
        if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
                                          efuse_mac_addr, EFUSE_MAC_SIZE);

diff --git a/board/amlogic/odroid-n2/odroid-n2.c b/board/amlogic/odroid-n2/odroid-n2.c
index 863975e..88a60f3 100644 (file)
--- a/board/amlogic/odroid-n2/odroid-n2.c
+++ b/board/amlogic/odroid-n2/odroid-n2.c
@@ -115,8 +115,6 @@ int misc_init_r(void)
            meson_get_soc_rev(tmp, sizeof(tmp)) > 0)
                env_set("soc_rev", tmp);
 
-       meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
        if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
                                          efuse_mac_addr, EFUSE_MAC_SIZE);

diff --git a/board/amlogic/p200/p200.c b/board/amlogic/p200/p200.c
index 8f1bf8b..7c432f9 100644 (file)
--- a/board/amlogic/p200/p200.c
+++ b/board/amlogic/p200/p200.c
@@ -25,8 +25,6 @@ int misc_init_r(void)
        char serial[EFUSE_SN_SIZE];
        ssize_t len;
 
-       meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
        if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
                                          mac_addr, EFUSE_MAC_SIZE);

diff --git a/board/amlogic/p201/p201.c b/board/amlogic/p201/p201.c
index 597bb71..7c432f9 100644 (file)
--- a/board/amlogic/p201/p201.c
+++ b/board/amlogic/p201/p201.c
@@ -25,8 +25,6 @@ int misc_init_r(void)
        char serial[EFUSE_SN_SIZE];
        ssize_t len;
 
-       meson_eth_init(PHY_INTERFACE_MODE_RMII, 0);
-
        if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
                                          mac_addr, EFUSE_MAC_SIZE);

diff --git a/board/amlogic/p212/p212.c b/board/amlogic/p212/p212.c
index fbc49e9..fcef90b 100644 (file)
--- a/board/amlogic/p212/p212.c
+++ b/board/amlogic/p212/p212.c
@@ -26,9 +26,6 @@ int misc_init_r(void)
        char serial[EFUSE_SN_SIZE];
        ssize_t len;
 
-       meson_eth_init(PHY_INTERFACE_MODE_RMII,
-                      MESON_USE_INTERNAL_RMII_PHY);
-
        if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
                                          mac_addr, EFUSE_MAC_SIZE);

diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c
index 62e6fa3..3aa6d8f 100644 (file)
--- a/board/amlogic/q200/q200.c
+++ b/board/amlogic/q200/q200.c
@@ -26,8 +26,6 @@ int misc_init_r(void)
        char serial[EFUSE_SN_SIZE];
        ssize_t len;
 
-       meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
        if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
                                          mac_addr, EFUSE_MAC_SIZE);

diff --git a/board/amlogic/s400/s400.c b/board/amlogic/s400/s400.c
index b081942..06a9044 100644 (file)
--- a/board/amlogic/s400/s400.c
+++ b/board/amlogic/s400/s400.c
@@ -16,8 +16,6 @@
 
 int misc_init_r(void)
 {
-       meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
        meson_generate_serial_ethaddr();
 
        return 0;

diff --git a/board/amlogic/sei510/sei510.c b/board/amlogic/sei510/sei510.c
index 5a5148e..bb188c2 100644 (file)
--- a/board/amlogic/sei510/sei510.c
+++ b/board/amlogic/sei510/sei510.c
@@ -18,9 +18,6 @@
 
 int misc_init_r(void)
 {
-       meson_eth_init(PHY_INTERFACE_MODE_RMII,
-                      MESON_USE_INTERNAL_RMII_PHY);
-
        meson_generate_serial_ethaddr();
 
        env_set("serial#", "AMLG12ASEI510");

diff --git a/board/amlogic/sei610/sei610.c b/board/amlogic/sei610/sei610.c
index 27dba93..6490bac 100644 (file)
--- a/board/amlogic/sei610/sei610.c
+++ b/board/amlogic/sei610/sei610.c
@@ -18,9 +18,6 @@
 
 int misc_init_r(void)
 {
-       meson_eth_init(PHY_INTERFACE_MODE_RMII,
-                      MESON_USE_INTERNAL_RMII_PHY);
-
        meson_generate_serial_ethaddr();
 
        env_set("serial#", "AMLG12ASEI610");

diff --git a/board/amlogic/u200/u200.c b/board/amlogic/u200/u200.c
index 373235d..06a9044 100644 (file)
--- a/board/amlogic/u200/u200.c
+++ b/board/amlogic/u200/u200.c
@@ -16,8 +16,7 @@
 
 int misc_init_r(void)
 {
-       meson_eth_init(PHY_INTERFACE_MODE_RMII,
-                      MESON_USE_INTERNAL_RMII_PHY);
+       meson_generate_serial_ethaddr();
 
        return 0;
 }

diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c
index 7b09617..6cd5f2e 100644 (file)
--- a/board/amlogic/vim3/vim3.c
+++ b/board/amlogic/vim3/vim3.c
@@ -149,8 +149,6 @@ int misc_init_r(void)
        char efuse_mac_addr[EFUSE_MAC_SIZE], tmp[3];
        ssize_t len;
 
-       meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
-
        if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
                len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
                                          efuse_mac_addr, EFUSE_MAC_SIZE);

diff --git a/board/amlogic/w400/w400.c b/board/amlogic/w400/w400.c
index 47a5171..4199198 100644 (file)
--- a/board/amlogic/w400/w400.c
+++ b/board/amlogic/w400/w400.c
@@ -14,7 +14,7 @@
 
 int misc_init_r(void)
 {
-       meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
+       meson_generate_serial_ethaddr();
 
        return 0;
 }